复合相变储能材料的制备及应用研究进展

系统概述了复合相变储能材料的制备方法及其研究进展。特别介绍了固-液复合相变储能材料的制备方法,如熔融浸渍混合法、溶胶-凝胶法、静电纺丝法、真空渗入法和超声波法等。并结合实例探讨了复合相变储能材料在太阳能利用、建筑节能和纺织行业等领域的应用,在此基础上对其研究方向进行了展望。     

Effects of Total Thermal Balance on the Thermal Energy Absorbed or Released by a High-Temperature Phase Change Material

Front tracking and enthalpy methods used to study phase change processes are based on a local thermal energy balance at the liquid–solid interface where mass accommodation methods are also used to account for the density change during the phase transition. Recently, it has been shown that a local thermal balance at the interface does not reproduce the thermodynamic equilibrium in adiabatic systems. Total thermal balance through the entire liquid–solid system can predict the correct thermodynamic equilibrium values of melted (solidified) mass, system size, and interface position. In this work, total thermal balance is applied to systems with isothermal–adiabatic boundary conditions to estimate the sensible and latent heat stored (released) by KNO3 and KNO3/NaNO3 salts which are used as high-temperature phase change materials. Relative percent differences between the solutions obtained with a local thermal balance at the interface and a total thermal balance for the thermal energy absorbed or released by high-temperature phase change materials are obtained. According to the total thermal balance proposed, a correction to the liquid–solid interface dynamics is introduced, which accounts for an extra amount of energy absorbed or released during the phase transition. It is shown that melting or solidification rates are modified by using a total thermal balance through the entire system. Finally, the numerical and semi-analytical methods illustrate that volume changes and the fraction of melted (solidified) solid (liquid) estimated through a local thermal balance at the interface are not invariant in adiabatic systems. The invariance of numerical and semi-analytical solutions in adiabatic systems is significantly improved through the proposed model.     

正十六烷聚脲微胶囊化相变材料

用界面聚合法，合成了直径大约2.5 μm可用于热能储存含相变材料的聚脲包覆微胶囊.在含乳化剂的水溶液中，将溶有芯材正十六烷的有机相乳化成微米级油性液滴，随后加入的水溶性单体二胺与甲苯2,4-二异氰酸酯在胶束界面相互反应形成囊壁.分别用乙烯二胺，1,6-己二胺和它们的混合物作为水溶性单体进行了研究.并用红外光谱和热分析分别考察了不同胺类对微胶囊化学结构和热性质的影响.红外谱图显示合成了聚脲微胶囊，热重曲线表明含正十六烷的聚脲微胶囊能够耐受大约300 ℃高温，差示扫描量热测试表明所有样品均具有合适的相转变热，冷热循环实验揭示微胶囊能够维持储热容量不衰减.研究表明微胶囊化的正十六烷作为相变储热材料具有良好的应用前景.     

相变储能材料的研究进展

综述了相变材料的研究进展状况 ,介绍了相变材料的分类以及各类相变材料的性能、储能机理和优缺点 ,并介绍了一些新型的相变材料 ,指出了该领域中有待解决的问题 ,展望了未来相变材料的发展前景。     

石蜡/膨胀石墨/石墨烯复合相变储热材料的制备及性能

以石蜡(PA)作为相变储热材料、 膨胀石墨(EG)作为主导热材料和支撑材料, 石墨烯气凝胶(GA)作为导热增强材料和辅支撑材料制备了PA/EG/GA复合相变材料, 研究了GA添加量对复合相变材料相变温度、 相变潜热、 导热性能以及循环稳定性的影响. 结果表明, 所制备的80%PA-17%EG-3%GA复合相变材料导热性能良好, 循环稳定性出色. 与80%PA-20%EG复合材料相比, 该材料的相变温度、 相变潜热以及循环稳定性无明显变化, 但导热系数由4.089 W/(m·K)提升到了5.336 W/(m·K), 显示出良好的应用前景.     

The Thermal Charging Performance of Finned Conical Thermal Storage System Filled with Nano-Enhanced Phase Change Material

A latent heat thermal energy storage (LHTES) unit can store a notable amount of heat in a compact volume. However, the charging time could be tediously long due to weak heat transfer. Thus, an improvement of heat transfer and a reduction in charging time is an essential task. The present research aims to improve the thermal charging of a conical shell-tube LHTES unit by optimizing the shell-shape and fin-inclination angle in the presence of nanoadditives. The governing equations for the natural convection heat transfer and phase change heat transfer are written as partial differential equations. The finite element method is applied to solve the equations numerically. The Taguchi optimization approach is then invoked to optimize the fin-inclination angle, shell aspect ratio, and the type and volume fraction of nanoparticles. The results showed that the shell-aspect ratio and fin inclination angle are the most important design parameters influencing the charging time. The charging time could be changed by 40% by variation of design parameters. Interestingly a conical shell with a small radius at the bottom and a large radius at the top (small aspect ratio) is the best shell design. However, a too-small aspect ratio could entrap the liquid-PCM between fins and increase the charging time. An optimum volume fraction of 4% is found for nanoparticle concentration.     

煤基碳泡沫/聚氨酯相变复合材料的制备及储热性能

以煤基碳泡沫(CCF)作为骨架材料来封装改性固-固相变材料聚氨酯(PU),并实现其功能化应用。使用场发射扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线粉末衍射仪(PXRD)、傅里叶变换红外(FT-IR)光谱仪、热重分析仪(TGA)、差示扫描量热(DSC)分析仪、热导测试仪对所得到的复合材料(PU@CCF)进行结构和特性表征。结果显示,聚乙二醇(PEG-6000)与异氰酸酯(HDI)反应制备聚氨酯的最优摩尔比例为1:2,煤基碳泡沫可以很好地阻止聚氨酯从复合材料中泄露出来。相较于聚乙二醇,复合材料的导热率上升了54%,经过200次热循环,复合材料保持了良好的稳定性,而且其相变主体材料PU的过冷度降低了10℃以上。基于碳泡沫骨架良好的导电性,加载高于0.8V的低电压就可实现聚氨酯电热相变储能,在1.1V电压驱动下,其电热转换效率可达75%。该工作是目前报道的最低电压下可实现电热相变转换的复合功能材料,为实现低成本相变复合材料的制备与功能化提供重要参考。     

一种致密的相变储能微胶囊的制备与表征

制备了以聚脲为第一壁材、苯乙烯-二乙烯苯为第二壁材,以相变点在16℃左右的石蜡为芯材的相变储能微胶囊。采用红外光谱、差示扫描量热分析、热重分析测试技术表征了制备的相变储能微胶囊的结构组成以及热性能;采用溶剂淋洗法研究了影响包覆率的因素。结果表明,相变储热微胶囊是复合相变材料,微胶囊的热稳定性好,致密性优良;通过对水油比、乳化剂及苯乙烯-二乙烯苯用量等各因素对微胶囊包覆率影响的讨论,得出在水与油质量比3.2,乳化剂相对于水的质量分数为2%时,加入苯乙烯与二乙烯苯质量比为10∶1混合液的质量分数为6.0%时,其包覆率达81.14%;制备的微胶囊能耐较高温度,在150℃以下无质量损失,且微胶囊储热能力高达80J/g。同时发现,储热能力与芯壁比有关,比值越大储热潜能越高。     

交联型聚氨酯固-固相变材料的相变性能及形态

聚氨酯;聚乙二醇;储能材料;固 固相变材料;相变行为     

六羟基化合物为骨架的高分子固-固相变材料的合成与性能

分别使用三种含6个羟基的化合物(山梨醇、双季戊四醇和肌醇)作为分子骨架,聚乙二醇(PEG)作为相变功能链,4,4'-二苯基甲烷二异氰酸酯(MDI)为交联剂,合成了3种具有不同交联结构的新型固-固相变储能材料。通过傅里叶变换红外光谱(FT IR)、X-射线衍射(XRD)、偏光显微镜(POM)、示差扫描量热法(DSC)和热重量分析法(TG)分别对合成材料的分子结构、结晶性能、相变行为和热稳定性进行了研究。结果显示,所制备的材料在30~70℃温度范围内具有典型的固-固相变特性,其升温和冷却过程的相变焓最高可达107.5J/g和102.9J/g。此外,通过热重分析发现所合成材料具有较好的可重复使用性和热稳定性。因此,合成的新型固-固相变材料在热能储存和控温领域具有巨大的应用潜力。     

Improvement of Phase Change Materials (PCM) Used for Solar Process Heat Applications

The high intermittency of solar energy is still a challenge yet to be overcome. The use of thermal storage has proven to be a good option, with phase change materials (PCM) as very promising candidates. Nevertheless, PCM compounds have typically poor thermal conductivity, reducing their attractiveness for commercial uses. This paper demonstrates the viability of increasing the PCM effective thermal conductivity to industrial required values (around 4 W/m·K) by using metal wool infiltrated into the resin under vacuum conditions. To achieve this result, the authors used an inert resin, decoupling the specific PCM material selection from the enhancement effect of the metal wools. To ensure proper behavior of the metal wool under standard industrial environments at a broad range of temperatures, a set of analyses were performed at high temperatures and an inert atmosphere, presenting a thorough analysis of the obtained results.     

Characterization of Unripe and Mature Avocado Seed Oil in Different Proportions as Phase Change Materials and Simulation of Their Cooling Storage

Environmental problems have been associated with energy consumption and waste management. A solution is the development of renewable materials such as organic phase change materials. Characterization of new materials allows knowing their applications and simulations provide an idea of how they can developed. Consequently, this research is focused on the thermal and chemical characterization of five different avocado seed oils depending on the maturity stage of the seed: 100% unripe, 25% mature-75% unripe, 50% mature-50% unripe, 75% mature-25% unripe, and 100% mature. The characterization was performed by differential scanning calorimetry, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The best oil for natural environments corresponded to 100% matured seed with an enthalpy of fusion of 52.93 J·g−1, and a degradation temperature between 241–545 °C. In addition, the FTIR analysis shows that unripe seed oil seems to contain more lipids than a mature one. Furthermore, a simulation with an isothermal box was conducted with the characterized oil with an initial temperature of −14 °C for the isothermal box, −27 °C for the PCM box, and an ambient temperature of 25 °C. The results show that without the PCM the temperature can reach −8 °C and with it is −12 °C after 7 h, proving its application as a cold thermal energy system.     

A Novel Solid-Solid Phase Change Material Based on Poly(styrene-co-acrylonitrile) Grafting With Palmitic Acid Copolymers

(SAN-g-PA) as new solid-solid phase change materials (SSPCMs) were synthesized starting from poly(styrene-co- acrylonitrile) (SAN) and palmitic acid (PA). The chemical structure of the synthesized SAN-g-PA were characterized with Fourier transform infrared (FTIR), and Nuclear Magnetic Resonance (¹H-NMR), their thermal energy storage properties and thermal stability were investigated with differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. Moreover, the crystalline morphology and crystal structures were also measured with polarized optical microscopy (POM) and X-Ray Diffraction (XRD). The result shows that the PA molecule was grafted onto the SAN, SAN-g-PA were obtained successfully. The crystalline morphology and crystal structures of the synthesized SAN-g-PA are different from palmitic acid and SAN. As novel SSPCMs, SAN-g-PA possess suitable phase transition temperature, the higher enthalpy value, and good heat stability.     

铜粒子负载泡沫基相变复合材料的制备与性能

以三聚氰胺泡沫(MF)经高温碳化后制得的碳泡沫(CF)为基体, 以氯化铜(CuCl₂)和水合肼(N₂H₄·H₂O)溶液为前驱体, 利用氧化还原反应在泡沫骨架上生成铜粒子, 然后通过真空浸渍法将聚乙二醇(PEG)封装在基体中制得相变复合材料. 利用扫描电子显微镜(SEM)、 X射线衍射仪(XRD)、 差示扫描量热仪(DSC)和红外热成像仪等研究了相变复合材料的形貌、 结构和热性能. 结果表明, 当CuCl₂浓度为1.0 mol/L时, Cu粒子均匀致密地沉积在CF骨架表面, 制得的相变复合材料在具备良好密封性能的前提下, 相变潜热可高达145.2 J/g, 热效率超过80%, 光热转换效率达到83.8%, 且呈现出优异的储热能力和调温性能. 本文为制备综合性能优异的相变复合材料提供了一种策略, 有利于拓宽相变复合材料的应用领域.     

基于快速热释放功能的相变偶氮苯/织物复合材料

针对偶氮基光敏分子存在放热速率慢和温度难以控制的难点,在分子结构设计基础上,采用氧化偶合法制备了具有固-液相变功能的4,4′-对-二正己基偶氮苯(AZO-L6).由于分子间作用力较低,偶氮苯分子呈现低熔、快异构化的特点,在发生反-顺异构化转变时大幅降低分子的熔点.固-液相变过程实现了光热能和相变焓的存储,在结构回复时同时放出储存的能量(231.8 kJ/kg),并将相变偶氮苯应用于可穿戴聚合物复合织物中.结果显示储能后的相变偶氮苯分子在蓝光(440 nm)刺激下在60 s内可将材料温度提升0.8℃,获得了具有自加热功能的可穿戴复合织物,为探索多功能自保温可穿戴装置提供了研究思路.     

有机/无机复合微胶囊相变材料的近红外光谱分析

通过傅里叶变换近红外(FT-NIR)光谱分析技术, 探索聚甲基丙烯酸甲酯-二氧化硅@相变材料(PMMA-SiO₂@PCM)微胶囊相变过程的光谱学特性和相变机理, 分析相变过程微胶囊的微结构变化特性. 结果显示: 微胶囊中, 石蜡的融化过程就是－CH₂对称伸缩振动逐渐增强和非对称伸缩无规则振动共存的振动变化过程. 石蜡相变过程中, 其近红外吸收峰强度的变化仅是壳层材料吸收峰强度变化幅度的一半. 同时, 近红外光谱可以用来辅助分析微胶囊的核壳结构, 实现微胶囊相变过程监测. 近红外光谱在微胶囊相变材料相变过程的应用对相变机理的研究及高效相变材料的选择具有重要的科学意义和应用价值.     

Form-stable electrospun nanofibrous mats as a potential phase change material

A series of Poly vinyl butyral–Poly (acrylic acid) (PVB-PAA) based form-stable phase change materials (PCMs) have been prepared for the use of thermal energy storage applications. Six types of formulations containing five different fatty alcohols were prepared by adding PVB to PAA. Using electrospinning to fabricate nanofibrous mats, our aim was to investigate their properties as form-stable PCMs. Fatty alcohols, 1-Tetradecanol, 1-Hexadecanol, 1-Octadecanol, 1-Eicosanol and 1-Docosanol, were added separately to base formulation. The structural characterization tests were performed by ATR-FTIR spectroscopy. Morphological tests were conducted using Scanning Electron Microscope (SEM). Thermal performances and phase change behaviors were tested by thermogravimetric analysis system (TGA) and differential scanning calorimetry (DSC). The heating cycle phase change enthalpy is measured between 223 and 241?J/g, and the freezing cycle phase change enthalpy is found between 215 and 239?J/g. The main decomposition PVB-PAA based PCMs started at 220?°C. This study suggested that PVB-PAA based PCMs possess well phase change properties and they were found to have an applicable temperature range. With the presented results these materials promise a great potential in thermal energy storage applications.     

石蜡/P(MMA-co-AA)核壳结构相变蓄能微胶囊的制备

以熔点在58~60℃的半精炼石蜡作为相变芯材,与单体、分散剂水溶液形成核壳结构分散液,室温下自由基聚合制备甲基丙烯酸甲酯-丙烯酸的共聚物(P(MMA-co-AA))为壳材的微胶囊.分别用相差显微镜、扫描电镜、差示扫描量热分析仪和傅里叶变换红外光谱仪测定了微胶囊的形貌、热性能和壳材化学结构.微胶囊的直径范围为1~5μm,其中相变芯材的含量可达70%左右,具有较高的相变潜热(99 J/g),有望应用于空调、供暖等领域.     

Microencapsulation of n-Eicosane as Energy Storage Material

For heat energy storage application, polynrea microcapsules containing phase change material, n-eicosane, were synthesized by using interfacial polymerization method with toluene-2,4-diisocyanate (TDI) and diethylenetriamine(DETA) as monomers in an emulsion system. Poly(ethylene glycol)octyl-phenyl ether (OP), a nonionic surfactant,was the emulsifier for the system. The experimental result indicates that TDI was reacted with DETA in a mass ratio of 3 to 1. FF-IR spectra confirm the formation of wall material, polyurea, from the two monomers, TDI and DETA.Encapsulation efficiency of n-eicosane is about 75%. Microcapsule of n-eicosane melts at a temperature close to that of n-eicosane, while its stored heat energy varies with core material n-eicosane when wall material fixed.Thermo-gravimetric analysis shows that core material n-eicosane, micro-n-eicosane and wall material polyurea can withstand temperatures up to 130, 170 and 250℃, respectively.     

基于低温热释放的烷基接枝相变偶氮苯材料

通过Mills法合成了两种不同取代基的烷基接枝相变偶氮苯——4-正戊基偶氮苯(Azo5)和2′-甲基-4-正戊基偶氮苯(AzoM5). 通过核磁共振氢谱和傅里叶变换红外光谱表征了Azo5和AzoM5的化学结构, 利用紫外-可见光谱、 示差扫描量热仪和红外热像仪分析了材料的异构化性能、 循环稳定性、 储热和放热性能, 并测试了?10 ℃环境下的热量释放能力. 结果表明, Azo5和AzoM5由于分子间作用力低, 呈现出低熔点、 快速异构化的特点, 并且由于低温下的光致相变行为, 能量密度显著提高, 分别达到216和218 J/g. 红外热成像仪观测结果表明, 在可见光照射下, Azo5在低温环境(?10 ℃)下可以实现6 ℃的温度提升.