双压电体界面上的电偶极子和裂纹

求得了压电体双材料界面上的孤立二维电偶极子的解析解,结果表明某点电偶极子激发的应力一电位移场与该点到电偶极子的距离的平方成反比.研究了压电体双材料界面上的电偶极子对裂纹的作用,得到了问题的闭合解.在电偶极子的作用下,界面裂纹裂尖近区应力-电位移仍具有r-1/2+iεα的振荡奇异性,文中求得裂尖应力强度因子,当电偶极子距裂尖距离ρ很近时,裂尖应力强度因子与ρ-3/2-iεα成比例.     

压电体中裂纹与孤立电偶极子的相互作用

研究压电体裂纹与电偶极子的相互作用,得到问题的闭合解,包括应力-电位移场,裂纹张开位移和电势差,以及裂尖应力强度因子,结果表明,电偶极子的方向对裂纹场的影响可由压电体各向异性方向函数表示;当电偶极子位于裂尖附近时,在原点取在裂尖的局部极坐标系中电偶极子位置的极角对裂尖场的影响可由各向异性方向函数表示,电偶极子引起的裂尖应力强度因子与其距裂尖的距离的-3/2次幂成正比。     

热释电材料问题的通解与界面裂纹

该文讨论了热释电材料中的热弹性问题的一般解，进而求解了共线界面裂纹问题．利用Ｓｔｒｏｈ方法，把热释电材料的热弹性界面裂纹问题化为一向量形式的Ｈｉｌｂｅｒｔ问题，求出这一Ｈｉｌｂｅｒｔ问题的通解，进而求得了热释电材料热弹性界面裂纹的闭合解，得到了温度、热流、位移、电势、应力和电位移的全场解，得到了裂纹张开位移及电势差的精确表达式．在此基础上，还求得了均匀热释电体中单个热弹性裂纹裂尖场，单个界面裂纹裂尖场以及点热源与界面裂纹的作用．此外，该文还对界面裂纹顶点附近的端部场作了渐近分析．     

功能梯度压电材料反平面裂纹问题

基于三维弹性理论和压电理论，导出了材料系数在横观各向同性平面内梯度分布的压电体的状态方程，进而对材料系数指数函数规律分布的半无限大压电体中的反平面裂纹问题进行了求解，利用Fourier变换给出了半无限大压电体中位移，应力，电势及电位移的解析表达式，并求得了裂纹尖端的应力强度因子和电位移强度因子，分析了不同的非均匀材料系数及几何尺寸对它们的影响。     

有限尺寸下双材料界面附近裂纹位置对裂纹尖端的影响

随着复合材料的应用和发展,不同材料组成的界面结构越来越受到人们的重视。界面层两侧材料的性能相异会引起材料界面端奇异性,同时界面和界面附近存在裂纹会引起裂尖处的应力奇异性。因此双材料界面附近的力学分析是比较复杂的。本文建立双材料直角界面模型,在材料界面附近预设初始裂纹,计算了有限材料尺寸对界面应力场及其附近裂纹应力强度因子的影响。运用弹性力学中的 Goursat 公式求得直角界面端在有限尺寸下的应力场以及其应力强度系数。通过叠加原理和格林函数法进一步得到在直角界面端附近的裂纹尖端应力强度因子。计算结果表明,在适当范围内改变材料内裂纹与界面之间的距离,界面附近裂纹尖端的应力强度因子随着裂纹与界面距离的增加而减少,并且逐渐趋于稳定。分析结果可以为预测双材料结构复合材料界面失效位置提供参考。     

应用半权函数法计算界面裂纹的应力强度因子

应用半权函数法求解双材料界面裂纹的应力强度因子，得到以半权函数对参考位移与应力加权积分的形式表示的应力强度因子。针对特征值为复数λ的双材料界面裂纹裂尖应力和位移场，设置与之对应特征值为-λ的位移函数，即半权函数。半权函数的应力函数满足平衡方程，应力应变关系，界面的连续条件以及在裂纹面上面力为0；半权函数与裂纹体的几何尺寸无关，对边界条件没有要求。由功的互等定理得到应力强度因子KⅠ和KⅡ的积分形式表达式。本文计算了多种情况下界面裂纹应力强度因子的算例，与文献结果符合得很好。由于裂尖应力的振荡奇异性已经在积分中避免，只需考虑绕裂尖远场的任意路径上位移和应力，即使采用该路径上较粗糙的参考解也可以得到较精确的结果。     

各向异性双材料界面裂纹扩展裂尖场

应用界面断裂力学理论和Stroh方法,研究了广义平面变形下动态裂纹沿着各向异性双材料界面扩展时的裂尖奇异应力及动态应力强度因子.双材料界面的动态裂尖区域特性主要由两个实矩阵W和D确定,且裂尖奇异应力和动态应力强度因子可以由包含这两个矩阵的柯西奇异积分方程确定,同时给出了动态应力强度因子和能量释放率的显示表达式.算例得出当裂纹以小速度扩展时,裂尖振荡因子ε与静态时几乎相同,当界面裂纹扩展速度接近瑞利波速时,ε趋于无穷大;同时得出应力强度因子及能量释放率随裂纹扩展速度的变化关系.     

压电材料反平面应变状态的椭圆夹杂及界面裂纹问题

本文采用共法求解了压电材料反平面变形的椭圆夹杂及界面裂纹问题，前者的解答表明当远场外力均匀分布对夹杂内的应力场及电位移场是常量，后者解答表明在界面裂纹的裂尖处，应力及电位移都具有γ＾－１／２的奇异性。     

夹杂对两相材料界面裂纹的影响

根据界面上应力和位移的连续条件,得到了单向拉伸状态下,含有椭圆夹杂的无限大双材料组合板的复势解。进一步通过求解Hilbert问题,得到了含有夹杂和半无限界面裂纹的无限大板的应力场,并由此给出了裂尖的应力强度因子K。计算了夹杂的形状、夹杂的位置、夹杂的材料选取以及上、下半平面材料与夹杂材料的不同组合对裂尖应力强度的影响。计算结果表明夹杂到裂尖的距离和夹杂材料的性质对K影响较大,对于不同材料组合,该影响有较大差异。夹杂距裂尖较近时,会对K产生明显屏蔽作用,随着夹杂远离裂尖,对K的影响也逐渐减小。另外,软夹杂对K有屏蔽作用,硬夹杂对K有反屏蔽作用,而夹杂形状对K几乎没有影响。     

基于新型裂尖杂交元的压电材料断裂力学研究

提出了一种裂尖邻域杂交元模型,将其与标准杂交应力元结合来求解压电材料裂纹尖 端的奇性电弹场和断裂参数的数值解．裂纹尖端杂交元的建立步骤为：1) 利用高次内插有限元特征法求解特征问题,得到反映裂尖奇异性电弹场状况的特 征值和特征角分布函数;2) 利用广义Hellinger-Reissner变分泛函以及特征问题的解来建立裂尖邻域杂交元模型．该 方法求解电弹场时,摒弃了传统有限元方法中裂尖奇异性场需要借助解析解的做法,也避免 了单纯有限元方法中需要在裂尖端部进行高密度单元划分．采用PZT5板中心裂纹问题 作为考核例,数值结果显示了良好的精确性．作为进一步应用,求解了含中心界面裂纹 的PZT4-PZT5两相压电材料的应力强度因子和电位移强度因子．所有的算例都考虑 了3种裂纹面电边界条件．     

The 7th International Conference on Fluid Mechanics May 24-27,2015,Qingdao,China

正http://www.icfm7.org First Announcement and Call for PapersThe objective of International Conference on Fluid Mechanics(ICFM)is to provide a forum for researchers to exchange new ideas and recent advances in the fields of theoretical,experimental,computational Fluid Mechanics as well as interdisciplinary subjects.It was successfully convened by the Chinese Society of Theoretical and Applied Mechanics(CSTAM)in Beijing(1987,     

INFORMATION FOR CONTRIBUTORS

Contributions： The Journal, Acta Mechanica Solida Sinica, is pleased to receive papers from engineers and scientists working in various aspects of solid mechanics. All contributions are subject to critical review prior to acceptance and publication.     

Preface

This special issue of PARTICUOLOGY is devoted to the first UK-China Particle Technology Forum taking place in Leeds, UK, on 1-3 April 2007. The forum was initiated by a number of UK and Chinese leading academics and organised by the University of Leeds in collaboration with Chinese Society of Particuology, Particle Technology Subject Group （PTSG） of the Institution of Chemical Engineers （IChemE）, Particle Characterisation Interest Group （PCIG） of the Royal Society of Chemistry （RSC） and International Fine Particle Research Institute （IFPRI）. The forum was supported financially by the Engineering and Physics Sciences Research Council （EPSRC） of United Kingdom,     

基于鲁棒滤波的捷联导引头视线角速度估计方法

针对捷联导引头无法直接获取视线角速度等信息的问题,研究了鲁棒滤波在大气层外飞行器捷联导引头视线角速度估计中的应用。为了建立非线性滤波估计模型,考虑目标视线角速度的慢变特性,采用一阶马尔科夫模型建立了状态方程;推导了视线角速度的解耦模型,并建立了量测方程;考虑到实际应用中存在系统噪声统计特性失准的问题,基于Huber-Based鲁棒滤波方法,设计了视线角速度滤波器,并完成了基于Huber-Based滤波方法和扩展卡尔曼滤波方法的数学仿真。仿真结果表明Huber-Based滤波方法的视线角、视线角速度及视线角加速度估计精度分别达到0.1140'、0.1423'/s、0.0203'/s2,而扩展卡尔曼滤波方法的视线角、视线角速度及视线角加速度估计精度仅分别为0.6577'、0.6415'/s、0.0979'/s~2。仿真结果证明了该方法可以有效地估计出相对视线角速度等信息,并且在非高斯噪声的条件下,依然可获得较高的估计精度,具有一定的鲁棒性。     

Guide for authors

正Each of the sections below provides essential information for authors.We recommend that you take the time to read them before submitting a contribution to Acta Mechanica Sinica.We hope our guide to authors may help you navigate to the appropriate section.How to prepare a submission This document provides an outline of the editorial process involved in publishing a scientific paper in Acta Mechanica     

Use specification of multiscale materials for life spanned over macro-, micro-, nano-, and pico-scale

Multiscale material intends to enhance the strength and life of mechanical systems by matching the transmitted spatiotemporal energy distribution to the constituents at the different scale, say—macro, micro, nano, and pico,—, depending on the needs. Lower scale entities are, particularly, critical to small size systems. Large structures are less sensitive to microscopic effects. Scale shifting laws will be developed for relating test data from nano-, micro-, and macro-specimens. The benefit of reinforcement at the lower scale constituents needs to be justified at the macroscopic scale. Filling the void and space in regions of high energy density is considered.Material inhomogeneity interacts with specimen size. Their combined effect is non-equilibrium. Energy exchange between the environment and specimen becomes increasingly more significant as the specimen size is reduced. Perturbation of the operational conditions can further aggravate the situation. Scale transitional functions and/or f_j/j+1 are introduced to quantify these characteristics. They are represented, respectively, by , and (f_mi/ma,f_na/mi,f_pi/na). The abbreviations pi, na, mi, and ma refer to pico, nano, micro and macro.Local damage is assumed to initiate at a small scale, grows to a larger scale, and terminate at an even larger scale. The mechanism of energy absorption and dissipation will be introduced to develop a consistent book keeping system. Compaction of mass density for constituents of size 10⁻¹², 10⁻⁹, 10⁻⁶, 10⁻³ m, will be considered. Energy dissipation at all scales must be accounted for. Dissipations at the smaller scale must not only be included but they must abide by the same physical and mathematical interpretation, in order to avoid inconsistencies when making connections with those at the larger scale where dissipations are eminent.Three fundamental Problems I, II, and III are stated. They correspond to the commonly used service conditions. Reference is made to a Representative Tip (RT), the location where energy absorption and dissipation takes place. The RT can be a crack tip or a particle. At the larger size scales, RT can refer to a region. Scale shifting of results from the very small to the very large is needed to identify the benefit of using multiscale materials.