Chiral helicenoid diarylethene with large change in specific optical rotation by photochromism

A diarylethene possessing one [4]thiaheterohelicene and one benzothiophene, the latter with a chiral methoxymethoxyethyl group on its C-3 position, was proved to work as a switch of specific optical rotation at a wavelength at which both colored and colorless forms have no absorption in solution. The difference of the specific optical rotation was 1300 degrees between the open form and the photostationary state. The specific optical rotation of one of the isolated optically active major colored forms was -4680 degrees. The conversion to the colored form was 64%, and the diastereomeric excess of photocyclization was 47%.     

2,4,5,7-Tetranitrofluorescein in solutions: novel type of tautomerism in hydroxyxanthene series as detected by various spectral methods

Stepwise dissociation and tautomerism of 2,4,5,7-tetranitrofluorescein (TNF) were studied by using vis-spectroscopy in dimethylsulfoxide (DMSO), in aqueous acetone, and in cetyl-trimethylammonium chloride (CTAC) micellar solutions at ionic strength of the bulk phase 4.00M KCl. The pK(a) values in DMSO and 90 mass% (CH3)2CO as well as the 'apparent'pK(a)(a) values of the substance in micellar media were determined spectrophotometrically. The neutral (molecular) form H2R is found to be completely converted into the colorless lactone. Moreover, the lactonic structure, yellow due to 'nitrophenolate' absorption band, predominates also in the case of TNF dianion R2-. Contrary to the unsubstituted fluorescein, and like 2,4,5,7-tetrabromofluorescein (eosin), the monoanion HR- of TNF with lambda(max) 522-525 nm and E(max) approximately (60-62)x10(3) dm(3)mol(-1)cm(-1) exists mainly as a deeply and intensively colored structure with non-ionized carboxylic and ionized hydroxylic group; its fluorescence spectra in various media are registered. In 90% acetone, the Stokes shift is 1.17x10(3)cm(-1), fluorescence lifetime equals 2.3 ns. An extremely expressed trend to dianion-lactone formation of R2- ion of TNF is confirmed in the systems studied. For TNF in DMSO, in aqueous acetone, in surfactant micelles, and in trichloromethane extracts of ionic associatiates with N(n-Bu)4+ and N(n-Hept)4+, the deeply colored 'quinon-phenolate' dianion, typical for all hydroxyxanthenes, is not registered at all. The sequence of dissociation of functional groups in solution is confirmed using IR spectroscopy in DMSO.     

Diformylhydrazine as analytical reagent for spectrophotometric determination of iron(II) and iron(III)

The bidentate ligand diformylhydrazine (OHC-HN-NH-CHO), DFH, combines with iron(II) and iron(III) in alkaline media in the pH range 7.3-9.3 to form an intensely colored red-purple iron(III) complex with an absorption maximum at 470 nm. Beer's law is obeyed for iron concentrations from 0.25 to 13 microg mL(-1). The molar absorptivity was in the range 0.3258x10(4)-0.3351x10(4) L mol(-1) cm(-1) and Sandell's sensitivity was found to be 0.0168 microg cm(-2). The method has been applied to the determination of iron in industrial waste, ground water, and pharmaceutical samples.     

Synthesis and characterization of yellow water-borne polyurethane using a diol colorant as extender

<正>A novel and facile method toward a series of yellow water-borne polyurethane was developed by using an intrinsically colored diol in this paper.The yellow aqueous dispersion PCLD-HENA-PU was synthesized based on isophorone diisocyanate(IPDI), polycaprolactonediol(PCLD) and 2,2-dimethylol propionic acid(DMPA) using a yellow diol N,N-bis(2-hydroxyethyl)-4-nitroaniline (HENA) as a chain extender.Due to the complete reaction of OH group in colorant HENA with NCO group in diisocyanate,a series of stable yellow polyurethanes could be obtained conveniently and easily.The structure of PCLD-HENA-PUs was confirmed by means of Fourier transform infrared spectroscopy.The UV-visible absorption analysis showed a blue shift effect of about 7 nm when HENA was blocked into polyurethane chain.The absorption intensity of PCLD-HENA-PUs increased with increasing HENA content.It was found that the tensile strength enhanced from 8.6 to 19.6 MPa with HENA content increased from 0 to 18.0%,while the extensibility decreased from 449 to 300%.The thermal gravimetric analysis presented that the initial decompose temperature began from about 250℃,and had a little increase with increasing the HENA content.     

A photochromic acceptor as a reversible light-driven switch in fluorescence resonance energy transfer (FRET)

A method has been developed for the quantitative determination of fluorescence resonance energy transfer (FRET) based on the modulation of donor fluorescence upon the reversible photoconversion of a photochromic acceptor. A model system was devised, consisting of Lucifer Yellow cadaverine (LYC, donor) conjugated to the photochromic molecule, 6-nitroBIPS (1′,3′-dihydro-1′-(2-carboxyethyl)-3′,3′-dimethyl-6-nitrospiro[2H-1-benzopyran-2,2′-(2H)-indoline]). Near-ultraviolet irradiation catalyzes the conversion of the colorless spiropyran (SP) to the colored merocyanine (MC) form of 6-nitroBIPS. Only the MC form absorbs at the emission wavelengths of the donor, thereby potentiating FRET, as demonstrated by quenching of the donor. Subsequent irradiation in the visible MC absorption band reverts 6-nitroBIPS to the SP form and FRET is inactivated. The acceptor exhibited high photostability under repeated cycles of alternating UV–Vis irradiation. In this model system, the intramolecular FRET efficiency was close to 100%. The observed maximal donor quenching of 34±3% was indicative of an equilibrium determined by the high quantum efficiency of forward conversion (SP→MC) induced by near-UV irradiation and a low but finite quantum efficiency of the back reaction resulting from excitation of the MC form directly as well as indirectly (by FRET via the donor). A quantitative formalism for the photokinetic scheme was developed. Photochromic FRET (pcFRET) permits repeated, quantitative, and non-destructive FRET determinations for arbitrary relative concentrations of donor and acceptor and thus offers great potential for monitoring dynamic molecular interactions in living cells over extended observation times by fluorescence microscopy.     

Colorimetric determination of macrolide antibiotics using ferric ion

Macrolide antibiotics such as erythromycin, oleandomycin, spiromycin, and tylosin are found to react with Fe(3+) in the presence of an acetic acid-sulfuric acid mixture to form a colored product having a useful absorption band at 592 nm. Troleandomycin forms only a weakly colored product upon reaction. The molar absorptivity is about 2900 1 mol(-1) cm(-1) for erythromycin and the detection limit is 5 mug ml(-1). This colorimetric method permits the analysis of fermentation broths containing either erythromycin or tylosin without a separation step.     

Evaluation of N-bromosuccinimide as a new analytical reagent for the spectrophotometric determination of fluoroquinolone antibiotics

Analytical studies were carried out, for the first time, to evaluate the use of N-bromosuccinimide (NBS) as an analytical reagent for the spectrophotometric determination of eleven therapeutically important fluoroquinolone antibiotics (FQA). The procedures involved the reaction of the FQA with NBS and subsequent measurement of the excess NBS by its reaction with p-phenylenediamine (PDA) to give a violet colored product that was measured at 530 nm. Different variables affecting the reaction (concentration of NBS, concentration of PDA, pH of reaction medium, reaction time, and the diluting solvents) were carefully studied and optimized. The molar ratio and mechanism of the reaction between each of the studied FQA with NBS were proposed using UV-vis, IR, and NMR techniques. Under the optimum reaction conditions, the analytical method was developed and validated. Beer's law was obeyed in the general concentration range of 3-25 microg/ml. The assay limits of detection and quantitation were 0.33-1.29 and 1.10-4.31 microg/ml, respectively. The precision of the method was satisfactory; the values of relative standard deviations did not exceed 2%. The proposed method was successfully applied to the analysis of the investigated FQA in their pure and pharmaceutical dosage forms without interference from the common excipients (label claim values were 99.85-100.17+/-0.13-0.59%). Interference from ascorbic acid, that is co-formulated as a stabilizer for the ampoule form, was avoided by its pre-oxidation with potassium bromate before applying the analytical procedure. The results obtained by the proposed method were comparable with those obtained by the official and reported methods.     

Crystal and solution structures of photochromic spirobenzothiopyran. First full characterization of the meta-stable colored species.

Full elucidation for stable, colorless, and meta-stable colored structures of a new spirobenzothiopyran has been achieved both in the solid state and in a solution. 1',3',3'-Trimethyl-6-nitrospiro[(2H)-1-benzothiopyran-2,2'-indoline] with an ester group as a substituent at the 8-position of 1-sp shows photochromism. The blue-green colored species resulted from UV irradiation (365 nm) in one minute and spontaneously bleaches within one minute in acetone and methanol at 27 degrees C. UV exposure (365 nm) of 1-sp in methanol for 3 h at room temperature results in the growth of deep blue needlelike single crystals of the open form of spirobenzothiopyran, photomerocyanine 1-pmc, whose structures in the solid state and in solution were obtained unambiguously. The X-ray structural analysis of 1-pmc revealed the molecular structure of the zwitterionic photomerocyanine with s-trans,s-trans conformation. 1-pmc is soluble to polar solvents and thermally returns to 1-sp. In the DMSO solution, 1-pmc is found to return slowly to 1-sp (1-pmc gave only 18% of 1-sp for 30 min at 22 degrees C). The detailed NMR studies in DMSO-d(6) including COSY and NOE techniques as well as isotope labeling of the compound showed the structure with s-trans,s-cis conformation in a solution.     

Aggregation-induced emission of tetraphenylethene derivative as a fluorescence method for probing the assembling/disassembling of amphiphilic molecules

The aggregation-induced emission (AIE) of a 1,2-diphenyl-1,2-di(p-tolyl)ethene (TPE) was explored as a novel fluorescence method for probing the assembling/disassembling of amphiphilic molecules. The fluorescence intensity was able to monitor the formation of micelles and determine the critical micelle concentration (CMC) of surfactants. The temperature-dependent micellization of the pharmaceutically important PEO-PPO-PEO copolymer, Pluronic F127, was further studied by using the TPE fluorescence spectrum intensity. Our results showed good agreement with those reported in the literature by using other methods. The special advantage of the AIE probe method was further explored to determine the assembling/disassembling process of the colored amphiphilic molecule, 1-[4-(3-phenylazophenoxy)butyl]triethylamine bromide (AzoC4), whose CMC value has not previously been described. Since the TPE fluorescence signal mainly comes from the aqueous phase, not from the inside of hydrophobic core, it provides a possible platform to study the CMC of those colored surfactants. Based on the novel fluorescence properties of TPE in the aggregated and dispersed states, one can conclude that the TPE method is a promising method for the determination of the CMC and critical micellization temperature (CMT), particularly having a special advantage to determine the assembling/disassembling process of colored amphiphilic molecules.     

Determination of doxorubicin hydrochloride by visible spectrophotometry

Four simple and sensitive visible spectrophotometric methods (A-D) have been described for the assay of doxorubicin hydrochloride either in pure form or in pharmaceutical formulations. Method A was developed based on oxidation of the drug with Fe(III) to produce Fe(II), which subsequently reacts with 1.10-ortho-phenanthroline to form a red colored complex (lambda(max): 510 nm) at pH 4.6. Method B involves the reduction of Folin-Ciocalteu (F-C) reagent by the drug and the reduced species formed possesses a characteristic intense blue color (lambda(max): 770 nm). In methods C and D. oxidation of the drug with periodate at specified experimental conditions yields formaldehyde and dialdehyde, which in turn react either with 3-methyl-2-benzothiazolinone hydrazone hydrochloride to form an intensely brilliant blue cationic dye (lambda(max): 620-670 nm. method C) or by condensation with phenylhydrazine hydrochloride (PHH) to form orange-red colored product (lambda(max): 510 nm, method D) in the presence of potassium ferricyanide. All of the variables have been optimized and the reaction mechanisms presented. The concentration measurements are reproducible within a relative standard deviation of 1.0%.     

A selective spectrophotometric method for determination of rosoxacin antibiotic using sodium nitroprusside as a chromogenic reagent

A selective spectrophotometric method for the determination of rosoxacin (ROS), a 4-quinolone antimicrobial agent, has been developed and validated. The method was based on the reaction of ROS with alkaline sodium nitroprusside (SNP) reagent at room temperature forming a red colored chromogen measured at 455 nm. The conditions affecting the reaction (SNP concentration, pH, color-developing time, temperature, diluting solvent and chromogen stability time) were optimized. Under the optimum conditions, good linear relationship (r=0.9987) was obtained between the absorbance and the concentration of ROS in the range of 20-50 microg ml(-1). The assay limits of detection and quantitation were 2.5 and 8.4 microg ml(-1), respectively. The method was successfully applied to the analysis of bulk drug and laboratory-prepared tablets; the mean percentage recoveries were 100.1+/-0.33 and 101.24+/-1.28%, respectively. The results were compared favourably with those obtained by the reported method; no significant difference in the accuracy and precision as revealed by the accepted values of t- and F-tests, respectively. The robustness and ruggedness of the method was checked and satisfactory results were obtained. The proposed method was found to be highly selective for ROS among the fluoroquinolone antibiotics. The reaction mechanism was proposed and it proceeded in two steps; the formation of nitroferrocyanide by the action of sodium hydroxide alkalinity on SNP and the subsequent formation of the colored nitrosyl-ROS derivative by the attack at position 6 of ROS.     

Identification of a trace colored impurity in drug substance by preparative liquid chromatography and mass spectrometry

6-(Nitrooxy)hexyl-(2z)-4-(acetyloxy)-3-[4-(methylsulfonyl)phenyl]-2-phenylbut-2-enoate (enoate 1) was investigated as a novel therapy for pain relief. In a recent manufacturing run at the pilot plant scale, the enoate drug substance was found to have a yellowish color not observed previously. An unknown impurity at trace level was detected by high-performance liquid chromatographic (HPLC) analysis and found to be the primary cause for the color of the drug substance. The colored impurity was enriched by preparative HPLC and structurally elucidated by liquid chromatography/tandem mass spectrometry (LC/MS/MS). It was found that the colored impurity was derived from the product of oxidative dimerization of rofecoxib, an impurity present in the enoic acid intermediate. It was further revealed by the photodiode array and LC/MS/MS data that the colored impurity exists in the drug substance as a pair of double-bond isomers with one isomer at majority. These findings were also confirmed by synthesizing the colored impurity through the proposed pathway.     

Flow injection colorimetric method using acidic ceric nitrate as reagent for determination of ethanol

Ceric ammonium nitrate has been used for qualitative analysis of ethanol. It forms an intensely colored unstable complex with alcohol. In this work, a simple flow injection (FI) colorimetric method was developed for the determination of ethanol, based on the reaction of ethanol with ceric ion in acidic medium to produce a red colored product having maximum absorption at 415 nm. Absorbance of this complex could be precisely measured in the FI system. A standard or sample solution was injected into a deionized water donor stream and flowed to a gas diffusion unit, where the ethanol diffused through a gas permeable membrane made of plumbing PTFE tape into an acceptor stream to react with ceric ammonium nitrate in nitric acid. Color intensity of the reddish product was monitored by a laboratory made LED based colorimeter and the signal was recorded on a computer as a peak. Peak height obtained was linearly proportional to the concentration of ethanol originally presented in the injected solution in the range of 0.1-10.0% (v/v) (r² = 0.9993), with detection limit of 0.03% (v/v). With the use of gas diffusion membrane, most of the interferences could be eliminated. The proposed method was successfully applied for determination of ethanol in some alcoholic beverages, validating by gas chromatographic method.     

Solid phase extraction and spectrophotometric determination of silver with 2-(2-quinolylazo)-5-diethylaminophenol as chromogenic reagent.

A new chromogenic reagent, 2-(2-quinolylazo)-5-diethylaminophenol (QADEAP), was synthesized. A sensitive, selective and rapid method has been developed for the determination of microg/L level silver ion based on the rapid reaction of silver(l) with QADEAP and the solid phase extraction of the colored chelate with C18 cartridge. The QADEAP reacts with Ag(l) to form a violet chelate of a molar ratio 1:2 (silver to QADEAP) in pH 3.5-8.0. This chelate was prconcentrated by solid phase extraction with C18 cartridge. An enrichment factor of 100 was achieved. The molar absorptivity of the chelate is 1.30 x 10(5) L mol(-1) cm(-1) at 590 nm in measured solution. Beer's law is obeyed in the range of 0.01-0.6 microg/ml. The relative standard deviation for eleven replicate samples of 0.01 microg/ml is 1.15%. The detection limit is 0.02 microg/L in the original samples. This method was applied to the determination of microg/L level silver ion in water with good results.     

The use of 3-(2-pyridyl)-5,6-diphenyl-1,2,4-triazine as a precolumn derivatizing reagent in HPLC determination for Fe(II) in natural samples.

3-(2-Pyridyl)-5,6-diphenyl-1,2,4-triazine (PDT) was used for the first time as a precolumn derivatizing reagent in the high-performance liquid chromatography (HPLC) method with UV absorbance detection for the Fe(II) determination. The Fe(II) reacts with PDT to form a magenta colored chelate in the presence of sodium dodecyl sulfate (SDS) and acetic acid-sodium acetate buffer solution medium of pH 4.65. The selection of maximum absorbance detection wavelength and the optimum composition of the organic modifier in the mobile phase were investigated in detail for the quantitative determination of Fe(II) using HPLC system. The formed Fe(II)-PDT chelate was satisfactorily separated from PDT on an Agilent Shim-pack ODS column (Eclipse XDB-C8, 4.6 x 150 mm) by isocratic elution with acetonitrile and 0.02 mol L(-1) acetic acid-sodium acetate buffer solution (pH 4.65, containing 0.02% of SDS and 60 x 10(-3) mol L(-1) NaClO(4)) as mobile phase at a flow rate of 1 mL min(-1), and monitored with a multiple wavelength detector. The detection limit (S/N = 3) is 0.35 ng mL(-1). Due to the excellent separation ability of HPLC, the innovative introduction of PDT as the precolumn derivatizing reagent, and the proper selection of the detect wavelength, the sensitivity of our newly developed HPLC method was enhanced remarkably compared to those of the common spectrophotometric methods. The developed HPLC method was successfully applied to the determination of Fe(II) in lake water samples.     

Synthesis of functionalized spiropyran and spirooxazine derivatives and their photochromic properties

Three series of functionalized spiropyrans and spirooxazines derivatives were synthesized and their photochromic properties were investigated in particular regard to the fatigue resistance, the lifetime of the colored merocyanine form and the interaction of the colored form molecule. (1) Spiropyrans 5 and spironaphthooxazines 6 having an antioxidant group as a pendant exhibited higher fatigue resistance than that of the parent spiro compounds in solution. In particular, spiropyrans 5 showed higher resistance than parent compound 1 in the presence of an equimolar amount of the corresponding antioxidant. (2) bis-Spironaphthooxazines 8a–8i and 10 connected through a phosphoryl group exhibited higher fatigue resistance and longer lifetime of the colored merocyanine form than those of the parent spirooxazine 7. (3) Symmetrical bis-spiro photochromic compounds 15 and 16 and unsymmetrical bis-spiro compounds 13, 14 and 17 were synthesized. The bis-spiro photochromic compounds were found to undergo intramolecular interaction between the colored merocyanine forms.     

Exploiting guava leaf extract as an alternative natural reagent for flow injection determination of iron

Guava leaf extract is utilized as an alternative natural reagent for quantification of iron. The flow injection technique enables the use of the extract in acetate buffer solution without the need of further purification. Some properties of the extract such as its stability and ability to form a colored complex with iron were studied. The proposed system is an environmentally friendly method for determination of iron with less toxic chemical wastes.     

The photochromic properties of indoline spirooxazine-thermoplastic polymer systems obtained by supercritical fluid impregnation

The impregnation of thermoplastic polymers (polyethylene, polypropylene, polymethyl methacrylate, and polycarbonate) with photochromic compounds from the class of indoline spirooxazines in supercritical carbon dioxide (SC-CO₂) was studied. The concentration of the photochrome and the kinetics of decolorization of its colored form depended strongly on the type of the polymer matrix and the structure of spirooxazine. The introduction of 1,3′,3′-trimethylspiro(indoline-2′,3-3H-anthraceno[2,1-b][1,4]oxazine) (SAO) into polycarbonate caused anomalous stabilization (the prolonged conservation of the excited colored form of SAO in the polymer matrix). In contrast to other photochrome-polymer pairs, after supercritical impregnation into polycarbonate, at least 10% of all SAO molecules were in the colored form, which was highly stable and did not decolorize after 150 days; the rest of the impregnated SAO molecules were localized in the matrix as individual molecules, partially colorized after matrix relaxation, or nanocrystals of characteristic sizes ∼10–20 nm. The mechanisms of the anomalous stabilization of the colored SAO form in the polycarbonate matrix are discussed. Original Russian Text ? N.N. Glagolev, A.B. Solov’eva, A.V. Kotova, V.T. Shashkova, B.I. Zapadinskii, N.L. Zaichenko, L.S. Kol’tsova, A.I. Shienok, P.S. Timashev, V.N. Bagratashvili, 2009, published in Zhurnal Fizicheskoi Khimii, 2009, Vol. 83, No. 5, pp. 985–992.     

THE SPECTROSCOPY AND PHOTOCHEMISTRY OF NATURALLY OCCURRING AND SYNTHETIC CHROMENES

Abstract— –All naturally occurring and synthetic chromenes studied exhibit photochromism at — 196°C and in some cases at room temperature. Chromenes containing a coumarin moiety have the least photochemistry and also exhibit the strongest emissions. Chromenes containing a hydroxyl group ortho to an acetyl group exhibit solely a phosphorescence. Lapachenole (a 7,8-benzochromene) shows the most rapid and highest percentage conversion to the colored form and no emission. Photocolored form of evodione can be produced by a triplet energy transfer from benzophenone.     

Synthesis and photochromic properties of substituted naphthopyran compounds

A group of 3,3-diaryl-3H-naphtho[2,1-b]pyran compounds with functional substituents at the 5- and 6-positions of the naphthopyran skeleton and the para positions at the 3-aryl moieties were prepared through condensation reactions between 2-naphthol derivatives and 1,1-diarylprop-2-yn-1-ol derivatives. The chemical structures of the compounds were confirmed by NMR and MS. The crystal structure of 3,3-diphenyl-6-morpholino-3H-naphtho[2,1-b]pyran (4b) was determined and the relationship between the pyran substructure and photochromism was discussed. The photochromic properties were studied as well, and decoloration kinetics of colored forms was fitted to the biexponential model. Among these compounds, 4b was considered to be the best one due to the large ΔOD of colored form, which is one of the most important properties used in the photochromic material.