A new room‐temperature liquid,high‐performance tricyanate ester

A new tricyanate ester monomer of a tris(4‐hydroxyphenyl)benzene derivative was synthesized in 6‐steps with a 63% overall yield. The geminal substitution of phenyl rings on ethane, in addition to the creation of a racemic/diastereomeric mixture, resulted in a liquid monomer whereas compounds with similar structure and symmetry have melting points typically over 100 °C. Key properties of the polycyanurate, such as the glass transition temperature and moisture resistance, were positively influenced by the higher crosslink density provided by the monomer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Novel high‐performance polymer memory devices containing (OMe)2tetraphenyl‐p‐phenylenediamine moieties

The functional polyimide (OMe)₂TPPA‐6FPI ( PI ) and the polyamide (OMe)₂TPPA‐6FPA ( PA ) consisting of electron‐donating N,N′‐bis(4‐aminophenyl)‐N,N′‐di(4‐methoxylphenyl)1,4‐phenylenediamine [(OMe)₂TPPA‐diamine] for memory application were prepared in this study. These polyimide and polyamide memory devices were fabricated with the sandwich configuration of indium tin oxide (ITO)/polymer/Al, and could be switched from the initial low‐conductivity (OFF) state to the high‐conductivity (ON) state with high ON/OFF current ratios of 10⁷ and 10⁹, respectively. PI exhibited dynamic random access memory (DRAM) performance, whereas PA showed static random access memory (SRAM) behavior. To get more insight into the memory behaviors of these two different types of polymer memory devices, molecular simulation on the basic unit was carried out. Furthermore, the differences of highest occupied molecular orbital (HOMO) energy level, lowest unoccupied molecular orbital (LUMO) charge density isosurfaces, dipole moment, and linkage conformation between PI and PA were found to affect the volatile memory behavior. Both polymer memory devices revealed excellent stability with long operation time of 10⁴ s at continuous applied voltage of ‐2 V. The effect of polymer thickness on the volatile memory behavior of PA was also investigated in this study. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A series of new high‐performance materials based on poly[4′‐fluorophenyl‐bis(4‐phenyl)phosphine oxide]

A new series of high‐performance poly(arylene phosphine oxide) (PAPO) materials were synthesized postpolymerization from fluorinated poly(arylene phosphine oxide) (f‐PAPO). The new materials had increased solubility and film‐forming ability over the parent f‐PAPO. With the careful choice of the nucleophile, the thermal stability was also increased. The parent polymer f‐PAPO was synthesized via Ni(0) coupling from aromatic chloride and mesylate monomers. Both monomers were polymerized successfully to create polymers with intrinsic viscosities of 0.235 and 0.123 dL/g, respectively. The higher molecular weight f‐PAPO gave a glass transition of 320 °C and a char yield of 54% at 650 °C in air. The substitution of f‐PAPO via nucleophilic aromatic substitution produced PAPO thermoplastics with significant changes in the properties. The largest increase in the thermal stability relative to f‐PAPO was from 563 to 600 °C 10% weight‐loss values in nitrogen after the displacement of fluoride by 4‐aminophenol, which yielded poly[4‐(4‐aminopheonxyphenyl)bis(4′‐phenyl)phosphine oxide]. Additionally, the char yield increased from 54 to 71% in air at 650 °C. The solubility of the parent polymer was improved after substitution with 3‐tert‐butylphenol, n‐nonylamine, and poly(ethylene glycol)monomethyl ether. All of these became soluble in chloroform, N,N‐dimethylacetamide, and dimethyl sulfoxide. Copolymers were synthesized with 2,5‐dichloro‐4′‐fluorobenzophenone to improve the solubility of f‐PAPO without the loss of thermal stability. These copolymers also underwent nucleophilic aromatic substitution to create an epoxy cure agent that was used with the DEN 431 resin. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2277–2287, 2003     

Synthesis of a benzoxazine with precisely two phenolic OH linkages and the properties of its high‐performance copolymers

A phenolic OH‐containing benzoxazine ( F‐ap ), which cannot be directly synthesized from the condensation of bisphenol F, aminophenol, and formaldehyde by traditional procedures, has been successfully prepared in our alternative synthetic approach. F‐ap was prepared by three steps including (a) condensation of 4‐aminophenol and 5,5'‐methylenebis(2‐hydroxybenzaldehyde) (1) , (b) reduction of the resulting imine linkage by sodium borohydride, and (c) ring closure condensation by formaldehyde. The key starting material, (1) , was prepared from 2‐hydroxybenzaldehyde and s‐trioxane in the presence of sulfuric acid. F‐ap is structurally similar to bis(3,4‐dihydro‐2H‐3‐phenyl‐1,3‐benzoxazinyl)methane ( F‐a, a commercial benzoxazine based on bisphenol F/aniline/formaldehyde) except for two phenolic OHs. The phenolic OHs can provide reaction sites with epoxy and 1,1'‐(methylenedi‐p‐phenylene)bismaleimide (BMI). The structure–property relationships between the thermosets of F‐ap /epoxy, F‐a /epoxy, F‐ap /BMI, and F‐a /BMI were discussed. Experimental data showed that thermosets based on F‐ap /epoxy and F‐ap /BMI provided much better thermal properties than those based on F‐a /epoxy and F‐a /BMI. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2686–2694     

A comparative study of fluorine substituents for enhanced stability of flexible and ITO‐free high‐performance polymer solar cells

Two low‐band gap polymer series based on benzo[1,2‐b:4,5‐b′]dithiophene (BDT) and dithienylbenzothiadiazole, with different numbers of fluorine substituents on the 2,3,1‐benzothiadiazole unit, have been synthesized and explored in a comparative study of the photochemical stability and operational lifetime in flexible large area roll‐coated bulk heterojunction solar cells. The two polymer series have different side chains on the BDT unit, namely 2‐hexyldecyloxy (BDT_HDO) ( P1–P3 ) or 2‐hexyldecylthiophene (BDT_THD) ( P4–P6 ). The photochemical stability clearly shows that the stability enhances along with the number of fluorine atoms incorporated on the polymer backbone. Fabrication of the polymer solar cells based on the materials was carried out in ambient atmosphere on a roll coating/printing machine employing flexible and indium‐tin‐oxide‐free plastic substrates. Solar cells based on the P4–P6 series showed the best performance, reaching efficiencies up to 3.8% for an active area of 1 cm², due to an enhanced current compared to P1–P3 . Lifetime measurements, carried out according to international summit on OPV stability (ISOS), of encapsulated devices reveals an initial fast decay for P1–P6 in the performance followed by a much slower decay rate, still retaining 40–55% of their initial performance after 250 h of testing under ISOS‐L‐1 conditions. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 893–899     

Facile preparation of novel epoxy curing agents and their high‐performance thermosets

Two flame‐retardant epoxy curing agents, 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐yl‐tris(4‐hydroxyphenyl)methane (1) and 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐yl‐ (4‐aminophenyl)‐bis(4‐hydroxyphenyl)methane (2), were prepared by a facile, economic, one‐pot procedure. The structures of the curing agents were confirmed by IR, high‐resolution mass, 1‐D, and 2‐D NMR spectra. A reaction mechanism was proposed for the preparation, and the effect of electron withdrawing/donating effects on the stabilization of the carbocation was discussed. (1‐2) served as curing agents for diglycidyl ether of bisphenol A (DGEBA), dicyclopentadiene epoxy (HP‐7200), and cresol novolac epoxy (CNE). Properties such as glass transition temperature, coefficient of thermal expansion, thermal decomposition temperature, and flame retardancy of the resulting epoxy thermosets were evaluated. The resulting epoxy thermosets show high T_g, low thermal expansion, moderate thermostability, and excellent flame retardancy. The bulky biphenylene phosphinate pendant makes polymer chains difficult to rotate, explaining the high T_g and low thermal expansion characteristic. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7898–7912, 2008     

Bio‐based high‐performance waterborne hyperbranched polyurethane thermoset

Tannic‐acid‐based low volatile organic compound‐containing waterborne hyperbranched polyurethane was prepared. In order to improve the performance, it was modified in an aqueous medium using a glycerol‐based hyperbranched epoxy and vegetable‐oil‐based poly(amido amine) at different wt%. The combined system was cross‐linked by heating at 100°C for 45 min. Fourier transform infrared spectroscopy and swelling study were used to confirm the curing. A dose‐dependent improvement of properties was witnessed for the thermoset. Thermoset with 30 wt% epoxy showed excellent improvements in mechanical properties like tensile strength (~3.4 fold), scratch hardness (~2 fold), impact resistance (~1.3 fold), and toughness (~1.7 fold). Thermogravimetric analysis revealed enhancement of thermal properties (maximum 70°C increment of degradation temperature and 8°C increment of T_g). The modified system showed better chemical and water resistance compared with the neat polyurethane. Biodegradation study was carried out by broth culture method using Pseudomonas aeruginosa as the test organism. An adequate biodegradation was witnessed, as evidenced by weight loss profile, bacterial growth curve, and scanning electron microscope images. The work showed the way to develop environmentally benign waterborne polyurethane as a high‐performance material by incorporating a reactive modifier into the polymer network. Use of benign solvent and bio‐based materials as well as profound biodegradability justified eco‐friendliness and sustainability of the modified system. Copyright © 2015 John Wiley & Sons, Ltd.     

Poly(1,4‐diketo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole‐alt−3,6‐carbazole/2,7‐fluorene) as high‐performance two‐photon dyes

This article reports the synthesis, one‐ and two‐photon absorption, and excited fluorescence properties of poly(1,4‐diketo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole‐alt‐N‐octyl‐3,6‐carbazole/2,7‐fluorene) ( PDCZ / PDFL ). PDCZ and PDFL are synthesized by the Suzuki cross‐coupling of 2,5‐dioctyl‐1,4‐diketo‐3,6‐bis(p‐bromophenylpyrrolo[3,4‐c]pyrrole and N‐octyl‐3,6‐bis(3,3‐dimethyl‐1,3,2‐dioxaborolan‐2‐yl)carbazole or 2,7‐bis(3,3‐dimethyl‐1,3,2‐dioxaborolan‐2‐yl)fluorene and have number‐average molecular weights of 8.5 × 10³ and 1.14 × 10⁴ g/mol and polydispersities of 2.06 and 1.83, respectively. They are highly soluble in common organic solvents and emit strong orange one‐ and two‐photon excited fluorescence (2PEF) in THF solution and exhibit high light and heat stability. The maximal two‐photon absorption cross‐sections (δ) measured in THF solution by the 2PEF method using femtosecond laser pulses are 970 and 900 GM per repeating unit for PDCZ and PDFL , respectively. These 1,4‐diketo‐pyrrolo[3,4‐c]pyrrole‐containing polymers with full aromatic structure and large δ will be promising high‐performance 2PA dyes applicable in two‐photon science and technology. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 944–951     

Polymer cyclization inhibits thermal decomposition of carbon‐dioxide‐derived poly(propylene carbonate)s

Remarkable enhancement of CO₂‐derived poly(propylene carbonate) (PPC) against thermal decomposition was achieved by cyclization of linear PPCs. Thus, a CO₂‐derived linear vinyl‐telechelic PPC was synthesized by CO₂–propylene oxide alternating copolymerization initiated from H₂O followed by an end‐capping esterification with 4‐pentenoic acid. Cyclic PPC was synthesized by the end‐to‐end intramolecular reaction of the vinyl‐telechelic linear PPC by metathesis condensation. Comparison of the thermal decomposition temperature (T_d) with linear and cyclic PPCs confirms surprisingly enhanced T_ds of cyclic PPCs. The elimination of chain ends through cyclization is indeed valuable for enhancing T_d of CO₂‐derived PPCs and thus turn the spotlight on the materials design utilizing CO₂. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3336–3342     

Solution‐processed high‐performance orange phosphorescent and white PLEDs with a high color‐rendering index from an unprecedented π‐stacked and π‐conjugated host material

A blue fluorescent polymer based on poly(vinyl carbazole) (PVK) and terfluorene, combined to make a chemical hybrid at the carbazole unit (PVK‐TF), is fully characterized in this study. PVK‐TF shows useful emission features, such as peaks at 400, 420, 437, 460, and 496 nm, depending on the processing conditions. It possesses a relatively high triplet energy level (2.23 eV), electrochemical stability, good film‐forming ability, and morphological stability. Based on this blue fluorescent material, highly efficient orange phosphorescent polymer light‐emitting diodes (PLEDs) were fabricated with a maximum efficiency of 21.99 cd A^?1, and a maximum luminance of 19552.3 cd m^?2. Single‐layer hybrid white PLEDs were developed, with a high color rendering index of 81.9 that emitted across the whole visible spectrum from 380 to 780 nm, corresponding to the Commission International de L'Eclairage coordinates x, y values of around (0.38, 0.40) and CCT = 3774, with a maximum current efficiency of 10.69 cd A^?1, and a maximum brightness of 15723.3 cd m^?2. © 2014 Wiley Periodicals, Inc. J. Polym. Sci. Part B: Polym. Phys. 2014 , 52, 587–595     

Polymerization of high‐solids‐content acrylic latexes using a nonionic polymerizable surfactant

Stable high‐solids‐content methyl methacrylate/butylacrylate latexes with small particle sizes (in the range of 150–180 nm) were obtained with a nonionic polymerizable surfactant (surfmer). Three percent of surfmer with respect to monomer was proven to be enough for the stabilization of the latexes. The influence of different operational variables on the stabilization of the final latex was analyzed, and the conditions needed to obtain coagulum‐free latex were assessed. The inorganic potassium persulfate/sodium metabisulfite initiator system provided better stability than the organic tert‐butyl hydroperoxide/ascorbic acid as a result of the end groups. In addition, the feeding of acrylic acid during the second half of the polymerization improved the stability of the final latex. The reduction of the feeding time was effective in the stabilization. Proof of the surfmer incorporation into the particles is presented. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1552–1559, 2002     

VinaMPI: Facilitating multiple receptor high‐throughput virtual docking on high‐performance computers

The program VinaMPI has been developed to enable massively large virtual drug screens on leadership‐class computing resources, using a large number of cores to decrease the time‐to‐completion of the screen. VinaMPI is a massively parallel Message Passing Interface (MPI) program based on the multithreaded virtual docking program AutodockVina, and is used to distribute tasks while multithreading is used to speed‐up individual docking tasks. VinaMPI uses a distribution scheme in which tasks are evenly distributed to the workers based on the complexity of each task, as defined by the number of rotatable bonds in each chemical compound investigated. VinaMPI efficiently handles multiple proteins in a ligand screen, allowing for high‐throughput inverse docking that presents new opportunities for improving the efficiency of the drug discovery pipeline. VinaMPI successfully ran on 84,672 cores with a continual decrease in job completion time with increasing core count. The ratio of the number of tasks in a screening to the number of workers should be at least around 100 in order to have a good load balance and an optimal job completion time. The code is freely available and downloadable. Instructions for downloading and using the code are provided in the Supporting Information. © 2013 Wiley Periodicals, Inc.     

Influence of Plasticizers on the Electromechanical Behavior of a P(VDF‐TrFE‐CTFE) Terpolymer: Toward a High Performance of Electrostrictive Blends

This work aims at providing a complete analysis of the effect of plasticizers on the electrostrictive terpolymer performance. To achieve this, several plasticizing agents such as 2‐ethylhexyl phtalate (DEHP), diisononyl phtalate (DINP), and palamoll 652 have been incorporated in the polymer matrix. Experimental results demonstrate that the proposed novel materials exhibited excellent electromechanical enhancement in terms of transverse strain and mechanical energy density under a moderate electric field, which is definitively critical in recent microscale actuation. Another objective of this article was to explore material characteristics as a function of the DINP content, and it was found that the plasticizer weigh fraction was the key parameter determining performance of the modified fluorinate terpolymer blends. Accordingly, it was revealed that high performance flexible actuators can be achieved merely by employing a simple and cheap plasticizer, thus making it possible to overcome the current technological barrier of conventional electroactive polymers that suffer from the high applied electric field usually required to reach sufficient strain. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 355–369     

Poly(arylate‐phosphonate) copolymers with deoxybenzoin in the backbone: Synthesis,characterization, and thermal properties

Deoxybenzoin‐based copolymers containing various relative ratios of arylate and phosphonate units in the backbone were synthesized by solution polycondensation. These copolymers were characterized by gel permeation chromatography, Fourier Transform infrared spectrometry, and proton, carbon, and phosphorous nuclear magnetic resonance spectroscopy (¹H, ¹³C, and ³¹P NMR). Pyrolysis combustion flow calorimetry (PCFC) performed on these copolymers revealed their very low heat release capacity, making them attractive for applications in which halogen‐free, low flammability materials are desired. Integration of phosphonate units into the polymer backbone is advantageous for achieving high molecular weight polymers with solution processbility while retaining the low flammability inherent to deoxybenzoin‐based polymers. Char yields greater than 50% and heat release capacities of 40–60 J/g K, were observed for these copolymers by PCFC. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4573–4580, 2007     

Influence of physical aging on the performance of corona‐charged amorphous polymer electrets

The influence of physical aging on the electret properties before corona charging of three amorphous polymers, polyetherimide (PEI), poly(phenylene ether) (PPE), and polystyrene (PS), as well as with blends of PPE and PS, was investigated. The degree of aging was monitored by determining the enthalpy relaxation Δh using differential scanning calorimetry (DSC). The electret performance was evaluated by isothermal potential decay (ITPD) at elevated temperatures and by thermal stimulated discharge (TSD) measurements. It was demonstrated that physical aging below the glass transition temperature substantially improves the electret performance of amorphous polymers by reducing the free volume and thus hindering charge motion. As an example, the performance of nonaged PEI was improved by physical aging at 200 °C for 4 days from 18 to 95% retained charge after 24 h at 120 °C. A similar beneficial influence of physical aging on the charge storage capability was achieved using blends of PPE with PS. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 990–997, 2010     

Development of high‐performance networked polymers consisting of isocyanurate structures based on selective cyclotrimerization of isocyanates

Selective and quantitative cyclotrimerization of p‐tolylisocyanate proceeded by using sodium p‐toluenesulfinate as a catalyst and 1,3‐dimethylimidazolidinone as a solvent. Exploitation of this system to the cyclotrimerization of methylene diphenyl 4,4′‐diisocyanate (MDI) permitted formation of the corresponding networked polymer, which was selectively consisted of isocyanurate moiety and thus exhibited excellent thermal stability. Utilization of phenyl isocyanate (PhNCO) as a comonomer with varying feed ratio [MDI]₀/[PhNCO]₀ allowed successful control of flexibility of the networked polymers, while retaining its high thermal stability. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Facile and efficient preparation of phosphinate‐functionalized aromatic diamines and their high‐Tg polyimides

Two novel phosphorus‐functionalized aromatic diamines, 1,1‐bis(4‐aminophenyl)‐1‐(6‐oxido‐6H‐dibenz <c,e> <1,2> oxaphosphorin‐6‐yl)ethane ( 1 ) and bis(4‐aminophenyl)‐(6‐oxido‐6H‐dibenz <c,e> <1,2> oxaphosphorin‐6‐yl)phenylmethane ( 2 ), were prepared from 9,10‐dihydro‐oxa‐10‐phosphaphenanthrene‐10‐oxide, 4‐aminoacetophenone, or 4‐aminobenzophenone in excess aniline using p‐toluenesulfonic acid monohydrate as catalyst by an efficient, one‐pot procedure. The effect of electron withdrawing/donating groups on the stabilization of the resulting carbocation seems critical for the success of the process and was discussed in detail. Based on diamines ( 1–2 ), a series of new polyimides, (5a–5d) and (6a–6d) , were prepared, respectively. Polyimides (5a–5d) are flexible and creasable. In contrast, polyimides (6a–6d) are brittle because of the structure rigidity, according to the analysis based on the NMR temperature‐dependent spectra of ( 2 ). Polyimides 5 displaying high T_g (318–392 °C), high moduli (3.39–4.49 GPa), low coefficient of thermal expansion (42–50 ppm/°C), and moderate thermal stability (T_d 5 wt % at 426–439 °C), are excellent high‐T_g and flame‐retardant materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2486–2499, 2009     

A new high‐performance blue to transmissive electrochromic material and use of silver nanowire network electrodes as substrates

Synthesis of a novel, high‐performance blue to transmissive switching electrochromic material is described. The polymer (P1) was prepared by both electrochemical ( P1E ) and chemical ( P1C ) means from the corresponding monomer. The electrochemically synthesized polymer ( P1E ) revealed 64% optical contrast change (on ITO) in the visible region and very fast switching times of 0.32 s (coloration) and 0.90 s (bleaching). On the other hand, the chemically synthesized, solution processable polymer ( P1C ) also showed a high optical contrast value (49%, on ITO) with very fast switching times of 0.86 s for coloration and 0.57 s for bleaching. These high optical contrast values coupled with fast switching times place these materials along with high‐performance blue to transmissive electrochromic polymers. Significantly, these improved characteristics were achieved by side chain engineering of a known, inferior blue to transmissive polymer, PBEBT. Towards fabrication of flexible electrochromic devices, the performance of P1C was also tested on silver nanowire network electrodes. Even though the full potential of the material could not be demonstrated, a good optical contrast of 24% was achieved using these electrodes. Under the same potential range allowed by silver nanowire network electrodes, P1C on ITO showed an optical contrast of 30%. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1680–1686     

Synthesis of fac‐Ir(ppy)3 end‐functionalized poly(1,3‐cyclohexadiene): single monomer addition of fac‐Ir(ppy)2(vppy) for well‐controlled polymer synthesis

Synthesis of the polymer whose end is functionalized by fac‐Ir(ppy)₃ (ppy = 2‐phenylpyridyl) was achieved by using (living) anionic polymerization of 1,3‐cyclohexadiene: the reaction of poly(1,3‐cyclohexadienyl)lithium (PCHDLi) with fac‐Ir(ppy)₂(vppy) [vppy = 2‐(4‐vinylphenyl)pyridyl] resulted in nucleophilic attack of the carbanion in PCHDLi on the vinyl group of fac‐Ir(ppy)₂(vppy) selectively. Complexation of the pyridyl ring protected the α‐carbons of fac‐Ir(ppy)₂(vppy) from the reaction of the anionic polymer. The homopolymerization of fac‐Ir(ppy)₂(vppy) did not occur, and only one molecule of fac‐Ir(ppy)₂(vppy) reacted with the carbanion of PCHDLi and was selectively incorporated into an end of poly(1,3‐cyclohexadiene) (PCHD). Thus, the PCHD with fac‐Ir(ppy)₃ end‐group was obtained with a well‐controlled and defined polymer structure and molecular weight. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012