Poly(pyrazolyl)aluminate complexes containing aluminum-hydrogen bonds

The treatment of LiAlH(4) with 2, 3, or 4 equiv of the 3,5-disubstituted pyrazoles Ph(2)pzH or iPr(2)pzH afforded [Li(THF)(2)][AlH(2)(Ph(2)pz)(2)] (97%), [Li(THF)][AlH(Ph(2)pz)(3)] (96%), [Li(THF)(4)][Al(Ph(2)pz)(4)] (95%), and [Li(THF)][AlH(iPr(2)pz)(3)] (89%). The treatment of ZnCl(2) with [Li(THF)][AlH(Ph(2)pz)(3)] afforded Zn(AlH(Ph(2)Pz)(3))H (70%). X-ray crystal structures of these complexes demonstrated κ(2) or κ(3) coordination of the aluminum-based ligands to the Li or Zn ions. The treatment of [Li(THF)][AlH(Ph(2)pz)(3)] with MgBr(2) or CoCl(2) in THF/Et(2)O solutions, by contrast, afforded the pyrazolate transfer products Mg(2)Br(2)(Ph(2)pz)(2)(THF)(3)·2THF (25%) and Co(2)Cl(2)(Ph(2)pz)(2)(THF)(3)·THF (23%) as colorless and blue crystalline solids, respectively. An analogous treatment of [Li(THF)][AlH(Ph(2)pz)(3)] with MCl(2) (M = Mn, Fe, Ni, Cu) afforded metal powders and H(2), illustrating hydride transfer from Al to M as a competing reaction path.     

1,3-Digermacyclobutanes with exocyclic C=P and C=P=S double bonds

New 1,3-digermacyclobutanes, with two exocyclic C=PMes* bonds, and the corresponding first bis(methylenethioxo)phosphoranes with C=P(S)Mes* moieties have been synthesized.     

Formation of molecular templates containing cumulative double bonds (C=C=C) at organic/silicon hybrid interfaces

The cumulative double bond (C=C=C), an important intermediate in synthetic organic chemistry, was successfully prepared via the selective attachment of acetylethyne to Si(111)-7 x 7. The experimental observation of the characteristic vibrational modes and electronic structures of the C=C=C group in the surface species demonstrates the [4 + 2]-like cycloaddition occurring between the terminal O and C atoms of acetylethyne and the neighboring Si adatom-rest atom pair, consistent with the prediction of density functional theory calculations. Scanning tunneling microscopy images further reveal that the molecules selectively bind to the adjacent adatom-rest atom pairs on Si(111)-7 x 7.     

Quantum-chemical study of manifestations of conjugation in molecules containing conjugated C=C and C=O bonds

Based on the MNDO calculations of the electronic structure of the molecules of acrolein, glyoxal, and butadiene, possible mechanisms of the conjugation in systems containing conjugated C=C and C=O bonds have been analyzed. In the electronic ground state ofs-trans-acrolein, the , -conjugation is very small, whereas in the first excited electronic state, the conjugation is substantial, In the ground state ofs-trans-glyoxal, the ,-conjugation should manifest itself clearly but should be weaker than in butadiene, whereas in the first excited electronic state, this conjugation should be more pronounced, Alternation of double and single bonds in the classic structural formula of a molecule does not ensure that this molecule exhibits the properties of a -conjugated system even in planar conformations.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1648–1652, July, 1996.     

Synthesis and study of block copolycondensates containing polysiloxane and unsaturated polyester blocks in the chain. I. Poly(unsaturated esters-b-siloxanes) with blocks linked by Si?O?C bonds

Block copolycondensates containing both unsaturated polyester and polysiloxane blocks have been prepared by copolycondensation of reactive oligomers; the bonds between the blocks are either Si? O? C or Si? C. This article is devoted to poly(ethylene adipate-co-maleate-b-siloxane) with Si? O? C bonds. The reactive oligomers are studied, before or after modification, by tonometry, end-group titration, GPC, and NMR. Contrary to the block copolycondensates of the same kind described in the literature, those reported in this work have high molecular weights (five block of each kind). These high-molecular-weight block polycondensates have been obtained by a careful study of the parameters of the polycondensation.     

Synthesis and study of block copolycondensates containing polysiloxane and unsaturated polyester blocks in the chain. II. Poly(unsaturated esters-b-siloxanes) with blocks linked by Si?C bonds and poly(butadienes-b-siloxanes)

Poly(unsaturated esters-b-siloxanes) whose blocks are linked by Si? C bonds and poly(butadienes-b-siloxanes) have been obtained by polycondensation of ω,ω′-diepoxy polydimethylsiloxanes and ω,ω′-dicarboxylic poly(unsaturated esters). The reaction between polysiloxanes with Si? H end groups and allylepoxy has been studied; the resulting ω,ω-diepoxy polysiloxanes have the expected structure. The polycondensation of oligomers with, respectively, epoxy and carboxylic end groups has been studied and the optimal conditions established. The samples with Si? C bonds are not affected by hydrolysis in pure water. The poly(siloxanes-b-unsaturated esters) can be cured by UV light.     

丁二烯-丙烯腈共聚物碳-碳双键的选择性加氢

丁二烯－丙烯腈共聚物碳－碳双键的选择性加氢张邦华,王光,周庆业,郝广杰,宋谋道,张莹（南开大学高分子化学研究所,天津,３０００７１）关键词丁二烯－丙烯腈共聚物,氯化三苯基膦铑,均相催化,选择性加氢通过催化加氢对不饱和高聚物进行化学改性是提高大分子的物...     

Synthesis of polyesters containing acetylenic bonds in the chain

Summary By joint oxidative dehydropolycondensation of p-diethynylbenzene and dipropargyl esters, polymers have been obtained that contain triple bonds alternating with ester groups.     

Dry synthesis of triple cumulative double bonds (C=C=C=N) on Si(111)-7 x 7 surfaces

The interactions of cyanoacetylene and diacetylene with a Si(111)-7 x 7 surface have been studied as model systems to mechanistically understand the chemical binding of unsaturated organic molecules to diradical-like silicon dangling bonds. Vibrational studies show that cyanoacetylene mainly binds to the surface through a diradical reaction involving both cyano and C[triple bond]C groups with an adjacent adatom-rest atom pair at 110 K, resulting in an intermediate containing triple cumulative double bonds (C=C=C=N). On the other hand, diacetylene was shown to the covalently attached to Si(111)-7 x 7 only through one of its C[triple bond]C groups, forming an enynic-like structure with a C=C-C[triple bond]C skeleton. These chemisorbed species containing triple cumulative double bonds (C=C=C=N) and C=C-C[triple bond]C may be employed as precursors (or templates) for further construction of bilayer organic films on the semiconductor surfaces.     

丁二烯-b-甲基丙烯酸甲酯共聚物中C＝C的选择性催化加氢

以氯化三苯基膦铑为催化剂,对丁二烯-b-甲基丙烯酸甲酯共聚物的催化加氢反应进行了研究,用NMR、FTIR、动态粘弹谱和化学分析法对加氢产物进行了表征。证明RhCl[P(C₆H₅)₃]₃可有效地使共聚物中的C＝C加氢,且具有很高的选择性,未加氢的双键含量小于0.71%.     

New poly(amidoamine)s containing disulfide linkages in their main chain

Novel poly(amidoamine)s (PAAs) containing disulfide linkages regularly arranged along their backbones were synthesized by the stepwise polyaddition of 2‐methylpiperazine to N,N′‐bis(acryloyl)cystamine (BACy1) or N,N′‐bis(acryloyl)‐(L )‐cystine (BACy2). Both bisacrylamides had, in turn, been obtained by the reaction of acryloyl chloride with the corresponding amines. All the products were characterized with ¹H and ¹³C NMR spectroscopy, and the average molecular weights of the polymers were determined by size exclusion chromatography. Both PAAs showed different solubility properties. In particular, PAA‐Cy1, derived from BACy1, was sparingly soluble in water, whereas PAA‐Cy2, derived from BACy2, was very soluble in aqueous media. The polymerization rates were investigated with ¹H NMR spectroscopy. In both cases, the experimental data were consistent with pseudo‐second‐order kinetics. The calculated kinetic constants were 5.96 × 10^?3 and 5.90 × 10^?2 min^?1 L mol^?1 for the polyaddition of BACy1 and BACy2, respectively. The observed hydrolytic degradation rate of PAA‐Cy2 in a pH 7.4 tris(hydroxymethyl)aminomethane (TRIS) buffer was comparable to that of conventional amphoteric PAAs, that is, PAAs containing carboxyl groups in their repeating unit. Degradation experiments carried out in the presence of 2‐mercaptoethanol with both PAAs demonstrated that the disulfide groups contained in its repeating units were susceptible to reductive cleavage in the presence of thiols. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1404–1416, 2005     

Dienophilic behavior of the vinylic (C=C) and the carbonyl (C=O) bonds of ketenes in reactions with 1,3-diazabuta-1,3-dienes

[reaction: see text] Ab initio and density functional studies (DFT) on cycloaddition reactions of 1,3-diazabuta-1,3-dienes with ketenes are reported. The vinylic (C=C) and the carbonyl (C=O) units of the ketenes are found to participate in concerted asynchronous [4 + 2] cycloaddition reactions. The transition states (3t, 4t, and 7t) for these paths have been located on the PE surface at the correlated levels of ab initio calculations. A reasonable mechanism for the formation of [4 + 2] and [2 + 2] adducts is presented.     

New rigid-rod poly(benzoxazole-imide)s containing chloro-substituted p-phenylene units in the main chain

A series of new poly(o-hydroxy amide-imide)s with high molecular weights were synthesized by low-temperature solution polycondensation from a preformed imide ring and chloro- or dichloro-substituted p-phenylene-containing diacid chlorides of 2,5-bis(trimellitimido)chlorobenzene or 1,4-bis(trimellitimido)-2,5-dichlorobenzene and three bis(o-amino phenol)s. All the poly(o-hydroxy amide-imide)s were readily soluble in a variety of organic solvents such as N-methyl-2-pyrrolidone and N,N-dimethylacetamide. Transparent and flexible films of these polymers were cast from their solutions. The cast films had tensile strengths ranging from 88 to 102 MPa and elongations at break of 8–12%. Subsequent thermal cyclodehydration of the poly(o-hydroxy amide-imide)s afforded novel poly(benzoxazole-imide)s. The poly(benzoxazole-imide)s exhibited glass-transition temperatures in the range of 310–338 °C and were stable up to 500 °C in nitrogen, with 10% weight-loss temperatures recorded between 550 and 570 °C in nitrogen. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4151–4158, 1999     

Rigid‐chain metallomesogenic polymers containing vanadyl or copper(II) ions coordinated in the main chain

Rigid‐chain metallomesogenic polymers containing Cu(II) or VO(II) were prepared and characterized. All the polymers were soluble and melted without decomposition. They showed a thermotropic liquid–crystal (LC) behavior, and the mesophases were invariably preserved for a long time at room temperature in a metastable condition, with respect to the semicrystalline state. The nature of the mesophases of the Cu(II)‐containing polymers was similar to that observed in analogous organic rigid‐chain polymers having long lateral alkyl chains packed as extended ribbons. The VO(II)‐containing polymers showed an LC polymorphism involving a smectic A and a nematic phase. For all the polymers in a smectic or smecticlike state at room temperature, X‐ray diffraction data suggested short mean distances among the metal ions arranged in layers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2342–2349, 2001     

Boron-pnictogen multiple bonds: donor-stabilized P=B and As=B bonds and a hindered iminoborane with a B-N triple bond

Reaction of the hindered phosphino- and arsinoboranes, Ar*Pn(H)-B(Br)Tmp (Ar* = -C6H3-2,6-(C6H2-2,4,6-iPr3)2; Tmp = 2,2,6,6-tetramethylpiperidino; Pn = P and As, 1 and 3, respectively) with 4-dimethylaminopyridine, DMAP, afforded the boranylidenephosphane and arsane, Ar*Pn=B(DMAP)Tmp (Pn = P and As, 2 and 4) as deep red-purple solids. The analogous aminoboranes Ar'N(H)-B(X)Tmp (Ar' = -C6H3-2,6-(C6H2-2,4,6-Me3)2; X = Cl and Br; 5 and 6) did not display any reactivity with DMAP, but in the presence of the amide base, Na[N(SiMe3)2], the clean formation of the uncomplexed iminoborane Ar'NBTmp (7) was observed. Attempts to generate an Sb=B bond were unsuccessful, as the required stibinoborane precursor, Ar*Sb(H)-B(Br)Tmp, could not be prepared; in place of clean Sb-B bond formation, the reduced product Ar*Sb=SbAr* was obtained. All compounds were characterized spectroscopically, and the X-ray crystal structures of 1, 2, 4, 6, and 7 were determined.     

Studies of poly-yne polymers containing transition metals in the main chain : III. Synthesis and characterization of a poly-yne polymer containing mixed metals in the main chain,

By the reaction of trans-(PBu₃)₂Pt(CCCCH)₂ with trans-(PBu₃)₂PdCl₂, the title polymer,

(II), has been prepared and characterized by spectral and analytical data. The alternating regularity of the metal arrangement in II was confirmed by the selective formation of the trinuclear complex trans,trans,trans-ClPd(PBu₃)₂?CCC CPt(PBu₃)₂?CC-CCPd(PBu₃)₂(XXIII), in the depolymerization by trans- (PBu₃)₂PdCl₂ using CuI as catalyst in XXNEt₂.     

Conjugated polymers containing phenothiazine moieties in the main chain

Several conjugated polymers containing phenothiazine moieties in the main chain were synthesized by Knovenagel or Wittig condensations. The polymers were identified and characterized by ¹H‐NMR, IR, gel permeation chromatography (GPC), thermogravimetric analysis (TGA), UV‐vis and fluorescent (FL) spectra. Results indicated that the m‐polymer, which was prepared from the polycondensation of N‐octyl‐3,7‐diformylphenothiazine with m‐phenylene diacetonitrile, is the most thermally stable one in all the polymers synthesized. While, the p‐polymer, which was prepared from the polycondensation of N‐octyl‐3,7‐diformylphenothiazine with p‐phenylene diacetonitrile, is the most thermally instable one. The introduction of a cyano group made the absorption and emissive maxima red‐shift from 429 and 537 nm for the Ph‐polymer to 465 and 597 nm for the p‐polymer respectively. The quinoid structure formation allows the p‐polymer to have a lower band gap than any other polymers. Emissive spectra of all these polymers in tetrahydrofuran (THF) solution have a narrow half‐peak width. Copyright © 2006 John Wiley & Sons, Ltd.