RuH2(CO)(PPh3)3-catalyzed arylation of aromatic esters using arylboronates via C-H bond cleavages

The RuH₂(CO)(PPh₃)₃-catalyzed C-H functionalization of aromatic esters with 5,5-dimethyl-2-aryl-[1,3,2]dioxaborinanes (arylboronates) gave the ortho arylation products. This coupling reaction can be performed with various combinations of isopropyl benzoate derivatives and arylboronates. Introduction of CF₃ group in the aromatic ring increased the reactivity of the esters. Pinacolone effectively served as an acceptor of a hydride generated by C-H bond cleavage, and the amount of pinacolone used also affected the yield of the arylation product.     

A ruthenium-catalyzed reaction of aromatic ketones with arylboronates: a new method for the arylation of aromatic compounds via C-H bond cleavage

The ruthenium-catalyzed reaction of aromatic ketones with arylboronic acid esters (arylboronates) gave the ortho arylation product. For this coupling reaction, a RuH2(CO)(PPh3)3 complex exhibited the highest catalytic activity among the complexes screened. Several aromatic ketones, for example, acetophenones, acetonaphthone, alpha-tetralone, and benzosuberone, can be used in this coupling reaction. A variety of arylboronates containing electron-donating (OMe and NMe2) and -withdrawing (F and CF3) groups were found to react with aromatic ketones to give the corresponding aylation products. The corresponding arylboronic acids could be used in this coupling reaction, but the yields were slightly lower, as compared to those of the reaction using the corresponding arylboronates.     

Ruthenium-catalyzed functionalization of aryl carbon-oxygen bonds in aromatic ethers with organoboron compounds

The ruthenium-catalyzed reaction of aryl ethers having a carbonyl group at the ortho position to the ether group with organoboronates (R-B(OCH2CMe2CH2O), R = aryl, alkenyl, and alkyl) resulted in site-selective C-C bond formation. Among the transition metal complexes screened, the RuH2(CO)(PPh3)3 complex showed the highest activity. Several aromatic ketones having methoxy or phenoxy groups at the ortho position can also be used in this coupling reaction. A variety of arylboronates containing electron-donating (NMe2, OMe, methyl, and vinyl) and -withdrawing (F and CF3) groups reacted with methoxy ketones to give the corresponding coupling products in high yields.     

Reductive Amination of Aldehydes and Ketones with Sodium Triacetoxyborohydride. Studies on Direct and Indirect Reductive Amination Procedures(1)

Sodium triacetoxyborohydride is presented as a general reducing agent for the reductive amination of aldehydes and ketones. Procedures for using this mild and selective reagent have been developed for a wide variety of substrates. The scope of the reaction includes aliphatic acyclic and cyclic ketones, aliphatic and aromatic aldehydes, and primary and secondary amines including a variety of weakly basic and nonbasic amines. Limitations include reactions with aromatic and unsaturated ketones and some sterically hindered ketones and amines. 1,2-Dichloroethane (DCE) is the preferred reaction solvent, but reactions can also be carried out in tetrahydrofuran (THF) and occasionally in acetonitrile. Acetic acid may be used as catalyst with ketone reactions, but it is generally not needed with aldehydes. The procedure is carried out effectively in the presence of acid sensitive functional groups such as acetals and ketals; it can also be carried out in the presence of reducible functional groups such as C-C multiple bonds and cyano and nitro groups. Reactions are generally faster in DCE than in THF, and in both solvents, reactions are faster in the presence of AcOH. In comparison with other reductive amination procedures such as NaBH(3)CN/MeOH, borane-pyridine, and catalytic hydrogenation, NaBH(OAc)(3) gave consistently higher yields and fewer side products. In the reductive amination of some aldehydes with primary amines where dialkylation is a problem we adopted a stepwise procedure involving imine formation in MeOH followed by reduction with NaBH(4).     

Copper and Bismuth Complexes Containing Dipyridyl gem-Diolato Ligands: Bi(III)(2)[(2-Py)(2)CO(OH)](2)(O(2)CCF(3))(4)(THF)(2), Cu(II)[(2-Py)(2)CO(OH)](2)(HO(2)CCH(3))(2), and Cu(II)(4)[(2-Py)(2)CO(OH)](2)(O(2)CCH(3))(6)(H(2)O)(2), a Ferromagnetically Coupled Tetranuclear Copper(II) Chain

The reactions of the singly deprotonated di-2-pyridylmethanediol ligand (dpmdH(-)) with copper(II) and bismuth(III) have been investigated. A new dinuclear bismuth(III) complex Bi(2)(dpmdH)(2)(O(2)CCF(3))(4)(THF)(2), 1, has been obtained by the reaction of BiPh(3) with di-2-pyridyl ketone in the presence of HO(2)CCF(3) in tetrahydrofuran (THF). The reaction of Cu(OCH(3))(2) with di-2-pyridyl ketone, H(2)O, and acetic acid in a 1:2:2:2 ratio yielded a mononuclear complex Cu[(2-Py)(2)CO(OH)](2)(HO(2)CCH(3))(2), 2, while the reaction of Cu(OAC)(2)(H(2)O) with di-2-pyridyl ketone and acetic acid in a 2:1:1 ratio yielded a tetranuclear complex Cu(4)[(2-Py)(2)CO(OH)](2)(O(2)CCH(3))(6)(H(2)O)(2), 3. The structures of these complexes were determined by single-crystal X-ray diffraction analyses. Three different bonding modes of the dpmdH(-) ligand were observed in compounds 1-3. In 2, the dpmdH(-) ligand functions as a tridentate chelate to the copper center and forms a hydrogen bond between the OH group and the noncoordinating HO(2)CCH(3) molecule. In 1 and 3, the dpmdH(-) ligand functions as a bridging ligand to two metal centers through the oxygen atom. The two pyridyl groups of the dpmdH(-) ligand are bound to one bismuth(III) center in 1, while in 3 they are bound two copper(II) centers, respectively. Compound 3 has an unusual one dimensional hydrogen bonded extended structure. The intramolecular magnetic interaction in 3 has been found to be dominated by ferromagnetism. Crystal data: 1, C(38)H(34)N(4)O(14)F(12)Bi(2), triclinic P&onemacr;, a = 11.764(3) ?, b = 11.949(3) ?, c = 9.737(1) ?, alpha =101.36(2) degrees, beta = 105.64(2) degrees, gamma = 63.79(2) degrees, Z = 1; 2, C(26)H(26)N(4)O(8)Cu/CH(2)Cl(2), monoclinic C2/c, a = 25.51(3) ?, b = 7.861(7) ?, c = 16.24(2) ?, beta = 113.08(9) degrees, Z = 4; 3, C(34)H(40)N(4)O(18)Cu(4)/CH(2)Cl(2), triclinic P&onemacr;, a = 10.494(2) ?, b = 13.885(2) ?, c = 7.900(4) ?, alpha =106.52(2) degrees, beta = 90.85(3) degrees, gamma = 94.12(1) degrees, Z = 1.     

Palladium-catalyzed tandem reactions to form 1-vinyl-1h-isochromene derivatives

The palladium-catalyzed reaction of pinacolone with tert-butyldimethyl(3-(2-bromophenyl)allyloxy)silane results in direct formation of 1-vinyl-3-tert-butyl-1H-isochromene. This is the result of a ketone arylation followed by an intramolecular cyclization of the enolate with the allylic system. The use of a lithium diamide base appears to be essential for success. The tert-butyldimethylsilyl protecting group is also an essential choice as it furnishes the appropriate reactivity to promote allylic substitution after the aryl coupling process. The use of more effective leaving groups, such as acetate, results in reaction of the allylic group, and no aryl coupling is observed. Through the appropriate selection of phosphine ligand and solvent, either the cyclized isochromene product or the noncyclized intermediate may be formed selectively. A short combinatorial study of the scope and limitations of the reaction, involving 24 ketones, is described.     

Theoretical investigation on regioselectivity of aromatic ketones in the addition with olefin catalyzed by RuH2(CO)(PPh3)3

Ab initio method is employed to study the structures of twelve aromatic ketones at HF/3-21G, HF/6-31G and HF/6-31G levels, respectively. A theoretical analysis is also carried out to study the regioselectivity and reactivity of aromatic ketones in the addition with olefin catalyzed by RuH2(CO)(PPh3)3. The results indicate that a U shape LUMO conjugation of aromatic ketones in a plane plays an important role in regioselectivity on the cleavage of p C-H bond and is a nec-essary factor to success of addition with olefin, and that sterle effect is an indispensable factor in forming additional ortho-product. Meanwhile, electronic effect may influence the rate of addition for the structures alike which only have different replacements in the same site of aromatic ring, such as furan, thiophene and pyrole. A possible catalytic reaction mechanism is proposed that the addition of C-H bond may be carried out by a coordination of aromatic ketones with Ru complex.     

Stereoselective ketone reduction by a carbonyl reductase from Sporobolomyces salmonicolor. Substrate specificity, enantioselectivity and enzyme-substrate docking studies

In our effort to search for effective carbonyl reductases, the activity and enantioselectivity of a carbonyl reductase from Sporobolomyces salmonicolor have been evaluated toward the reduction of a variety of ketones. This carbonyl reductase (SSCR) reduces a broad spectrum of ketones including aliphatic and aromatic ketones, as well as alpha- and beta-ketoesters. Among these substrates, SSCR shows highest activity for the reduction of alpha-ketoesters. Aromatic alpha-ketoesters are reduced to (S)-alpha-hydroxy esters, while (R)-enantiomers are obtained from the reduction of aliphatic counterparts. This interesting observation is consistent with enzyme-substrate docking studies, which show that hydride transfer occurs at the different faces of carbonyl group for aromatic and aliphatic alpha-ketoesters. It is worthy to note that sterically bulky ketone substrates, such as 2'-methoxyacetophenone, 1-adamantyl methyl ketone, ethyl 4,4-dimethyl-3-oxopentanoate and ethyl 3,3-dimethyl-2-oxobutanoate, are reduced to the corresponding alcohols with excellent optical purity. Thus, SSCR possesses an unusually broad substrate specificity and is especially useful for the reduction of ketones with sterically bulky substituents.     

Dual-activation protocol for tandem cross-aldol condensation: An easy and highly efficient synthesis of α,α′-bis(aryl/alkylmethylidene)ketones

Commercially available lithium hydroxide monohydrate (LiOH·H₂O) was found to be a novel ‘dual activation’ catalyst for tandem cross-aldol condensation between cyclic/acyclic ketones and aromatic/heteroaromatic/styryl/alkyl aldehydes leading to an efficient and easy synthesis of α,α′-bis(aryl/alkylmethylidene)ketones at r.t. in short times. The reaction of aryl, heteroaryl, styryl and alkyl aldehydes with acyclic and five/six-membered cyclic ketones afforded excellent yields after 2 min to 1.25 h. The reaction conditions were compatible with various electron withdrawing and electron donating substituents, e.g. Cl, F, NO₂, OMe and NMe₂. The rate of the cross-aldol condensation was influenced by the nature of the ketone and electronic and steric factors associated with the aldehyde. The reaction took place at a faster rate for acyclic ketone (e.g., acetone) than that for cyclic ketone (e.g., cyclohexanone). In case of cycloalkanones, the rate of the reaction was dependent on the size of the ring of the cycloalkanone. The cross-aldol condensation of cyclopentanone was faster than that of cyclohexanone for a common aldehyde. In case of reactions involving aliphatic aldehyde having α-hydrogen atom no self-aldol condensation of the aldehyde took place.     

Kinetics and mechanism of formation of the platinum-thallium bond: the [(CN)(5)Pt-Tl(CN)(3)](3)(-) complex

Formation kinetics of the metal-metal bonded [(CN)(5)PtTl(CN)(3)](3)(-) complex from Pt(CN)(4)(2)(-) and Tl(CN)(4)(-) has been studied in the pH range of 5-10, using standard mix-and-measure spectrophotometric technique at pH 5-8 and stopped-flow method at pH > 8. The overall order of the reaction, Pt(CN)(4)(2)(-) + Tl(CN)(4)(-) right harpoon over left harpoon [(CN)(5)PtTl(CN)(3)](3)(-), is 2 in the slightly acidic region and 3 in the alkaline region, which means first order for the two reactants in both cases and also for CN(-) at high pH. The two-term rate law corresponds to two different pathways via the Tl(CN)(3) and Tl(CN)(4)(-) complexes in acidic and alkaline solution, respectively. The two complexes are in fast equilibrium, and their actual concentration ratio is controlled by the concentration of free cyanide ion. The following expression was derived for the pseudo-first-order rate constant of the overall reaction: k(obs) = (k(1)(a)[Tl(CN)(4)(-) + (k(1)(a)/K(f)))(1/(1 + K(p)[H(+)]))[CN(-)](free) + k(1)(b)[Tl(CN)(4)(-)] + (k(1)(b)/K(f)), where k(1)(a) and k(1)(b) are the forward rate constants for the alkaline and slightly acidic paths, K(f) is the stability constant of [(CN)(5)PtTl(CN)(3)](3)(-), and K(p) is the protonation constant of cyanide ion. k(1)(a) = 143 +/- 13 M(-)(2) s(-)(1), k(1)(b) = 0.056 +/- 0.004 M(-)(1) s(-)(1), K(f) = 250 +/- 54 M(-)(1), and log K(p) = 9.15 +/- 0.05 (I = 1 M NaClO(4), T = 298 K). Two possible mechanisms were postulated for the overall reaction in both pH regions, which include a metal-metal bond formation step and the coordination of the axial cyanide ion to the platinum center. The alternative mechanisms are different in the sequence of these steps.     

Proton transfer to nickel-thiolate complexes. 2. Rate-limiting intramolecular proton transfer in the reactions of [Ni(SC(6)H(4)R-4)(PhP[CH(2)CH(2)PPh(2)](2))](+) (R = NO(2), Cl, H, Me, or MeO)

The protonation of [Ni(SC(6)H(4)R-4)(triphos)](+) (triphos = PhP[CH(2)CH(2)PPh(2)](2); R = NO(2), Cl, H, Me, or MeO) by [lutH](+) (lut = 2,6-dimethylpyridine) to form [Ni(S(H)C(6)H(4)R-4)(triphos)](2+) is an equilibrium reaction in MeCN. Kinetic studies, using stopped-flow spectrophotometry, reveal that the reactions occur by a two-step mechanism. Initially, [lutH](+) rapidly binds to the complex (K(2)(R)) in an interaction which probably involves hydrogen-bonding of the acid to the sulfur. Subsequent intramolecular proton transfer from [lutH](+) to sulfur (k(3)(R)) is slow because of both electronic and steric factors. The X-ray crystal structures of [Ni(SC(6)H(4)R-4)(triphos)](+) (R = NO(2), H, Me, or MeO) show that all are best described as square-planar complexes, with the phenyl substituents of the triphos ligand presenting an appreciable barrier to the approach of the sterically demanding [lutH](+) to the sulfur. The kinetic characteristics of the intramolecular proton transfer from [lutH](+) to sulfur have been investigated. The rate of intramolecular proton transfer exhibits a nonlinear dependence on Hammett sigma(+), with both electron-releasing and electron-withdrawing 4-R-substituents on the coordinated thiolate facilitating the rate of proton transfer (NO(2) > Cl > H > Me < MeO). The rate constants for intramolecular proton transfer correlate well with the calculated electron density of the sulfur. The temperature dependence of the rate of the intramolecular proton transfer reactions shows that deltaH() is small but increases as the 4-R-substituent becomes more electron-withdrawing [deltaH = 4.1 (MeO), 6.9 (Me), 11.4 kcal mol(-)(1) (NO(2))], while DeltaS() becomes progressively less negative [deltaS = -50.1 (MeO), -41.2 (Me), -16.4 (NO(2)) cal K(-)(1) mol(-)(1)]. Studies with [lutD](+) show that the rate of intramolecular proton transfer varies with the 4-R-substituent [(k(3)(NO)2)(H)/(k(3)(NO)2)(D) = 0.39; (k(3)(Cl))(H)/(k(3)(Cl))(D) = 0.88; (k(3)(Me))(H)/(k(3)(Me))(D) = 1.3; (k(3)(MeO))(H)/(k(3)(MeO))(D) = 1.2].     

Ruthenium-Lewis acid catalyzed asymmetric Diels-Alder reactions between dienes and alpha,beta-unsaturated ketones

The complex [Ru(Cp)(R,R-BIPHOP-F)(acetone)][SbF(6)], (R,R)-1 a, was used as catalyst for asymmetric Diels-Alder reactions between dienes (cyclopentadiene, methylcyclopentadiene, isoprene, 2,3-dimethylbutadiene) and alpha,beta-unsaturated ketones (methyl vinyl ketone (MVK), ethyl vinyl ketone, divinyl ketone, alpha-bromovinyl methyl ketone and alpha-chlorovinyl methyl ketone). The cycloaddition products were obtained in yields of 50-90 % and with enantioselectivities up to 96 % ee. Ethyl vinyl ketone, divinyl ketone and the halogenated vinyl ketones worked best and their reactions with acyclic dienes consistently provided products with >90 % ee. alpha-Chlorovinyl methyl ketone performed better than alpha-bromovinyl methyl ketone. The reaction also provided a [4.3.1]bicyclic ring system in 95 % ee through an intramolecular cycloaddition reaction. Crystal structure determinations of [Ru(Cp)((S,S)-BIPHOP-F)(mvk)][SbF(6)], (S,S)-1 b, and [Ru(Cp)((R,R)-Me(4)BIPHOP-F)(acrolein)][SbF(6)], (R,R)-2 b, provided the basis for a rationalization of the asymmetric induction.     

Reactions of 2,2-dimethyl-3-phenylazirine with hydrazine and its derivatives

The corresponding -amino ketone hydrazones were obtained by reaction of 2,2-dimethyl-3-phenylazirine with hydrazine, N,N-dimethylhydrazine, methylhydrazine, and semicarbazide. It was established that unsymmetrical azines are formed in the reaction of 2-amino-2-methyl-1-phenyl-1-propanone hydrazone with aliphatic and cyclic ketones. The corresponding tetrahydro-1,2,4-triazines were obtained in the case of the analogous reaction with aliphatic and aromatic aldehydes.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 342–346, March, 1978.     

Radical nucleophilic substitution of 2-(4-halophenyl)-2-methyl-1-chloropropane with enolate ions of ketones

The photoinitiated reaction of 2-(4-halophenyl)-2-methyl-1-chloropropane 2a,b (halogen=Br, I, respectively) with the anions of pinacolone (3a) and acetophenone (3b) either in DMSO or in liquid ammonia are reported. In DMSO, the main reaction is the SRN1 nucleophilic substitution at the aromatic (Csp2-halogen) center with substitution or reduction at the aliphatic (Csp3-Cl) one. In liquid ammonia, the main reaction is substitution at the aromatic C-halogen site. This difference in product distribution is ascribed to modifications in the rate constant of Csp3-Cl dissociation of the radical anions proposed as intermediates in going from DMSO (rt) to liquid NH3 (-33 degrees C).     

Catalytic asymmetric borylative aldol reaction of 5,6-dihydro-2H-pyran-2-one and ketones

A copper(I)-catalyzed asymmetric borylative aldol reaction of 5,6-dihydro-2H-pyran-2-one and simple ketones (including aromatic ketones and an aliphatic ketone) was disclosed, which afforded a series of chiral diols after an oxidative work-up in moderate yields with moderate to high diastereoselectivity and excellent enantioselectivity. The lactone moiety was easily opened with methanol to generate a chiral triol in moderate yield.     

Indium-mediated asymmetric Barbier-type propargylations: additions to aldehydes and ketones and mechanistic investigation of the organoindium reagents

We report a simple, efficient, and general method for the indium-mediated enantioselective propargylation of aromatic and aliphatic aldehydes under Barbier-type conditions in a one-pot synthesis affording the corresponding chiral alcohol products in very good yield (up to 90%) and enantiomeric excess (up to 95%). The extension of this methodology to ketones demonstrated the need for electrophilic ketones more reactive than acetophenone as the reaction would not proceed with just acetophenone. Using the Lewis acid indium triflate [In(OTf)(3)] induced regioselective formation of the corresponding homoallenic alcohol product from acetophenone. However, this methodology demonstrated excellent chemoselectivity in formation of only the corresponding secondary homopropargylic alcohol product in the presence of a ketone functionality. Investigation of the organoindium intermediates under our reaction conditions shows the formation of allenylindium species, and we suggest that these species contain an indium(III) center. In addition, we have observed the presence of a shiny, indium(0) nugget throughout the reaction, irrespective of the stoichiometry, indicating disproportionation of indium halide byproduct formed during the reaction.     

3+2] cycloadditions of aryl cyclopropyl ketones by visible light photocatalysis

We report a new method for the formal [3+2] reaction of aryl cyclopropyl ketones with olefins to generate highly substituted cyclopentane ring systems. The key initiation step in this process is the one-electron reduction of the ketone to the corresponding radical anion, which is accomplished using a photocatalytic system comprising Ru(bpy)(3)(2+), La(OTf)(3), and TMEDA.     

Polyfluorinated Tris(pyrazolyl)borates. Syntheses and Spectroscopic and Structural Characterization of Group 1 and Group 11 Metal Complexes of [HB(3,5-(CF(3))(2)Pz)(3)](-) and [HB(3-(CF(3))Pz)(3)](-)

The fluorinated tris(pyrazolyl)borate ligands [HB(3,5-(CF(3))(2)Pz)(3)](-) and [HB(3-(CF(3))Pz)(3)](-) (where Pz = pyrazolyl) have been synthesized as their sodium salts from the corresponding pyrazoles and NaBH(4) in high yield. These sodium complexes and the related [HB(3,5-(CF(3))(2)Pz)(3)]K(DMAC) were used as ligand transfer agents in the preparation of the copper and silver complexes [HB(3,5-(CF(3))(2)Pz)(3)]Cu(DMAC), [HB(3,5-(CF(3))(2)Pz)(3)]CuPPh(3), [HB(3,5-(CF(3))(2)Pz)(3)]AgPPh(3), and [HB(3-(CF(3))Pz)(3)]AgPPh(3). Metal complexes of the fluorinated [HB(3,5-(CF(3))(2)Pz)(3)](-) ligand have highly electrophilic metal sites relative to their hydrocarbon analogs. This is evident from the formation of stable adducts with neutral oxygen donors such as H(2)O, dimethylacetamide, or thf. Furthermore, the metal compounds derived from fluorinated ligands show fairly long-range coupling between fluorines of the trifluoromethyl groups and the hydrogen, silver, or phosphorus. The solid state structures show that the fluorines are in close proximity to these nuclei, thus suggesting a possible through-space coupling mechanism. Crystal structures of the sodium adducts exhibit significant metal-fluorine interactions. The treatment of [HB(3,5-(CF(3))(2)Pz)(3)]Na(H(2)O) with Et(4)NBr led to [Et(4)N][HB(3,5-(CF(3))(2)Pz)(3)], which contains a well-separated [Et(4)N](+) cation and the [HB(3,5-(CF(3))(2)Pz)(3)](-) anion in the solid state. Crystal data with Mo Kalpha (lambda = 0.710 73 ?) at 193 K: [HB(3,5-(CF(3))(2)Pz)(3)]Na(H(2)O), C(15)H(6)BF(18)N(6)NaO, a = 7.992(2) ?, b = 15.049(2) ?, c = 9.934(2) ?, beta = 101.16(2) degrees, monoclinic, P2(1)/m, Z = 2; [{HB(3-(CF(3))Pz)(3)}Na(thf)](2), C(32)H(30)B(2)F(18)N(12)Na(2)O(2), a = 9.063(3) ?, b = 10.183(2) ?, c = 12.129(2) ?, alpha = 94.61(1) degrees, beta = 101.16(2) degrees, gamma = 95.66(2) degrees, triclinic, &Pmacr;1, Z = 1; [HB(3,5-(CF(3))(2)Pz)(3)]Cu(DMAC), C(19)H(13)BCuF(18)N(7)O, a = 15.124(4) ?, b = 8.833(2) ?, c = 21.637(6) ?, beta = 105.291(14) degrees, monoclinic, P2(1)/n, Z = 4; [HB(3,5-(CF(3))(2)Pz)(3)]CuPPh(3), C(33)H(19)BCuF(18)N(6)P, a = 9.1671(8) ?, b = 14.908(2) ?, c = 26.764(3) ?, beta = 94.891(1) degrees, monoclinic, P2(1)/c, Z = 4; [HB(3,5-(CF(3))(2)Pz)(3)]AgPPh(3).0.5C(6)H(14), C(36)H(26)AgBF(18)N(6)P, a = 13.929(2) ?, b = 16.498(2) ?, c = 18.752(2) ?, beta = 111.439(6) degrees, monoclinic, P2(1)/c, Z = 4; [Et(4)N][HB(3,5-(CF(3))(2)Pz)(3)], C(23)H(24)BF(18)N(7), a = 10.155(2) ?, b = 18.580(4) ?, c = 16.875(5) ?, beta = 99.01(2) degrees, monoclinic, P2(1)/n, Z = 4.     

Rhodium‐Catalyzed Annelation of Benzoic Acids with α,β‐Unsaturated Ketones with Cleavage of C−H,CO−OH,and C−C Bonds

In the presence of a [Cp*RhCl₂]₂ catalyst, the Lewis acid In(OTf)₃, and the mild base Na₂CO₃, aromatic carboxylates and α,β‐unsaturated ketones undergo a unique hydroarylation/Claisen/retro‐Claisen process to give the corresponding indanones. In this carboxylate‐directed ortho‐C?H annelation, the C?COR bond of the ketone and the CO?OH group of the aromatic carboxylate are cleaved, and the hydroxy group is transferred from the aromatic to the aliphatic acyl residue. This reactivity is synthetically useful, particularly when starting from cyclic ketones, which are converted into indanones bearing aliphatic carboxylate side chains, thus greatly increasing the molecular complexity of aromatic carboxylates in a single step.     

Kinetics and mechanism of ketone enolization mediated by magnesium bis(hexamethyldisilazide)

Magnesium bis(hexamethyldisilazide), Mg(HMDS)(2), reacts with substoichiometric amounts of propiophenone in toluene solution at ambient temperature to form a 74:26 mixture of the enolates (E)- and (Z)-[(HMDS)(2)Mg(2)(mu-HMDS){mu-OC(Ph)=CHCH(3)}], (E)-1 and (Z)-1, which contain a pair of three-coordinate metal centers bridged by an amide and an enolate group. The compositions of (E)-1 and (Z)-1 were confirmed by solution NMR studies and also by crystallographic characterization in the solid state. Rate studies using UV-vis spectroscopy reveal the rapid and complete formation of a reaction intermediate, 2, between the ketone and magnesium, which undergoes first-order decay with rate constants independent of the concentration of excess Mg(HMDS)(2) (DeltaH++ = 17.2 +/- 0.8 kcal/mol, DeltaS++ = -11 +/- 3 cal/mol.K). The intermediate 2 has been characterized by low-temperature (1)H NMR, diffusion-ordered NMR, and IR spectroscopy and investigated by computational studies, all of which are consistent with the formulation of 2 as a three-coordinate monomer, (HMDS)(2)Mg{eta(1)-O=C(Ph)CH(2)CH(3)}. Further support for this structure is provided by the synthesis and structural characterization of two model ketone complexes, (HMDS)(2)Mg(eta(1)-O=C(t)Bu(2)) (3) and (HMDS)(2)Mg{eta(1)-O=C((t)Bu)Ph} (4). A large primary deuterium isotope effect (k(H)/k(D) = 18.9 at 295 K) indicates that proton transfer is the rate-limiting step of the reaction. The isotope effect displays a strong temperature dependence, indicative of tunneling. In combination, these data support the mechanism of enolization proceeding through the single intermediate 2 via intramolecular proton transfer from the alpha carbon of the bound ketone to the nitrogen of a bound hexamethyldisilazide.