The electrolyte NRTL model and speciation approach as applied to multicomponent aqueous solutions of H2SO4, Fe2(SO4)3, MgSO4 and Al2(SO4)3 at 230–270 °C

This work presents chemical modeling of solubilities of metal sulfates in aqueous solutions of sulfuric acid at high temperatures. Calculations were compared with experimental solubility measurements of hematite (Fe₂O₃) in aqueous ternary and quaternary systems of H₂SO₄, MgSO₄ and Al₂(SO₄)₃ at high temperatures. A hybrid model of ion-association and electrolyte non-random two liquid (ENRTL) theory was employed to fit solubility data in three ternary systems H₂SO₄–MgSO₄–H₂O, H₂SO₄–Al₂(SO₄)₃–H₂O at 235–270 °C and H₂SO₄–Fe₂(SO₄)₃–H₂O at 150–270 °C. Employing the Aspen Plus™ property program, the electrolyte NRTL local composition model was used for calculating activity coefficients of the ions Al³⁺, Mg²⁺ Fe³⁺ and SO₄²⁻, HSO₄⁻, OH⁻, H₃O⁺, respectively, as well as molecular species. The solid phases were hydronium alunite (H₃O)Al₃(SO₄)₂(OH)₆, hematite Fe₂O₃ and magnesium sulfate monohydrate (MgSO₄)·H₂O which were employed as constraint precipitation solids in calculating the metal sulfate solubilities. A correlation for the equilibrium constants of the association reactions of complex species versus temperature was implemented. Based on the maximum-likelihood principle, the binary interaction energy parameters for the ionic species as well as the coefficients for equilibrium constants of the reactions were obtained simultaneously using the solubility data of the ternary systems. Following that, the solubilities of metal sulfates in the quaternary systems H₂SO₄–Fe₂(SO₄)₃–MgSO₄–H₂O, H₂SO₄–Fe₂(SO₄)₃–Al₂(SO₄)₃–H₂O at 250 °C and H₂SO₄–Al₂(SO₄)₃–MgSO₄–H₂O at 230–270 °C were predicted. The calculated results were in excellent agreement with the experimental data.     

Spectrophotometric determination of nitrite based on its catalytic effect on the oxidation of carminic acid by bromate

A highly sensitive and selective method is described for the determination of trace amounts of nitrite based on its effect on the oxidation of carminic acid with bromate. The reaction was monitored spectrophotometrically by measuring the decrease in absorbance of carminic acid at 490 nm after 3 min of mixing the reagents. The optimum reaction conditions were 1.8×10⁻¹ mol l⁻¹ H₂SO₄, 3.8×10⁻³ mol l⁻¹ KBrO₃, and 1.2×10⁻⁴ mol l⁻¹ carminic acid at 30°C. By using the recommended procedure, the calibration graph was linear from 0.2 to 14 ng ml⁻¹ of nitrite; the detection limit was 0.04 ng ml⁻¹; the R.S.D. for six replicate determinations of 6 ng ml⁻¹ was 1.7%. The method is mostly free from interference, especially from large amounts of nitrate and ammonium ions. The proposed method was applied to the determination of nitrite in rain and river water.     

Solvent extraction of arsenic from acid medium using zinc hexamethylenedithiocarbamate as an extractant

Using zinc hexamethylenedithiocarbamate (Zn(HMDC)₂) and flame atomic absorption spectrometry (FAAS) and/or flow injection hydride generation atomic absorption spectrometry (FI-HGAAS), solvent extraction of As(III) from HCl and H₂SO₄ media into 2,6-dimethyl-4-heptanone (diisobutyl ketone, DIBK) was examined. Arsenic(III) was quantitatively extracted with 2.41×10⁻³ mol l⁻¹ Zn(HMDC)₂ from about 0.004 (pH 2.4) to 4 mol l⁻¹ HCl and H₂SO₄ aqueous solutions. The logarithmic conditional extraction constant of As(HMDC)₃ in the HCl–DIBK system was determined to be 8.3±0.7, by the measurement of the distribution ratios of Zn(II) and As(III). The effectiveness of the proposed extraction method was ascertained in the determination of As in geochemical standard reference materials supplied by the Geological Survey of Japan. Furthermore, the analysis of arsenic in procedural blanks was 0.083±0.003 μg l⁻¹.     

Supported liquid membranes (SLM) for recovery of bismuth from aqueous solutions

In this study, the extraction of Bi(III) from synthetic solutions of 2 M H₂SO₄/0.5 M HCl by supported liquid membranes (SLM) using tri-n-octylphosphine oxide (Cyanex 921) as extractant is reported. First, the nature of the Bi(III)/Cyanex 921 solvates extracted to organic phase (in a solvent extraction system) was determined by the slope method. It was found that Bi(III) reacts with 2 molecules of Cyanex 921 to form the solvate BiCl₃·2Cyanex 921. In the recovery of Bi(III) by the SLM system, parameters that influence extraction efficiency were evaluated, including: support, feed solution and stripping solution nature, and extractant concentration in the organic phase which impregnates the support. Results indicate that Cyanex 921 dissolved in kerosene is not able to extract Bi(III) from H₂SO₄ media. Moreover, transfer of H₂SO₄ was observed. HCl addition to the feed solution up to a maximum concentration of 0.5 M increases Bi(III) extraction. Further increase in HCl concentration causes a decrease in Bi(III) transfer. Likewise, the concentration of Cyanex 921 in the SLM organic phase which produced the maximum Bi(III) extraction was found to be 0.3 M. The performance of H₂O and 0.2 M H₂SO₄ as stripping solutions was evaluated, and it was found that only H₂SO₄ enabled Bi(III) transfer.     

Structures and conformations of trifluoromethanesulfonic anhydride, (CF3SO2)2O, and bis(trifluoromethylsulfonyl)difluoromethane, (CF3SO2)2CF2

The geometric structures and conformational properties of trifluoromethanesulfonic anhydride, (CF₃SO₂)₂O, and bis(trifluoromethylsulfonyl)difluoromethane, (CF₃SO₂)₂CF₂ have been studied by gas electron diffraction (GED) and ab initio calculations (HF/3–21G*). The calculations predict for both systems two stable conformers with C₂ symmetry and one with C₁ symmetry. In both compounds structures with C₂ symmetry and dihedral angles SOSC ≈ 100° ((CF₃SO₂)₂O) and SCSC ≈ 150° ((CF₃SO₂)₂CF₂) are lowest in energy. According to the GED analyses the dominant conformer of (CF₃SO₂)₂O possesses C₂ symmetry with SOSC dihedral angles of 99.1(14)°. The presence of up to 30% of the two other conformers cannot be excluded; for (CF₃SO₂)₂CF₂ only one conformer with C₂ symmetry and SCSC dihedral angles of 143(2)° is observed. A complete set of geometric parameters is given.     

Structures and conformations of trifluoromethanesulfonic anhydride, (CF3SO2)2O, and bis(trifluoromethylsulfonyl)difluoromethane, (CF3SO2)2CF2

The geometric structures and conformational properties of trifluoromethanesulfonic anhydride, (CF₃SO₂)₂O, and bis(trifluoromethylsulfonyl)difluoromethane, (CF₃SO₂)₂CF₂ have been studied by gas electron diffraction (GED) and ab initio calculations (HF/3–21G*). The calculations predict for both systems two stable conformers with C₂ symmetry and one with C₁ symmetry. In both compounds structures with C₂ symmetry and dihedral angles SOSC ≈ 100° ((CF₃SO₂)₂O) and SCSC≈ 150° ((CF₃SO₂)₂CF₂ are lowest in energy. According to the GED analyses the dominant conformer of (CF₃SO₂)₂O₂ possesses C₂ symmetry with SOSC dihedral angles of 99.1(14)°. The presence of up to 30% of the two other conformers cannot be excluded; for (CF₃SO₂)₂CF₂ only one conformer with C₂ symmetry and SCSC dihedral angles of 143(2)° is observed. A complete set of geometric parameters is given.     

Large heteropolymetalate complexes formed from lanthanide (Y, Ce, Pr, Nd, Sm, Eu, Gd), nickel cations and cryptate [As4W40O140]: synthesis and structure characterization

A new family of heteropolytungstate complexes (NH₄)₂₁[Ln(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]·xH₂O(Ln=Y, Ce, Pr, Nd, Sm, Eu, Gd) were prepared by the reaction of Na₂₇[NaAs₄W₄₀O₁₄₀]·60H₂O with NiCl₂·6H₂O and Ln(NO₃)₃·xH₂O at pH≈4.5. The crystal structures of (NH₄)₂₁[Gd(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]·51H₂O was determined by X-ray diffraction analysis and element analysis. The compound crystallizes in the monoclinic space group P2₁/n with a=19.754(3), b=24.298(4), c=39.350(6) Å, β=100.612(3)°, V=18564(5) ų, Z=2, R1(wR₂)=0.0544(0.0691). The central site S1 and two opposite sites S2 of the big cyclic ligand [As₄W₄₀O₁₄₀]²⁸⁻ are occupied by one Ln³⁺and two Ni²⁺, respectively, each site supply four O_d coordinating to metal ion, another one water molecule and other five water molecules coordinate, respectively, to Ni²⁺and Ln³⁺. Polyanion [Ln(H₂O)₅{Ni(H₂O)}₂As₄W₄₀O₁₄₀]²¹⁻ has C_2v symmetry. IR and UV–vis spectra of [NaAs₄W₄₀O₁₄₀]²⁷⁻ of the title compounds are discussed.     

Syntheses and structural determination of nine-coordinate K3[Nd(nta)2(H2O)]·6H2O and K3[Er(nta)2(H2O)]·5H2O

The syntheses and structural determination of Nd^III and Er^III complexes with nitrilotriacetic acid (nta) were reported in this paper. Their crystal and molecular structures and compositions were determined by single-crystal X-ray structure analyses and elemental analyses, respectively. The crystal of K₃[Nd^III(nta)₂(H₂O)]·6H₂O complex belongs to monoclinic crystal system and C2/c space group. The crystal data are as follows: a=1.5490(11) nm, b=1.3028(9) nm, c=2.6237(18) nm, β=96.803(10)°, V=5.257(6) nm³, Z=8, M=763.89, D_c=1.930 g cm⁻³, μ=2.535 mm⁻¹ and F(000)=3048. The final R₁ and wR₁ are 0.0390 and 0.0703 for 4501 (I>2σ(I)) unique reflections, R₂ and wR₂ are 0.0758 and 0.0783 for all 10474 reflections, respectively. The Nd^IIIN₂O₇ part in the [Nd^III(nta)₂(H₂O)]³⁻ complex anion has a pseudo-monocapped square antiprismatic nine-coordinate structure in which the eight coordinate atoms (two N and six O) are from the two nta ligands and a water molecule coordinate to the central Nd^III ion directly. The crystal of the K₃[Er^III(nta)₂(H₂O)]·5H₂O complex also belongs to monoclinic crystal system and C2/c space group. The crystal data are as follows: a=1.5343(5) nm, b=1.2880(4) nm, c=2.6154(8) nm, b=96.033(5)°, V=5.140(3) nm³, Z=8, M=768.89, D_c=1.987 g cm⁻³, μ=3.833 mm⁻¹ and F(000)=3032. The final R₁ and wR₁ are 0.0321 and 0.0671 for 4445 (I>2σ(I)) unique reflections, R₂ and wR₂ are 0.0432 and 0.0699 for all 10207 reflections, respectively. The Er^IIIN₂O₇ part in the [Er^III(nta)₂(H₂O)]³⁻ complex anion has the same structure as Nd^IIIN₂O₇ part in which the eight coordinate atoms (two N and six O) are from the two nta ligands and a water molecule coordinate to the central Nd^III ion directly.     

Preparation of a discotic 2,4,7,9-tetraaryl-6H-dibenzo[c,e][1,2]thiazine and generation of a persistent Radical 1

6H-Dibenzo[d,e][1,2]thiazine substituted with four 3,4-dioctyloxyphenyl groups forms a room temperature discotic phase with a clearing temperature of 104°C. Oxidation of the thiazine 2b with either metal oxides (PbO₂ or AgO) or SO₂Cl₂ gave a moderately stable radical 1b (a _N = 0.95 mT, g = 2.0045). Full conversion of 2b to 1b was observed with AgO in a toluene/MeCN mixture or with SO₂Cl₂. The radical 1b was isolated in the neat form with the latter oxidant. It shows sensitivity to molecular oxygen, which hampered its purification and subsequent thermal and magnetic studies.     

Hydrothermal synthesis, crystal structure and characterization of [Zn(H2O)4]2 [H2As6V15O42(H2O)]·2H2O

The compound [Zn(H₂O)₄]₂[H₂As₆V₁₅O₄₂(H₂O)]·2H₂O (1) has been synthesized and characterized by elemental analysis, IR, ESR, magnetic measurement, third-order nonlinear property study and single crystal X-ray diffraction analysis. The compound 1 crystallizes in trigonal space group R3, a=b=12.0601(17) Å, c=33.970(7) Å, γ=120°, V=4278.8(12) Å³, Z=3 and R1(wR2)=0.0512 (0.1171). The crystal structure is constructed from [H₂As₆V₁₅O₄₂(H₂O)]⁴⁻ anions and [Zn(H₂O)₄]²⁺ cations linked through hydrogen bonds into a network. The [H₂As₆V₁₅O₄₂(H₂O)]⁶⁻ cluster consists of 15 VO₅ square pyramids linked by three As₂O₅ handle-like units.     

Thermal decomposition study on mixed ligand thymine complexes of divalent nickel(II) with dianions of some dicarboxylic acids

Thermal decomposition of mixed ligand thymine (2,4-dihydroxy-5-methylpyrimidine) complexes of divalent Ni(II) with aspartate, glutamate and ADA (N-2-acetamido)iminodiacetate dianions was monitored by TG, DTG and DTA analysis in static atmosphere of air. The decomposition course and steps of complexes [Ni(C₅H₆N₂O₂)(C₄H₅NO₄)²⁻(H₂O)₂]·H₂O, [Ni(C₅H₆N₂O₂)(C₅H₇NO₄)²⁻(H₂O)₂]·H₂O and [Ni(C₅H₆N₂O₂)(C₆H₈N₂O₅)²⁻(H₂O)₂]·1.5H₂O were analyzed. The final decomposition products are found to be the corresponding metal oxides. The kinetic parameters namely, activation energy (E*), enthalpy (ΔH*), entropy (ΔS*) and free energy change of decomposition (ΔG*) are calculated from the TG curves using Coats–Redfern and Horowitz–Metzger equations. The stability order found for these complexes follows the trend aspartate > ADA > glutamate.     

Equilibrium and structural studies of silicon(IV) and aluminium(III) in aqueous solution—10. A potentiometric study of aluminium(III) pyrocatecholates and aluminium(III) hydroxo pyrocatecholates in 0.6 M Na(Cl)

Equilibria between aluminium(III), pyrocatechol (1,2-dihydroxybenzene, H₂L) and OH⁻ were studied in 0.6 M Na(Cl) medium at 25°C. The measurements were performed as emf titrations (glass electrode) within the limits 1.5 ≤ − log[H⁺] ≤ 9; 0.0005 ≤ B ≤ 0.015 M; 0.006 ≤ C ≤ 0.03 M and 2 ≤ C/B ≤ 30 (B and C stand for the total concentrations of aluminium(III) and pyrocatechol respectively). All data can be explained with a main series of complexes: A1L⁺, log β_−2,1,1 = − 6.337 ± 0.005; A1L₂⁻, log β_−4,1,2 = −15.44 ± 0.017 and A1L₃³⁻, log β_−6,1,3 = − 28.62 ± 0.024 together with two minor species: Al(OH)L₂²⁻, log β_−5,1,2 = − 23.45 ± 0.079 and Al₃(OH)₃L₃, log β_−9,3,3 = − 29.91 ± 0.066. Of the two, the latter probably is a type of average composition complex principally occurring at low C/B quotients. The first acidity constant for pyrocatechol as determined in separate experiments is log β_−1,0,1 = − 9.198 ± 0.001. The standard deviations given are 3σ(log β p,q,r). Data were analyzed with the least squares computer program LETAGROPVRID. In a model calculation using kaolinite as solid phase, we compared the complexation ability of this system with that of the system Al³⁺-OH⁻-salicylic acid, reported earlier in this series.     

Optimised hydrothermal synthesis of multi-dimensional hybrid coordination polymers containing flexible organic ligands

In this paper, we summarise our recent research interest in the hydrothermal synthesis and structural characterisation of multi-dimensional coordination polymers. The use of N-(phosphonomethyl)iminodiacetic acid (also referred to as H₄pmida) in the literature as a versatile chelating organic ligand is briefly reviewed. This molecule plays an important role in the formation of centrosymmetric dimeric [V₂O₂(pmida)₂]⁴⁻ anionic units, which were first used by us as building blocks to construct novel coordination polymers. Starting with [V₂O₂(pmida)₂]⁴⁻ in solution, we have isolated [M₂V₂O₂(pmida)₂(H₂O)₁₀] species (where M²⁺ = Mn²⁺, Co²⁺ or Cd²⁺) via the hydrothermal synthetic approach, which were then employed for the construction of [CdVO(pmida)(4,4′-bpy)(H₂O)₂]·(4,4′-bpy)_0.5·(H₂O), [CoVO(pmida)(4,4′-bpy)(H₂O)₂]·(4,4′-bpy)_0.5, [Co(H₂O)₆][CoV₂O₂(pmida)₂(pyr)(H₂O)₂]·2(H₂O) and [Cd₂V₂O₂(pmida)₂(pyr)₂(H₂O)₄]·4(H₂O) by the inclusion of bridging organic ligands in the reactive mixtures, such as pyrazine (pyr) and 4,4′-bipyridine (4,4′-bpy). These materials can contain channel systems, and exhibit magnetic behaviour, not only due to the V⁴⁺ centres but also to the transition metal centres which establish the links between neighbouring dimeric [V₂O₂(pmida)₂]⁴⁻ anionic units. A closely related anionic moiety, [Ge₂(pmida)₂(OH)₂]²⁻, was engineered to allow the study of such crystalline hybrid materials using one- and two-dimensional high-resolution solid-state NMR.     

Persulphate quenching of the excited state of ruthenium(II) tris-bipyridyl dication: thermal reactions

The rate constant for the reaction between the sulphate radical (SO₄^√−) and the ruthenium (II) tris-bipyridyl dication (Ru(bipy)₃²⁺) is (3.3±0.2)×10⁹ mol⁻¹ dm³ s⁻¹ in 1 mol dm⁻³ H₂SO₄ and (4.9±0.5)×10⁹ mol⁻¹ dm³ s⁻¹ in 0.1 mol dm⁻³, pH 4.7 acetate buffer. The SO₄^√−radical produced by the electron transfer quenching of Ru(bipy)₃^2+* by S₂O₈²⁻ reacts rapidly with both acetate buffer and chloride ions. These side reactions result in a reduction in the overall quantum yield of Ru(bipy)₃³⁺ production and reduced reaction selectivity when Ru(bipy)₃^2+* is quenched by persulphate.     

Low-temperature heat capacity and thermodynamic properties of crystalline [Re2(Ala)4(H2O)8](ClO4)6 (Re = Eu, Er; Ala = alanine)

[Re₂(Ala)₄(H₂O)₈](ClO₄)₆ (Re=Eu, Er; Ala=alanine) were synthesized, and the low-temperature heat capacities of the two complexes were measured with a high-precision adiabatic calorimeter over the temperature range from 80 to 370 K. For [Eu₂(Ala)₄(H₂O)₈](ClO₄)₆, two solid–solid phase transitions were found, one in the temperature range from 234.403 to 249.960 K, with peak temperature 243.050 K, the other in the range from 249.960 to 278.881 K, with peak temperature 270.155 K. For [Er₂(Ala)₄(H₂O)₈](ClO₄)₆, one solid–solid phase transition was observed in the range from 270.696 to 282.156 K, with peak temperature 278.970 K. The molar enthalpy increments, ΔH_m, and entropy increments,ΔS_m, of these phase transitions, were determined to be 455.6 J mol⁻¹, 1.87 J K⁻¹ mol⁻¹ at 243.050 K; 2277 J mol⁻¹, 8.43 J K⁻¹ mol⁻¹ at 270.155 K for [Eu₂(Ala)₄(H₂O)₈](ClO₄)₆; and 4442 J mol⁻¹, 15.92 J K⁻¹ mol⁻¹ at 278.970 K for [Er₂(Ala)₄(H₂O)₈](ClO₄)₆. Thermal decompositions of the two complexes were investigated by use of the thermogravimetric (TG) analysis. A possible mechanism for the thermal decomposition is suggested.     

Speciation of Cr(III) and Cr(VI) in water after preconcentration of its 1,5-diphenylcarbazone complex on amberlite XAD-16 resin and determination by FAAS

A simple and sensitive method for the speciation, separation and preconcentration of Cr(VI) and Cr(III) in tap water was developed. Cr(VI) has been separated from Cr(III) and preconcentrated as its 1,5-diphenylcarbazone complex by using a column containing Amberlite XAD-16 resin and determined by FAAS. Total chromium has also been determined by FAAS after conversion of Cr(III) to Cr(VI) by oxidation with KMnO₄. Then, Cr(III) has been calculated by subtracting Cr(VI) from the total. The effect of acidity, amount of adsorbent, eluent type and flow rate of the sample solution on to the preconcentration procedure has been investigated. The retained Cr(VI) complex was eluated with 10 ml of 0.05 mol l⁻¹ H₂SO₄ solution in methanol. The recovery of Cr(VI) was 99.7±0.7 at 95% confidence level. The highest preconcentration factor was 25 for a 250 ml sample volume. The detection limit of Cr(VI) was found as 45 μg l⁻¹. The adsorption capacity of the resin was found as 0.4 mg g⁻¹ for Cr (VI). The effect of interfering ions has also been studied. The proposed method was applied to tap water samples and chromium species have been determined with the relative error <3%.     

Structural, spectral and thermal properties of a polymeric nickel(II) complex containing two-dimensional network

The structure of the complex [Ni(hmt)(NCS)₂(H₂O)₂]_n, assembled by hexamethylenetetramine (hmt) and octahedral Ni(II), is reported. Crystal data: Fw 351.07, a=9.885(10) Å, b=12.06(1) Å, c=12.505(8) Å, β=114.41(4)°, V=1357(1) ų, Z=4, space group=C2/c, T=173 K, λ(Mo−K)=0.71070 Å, ρ_calc=1.718 gcm⁻¹, μ=17.44 cm⁻¹, R=0.099, Rw=0.145. The tetrahedral assembling template effect of the hmt molecule is completed by two coordination bonds and two hydrogen interactions. The UV–vis absorption spectrum of this complex [Ni(hmt)(NCS)₂(H₂O)₂]_n with a two-dimensional network is determined in the range of 5000–35000 cm⁻¹ at room temperature. The observed spectrum is discussed and explained perfectly by the scaling radial theory proposed by us. The two-dimensional structure has no apparent effects on the d–d transitions of the central Ni(II) ion. The IR spectrum and the GT curve of the complex were also measured and clearly reflect its structural properties.     

Determination of As(III) and total inorganic arsenic by flow injection hydride generation atomic absorption spectrometry

A simple procedure was developed for the direct determination of As(III) and As(V) in water samples by flow injection hydride generation atomic absorption spectrometry (FI–HG–AAS), without pre-reduction of As(V). The flow injection system was operated in the merging zones configuration, where sample and NaBH₄ are simultaneously injected into two carrier streams, HCl and H₂O, respectively. Sample and reagent injected volumes were of 250 μl and flow rate of 3.6 ml min⁻¹ for hydrochloric acid and de-ionised water. The NaBH₄ concentration was maintained at 0.1% (w/v), it would be possible to perform arsine selective generation from As(III) and on-line arsine generation with 3.0% (w/v) NaBH₄ to obtain total arsenic concentration. As(V) was calculated as the difference between total As and As(III). Both procedures were tolerant to potential interference. So, interference such as Fe(III), Cu(II), Ni(II), Sb(III), Sn(II) and Se(IV) could, at an As(III) level of 0.1 mg l⁻¹, be tolerated at a weight excess of 5000, 5000, 500, 100, 10 and 5 times, respectively. With the proposed procedure, detection limits of 0.3 ng ml⁻¹ for As(III) and 0.5 ng ml⁻¹ for As(V) were achieved. The relative standard deviations were of 2.3% for 0.1 mg l⁻¹ As(III) and 2.0% for 0.1 mg l⁻¹ As(V). A sampling rate of about 120 determinations per hour was achieved, requiring 30 ml of NaBH₄ and waste generation in order of 450 ml. The method was shown to be satisfactory for determination of traces arsenic in water samples. The assay of a certified drinking water sample was 81.7±1.7 μg l⁻¹ (certified value 80.0±0.5 μg l⁻¹).     

Structural and spectroscopic properties of Hexamethylenetetramine cobalt(II) complex: [Co(NCS)2(hmt)2(H2O)2][Co(NCS)2(H2O)4] (H2O)

Synthesis, structure, spectroscopy and thermal properties of complex [Co(NCS)₂(hmt)₂(H₂O)₂][Co(NCS)₂(H₂O)₄] (H₂O) (I), assembled by hexamethylenetetramine and octahedral Co(II) metal ions, are reported. Crystal data for I: F_w 387.34, a=9.020(8), b=12.887(9), c=7.95(1) Å, =96.73(4), β=115.36(5), γ=94.16(4)°, V=820(1) Å³, Z=2, space group=P−1, T=173 K, λ(Mo-K)=0.71070 Å, ρ_calc=1.718567 g cm⁻³, μ=17.44 cm⁻¹, R=0.088, R_w=0.148. An interesting two-dimensional network is assembled via hydrogen bonds through coordinated and free water molecules. The d–d transition energy levels of Co(II) ion are determined by UV–vis spectroscopy and calculated by ligand field theory. The calculated results agree well with experiment ones.     

Synthesis and enthalpy of formation of SrB4O7·3H2O

Hydrated strontium borate, SrB₄O₇·3H₂O, has been synthesized and characterized by XRD, FT-IR, DTA-TG and chemical analysis. The molar enthalpy of solution of SrB₄O₇·3H₂O in 1 mol dm⁻³ HCl(aq) was measured to be (21.15 ± 0.29) kJ mol⁻¹. With incorporation of the previously determined enthalpies of solution of Sr(OH)₂·8H₂O(s) in [HCl(aq) + H₃BO₃(aq)] and H₃BO₃ in HCl(aq), and the enthalpies of formation of H₂O(l), Sr(OH)₂·8H₂O(s) and H₃BO₃(s), the enthalpy of formation of SrB₄O₇·3H₂O was found to be −(4286.7 ± 3.3) kJ mol⁻¹.