纳米薄层HZSM-5分子筛催化甲醇制丙烯

在合成系列硅铝比纳米薄层HZSM-5分子筛的基础上,研究了纳米薄层HZSM-5分子筛催化甲醇制丙烯(MTP)的反应性能.在固定床微反装置上详细考察了工艺条件对纳米薄层HZSM-5分子筛催化性能的影响,同时与纳米HZSM-5分子筛对MTP反应的催化性能进行了比较.结果表明,纳米薄层HZSM-5分子筛具有较高的目的产物选择性和较长的催化寿命.在适宜硅铝比(n(SiO2)/n(Al2O3)=213)和反应条件下(温度470°C,甲醇质量空速为3 h-1),丙烯的选择性达到46.7%,三烯(乙烯、丙烯和C4烯烃)选择性达到78.7%.其中,丙烯/乙烯的质量比可达到6.5,是纳米HZSM-5分子筛的2倍,而芳烃的选择性比纳米分子筛明显降低.这是因为纳米薄层HZSM-5分子筛比纳米HZSM-5分子筛具有较宽的(010)晶面、较大的外比表面积和介孔孔容.     

浆态床合成二甲醚复合催化剂失活原因探索

在反应温度260℃、压力5.0MPa的条件下,对浆态床反应器中二甲醚合成复合催化剂的失活规律进行了研究。结果表明, Cu基催化剂失活较快是导致浆态床二甲醚合成催化剂不稳定的主要原因。通过分析Cu基催化剂在浆态床反应器和固定床反应器中的活性变化规律,发现在浆态床反应器中不能及时导出反应体系的H2O对催化剂的毒副作用导致了浆态床Cu基催化剂快速失活。对失活催化剂进行的TPR、XRD和SEM EDS表征结果可以看出,Cu粒子的长大和积炭是Cu基催化剂失活的重要原因,与已有文献报道不同的是并未发现明显的Cu元素流失。     

甘油辅助HZSM-5分子筛的制备及其甲烷无氧芳构化催化性能研究

以正硅酸乙酯(TEOS)为硅源,甘油为辅助剂,在水热条件下合成HZSM-5分子筛。考察甘油添加量、晶化时间对HZSM-5分子筛的晶粒尺寸、相对结晶度和酸性等性质及其甲烷无氧芳构化催化性能的影响。利用X射线衍射(XRD)、扫描电镜(SEM)、氨程序升温脱附(NH₃-TPD)等分析手段对不同条件合成的HZSM-5分子筛样品进行表征。结果表明,在添加一定量的甘油辅助剂的条件下,通过调控晶化时间,可以提升HZSM-5分子筛的相对结晶度,在一定程度上抑制无定型SiO₂的产生,增加其酸量。在甲烷无氧芳构化反应中,甘油辅助合成的HZSM-5分子筛催化剂表现出优良的催化性能,与未添加甘油合成的HZSM-5分子筛催化剂相比,甲烷转化率、苯选择性和芳烃选择性均有较大提高,且具有较强的稳定性与容炭能力。     

Effect of Fe-Mo promoters on HZSM-5 zeolite catalyst for 1-hexene aromatization

The promotional effect of Fe-Mo species introduced into HZSM-5 (Zeolyst Int., SiO₂/Al₂O₃ ≈ 30) zeolite catalyst by the wetness impregnation method for the 1-hexene aromatization was investigated. The structure and catalytic performance for the aromatization of 1-hexene over xFeyMo-ZSM-5 catalysts in comparison with unmodified HZSM-5 catalysts were studied. The xFeyMo-ZSM-5 catalysts contain fixed loading (5 wt%) and variable Fe/Mo ratio. The catalysts were characterized by BET, ICP-AES, HRSEM-EDS, HRTEM, XRD, FTIR, H₂-TPR, NH₃-TPD, and pyridine DRIFT spectroscopy. The characterization data confirmed the existence of Fe and Mo species in the zeolite matrix. With Fe and Mo species implementation to HZSM-5 zeolite, the amount of the acid sites decreased, but the selectivities to C₉₊ aromatics increased. The catalyst evaluation was performed at 350 °C for 6 h on-stream at atmospheric pressure using a fixed-bed quartz tube reactor. The selectivity to products of different carbon number was affected by the Fe/Mo ratio within the zeolite. It was found the product distribution of grouped fractions of C₁–C₁₇₊ from the liquid product. The results indicate that the optimum ratio of Fe/Mo is 1–1.5. The highest selectivity for gasoline and distillate ranges was obtained for the 2.5wt%Fe2.5wt%Mo- and 3wt%Fe2wt%Mo-ZSM-5 samples, which was higher than that for parent HZSM-5 catalyst.     

甲醇催化转化制丙烯中HZSM-5分子筛的尺寸效应

甲醇催化制丙烯(MTP)是一个具有重要工业应用的研究课题, 目前普遍采用的催化剂是HZSM-5 分子筛. 通过调节分子筛合成原料的配比、晶化温度和晶化时间等参数, 对所制备的不同晶粒尺寸的HZSM-5 分子筛, 综合利用X射线衍射(XRD)、扫描电镜(SEM)、N₂吸附和氨气程序升温脱附(NH₃-TPD)等手段表征了其晶格结构、表观形貌、孔结构以及酸性质. 利用固定床反应装置对HZSM-5 分子筛甲醇催化制丙烯的活性和稳定性进行了评价, 并采用热重(TG)分析技术对催化剂的积炭性能进行了考察. 实验结果表明, HZSM-5 分子筛粒度的减小可以增加分子筛比表面积、孔体积, 同时有更多开放的孔口及短的孔道长度, 有利于反应物分子的吸附和传质,并降低了产物分子在孔道中的扩散距离及发生二次反应的几率, 提高了催化剂的抗积炭能力和容炭能力以及稳定性; 而且所合成的小尺寸分子筛单位质量的总酸量及强酸量均有不同程度的下降, 有利于提高目标产物丙烯的选择性.     

四丙基氢氧化铵改性纳米HZSM-5分子筛及其在甲醇制汽油中的催化性能

采用四丙基氢氧化铵(TPAOH)溶液对纳米ZSM-5分子筛进行改性, 运用X射线衍射、扫描电镜、²⁷Al和²⁹Si固体核磁、X射线光电子能谱、N₂物理吸附脱附法和NH₃程序升温脱附等手段对所制样品进行了表征, 并评价了其催化甲醇制汽油反应性能. 结果表明, 改性后的HZSM-5相对结晶度增加, 晶体形貌更加规整, 表面硅铝比增加, 比表面积和微孔表面积增大, 强酸位酸量增多. 同时, TPAOH改性不仅可以使分子筛脱硅脱铝, 而且伴有二次晶化补硅补铝, 改变了分子筛的硅铝分布. 改性的HZSM-5在甲醇制汽油反应中的稳定性大幅度提高, 其寿命由70h增至170h以上, 随着TPAOH处理时间的增加, 催化剂寿命增加, 氢转移反应加快, 导致油相产品中异构烷烃增多, 烯烃减少.     

Zn/H-ZSM-5催化剂上的二甲醚芳构化反应

 考察了 H-ZSM-5 和 Zn/H-ZSM-5 催化剂的二甲醚芳构化性能. 结果表明, H-ZSM-5 分子筛催化剂酸性的增强和酸中心的增多有利于二甲醚芳构化. 当在 H-ZSM-5 催化剂中加入 2% Zn 时, 在 360 oC 下反应时总芳烃收率从 50.0% 增加至 66.2%, C8 芳烃收率从 28.6% 增加到 39.0%. 反应温度升高到 480 oC 时, 总芳烃收率增加至 78.0%.     

氧化钙改性分子筛对一步法合成二甲醚的影响(英）

采用浸渍法制备了一系列CaO改性的HZSM 5 (Si/Al=38)分子筛,并以CaO/HZSM 5为脱水剂 与JC207甲醇合成催化剂(靖江催化剂厂)按照一定的比例组成双功能催化剂,在固定床反应器上考察了其对一步法合成二甲醚的影响。XRD结果表明,CaO在HZSM 5上呈高度分散状态,没有发现新的物种生成。Pyridine IR结果表明,CaO引入HZSM 5后,酸中心的类型和数量发生明显的变化,CaO的加人促使部分酸中心由B酸中心转变为L酸中心。NH3 TPD结果表明,随着CaO含量的增加,HZSM 5分子筛表面酸性较强的酸中心数目下降,总酸中心数目也下降,但酸性较强的酸中心下降较快。表明适量的CaO改性HZSM 5分子筛不是除去表面所有的酸中心,而是通过与表面强酸中心的作用,使其向弱酸和中强酸中心过渡,从而改变HZSM 5表面的酸强度分布,提高二甲醚的选择性。     

HZSM-5型分子筛硅铝比对一步法合成二甲醚的影响

以Cu/Zn/Al(摩尔比为6∶3∶1)甲醇合成催化剂与HZSM-5型分子筛混合,制备了一步法二甲醚合成催化剂。通过改用三种不同Si/Al摩尔比（摩尔比为25、38和50）的HZSM-5型分子筛,考察了催化剂中脱水组分（HZSM-5分子筛）的酸性对二甲醚合成的影响。结果表明,随着催化剂Si/Al摩尔比的降低,分子筛的酸性增强,使得CO单程转化率提高。当催化剂Si/Al＝38时,CO对二甲醚的选择性最高,可达到68.13％,其次是催化剂Si/Al＝50,选择性最差的是Si/Al＝25的催化剂。在553 K、 3 MPa和4 000 h－1的条件下,Si/Al＝25和Si/Al＝38的催化剂CO单程转化率和DME的选择性接近一致。在此条件下,两者的时空产率达到试验的最大值,分别为0.38 gDME/(gcat·h)和0.36 gDME/(gcat·h),在试验范围内,一步法合成二甲醚催化剂最佳的Si/Al摩尔比为25。     

La／HZSM—5催化剂上丙烷的芳构化反应研究

采用浸渍法和离子交换法制备了La/HZSM-5分子筛催化剂,用于丙烷芳构化反应,利用XRD,SPS,FT－IR,NH3－TPD技术考察了La对HZSM－5分子筛结构和表面酸性的影响,引入La后能显著提高HZSM－5的丙烷芳构化活性,其中由离子交换法得到的催化剂效果最佳,在反应温度550度,空速600h^-1条件下,丙烷转化率和芳烃选择性分别达到94．58％,68．99％,在La/HZSM-5中分子筛结晶度下降,B酸中心减少,L酸中心增多,离子交换法制备的催化剂比浸渍法催化剂的这种变化更显著,同时更有利于La3 进入分子筛孔道内,并与分子筛产生强相互作用,新增加的L酸中心可能是芳构化反应的活性中心。     

含氟体系中高性能T型分子筛膜的合成

含氟体系中,在负载晶种的大孔莫来石支撑体表面快速合成了高性能且取向生长的T型分子筛膜。采用XRD、SEM和MAS NMR等手段对分子筛膜层和粉末进行表征。讨论了添加物、氟硅比、合成温度和合成时间等条件对膜生长与分离性能的影响,并阐述了含氟体系中T型分子筛膜快速晶化的机理。碱金属氟盐的加入促进了T型分子筛晶体层的晶化速率,并对晶体层形貌产生了一定的影响。膜应用于75℃、水/异丙醇(10∶90,w/w)体系的平均渗透通量和分离因子分别为(4.91±0.18)kg·m-2·h-1和7 060±1 130。     

含氟体系中高性能T型分子筛膜的合成

含氟体系中,在负载晶种的大孔莫来石支撑体表面快速合成了高性能且取向生长的T型分子筛膜。采用XRD、SEM和MASNMR等手段对分子筛膜层和粉末进行表征。讨论了添加物、氟硅比、合成温度和合成时间等条件对膜生长与分离性能的影响,并阐述了含氟体系中T型分子筛膜快速晶化的机理。碱金属氟盐的加入促进了T型分子筛晶体层的晶化速率,并对晶体层形貌产生了一定的影响。膜应用于75℃、水/异丙醇（10：90,w/w）体系的平均渗透通量和分离因子分别为（4.91±0.18）kg·m^-2·h^-1和7060±1130。     

Optimization of hydrothermal synthesis of H-ZSM-5 zeolite for dehydration of methanol to dimethyl ether using full factorial design

H-ZSM-5 zeolite was synthesized by hydrothermal method.The effects of different synthesis parameters,such as hydrothermal crystallization temperature(170-190 C) and Si/Al molar ratio(100-150),on the catalytic performance of the dehydration of methanol to dimethyl ether(DME) over the synthesized H-ZSM-5 zeolite were studied.The catalysts were characterized by N 2 adsorption-desorption,XRD,NH 3-TPD,TGA/DTA,and SEM techniques.The full factorial design of experiments was applied to the synthesis of H-ZSM-5 zeolite and the effects of synthesis conditions and their interaction on the yield of DME as the response variable were determined.Analysis of variance showed that two variables and their interaction significantly affected the response.According to the experimental results,the optimized catalyst prepared at 170 C with the Si/Al molar ratio of 100 showed the best catalytic performance among the tested H-ZSM-5 zeolite.     

Propane Aromatization over Mo/HZSM-5 Catalysts

Impregnation, mechanical mixing and hydrothermal treatment methods were used to introduce molybdenum species into the HZSM-5 zeolite. The structure and surface acidity of the catalysts were studied by means of XRD, FT-IR, NH3-TPD, TPR and XPS. The effects of Mo content and reaction time on stream on the aromatization of propane were investigated. It was found that the performance of the Mo/HZSM-5 catalyst prepared by the hydrothermal treatment method was much better than that of the other two catalysts. For example, under the reaction conditions of 823 K and 600 h-1, propane conversion and aromatics selectivity over the catalyst prepared by hydrothermal pretreatment could reach 89.17% and 78.56%, respectively. XRD and XPS results showed that the Mo species in the catalysts prepared by hydrothermal treatment were highly dispersed on the surface of the HZSM-5, and larger amounts of them could penetrate into the HZSM-5 channel, as compared with the other two kinds of catalysts. These factors may be responsi     

Shaped binderless ZSM-11 zeolite catalyst prepared via a dry-gel conversion method:Characterization and application for alkylation of benzene with dimethyl ether

Shaped binderless ZSM-11 zeolite catalysts were synthesized via a dry-gel conversion technique from 70ZSM-11/30 SiO_2mix extrudates. 1,6-hexanediamine combined with tetrabutylammonium bromide was proved to be the best structure directing agent for the synthesis of the binderless ZSM-11 catalyst, without adding other alkaline materials. The 70HZSM-11/30 SiO_2mix serials materials crystallized for different times were detected by X-ray diffraction(XRD), nuclear magnetic resonance(NMR), scanning electron microscopy(SEM), transmission electron microscopy(TEM), scanning transmission electron microscopy–energy dispersive spectroscopy(STEM–EDS) techniques, and so on. In order to investigate the possible crystallization mechanism, the textural and structural properties of 70HZSM-11/30 SiO_2mix serials samples were further characterized by N_2 adsorption–desorption. Acid properties were determined by temperature-programed desorption of NH_3(NH_3-TPD) and pyridine adsorption-infrared(Py-IR) measurements. In the alkylation of benzene with dimethyl ether, the serials catalysts exhibited different benzene conversions. 70HZSM-11/30 SiO_2mix showed the lowest benzene conversion while sample 70HZSM-11/30 SiO_2mix-6.5h synthesized only for 6.5h displayed a higher benzene conversion, even higher than the value over 70HZSM-11/30Al_2O_3mix. Extending the crystallization time, the obtained samples displayed the increased benzene conversion in general under the same reaction conditions. In the end, the relation of physicochemical properties with the reaction performance was investigated.     

Catalytic performance of imidazole modified HZSM-5 for methanol to aromatics reaction

A facile approach was developed for the preparation of nano-sized HZSM-5 with a hierarchical mesoporous structure by adding imidazole into conventional zeolite synthesis precursor solution. The physicochemical properties of modified HZSM-5 were characterized by X-ray diffraction(XRD), N_2 adsorption–desorption isotherms, scanning electron microscopy(SEM), NH_3-temperature-programmed desorption(NH_3-TPD) and pyridine adsorption infrared spectroscopy(Py-IR). The coke in spent catalysts was characterized by thermogravimetry(TG). The results showed that hierarchical HZSM-5 zeolites with excellent textural properties, such as abundant porous structure, uniform particle size and suitable acidity, could be synthesized by the recipe of one-pot synthesis routes. Moreover, the obtained HZSM-5 exhibited higher selectivity of total aromatics as well as longer lifetime in the catalytic conversion of methanol to aromatics, comparing with conventional HZSM-5. It is expected that the synthesis approach demonstrated here will be applicable to other zeolites with particular textural properties and controllable particle sizes, facilitating the emergence of new-type porous materials and their related applications in catalysis and separation.     

清液体系中T型分子筛膜的高重复性合成与渗透汽化性能

以自制微米级分子筛为晶种,在清液体系中成功合成出高性能的T型分子筛膜,考察了硅铝比、水硅比、碱度及合成温度与时间等条件对膜的生长和渗透汽化性能的影响.结果表明,在摩尔组成为1SiO₂:0.015Al₂O₃:0.41(Na₂O+K₂O):30H₂O的清液体系中,于423K晶化6h的条件下可较快地形成一层厚度为5μm的连续致密纯相T型分子筛膜,较大缩短了膜合成时间且提高了膜致密性.在优化条件下所合成的膜具有优良的分离性能和高重复性.348K时,在10wt%水-90wt%异丙醇混合物体系中膜的渗透通量和分离因子分别高达4.20kg/(m²·h)和7800.     

氟硅酸铵改性纳米HZSM-5分子筛催化甲醇制丙烯

在静态条件下, 采用不同浓度的氟硅酸铵溶液对纳米ZSM-5分子筛进行了改性处理. 利用粉末X射线衍射(XRD)、²⁷Al 魔角旋转固体核磁共振(²⁷Al MAS NMR)、X射线荧光光谱(XRF)、X射线光电子能谱(XPS)、N₂ 吸附、透射电镜(TEM)、NH₃程序升温脱附(NH₃-TPD)、吡啶吸附红外光谱(Py-IR)等技术对改性前后纳米ZSM-5分子筛的骨架结构、织构性质、酸性质进行了表征. 并在常压、反应温度为450℃、甲醇质量空速(WHSV)为1 h^-1的条件下, 研究了改性前后纳米HZSM- 的甲醇制丙烯(MTP)催化性能. 结果表明, 合适浓度的氟硅酸铵处 理能够选择性地脱除纳米ZSM-5 分子筛的外表面铝, 从而使得HZSM-5 的酸密度降低, 比表面积和孔容增大, MTP催化性能显著提高. 氟硅酸铵改性后纳米HZSM-5 的丙烯选择性和丙烯/乙烯(P/E)质量比分别由原来的 28.8%和2.6提高到45.1%和8.0, 催化剂寿命增加了近2倍.     

Propane Aromatization over Mo／HZSM—5 Catalysts

Impregnation,mechanical mixing and hydrothermal treatment methods were used to introduce molybdenum species into the HZSM-5 zeolite ,the structure and surface acidity of the catalysts were studied by means of XRD,FT-IR ,NH3-TPD,TPR and XPS,The effects of Mo content and reaction time on stream on the aromatization of propane were investigated,It was found that the performance of the Mo/HZSM-5 catalst prepared by the hydrothermal treatment method was much better than that of the other two catalysts,For example ,under the reaction conditions of 823 K and 600h^-1, propance conversion and aromatics selectivity over the catalyst prepared by hydrothermal pretreatment could reach 89.17% and 78.56%,respectively,XRD and XPS results showed that the Mo species in the catalysts prepared by hydrothermal treatment were highly dispersed on the surface of the HZSM-5,and lartger amounts of them could penetrate into the HZSM-5 channel ,as compared with the other two kinds of catalysts,These factors may be responsibled for their high activities for propane aromatization,IR and NH3-TPD studies indicated that the number of Broensted acid centers decreased and the Lewis acid centers increased after Mo was introduced into the HZSM-5 zeolite.     

分子筛硅铝比及晶粒粒径对 Cu-ZnO-Al2O3/HZSM-5催化剂直接合成二甲醚反应性能的影响

采用水热晶化法合成了硅铝比(SiO₂/Al₂O₃)为60、120、200和晶粒粒径分别为1.00和0.25 μm的HZSM-5分子筛,并以其为甲醇脱水活性组分与铜基甲醇合成活性组分(Cu-ZnO-Al₂O₃)组成双功能催化剂(Cu-ZnO-Al₂O₃/HZSM-5),在连续流动加压固定床反应器上考察了Cu-ZnO-Al₂O₃/HZSM-5对合成气直接制二甲醚反应的催化性能。结果表明,随着分子筛硅铝比的提高,二氧化碳副产物的生成量逐渐减少,从而使目的产物二甲醚的选择性逐渐增大。与常规分子筛相比,小晶粒分子筛的反应活性接近,但二氧化碳和烃类副产物的选择性较低。