常态中子深度分析物理模型

带电离子在样品内输运过程中的能量岐离、探测立体角有效范围及探测系统噪声都将改变中子深度分析（NDP）的多道离子能谱分布。假定上述三种因素导致的离子探测谱能量展宽都可以采用高斯函数描述,基于一般条件下的NDP装置设计,建立了预测一定深度核素产生的离子测量谱的探测器响应函数物理模型。该模型的理论分析结果与实验测量能谱的峰位、半高宽均符合良好,能够作为中子深度分析测量谱反演分析的基础。     

Expanding the metrology of Coulombic efficiency using neutron depth profiling

The metrology of Coulombic efficiency (CE) is widely used for the qualification of rechargeable batteries particularly in assessing their state of health and the expected lifetime. The quantity of CE is conventionally defined as the ratio of the electric charge capacity in one round-trip cycle of discharge and charge of a battery. For better diagnosis of the health, failure and lifetime of rechargeable batteries, it is desirable to expand the traditional CE of the round-trip electric charge to including that of the round-trip CE of ionic charges as well as those of single trip CEs of ionic/electric charges for charging and electric/ionic charges for discharging. To enable such expansion, in operando ion metrology is needed. For the mainstream technology of lithium-containing batteries, neutron depth profiling is one of the techniques suited for Li ion metrology. In this report, we demonstrate the application of in situ neutron depth profiling to expanding the metrology of Coulombic efficiencies to include all four CEs. The methodology of expanded CE is exemplified using measurements and analyses on a model battery of LiFePO₄ vs. Li.     

Lithium diffusion in polyether ether ketone and polyimide stimulated by in situ electron irradiation and studied by the neutron depth profiling method

Diffusion of lithium from a LiCl aqueous solution into polyether ether ketone (PEEK) and polyimide (PI) assisted by in situ irradiation with 6.5?MeV electrons was studied by the neutron depth profiling method. The number of the Li atoms was found to be roughly proportional to the diffusion time. Regardless of the diffusion time, the measured depth profiles in PEEK exhibit a nearly exponential form, indicating achievement of a steady-state phase of a diffusion–reaction process specified in the text. The form of the profiles in PI is more complex and it depends strongly on the diffusion time. For the longer diffusion time, the profile consists of near-surface bell-shaped part due to Fickian-like diffusion and deeper exponential part.     

Determination of one‐dimensional spherically aberrated point spread function in depth profiling by confocal Raman microscopy

We present a simple experiment that allows the complete and direct characterization of the point spread function (PSF) in refraction‐aberrated depth profiling experiments with confocal Raman microscopy. We used a wedge‐shaped solid polymer film to induce refraction aberrations on the response of an infinitesimally thin Raman scatterer, represented by a polished silicon wafer. The system, with the film pasted on top of the Si wafer, was probed by a depth slicing technique under a dry‐optics configuration. Post‐acquisition processing of the Si and polymer intensity maps allowed the reconstruction of the axial PSF spatially resolved each 1 µm or less in the z‐axis and for virtually continuous values of focusing depth. In agreement with theory, we found that PSF broadens asymmetrically with focusing depth, with a marked shift in the focus point. From the shape of PSF, we obtained values of depth resolution within the film that confirm that axial discrimination is not drastically deteriorated, as suggested by previous works, and that confocal aperture effectively reduces the collection volume even under severe refraction interference. Copyright © 2013 John Wiley & Sons, Ltd.     

超薄Fe(4(A))膜磁特性极化中子反射研究

利用分子束外延薄膜生长技术,制备了200 (A)V/4 (A) Fe/900 V/MgO(100)薄膜样品,通过X射线反射和极化中子反射两种测量手段获得了薄膜的表面、界面及各层膜厚的相关结构信息.中子反射结果表明,Fe原子磁矩在室温下约为1.0±0.1μB,随着温度的降低,Fe原子磁矩增加,在10 K时达到1.5±0.1μB.利用指数定律拟合磁矩随温度的变化情况,外推得出4(A)铁薄膜样品的居里温度约为310±30 K.

Abstract：

Uhrathin Fe film 200 (A)V/4 (A)Fe/900 (A)V/MgO(100) has been prepared by molecular beam epitaxy (MBE). The structure parameters, such as the surface and interface roughness and the thickness of each layer, were obtained by X-ray and neutron reflectivity measurement. The magnetic properties of the thin Fe layer were investigated by polarized neutron reflectometry at different temperature. The result shows that the magnetic moment of an Fe atom is about 1.0 ± 0.1 μB at room temperature and increases to 1.5 ±0.1 μBat 10 K. The Curie temperature of the thin Fe film is estimated to be 310 ± 30 K.     

Study of water uptake in poly(ether ether ketone) irradiated by MeV O+ and Au+ ions

Poly(ether ether ketone) (PEEK) was irradiated with 4?MeV O⁺ and 5 and 10?MeV Au⁺ ions to the fluences from 10¹² to 10^14?cm^?2 and then treated in 5 M/l water solution of LiCl for one month at room temperature. After drying and removal of LiCl surface contamination, the depth distribution of LiCl embeded in PEEK was measured by the neutron depth profilig method (NDP) sensitive to ⁶Li isotope. Embeded LiCl is believed to map distribution of water diffusing into PEEK interior. The results show that the PEEK irradiated to the fluences above 1.10¹³cm^?2 is prone to water penetration to the depths of few microns. On the pristine PEEK and that irradiated to lower ion fluences only a surface Li contamination is observed.     

材料中He深度分布演化的Monte Carlo模拟研究

基于He泡生长的迁移-合并机理,用Monte Carlo方法模拟了对材料进行等温退火过程中He深度分布的演化,探讨了不同参数对这一演化的影响.研究表明:材料中He泡的初始浓度和尺寸将影响He深度分布的变化,而退火温度则对演化速率起重要作用但对最终的He深度分布影响较小;随着反应的进行,整个系统的演化是逐渐趋缓的. 关键词： He 深度分布 Monte Carlo模拟     

ICF中子产额测量中统计涨落分析及计算

塑料闪烁探测器通常用来测量氘氘、氘氚聚变中子产额。中子在闪烁体中产生的质子数的统计涨落及质子在闪烁体中沉积能量的统计涨落为测量结果引入了两项不确定度分量。以氘氚聚变中子为例,分析了这两种统计涨落的概率密度函数的计算方法,该计算方法也适用于其它能量的单能快中子和塑料闪烁体作用的相应计算。     

大爆炸核合成相关的8Li(d,p)9Li反应截面测量

利用8Li次级束测量了质心系能量7.8 MeV2H(8Li, 9Li)1H反应的角分布，导出了8Li(d, p)9Li反应的天体物理S因子及9Li→8Li+n虚衰变的渐近归一化系数. We have measured the angular distribution of 2H(8Li,9Li)1H at Ecm= 7.8 MeV and deduced the astrophysical S factor of 8Li(d, p)9Li reaction as well as the Asymptotic Normalization Coefficient (ANC) for 9Li → 8Li+n virtual decay.     

ICF中子产额测量中统计涨落分析及计算

 塑料闪烁探测器通常用来测量氘氘、氘氚聚变中子产额。中子在闪烁体中产生的质子数的统计涨落及质子在闪烁体中沉积能量的统计涨落为测量结果引入了两项不确定度分量。以氘氚聚变中子为例,分析了这两种统计涨落的概率密度函数的计算方法,该计算方法也适用于其它能量的单能快中子和塑料闪烁体作用的相应计算。     

Chemical depth profiling and 3D reconstruction of III–V heterostructures selectively grown on non‐planar Si substrates by MOCVD

The chemical characterization of novel 3D architectures with nanometre‐scale dimensions is extremely challenging. The chemical composition of InGaAs/AlAs quantum wells selectively grown in SiO₂ trenches, 100–300 nm wide, is studied. Combining high lateral resolution 3D ToF‐SIMS analysis and Auger measurements, the chemical composition of individual trenches was obtained confirming the uniformity of these III–V heterostructures. These results correlate well with an average approach using SIMS depth profiling. The effects of ion beam orientation on the surface topography of confined structures were highlighted. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Distribution of lithium in doped nuclear pores of polyethylene terephthalate by neutron depth profiling

In this paper, doping of porous polyethylene terephthalate membrane using Li-based solution is described and analyzed by nuclear analytic methods. In recent years, the polymeric porous membranes have been studied as advanced battery separators in various applications, such as portable electronic devices or electric vehicles. Apart from mechanical stability, the separators also provide electrical separation and ionic transport between the electrodes during charging and discharging processes. For application of the membranes, it is important to follow the Li distribution in the separator material over time. In this work, the distribution of Li in the porous PET foils, adepts for Li ion battery separators, was analyzed by Neutron Depth Profiling and the 3D shape of the etched pores by Ion Transmission Spectroscopy. The data obtained show that Li can be incorporated, in a passive way in the micropores in large quantities, but its amount is still limited and does not depend on time of doping. Here, the first data are presented.     

Angular distribution measurements of Li(p,α)He reaction at 140 keV proton energy using nuclear track detectors

Angular distributions of a ⁶Li(p,α) ³He reaction were measured at six angles for 140 keV proton energy using nuclear track detectors (NTDs). The measurements were carried out over 60°–160° lab. angles in 20° increments using a scattering chamber of 80° beam line of the 350 kV accelerator. A semiconductor silicon surface barrier (SSB) detector was placed at +160° and was used as a monitor. The results have shown that the CR-39 detector has excellent capabilities to distinguish 1.4–2.7 MeV α+ ³He particles from the ⁶Li(p,α) ³He reaction and 8–9.4 MeV α-particles from the ⁷Li(p,α) ⁴He reaction through their track diameters. However, it was not possible to distinguish between the 2.3 MeV ³He ions and the 1.7 MeV ⁴He ions from the ⁶Li(p,α) ³He reaction from their track diameter measurements, but it was possible to differentiate between the two, from the darker contrast of the ³He particles caused by its deeper tracks as compared to those of ⁴He.     

Synthesis of VO2 (B) nanorods for Li battery application

Vanadium dioxide nanorods were synthesized through a hydrothermal reaction from V₂O₅ xerogel, poly(vinyl pyrrolidone) (PVP) and lithium perchlorate (LiClO₄). The prepared samples were characterized by X-ray diffraction, infrared spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and electrochemical discharge–charge cycling in lithium battery. SEM images reveal the nanorods to have dimensions on the order of 1–3 μm in length and 10–50 nm in diameter. The measured initial discharge capacity of the lithium battery with a cathode made of VO₂ (B) nanorods was 152 mA h/g.     

用多群蒙特卡罗方法计算快中子核临界K_(eff)和通量密度

用多群蒙特卡罗方法对快中子核裂变系统进行了临界计算。有效增殖因子κｅｆｆ的计算值与实验结果符合。计算所得中子通量密度的空间分布在球形裂变系统中随半径增大单调下降。中子通量密度的能量分布在由高浓缩铀组成的活性区内里单一能量极大值,其对应能量对于裸球核裂变系统和具有反射层裂变系统分别为０．３５ＭｅＶ和０．２５ＭｅＶ,而在由天然铀组成的反射层中在０．１ＭｅＶ附近出现能量双峰。由通量密度所得中子能谱在无反射层球形裂变系统中随半径增加变硬,在有反射层球形裂变系统中随半径增加变软。     

Langevin study of neutron emission in the reactions ^16O＋^181Ta and ^19F＋^178Hf^＊

The pre-scission neutrons measured in the reactions 16O 181Ta and 19F 178Hf are studied via a Langevin equation coupled with a statistical decay model. We find that because of the mass asymmetry of different entrance channels, the spin distributions of compound nuclei would be different, consequently, the measured neutrons in these two reactions would also different. This means that the entrance channel will affect the particle emission in the fission process of hot nuclei.     

Effect of C60 ion sputtering on the compositional depth profiling in XPS for Li(Ni,Co,Mn)O2 electrodes

The performance of a Li-ion cell strongly depends on the solid-electrolyte interface (SEI) on electrodes. The depth distribution of composition in SEI is normally determined by means of X-ray Photoelectron Spectroscopy (XPS) via Ar ion sputtering. Recently, a new kind of ion gun using C60 ions as sputtering source was introduced. In this report, a comparison between the effects of these two kinds of ion guns on the quantification of Li(Ni,Co,Mn)O₂ electrodes was made. It was found that the C60 ion gun is more suitable for analyzing the composition and chemical state of Li(Ni,Co,Mn)O₂ electrode since that it causes lower chemical damage in the superficial layer.     

Measurement of momentum distribution of lightatoms and molecules in condensed matter systems using inelastic neutron scattering

Studies of single-particle momentum distributions in light atoms and molecules are reviewed with specific emphasis on experimental measurements using the deep inelastic neutron scattering technique at eV energies. The technique has undergone a remarkable development since the mid-1980s, when intense fluxes of epithermal neutrons were made available from pulsed neutron sources. These types of measurements provide a probe of the short-time dynamics of the recoiling atoms or molecules as well as information on the local structure of the materials. The paper introduces both the theoretical framework for the interpretation of deep inelastic neutron scattering experiments and thoroughly illustrates the physical principles underlying the impulse approximation from light atoms and molecules. The most relevant experimental studies performed on a variety of condensed matter systems in the last 20 years are reviewed. The experimental technique is critically presented in the context of a full list of published work. It is shown how, in some cases, these measurements can be used to extract directly the effective Born–Oppenheimer potential. A summary of the progress made to date in instrument development is also provided. Current data analysis and the interpretation of the results for a variety of physical systems is chosen to illustrate the scope and power of the method. The review ends with a brief consideration of likely developments in the foreseeable future. Particular discussion is given to the use of the VESUVIO spectrometer at ISIS.

Measurement of momentum distribution of lightatoms and molecules in condensed matter systems using inelastic neutron scattering

All authors

C. Andreani, D. Colognesi, J. Mayers, G. F. Reiter &; R. Senesi

https://doi.org/10.1080/00018730500403136

Published online:

19 February 2007

Table     

Quantitative depth profiling of an alternating Pt/Co multilayer and a Pt-Co alloy multilayer by SIMS using a Buckminsterfullerene (C60) source

A Buckminsterfullerene ion beam has been applied to the depth profiling of an alternating pure Pt and pure Co multilayer. Quantitative depth profiling was performed by secondary ion mass spectrometry (SIMS) with C₆₀ ions using Pt-Co alloy films with different compositions. Relative sensitivity factors (RSFs) derived from a Pt₃₉Co₆₁ alloy film were used to convert an original depth profile to a composition depth profile. A severe interface artifact observed in the depth profile of a Pt/Co multilayer was quantitatively correlated with a gradual variation of matrix composition through the Pt/Co and Co/Pt interfaces by comparison with the depth profiling of an alloy multilayer film. Moreover, the interface artifact could be compensated by conversion of the profile to a composition profile using the same RSFs. The depth resolutions of a Pt/Co multilayer derived from the composition depth profile were much larger than the apparent interface widths measured from the original depth profile due to the nonlinear relationship between the Co and Pt ion intensities and their compositions.     

Analysis of refractometric fiber optic state-of-charge (SOC) monitoring sensor for lead acid battery

In situ monitoring of the state of charge (SOC) of lead acid battery is important to understand the residual electrical energy. Usage of battery reduces the charge content of the active electrolyte which in turn changes its refractive index. This paper reports refractometric fiber optic sensor developed for on-line monitoring of SOC. The SOC is monitored during discharging phases of the battery using the developed fiber optic sensor probe along with terminal voltage, temperature and depth of discharge using a LABVIEW based data acquisition system. The paper gives the working principle, design and construction details, results and calibration of the fiber optic sensor (FOS) probe. The in situ monitoring capability of the developed FOS is demonstrated in comparison with the contemporary off-line methods of specific gravity and terminal voltage measurements.