黔产市售鱼腥草中重金属含量分析及膳食风险评估

为研究黔产市售鱼腥草中铅、镉、铬、砷4种重金属的含量水平及其膳食健康风险水平。以贵州贵阳(GY)、遵义(ZY)、铜仁(TR)、安顺(AS)、毕节(BJ)、六盘水(LPS)、黔东南(QDN)、黔西南(QXN)、黔南(QN)等9个市(州)市售鱼腥草为研究对象,利用微波消解处理样品,采用电感耦合等离子体质谱(ICP-MS)法同时测定样品中的4种重金属含量,利用单因子污染指数法、内梅罗综合污染指数法对重金属的污染程度进行评价,利用目标危害系数法进行膳食风险评估。结果显示,鱼腥草中Pb含量为0.084～0.12 mg/kg, Cd含量为0.041～0.068 mg/kg, Cr含量为0.076～0.43 mg/kg, As含量为0.074～0.14 mg/kg。TR、QDN、ZY市售鱼腥草Pb的单项污染指数均大于1,9个市(州)市售鱼腥草Cd、Cr、As的单项污染指数均小于1。不同市(州)市售鱼腥草的内梅罗综合污染指数大小次序为1>TR>QDN>ZY>AS>GY>BJ>QXN>0.7≥QN>LPS。单一重金属的膳食健康风险指数(THQ)总体上...     

广州市与台州市3岁儿童全血部分常量元素与微量元素含量比较分析

为比较不同地区,不同性别3岁儿童全血微量元素及钙、镁的含量,采用原子吸收分光光谱法对广州市及台州市的3岁儿童末梢血中的铜、锌、铁、镁、钙的含量进行测定,比较两个地区及同一地区不同性别的五元素水平.结果表明,广州市与台州市3岁儿童末梢血中的铜、锌、铁、镁、钙的含量有统计学差异,台州市不同性别五元素的含量均没有统计学差异,...     

Phytochemical composition,in vitro antioxidant activity and antibacterial mechanisms of Neolamarckia cadamba fruits extracts

Aqueous extracts of Neolamarckia cadamba fruits prepared at different maturity stages were used for the analysis of various phytochemicals, and their antioxidant and antibacterial activities were determined. Ripe fruit extract had highest phenolics (3.14 mM GAE/ g fruit extract) with caffeic acid, tannic acid, syringic acid and quercetin as major phenolic compounds. The ripe fruit extract showed lowest IC₅₀ values in DPPH radical scavenging assay (231.33 μg fruit extract/ mL), and highest ABTS radical scavenging activity (111.18 μM TEAC/g). Immature fruit extract showed lowest minimum inhibitory concentration against tested bacteria, and the antibacterial activity was probably due to membrane permeation, as was evident by leakage of genetic material and reduction in propidium iodide uptake by bacterium; and by inhibition of sugar and amino acid uptake. The appreciable amount of phenolic compounds and biological activities in the aqueous extracts of N. cadamba fruits suggests it's potential application as natural preservative.     

Evaluation of radon concentration and heavy metals in drinking water and their health implications to the population of Quetta,Balochistan, Pakistan

ABSTRACT

The purpose of this study is to estimate the concentrations of radon and heavy metals in drinking water and assess their health implications to the population of Quetta, Pakistan. The concentration of radon and heavy metals was measured in drinking water collected from tube wells of different depths of the Quetta, Balochistan, Pakistan, using RAD7 detector and Atomic Absorption Spectrometer, respectively. The results show that the concentration of radon ranged from 3.56 ± 0.98 to 8.56 ± 1.32Bq/L with an average of 5.67 ± 1.34Bq/L. The average value of contribution of radon in water to indoor air was found 2.02 ± 0.47mBq/L. In addition to concentration of radon in drinking water, physiochemical parameters like pH and electrical conductivity (EC), and annual effective doses for different age groups were also estimated. Positive correlation of (R² = 0.8471) was observed between depth of well and concentration of radon, however no such relations were found among pH and EC with concentration of radon. Average values of annual effective doses due to intake of radon for age groups 0–1 years (infants), 2–16 years (Children) and ≥17 years (adults) were found (3.00 ± 0.71)×10^?2, (1.1 ± 0.26)×10^?2 and (1.45 ± 0.34)×10^?2 mSv/y, respectively. Average values of heavy metals concentrations were found 1.85 ± 0.64, 3.21 ± 0.75, 5.06 ± 1.19, and 2.47 ± 0.77 and 5.58 ± 1.23 µg/L for As, Cr, Ni, Cd and Pb, respectively. The values of radon concentration and heavy metals in drinking water were found below the USEPA permissible limits, Thus we conclude that, the investigated waters are safe.     

Exposure assessment of heavy metals in water and sediments from a Western Mediterranean basin (Rio Guadalhorce,Region of Andalusia,Southern Spain)

Concentrations of heavy metals (Cd, Cr, Cu, Ni and Pb) were measured in sediment and water from a representative Western Mediterranean basin in South Spain: Guadalhorce River. In the later twentieth century, cities such as Málaga (capital of the Costa del Sol), have suffered the impact of the mass summer tourism. The ancient industrial activities, abandoned mine sites and the actual urbanisation and coastal development, recreation and tourism, wastewater treatment facilities, have been sources of pollution. This river has been heavily modified, with three dams for volume regulation purposes owing to the climatic cycles, with some years very dry and others with torrential rains. In this study, different indices to assessment of sediment contamination, statistical tools (Kruskall–Wallis test, Conglomerate analysis), sequential extraction methods and environmental quality guidelines have been employed to assess the possible contamination of this basin. Other physical–chemical parameters as chloride concentration, pH and conductivity were also measured. The results indicated that Ni and Cu were the most troublesome metals because they were more easily mobilisable than Cr and Pb; Ni exceeds the SQGs guidelines, and Cu presents considerable contamination. These metals were derived from lithogenic and anthropogenic sources, respectively, according to the enrichment factors (EF) values. Ni was the most dangerous because Ni concentrations exceeded the threshold effect concentration (TEC) below which harmful effects are unlikely to be observed, in 96.6% of the samples analysed and even the probable effect concentration (PEC) above which harmful effects are likely to be observed, in 56.6%. The cause of this pollution was postulated to be by abandoned Ni mines, which indicates that the pollution from mining persists during several decades. Multivariate analyses used in this study provide important tools for better understanding of the pollution source identification.     

Development of fast thermal programs in electrothermal atomic absorption spectrometry using hot injection and removal of the ashing stage for determination of heavy metals in sequential extracts from sediments

In this work, a fast thermal methodology is developed for the determination of leachable Cu, Cr, Ni and Pb in sediments by electrothermal atomic absorption spectrometry. Fast thermal programs were tried using hot injection, removal of the ashing stage and matrix modifier and their performance compared with that obtained under conventional thermal programs. For this purpose, the BCR three-stage sequential extraction scheme was applied for partitioning of Pb, Cu, Ni and Cr. CRM BCR 601 lake sediment, which is provided with certified values for the extractable contents of the above metals according this scheme, was used for validation.A shortening of the measurement time by a factor of 3-4 was attained without losing analytical performance. Additionally, other features for speeding up determinations such as calibration are considered. Thus, specifically designed fast thermal programs allowed calibration with matrix-matched standards with extractants to be performed for most metals and fractions instead of standard additions. Background signals, LODs, repeatability and sensitivity were generally similar with both types of programs, hence yielding a comparable analytical performance.     

Microbiological analysis of seawater and sediments in urban shorelines: Occurrence of heavy metals resistance bacteria on Chennai beaches, Bay of Bengal

The present study aims to evaluate the microbial diversity of bacteria, fungi and other pathogenic microorganisms present in seawater and sediments from Chennai shoreline (southeast coast of India).Chennai beaches are heavily polluted with untreated sewage effluents; municipal sewage disposal and recreational activities. Seawater was heavily contaminated with coliforms, Vibrio and Pseudomonas compare to sediment microbial contamination. Isolated bacteria are mostly pathogenic microorganisms including Vibrio, Pseudomonas, Coliforms, Salmonella and Shigella. Another potential environmental threat noticed was heavy metal resistance of these pathogenic strains against 50 mM of Ni, Cr, Cu, Co, Pb and Hg. Statistical analyses revealed that the Chennai coast may cause health risk to the recreational users and fisher folk, ultimately warrants environmental quality management to control microbial contamination     

Elemental fractionation of Si, Al, Ti, Fe, Ca, Mn, P, and Ba in five marine sedimentary reference materials: results from sequential extractions

We report on the elemental results from sequential extractions of BCSS-1 (marine sediment), MESS-1 (estuarine sediment), MAG-1 (marine mud), SCo-1 (Cody shale), and NIST-1c (argillaceous limestone) to encourage future comparisons of sequential extraction results within the marine geochemical and paleoceanographic communities. We measured Si, Al, Ti, Fe, Mn, Ca, P, and Ba in sequential de-ionized water (loosely-bound), MgCl₂ (exchangeable), acetic acid (carbonate), hydroxylammonium hydrochloride (oxide), H₂O₂ (organic), Na₂CO₃ (opal), and residual (lithogenic) leaches. The protocol and selected elements were tailored to be most relevant to paleoceanographic geochemical studies instead of to environmental studies. Our results show that the sequential extraction procedure faithfully yields elemental distributions that are consistent with individual SRM lithologies. Our results also show that the procedure is typically reproducible within approximately 15%. However, in almost all cases, the procedure suffers from a systematic under-recovery of material when compared with the certified, bulk chemical analysis, and the under-recovery appears to be related to the lithology of the SRM. Similar under-recovery appears to be typical of sequential extraction procedures as reported by other previous studies. While this is problematic in assessing closure, it does not diminish the potential of inter-lab comparisons and first-order accuracy comparisons. We found that the elemental totals for the sequential extractions of MAG-1 compared best with the certified, bulk totals, and we recommend using this SRM to facilitate future accuracy assessments and inter-lab comparisons.     

Levels, risk assessment and sources of PM10 fraction heavy metals in four types dust from a coal-based city

The concentrations of V, Cr, Mn, Co, Ni, Cu, Zn, As, Cd, Hg and Pb in PM₁₀ fraction of four types of dust in a coal-based city, Fushun were detected by inductively coupled plasma-atomic emission spectroscopy. Results showed that most of the average concentrations for 11 metals in dust were higher than Chinese soil background values, especially for Cu, Zn, Hg, Cd and Pb with higher pollution index values. The re-suspended dust from residential and school building surfaces showed middle and high level of pollution by geoaccumulation index assessment which should raise attention as their potential health risk to local residenter and students. Six hotspots were found from spatial distribution analysis, locating at the northeast corner, central area close to mines, southwest area adjacent to an expressway, northeast area close to power plants, the city center and the industrial district reflecting the influence of agricultural activities, mining activities, vehicle emission, coal combustion and industrial activities. Correlation and principal component analysis showed accordant results indicating that vehicle emission, industrial activities, coal combustion and crustal materials were the main sources for heavy metals in PM₁₀ fraction of fugitive dust in Fushun.