Dynamic double lattice of 1-adamantaneselenolate self-assembled monolayers on Au{111}

We report a complex, dynamic double lattice for 1-adamantaneselenolate monolayers on Au{111}. Two lattices coexist, revealing two different binding modes for selenols on gold: molecules at bridge sites have lower conductance than molecules at three-fold hollow sites. The monolayer is dynamic, with molecules switching reversibly between the two site-dependent conductance states. Monolayer dynamics enable adsorbed molecules to reorganize according to the underlying gold electronic structure over long distances, which facilitates emergence of the self-organized rows of dimers. The low-conductance molecules assume a (7 × 7) all-bridge configuration, similar to the analogous 1-adamantanethiolate monolayers on Au{111}. The high-conductance molecules self-organize upon mild annealing into distinctive rows of dimers with long-range order, described by a (6√5 × 6√5)R15° unit cell.     

Relative conductances of alkaneselenolate and alkanethiolate monolayers on Au{111}

The electronic properties of alkanethiolate [CH3(CH2)nS-, n = 9 and 11] and alkaneselenolate [CH3(CH2)nSe-, n = 9 and 11] self-assembled monolayers on Au{111} have been quantitatively compared. Simultaneously acquired apparent tunneling barrier height (ATBH) and scanning tunneling microscopy (STM) images reveal that alkanethiolate molecules have a lower barrier to tunneling, and therefore a higher conductance than alkaneselenolates of the same alkyl chain length. Molecular and contact conductance differences were elucidated by using observed STM topographic tunneling height differences between the analogous species. This apparent topographic difference combined with comparative ATBH data indicate that the observed decrease in conductance for alkaneselenolates compared to alkanethiolates originates exclusively from the Au-chalcogenide physical, chemical, and electronic contact.     

Controlling gold atom penetration through alkanethiolate self-assembled monolayers on Au{111} by adjusting terminal group intermolecular interactions

The penetration behavior of thermally evaporated Au on S(CH(2))(15)CH(3), S(CH(2))(15)CO(2)CH(3), S(CH(2))(15)CO(2)H, K-modified S(CH(2))(15)CO(2)CH(3), and K-modified S(CH(2))(15)CO(2)H self-assembled monolayers (SAM) on Au substrates is investigated. Gold is a particularly interesting metal since vapor-deposited Au atoms are known to pass through alkanethiolate SAMs on Au{111} substrates at room temperature. Here we show that it is possible to control Au penetration by adjusting the interactions between terminal groups. It is found that Au atoms evenly penetrate into the CH(3) and CO(2)CH(3) films, forming smooth buried layers below the organic thin films. For the CO(2)H film, although Au atoms can still penetrate through it, filaments and mushroomlike clusters form due to H-bonding between film molecules. In the case of the K-modified CO(2)CH(3) or CO(2)H films, however, most Au atoms form islands at the vacuum interface. These results suggest that van der Waals forces and H-bonds are not strong enough to block Au from going through but that ionic interactions are able to block Au penetration. The measurements were performed primarily using time-of-flight secondary ion mass spectrometry (ToF-SIMS) and atomic force microscopy (AFM). The combination of these highly complementary probes provides a very useful strategy for the study of metal atom behavior on SAMs.     

Two-dimensional ordering of benzenethiol self-assembled monolayers guided by displacement of cyclohexanethiols on Au(111)

Although the adsorption of benzenethiols (BT) on Au(111) usually leads to the formation of disordered phases, we demonstrate here that the displacement of preadsorbed cyclohexanethiol self-assembled monolayers (SAMs) on Au(111) by BT molecules can be a successful approach to obtain two-dimensional BT SAMs with long-range ordered domains.     

Substrate-induced pairing in 2,3,6,7,10,11-hexakis-undecalkoxy-triphenylene self-assembled monolayers on Au111

We present an STM study of self-assembled monolayers of 2,3,6,7,10,11-undecalkoxy-substituted triphenylene (T11) at the n-tetradecane/Au(111) interface under ambient conditions. T11 molecules self-organize as paired rows with molecules lying flat on the surface in an antiparallel position. Three alkyl chains of each T11 molecule align along the 110 direction of the underlying Au(111) substrate. The association of T11 in molecular pairs appears to result from a substrate-induced mechanism governed by the strong anisotropic interaction between T11 alkyl chains and Au(111).     

Characterization of self-assembled monolayers of thiols on Au(111)

Self-assembled monolayers (SAMs) of n-butanethiol, n-dodecanethiol and their equimolar mixture on Au(111) were prepared and characterized by ellipsometry, contact angle measurement, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Results revealed that these SAMs are oriented ultrathin films with the thickness of nanometer scale, and the SAMs were influenced by the molecular chain length, the lattice orientation and cleanliness of the substrates. The surface of the longer chain SAM is hydrophobic. The thicknesses of three SAMs of n-butanethiol, n-dodecanethiol and their mixture revealed by ellipsometry and XPS are about 0.59 - 0.67nm, 1.60- 1.69 nm and 1.23 - 1.32nm, respectively. AFM images further demonstrated that the SAM formed by the mixture has some microdomains with two different thicknesses.     

Conformation and dynamics of arylthiol self-assembled monolayers on Au(111)

We report a computational investigation of the conformation and the dynamics of self-assembled monolayers (SAMs) of a set of aromatic thiols arranged in the ( radical3 x radical3)-R30 degrees packing ratio on a Au(111) surface using molecular dynamics (MD) simulations. It was found that the molecular conformations were better defined for the arylthiol with two phenyl groups as compared to those with a single phenyl group and that the chemical structure of the head and tail groups had a considerable influence on the system geometry. In line with the density functional theory (DFT) calculations of small thiol molecules, we found for the SAMs that the face-centered cubic (fcc) site on the Au(111) surface was the most preferred, followed by the hexagonal close-packed (hcp) site, while the bridge position showed the characteristics of a local energy maximum. The dynamics of thiol head groups on these three Au sites was found to govern the overall dynamics of SAMs as measured by the mean square displacement. We also report that both the conformation and the dynamics on the studied time scale were driven by the SAM formation energy.     

Structure and electrochemistry of 4,4'-dithiodipyridine self-assembled monolayers in comparison with 4-mercaptopyridine self-assembled monolayers on Au(111)

4,4'-Dithiodipyridine (PySSPy) monolayers on Au(111) were investigated by cyclic voltammetry, X-ray photoelectron spectroscopy (XPS) and in situ scanning tunneling microscopy (STM). The studies were performed in solutions of different anions and pHs (0.1 M H2SO4, 0.1 M HClO4, 0.1 and 0.01 M Na2SO4, 0.1 and 0.01 M NaOH). The cyclic current-potential curves in H2SO4 show current peaks at about 0.4 V, which are absent for all other electrolytes at this potential. The XPS data suggest that PySSPy adsorbs via the S endgroup on the gold surface and the S-S bond breaks during adsorption. From the chemical shift of the N(ls) peak, it is concluded that in acidic media the self-assembled monolayer (SAM) is fully protonated, whereas in basic solution it is not. The pKa is estimated to be 5.3. STM studies reveal the existence of highly ordered superstructures for the SAM. In Na2SO4 and H2SO4, a (7 x mean square root of 3) structure is proposed. However, whereas in Na2SO4 solutions the superstructure does not change with potential, in 0.1 M H2SO4 the superstructure is observed only negative of the current peak at +0.4 V. At more positive potentials, the film becomes disordered. The results are compared to those for 4-mercaptopyridine (PyS) SAMs. XPS experiments and current-potential curves indicate that both molecules adsorb in the same manner on Au(111), that is, even in the case of PySSPy the adspecies is PyS. The STM results, however, call for a more subtle interpretation. While in Na2SO4 solutions the observed superstructures are the same for both SAMs, markedly different structures are found for PySSPy and PyS SAMs in 0.1 M H2SO4.     

Electrodeposition of Au monolayer on Pt(111) mediated by self-assembled monolayers

In-situ scanning tunneling microscopy (STM), cyclic voltammetry (CV), and infrared reflection-adsorption spectroscopy (IRRAS) have been used to examine the electrodeposition of gold onto Pt(111) electrodes modified with benzenethiol (BT) and benzene-1,2-dithiol (BDT) in 0.1 M HClO4 containing 10 microM HAuCl4. Both BT and BDT were attached to Pt(111) via one sulfur headgroup. STM and IRRAS results indicated that the other SH group of BDT was pendant in the electrolyte. Both BT and BDT formed (2 x 2) structures at the coverage of 0.25, and they were transformed into (square root(3) x square root(3))R30 degrees as the coverage was raised to 0.33. These two organic surface modifiers resulted in 3D and 2D gold islands at BT- and BDT-coated Pt(111) electrodes, respectively. The pendant SH group of BDT could interact specifically with gold adspecies to immobilize gold adatoms on the Pt(111) substrate, which yields a 2D growth of gold deposition. Molecular resolution STM revealed an ordered array of (6 x 2 square root(13)) after a full monolayer of gold was plated on the BDT/Pt(111) electrode. Since BDT was strongly adsorbed on Pt(111), gold adatoms only occupied free sites between BDT admolecules on Pt(111). This is supported by a stripping voltammetric analysis, which reveals no reductive desorption of BDT admolecules at a gold-deposited BDT/Pt(111) electrode. It seems that the BDT adlayer acted as the template for gold deposit on Pt(111). In contrast, a BT adlayer yielded 3D gold deposit on Pt(111). This study demonstrates unambiguously that organic surface modifiers could contribute greatly to the electrodeposition of metal adatoms.     

Complex surface chemistry of 4-mercaptopyridine self-assembled monolayers on Au(111)

The adsorption of 4-mercaptopyridine on Au(111) from aqueous or ethanolic solutions is studied by different surface characterization techniques and density functional theory calculations (DFT) including van der Waals interactions. X-ray photoelectron spectroscopy and electrochemical data indicate that self-assembly from 4-mercaptopyridine-containing aqueous 0.1 M NaOH solutions for short immersion times (few minutes) results in a 4-mercaptopyridine (PyS) self-assembled monolayer (SAM) with surface coverage 0.2. Scanning tunneling microscopy images show an island-covered Au surface. The increase in the immersion time from minutes to hours results in a complete SAM degradation yielding adsorbed sulfur and a heavily pitted Au surface. Adsorbed sulfur is also the main product when the self-assembly process is made in ethanolic solutions irrespective of the immersion time. We demonstrate for the first time that a surface reaction is involved in PyS SAM decomposition in ethanol, a surface process not favored in water. DFT calculations suggest that the surface reaction takes place via disulfide formation driven by the higher stability of the S-Au(111) system. Other reactions that contribute to sulfidization are also detected and discussed.     

Surface structure and interface dynamics of alkanethiol self-assembled monolayers on Au(111)

Scanning tunneling microscopy (STM) and high-resolution electron energy loss spectroscopy (HREELS) were used to examine the structural transitions and interface dynamics of octanethiol (OT) self-assembled monolayers (SAMs) caused by long-term storage or annealing at an elevated temperature. We found that the structural transitions of OT SAMs from the c(4 x 2) superlattice to the (6 x square root 3) superlattice resulting from long-term storage were caused by both the dynamic movement of the adsorbed sulfur atoms on several adsorption sites of the Au(111) surface and the change of molecular orientation in the ordered layer. Moreover, it was found that the chemical structure of the sulfur headgroups does not change from monomer to dimer by the temporal change of SAMs at room temperature. Contrary to the results of the long-term-stored SAMs, it was found that the annealing process did not modify either the interfacial or chemical structures of the sulfur headgroups or the two-dimensional c(4 x 2) domain structure. Our results will be very useful for a better understanding of the interface dynamics and stability of sulfur atoms in alkanethiol SAMs on Au(111) surfaces.     

Stress in self-assembled monolayers: omega-biphenyl alkane thiols on Au(111)

Self-assembled monolayers of omega-(4'-methylbiphenyl-4-yl) alkane thiols CH3(C6H4)2(CH2)(n)SH (BPn, n = 2, 3, and 5) on Au(111) substrates, prepared at room and elevated temperatures, were studied using scanning tunneling microscopy. In contrast to the biphenyl thiol analogues with n = 0 or 1, ordered domains of large size are formed which exhibit small, periodic height variations on a length scale of several nanometers. These are attributed to solitons (or domain walls), resulting from structural mismatch between the molecular adlayer and the gold substrate. The implications of these results for the design of aromatic thiols to cope with stress and yield low-defect density self-assembled monolayers are discussed.     

Formation of ordered self-assembled monolayers by adsorption of octylthiocyanates on Au(111)

Self-assembled monolayers (SAMs) were formed by the spontaneous adsorption of octythiocyanate (OTC) on Au(111) using both solution and ambient-pressure vapor deposition methods at room temperature and 50 degrees C. The surface structures and adsorption characteristics of the OTC SAMs on Au(111) were characterized by scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS). The STM observation showed that OTC SAMs formed in solution at room temperature have unique surface structures including the formation of ordered and disordered domains, vacancy islands, and structural defects. Moreover, we revealed for the first time that the adsorption of OTC on Au(111) in solution at 50 degrees C led to the formation of SAMs containing small ordered domains, whereas the SAMs formed by vapor deposition at 50 degrees C had long-range ordered domains, which can be described as (radical3 x 2 radical19)R5 degrees structures. XPS measurements of the peaks in the S 2p and N 1s regions for the OTC SAMs showed that vapor deposition is the more effective method as compared to solution deposition for obtaining high-quality SAMs by adsorption of OTC on gold. The results obtained will be very useful in understanding the SAM formation of organic thiocyanates on gold surfaces.     

Chemically transformable configurations of mercaptohexadecanoic acid self-assembled monolayers adsorbed on Au(111)

Carboxyl-terminated self-assembled monolayers (SAMs) are commonly used in a variety of applications, with the assumption that the molecules form well-ordered monolayers. In this work, near-edge X-ray absorption fine structure measurements verify that well-ordered monolayers can be formed using acetic acid in the solvent. Disordered monolayers with unbound molecules present in the film result using only ethanol. A stark reorientation occurs upon deprotonation of the end group by rinsing in a KOH solution. This reorientation of the end group is reversible with tilted-over, hydrogen-bound carboxyl groups while the carboxylate ion end groups are upright. C(1s) photoemission shows that SAMs formed and rinsed with acetic acid in ethanol have protonated end groups, while SAMs formed without acetic acid have a large fraction of carboxylate-terminated molecules.     

Electroactive self-assembled biferrocenyl alkanethiol monolayers on Au(111) surface and on gold nanoclusters

The spectroscopic and electrochemical characterizations of electrochemically stable biferrocene-modified Au clusters and chemisorbed biferrocenylalkanethiols on Au(111) surface were studied. The characterizations of biferrocene-modified Au cluster using TEM, UV-vis, and NMR techniques are also reported. Two successive reversible one-electron redox waves were observed for the biferrocenylalkanethiol Au nanoclusters and biferrocenylalkanethiol monolayers on Au(111) surface in the cyclic voltammetry. Furthermore, the positive and negative current peaks for each redox wave occur at almost the same potential, and the peak current increases almost linearly with the sweep rate. Repeat scanning does not change the voltammograms, demonstrating that these monolayers are stable to electrochemical cycling. The coverages of electroactive biferrocene in the monolayers were calculated from the cyclic voltammograms. The standard electron-transfer rate constant was calculated from the splitting between the oxidation and reduction peaks.     

STM study of mixed alkanethiol/biphenylthiol self-assembled monolayers on Au(111)

A method is presented for depositing mixed self-assembled monolayers (SAMs) of dodecanethiol (C12) and 4'-methyl-1,1'-biphenyl-4-butane (H3C-C6H4-C6H4-(CH2)4-SH, BP4) by insertion of BP4 into a closely packed SAM of dodecanethiol on Au(111). Insertion takes place at defect sites such as domain boundaries or etch pits in the gold surface that are characteristic of C12 monolayers on gold. With a lower probability, insertion also occurs beside defect sites inside dodecanethiol domains. Insertion at defect sites results in domains of BP4, whereas insertion into C12 domains leads to isolated BP4 molecules. The isolated BP4 molecules are shown not to move at room temperature. By comparing the apparent height of the isolated BP4 molecules and BP4 domains, it is proposed that the isolated molecules have the same conformation as in the full-coverage phase. A simple two-layer model is proposed to characterize the current transport through BP4. The decay constant beta for the phenylene groups is deduced from the apparent STM heights of the inserted BP4 islands compared to the STM heights of the C12 closely packed monolayers.     

Electrochemical stability of self-assembled monolayers on nanoporous Au

Desorption of thiolate self-assembled monolayers (SAMs) seriously limits the fabrication of thiol-based devices. Here we demonstrate that nanoporous Au produced by dealloying Au-Ag alloys exhibits high electrochemical stability against thiolate desorption. Nanoporous Au has many defective sites, lattice strain and residual Ag on the ligament surface. First-principles calculations indicate that these surface aspects increase the binding energy between a SAM and the surface of nanoporous Au.     

Electrochemistry of self-assembled monolayers of the blue copper protein Pseudomonas aeruginosa azurin on Au(111)

We report the self-assembly and electrochemical behaviour of the blue copper protein Pseudomonas aeruginosa azurin on Au(111) electrodes in aqueous acetate buffer (pH=4.6). The formation of monolayers of this protein is substantiated by electrochemical measurements. Capacitance results indicate qualitatively that the protein is strongly adsorbed at sub-μM concentrations in a broad potential range (about 700 mV). This is further supported by the attenuation of a characteristic cyclic voltammetric peak of Au(111) in acetate solution with increasing azurin concentration. Reductive desorption is clearly disclosed in NaOH solution (pH=13), strongly suggesting that azurin is adsorbed via its disulphide group. An anodic peak and a cathodic peak associated with the copper centre of azurin are finally observed in the differential pulse voltammograms. These peaks are, interestingly, indicative of long-range electrochemical electron transfer such as paralleled by intramolecular electron transfer between the disulphide anion radical and the copper atom in homogeneous solution, and anticipated by theoretical frames. Together with reported in situ scanning tunnelling microscopy (STM) results they constitute the first case for electrochemistry of self-assembled monolayers of azurin, even redox proteins. This integrated investigation provides a new approach to both structure and function of adsorbed redox metalloproteins at the molecular level.