具有强酸性位的高水热稳定介孔分子筛的合成

在强酸性介质中,以预先制备的β沸石纳米簇作为前驱体,通过S＋X－I＋路线及氨水热后处理步骤合成具有强酸性位的高水热稳定性介孔分子筛.XRD、氮气吸附、HRTEM和SEM分析表明所得样品具有普通MCM-41的典型介孔结构和表观形貌.较短的组装周期和室温的组装条件减弱了脱铝效应,27Al MAS NMR表明铝元素主要以四配位状态存在于介孔分子筛骨架中.采用NH3-TPD和水热老化方法分别考察了其固体酸性和水热稳定性,结果表明此介孔分子筛相对于普通MCM-41分子筛具有较强酸性位和较高的水热稳定性.沸石纳米簇的引入提高了分子筛骨架的聚合度和孔壁的厚度,是水热稳定性提高的主要原因.     

由沸石纳米粒子自组装制备具有高催化活性中心和水热稳定的新型介孔分子筛材料

 人们合成了一系列介孔分子筛材料，并发现它们在催化、吸附与分离以及化学组装制备先进材料和分子器件等方面具有很大的潜在应用价值．但是，介孔分子筛材料相对于微孔沸石分子筛存在着两个致命弱点：较低的水热稳定性和较不活泼的催化活性中心．这两个弱点大大地影响了介孔分子筛在催化反应中的广泛应用．本文系统地综述了最近几年利用沸石纳米粒子自组装制备具有高催化活性中心和水热稳定的介孔分子筛材料的研究进展．这包括利用硅铝沸石纳米粒子自组装制备具有强酸性和水热稳定的新型介孔硅铝分子筛材料，利用钛硅沸石纳米粒子自组装制备具有高催化氧化活性中心和水热稳定的新型钛硅介孔分子筛材料，以及利用含有不同杂原子的沸石纳米粒子自组装制备一系列水热稳定的新型介孔分子筛催化材料．     

介孔分子筛的酸性和水热稳定性

介孔分子筛材料在催化、吸附与分离以及化学组装制备先进材料和分子器件等方面具有潜在的应用价值.但是,由于介孔分子筛材料较低的水热稳定性和较弱的酸性,极大地影响了其在催化研究中的广泛应用.本文系统地综述了最近几年在提高介孔分子筛酸性和水热稳定性的研究工作.其中包括:(1)将超酸组份负载于介孔分子筛的孔道中以达到提高介孔分子筛材料的酸强度的目的;(2)通过在合成介孔分子筛的过程中加入无机盐和有机胺等助剂或采用合适的后处理方法以提高介孔分子筛的水热稳定性;(3)通过新型模板剂来合成具有较高水热稳定性的介孔分子筛材料;(4)利用具有沸石分子筛基本结构单元的沸石分子筛导向剂与表面活性剂自组装来合成具有强酸中心和高温水热稳定的介孔分子筛材料.     

形貌可控的微孔-介孔硅磷铝酸盐在大分子催化裂化中具有较高的催化活性

目前,随着世界原油资源的日趋重质化,催化裂化工艺已经成为石油加工过程中重油的轻质化和渣油裂解的重要方法.但是如何提高催化裂化转化率和小分子烯烃的选择性是目前催化裂化工艺研究的重要课题,而催化裂化的关键是催化剂.重质油大分子催化裂化时存在的问题是由于传统的微孔分子筛只具有单一的1nm以下的微孔孔道,而重油大分子通常较大、分子链较长,很难进入到微孔孔道中充分反应,因此传统微孔分子筛对重油大分子的反应极为不利.以MCM-41为代表的介孔分子筛具有较大的孔道直径(1.5～10nm),在催化裂化炼油工业中具有潜在的应用前景,但其较弱的酸性和较差的水热稳定性无法满足裂化过程对催化剂酸性和水热稳定性的要求,因此限制了介孔分子筛在工业催化领域中的应用.微孔-介孔复合分子筛具有微孔和介孔双模型孔分布,结合了介孔分子筛的孔道优势与微孔分子筛强酸性和高水热稳定性的优势,可使两种材料优势互补、协同作用,在大分子催化与吸附方面具有潜在的应用前景,受到分子筛化学家的广泛关注.前人主要对硅铝基微孔-介孔复合分子筛进行了大量的研究,本文将传统的硅铝基微孔-介孔复合分子筛扩展到了硅磷铝基微孔-介孔复合分子筛.在酸性室温条件下,通过两步路线合成了一种新颖且形貌可控的微孔-介孔硅磷铝酸盐MUS-5,考察了不同pH值条件下MUS-5形貌的变化,并借助X射线粉末衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)、N2吸附-脱附、NH3-TPD等技术对其物相、形貌、结构及酸性进行了表征.研究结果表明:当溶液体系的pH值在2.0到5.0之间变化时,可以得到三种不同形貌(包括链状、花状、桶状)的MUS-5,且MUS-5均是由微孔SAPO-5相和介孔MCM-41相组成的.同时,对MUS-5复合材料的水热稳定性进行了研究,经过100℃水热条件下处理48h后,发现MUS-5结构中的介孔相依然存在,表明该材料具有较好的水热稳定性.最后,采用1,3,5-三异丙基苯作为探针分子评价了MUS-5催化剂的裂化性能,并在相同反应条件下与微孔SAPO-5催化剂进行了比较.催化评价结果显示:MUS-5的裂化性能远远高于微孔SAPO-5分子筛.其原因主要是由于MUS-5具有微孔和介孔双模型孔分布,结合了介孔相MCM-41的孔道优势与微孔相SAPO-5强酸性的优势,致使其催化性能大大提高.说明这种具有微孔-介孔孔道结构的硅磷铝酸盐MUS-5在大分子裂化方面应用前景广阔.     

MSU-SMFI和MCM-41的催化裂化及烷基化活性比较

以MFI沸石前驱体作为基本结构单元组装介孔硅铝分子筛MSU-S_MFI. XRD和氮气吸附数据表明MSU-SMFI具有类似MCM-41的六方排列介孔孔道结构,而且其织构参数和以传统方法合成的含铝MCM-41也大体相当.NH₃-TPD显示由沸石前驱体组装的MSU-S_MFI较硅铝比相同的含铝MCM-41介孔分子筛的固体酸量显著提高.MSU-S_MFI上的异丙苯催化裂化转化率比含铝MCM-41提高31％, 1,3,5-三异丙苯在MSU-S_MFI上也发生了更深的裂解. MSU-S_MFI上萘的叔丁基化的转化率比含铝MCM-41提高了15％.以沸石前驱体作为基本结构单元是提高介孔分子筛固体酸性的有效方法.     

前驱体组装高水热稳定性介孔分子筛MSU-S

采用硅铝基微孔分子筛前驱体,组装合成出高水热稳定性的介孔分子筛MSU-S,并采用XRD、SEM、FT-IR、BET等考察了硅铝基前驱体的晶化时间对MSU-S有序度和水热稳定性的影响.结果表明,利用晶化一定时间的前驱体,可以组装出有序度高、水热稳定性好的介孔分子筛MSU-S,该分子筛经800℃水热处理2 h后,还可以保留完整的介孔结构.     

天然CXN沸石分子筛水热稳定性研究 II. 水蒸汽处理温度对铵型沸石物化性质的影响

在前文研究天然Stilbite沸石(CXN沸石)水热稳定性影响因素的基础上, 以27Al与29Si MAS NMR, NH3-TPD和低温氮吸附等详细研究了铵型CXN沸石骨架铝配位状态和硅配位状态, 表面酸性与孔性质等与水蒸汽处理温度的关系. 随温度升高, 沸石骨架硅铝比逐渐提高, 并伴随硅羟基缺陷增多. 经750 ℃水蒸汽处理3 h后沸石骨架硅铝比可达到21.3. 沸石总酸量随水蒸汽处理温度的提高而降低, 沸石骨架铝脱除造成沸石孔道部分被堵塞, 但同时形成有利于分子扩散的介孔.     

具有多级孔的纯硅沸石材料的合成

采用表面活性剂组装沸石晶种的方法, 研究了不同浓度的非离子表面活性剂 P123 对组装的纳米Silicalite-1沸石晶粒的形貌和性质的影响. 实验发现, 在稀溶液体系中 P123 组装的沸石颗粒既在低角区呈现出介孔材料的特性, 又在高角区表现出沸石的结构特征; TEM证实纳米粒子间存在无序的蠕虫状介孔孔道.     

二氧化锡纳米粒子在高硅TON，MFI和FAU型沸石外表面的形成和聚集

将高硅TON, MFI和FAU沸石分别浸渍于SnCl₂溶液，再于873 K温度下焙烧，在高硅TON,MFI和FAU沸石外表面制备出二氧化锡纳米粒子。用XRD和SAED表征生成物的物相，TEM表征形成二氧化锡纳米粒子的形貌、尺寸和聚集状态。结果显示：在TON, MFI和FAU沸石外表面形成二氧化锡纳米粒子的尺寸分别在8 nm, 10-80 nm和6 nm。在室温下用40%的氢氟酸分解SnO₂-TON和SnO₂-MFI分别得到二氧化锡微胶囊和网状的二氧化锡纳米结构。同在NaY沸石表面形成的纳米二氧化锡比较，在具有一维孔道体系的TON沸石和二维孔道体系的MFI沸石外表面形成的纳米二氧化锡的形貌与聚集状态都不相同，这表明沸石的骨架类型、表面结构与特性在沸石外表面形成二氧化锡纳米结构时起重要作用。     

基于MCM-41硬模板的镍铁磁性纳米管的合成及其磁性研究

以Si-MCM-41为硬模板,利用介孔材料的吸附作用,将Fe3+和Ni 2+按一定比例定量吸附组装到介孔材料的孔壁上;然后通过程序升温在900℃条件下高温焙烧,并经氢氟酸处理,得到直径大约为3.0nm的中空铁氧体纳米管.分别利用傅立叶变换红外光谱仪、扫描电镜、透射电镜、X射线衍射仪分析了合成材料的结构、组成、形貌;采用振动样品磁强计测定了其磁性能.结果表明,合成的镍铁氧体纳米管具有良好的管状形貌,其结构与分子筛MCM-41的结构相似,并具有良好的磁学性能.这说明MCM-41分子筛孔道结构具有可复制性,本研究可望为制备具有适当长径比的一维纳米磁性材料打下良好基础.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.