Resorcinol based acyclic dimeric and cyclic di- and tetrameric cyclodiphosphazanes: synthesis, structural studies, and transition metal complexes

The condensation reaction of resorcinol with cis-[ClP(μ-N(t)Bu)(2)PN(H)(t)Bu] produced a difunctional derivative 1,3-C(6)H(4)[OP(μ-N(t)Bu)(2)PN(H)(t)Bu](2) (1), whereas the similar reaction with [ClP(μ-N(t)Bu)](2) resulted in the formation of a 1:1 mixture of dimeric and tetrameric species, [{P(μ-N(t)Bu)}(2){1,3-(O)(2)-C(6)H(4)}](2) (2a) and [{P(μ-N(t)Bu)}(2){1,3-(O)(2)-C(6)H(4)}](4) (2b), which were separated by repeated fractional crystallization and column chromatography. The reaction of dimer 2a with H(2)O(2) and selenium produces tetrachalcogenides [{(O)P(μ-N(t)Bu)}(2){1,3-(O)(2)-C(6)H(4)}](2) (3) and [{(Se)P(μ-N(t)Bu)}(2){1,3-(O)(2)-C(6)H(4)}](2) (4), respectively. The reaction between the dimer (2a) and [Pd(μ-Cl)(η(3)-C(3)H(5))](2) or AuCl(SMe(2)) yielded the corresponding tetranuclear complexes, [{((Cl)(η(3)-C(3)H(5))Pd)P(μ-N(t)Bu)}(2){1,3-(O)(2)-C(6)H(4)}](2) (5) and [{(ClAu)P(μ-N(t)Bu)}(2){1,3-(O)(2)-C(6)H(4)}](2) (6) in good yield. The complexes 5 and 6 are the rare examples of phosphorus macrocycles containing two or more exocyclic transition metal fragments. Treatment of 1 with copper halides in 1:1 molar ratio resulted in the formation of one-dimensional (1D) coordination polymers, [(CuX){1,3-C(6)H(4){OP(μ-N(t)Bu)(2)PN(H)(t)Bu}}(2)](n) (7, X = Cl; 8, X = Br; 9, X = I), which showed the helical structure in solid state because of intramolecular hydrogen bonding, whereas similar reactions of 1 with 4 equiv of copper halides also produced 1D-coordination polymers, [(Cu(2)X(2))(2){1,3-C(6)H(4){OP(μ-N(t)Bu)(2)PN(H)(t)Bu}(2)}](n) (10, X = Cl; 11, X = Br; 12, X = I), but containing Cu(2)X(2) rhomboids instead of CuX linkers. The crystal structures of 1, 2a, 2b, 4, 7-9, and 12 were established by X-ray diffraction studies.     

An isomorphous series of cubic, copper-based triazolyl isophthalate MOFs: linker substitution and adsorption properties

An isomorphous series of 10 microporous copper-based metal-organic frameworks (MOFs) with the general formulas (∞)(3)[{Cu(3)(μ(3)-OH)(X)}(4){Cu(2)(H(2)O)(2)}(3)(H-R-trz-ia)(12)] (R = H, CH(3), Ph; X(2-) = SO(4)(2-), SeO(4)(2-), 2 NO(3)(2-) (1-8)) and (∞)(3)[{Cu(3)(μ(3)-OH)(X)}(8){Cu(2)(H(2)O)(2)}(6)(H-3py-trz-ia)(24)Cu(6)]X(3) (R = 3py; X(2-) = SO(4)(2-), SeO(4)(2-) (9, 10)) is presented together with the closely related compounds (∞)(3)[Cu(6)(μ(4)-O)(μ(3)-OH)(2)(H-Metrz-ia)(4)][Cu(H(2)O)(6)](NO(3))(2)·10H(2)O (11) and (∞)(3)[Cu(2)(H-3py-trz-ia)(2)(H(2)O)(3)] (12(Cu)), which are obtained under similar reaction conditions. The porosity of the series of cubic MOFs with twf-d topology reaches up to 66%. While the diameters of the spherical pores remain unaffected, adsorption measurements show that the pore volume can be fine-tuned by the substituents of the triazolyl isophthalate ligand and choice of the respective copper salt, that is, copper sulfate, selenate, or nitrate.     

Influence of the synthetic conditions on the structural diversity of extended manganese-oxalato-1,2-bis(4-pyridyl)ethylene systems

We report herein the synthesis and physicochemical characterization of eight new manganese-oxalato compounds with 1,2-bis(4-pyridyl)ethylene (bpe): {(Hbpe)(2)[Mn(2)(μ-ox)(3)]·～0.8(C(2)H(5)OH)·～0.4(H(2)O)}(n) (1), {[Mn(μ-ox)(μ-bpe)]·xH(2)O}(n) (2), [Mn(2)(μ-ox)(2)(μ-bpe)(bpe)(2)](n) (3), [Mn(μ-ox)(μ-bpe)](n) (4a and 4b), and {[Mn(4)(μ-ox)(3)(μ-bpe)(4)(H(2)O)(4)]·(X)(2)·mY}(n) with X = NO(3)(-) (5a), Br(-) (5b), and ClO(4)(-) (5c) and Y = solvation molecules. The appropriate selection of the synthetic conditions allowed us to control the crystal structure and to design extended 2D and 3D frameworks. Compound 1 is obtained at acid pH values and its crystal structure consists of stacked [Mn(2)(μ-ox)(3)](2-) layers with cationic Hbpe(+) molecules intercalated among them. Compound 2 was obtained at basic pH values with a manganese/bpe ratio of 1:1, and the resulting 3D structure consists of an interpenetrating framework in which metal-oxalato chains are bridged by bpe ligands, leading to a microporous network that hosts a variable number of water molecules (between 0 and 1) depending on the synthetic conditions. Compound 3, synthesized with a manganese/bpe ratio of 1:3, shows a 2D framework in which linear metal-oxalato chains are joined by bis-monodentate 1,2-bis(4-pyridyl)ethylene ligands. The thermal treatment of compound 3 permits the release of one of the bpe molecules, giving rise to two new 2D crystalline phases of formula [Mn(μ-ox)(μ-bpe)](n) (4a and 4b) depending on the heating rate. The open structures of 5a-5c were synthesized in a medium with a high concentration of nitrate, perchlorate, or bromide salts (potassium or sodium as cations). These anions behave as templating agents directing the crystal growing toward a cationic porous network, in which the anions placed in the voids and channels of the structure present high mobility, as inferred from the ionic exchange experiments. Variable-temperature magnetic susceptibility measurements show an overall antiferromagnetic behavior for all compounds, which are discussed in detail.     

Interaction of ferrocene moieties across a square Pt4 unit: synthesis, characterization, and electrochemical properties of carboxylate-bridged bimetallic Pt4Fe(n) (n = 2, 3, and 4) complexes

Four types of square Pt(4) complexes bearing two or more ferrocenecarboxylate ligands--[Pt(4)(μ-OCOCH(3))(4)(μ-OCOC(5)H(4)FeCp)(4)] (6); [Pt(4)(μ-OCOCH(3))(4)(μ-OCOC(5)H(4)FeCp)(3)(μ-ArNCHNAr)], where ArNCHNAr = N,N'-diarylformamidinate) (7); trans-[Pt(4)(μ-OCOCH(3))(4)(μ-OCOC(5)H(4)FeCp)(2)(μ-ArNCHNAr)(2)] (8); and cis-[Pt(4)(μ-OCOCH(3))(4)(μ-OCOC(5)H(4)FeCp)(2)(κ(4)-N(4)-DArBp)(2)], where DArBp = 1,3-bis(benzamidinato)propane (9)--were successfully prepared via reactions of [FeCp(η(5)-C(5)H(4)COOH)] (5) with the corresponding square Pt(4) complexes, which have labile in-plane acetate ligands. The newly prepared Pt(4) complexes (6-9) with ferrocene moieties as pendants were characterized by nuclear magnetic resonance (NMR) spectroscopy, mass spectroscopy (MS), combustion analyses, and single-crystal X-ray analysis for 6, some of the trans-Pt(4)Fe(2)8, and the cis-Pt(4)Fe(2) complexes 9. Weak interactions between two ferrocene moieties across the Pt(4) core, providing ΔE(1/2) values and K(c) constants, were revealed electrochemically, using cyclic and differential-pulse voltammetry in dichloromethane containing [(n)Bu(4)N][BAr(F)(4)] (where Ar(F) = C(6)H(3)(CF(3))(2)-3,5), which was a better supporting electrolyte for such an interaction than [(n)Bu(4)N][PF(6)].     

Experimental and theoretical Mössbauer study of an extended family of [Fe8(μ4-O)4(μ-4-R-px)12X4] clusters

Six [Fe(8)(μ(4)-O)(4)(μ-4-R-pyrazolato)(12)X(4)] complexes containing an identical Fe(8)(μ(4)-O)(4) core have been structurally characterized and studied by M?ssbauer spectroscopy. In each case, an inner μ(4)-O bridged Fe(III) cubane core is surrounded by four trigonal bipyramidal iron centers, the two distinct sites occurring in a 1:1 ratio. The M?ssbauer spectrum of each of the clusters consists of two quadrupole doublets, which, with one exception (X = NCS, R = H), overlap to give three absorption lines. The systematic variation of X and R causes significant changes in the M?ssbauer spectra. A comparison with values for the same clusters computed using density functional theory allows us to establish an unequivocal assignment of these peaks in terms of a nested model for the overlapping doublets. The changes in M?ssbauer parameters (both experimental and computed) for the 1-electron reduced species [Fe(8)(μ(4)-O)(4)(μ-4-Cl-pyrazolato)(12)Cl(4)](-) are consistent with a redox event that is localized within the cubane core.     

Scandium and yttrium metallocene borohydride complexes: comparisons of (BH4)1- vs. (BPh4)1- coordination and reactivity

The synthetically accessible borohydride complexes (C(5)Me(4)H)(2)Ln(THF)(BH(4)) and (C(5)Me(5))(2)Ln(THF)(BH(4)) (Ln = Sc, Y) were examined as precursors alternative to the heavily-used tetraphenylborate analogs, [(C(5)Me(4)H)(2)Ln][BPh(4)] and [(C(5)Me(5))(2)Ln][BPh(4)], employed in LnA(2)A'/M reduction reactions (A = anion; M = alkali metal) that generate "LnA(2)" reactivity and form reduced dinitrogen complexes [(C(5)R(5))(2)(THF)(x)Ln](2)(μ-η(2):η(2)-N(2)) (x = 0, 1). The crystal structures of the yttrium borohydrides, (C(5)Me(4)H)(2)Y(THF)(μ-H)(3)BH, 1, and (C(5)Me(5))(2)Y(THF)(μ-H)(2)BH(2), 2, were determined for comparison with those of the yttrium tetraphenylborates, [(C(5)Me(4)H)(2)Y][(μ-Ph)(2)BPh(2)], 3, and [(C(5)Me(5))(2)Y][(μ-Ph)(2)BPh(2)], 4. The complex (C(5)Me(4)H)(2)Sc(μ-H)(2)BH(2), 5, was synthesized and structurally characterized for comparison with (C(5)Me(5))(2)Sc(μ-H)(2)BH(2), 6, [(C(5)Me(4)H)(2)Sc][(μ-Ph)BPh(3)], 7, and [(C(5)Me(5))(2)Sc][(μ-Ph)BPh(3)], 8. Structural information was also obtained on the borohydride derivatives, (C(5)Me(4)H)(2)Sc(μ-H)(2)BC(8)H(14), 9, and (C(5)Me(5))(2)Sc(μ-H)(2)BC(8)H(14), 10, obtained from 9-borabicyclo(3.3.1)nonane (9-BBN) and (C(5)Me(4)R)(2)Sc(η(3)-C(3)H(5)), where R = H, 11; Me, 12. The preference of the metals for borohydride over tetraphenylborate binding was shown by the facile displacement of (BPh(4))(1-) in 3, 4, 7, and 8 by (BH(4))(1-) to make the respective borohydride complexes 1, 2, 5, and 6. These results are consistent with the fact that the borohydrides are not as useful as precursors in A(2)LnA'/M reductions of N(2). An unusual structural isomer of [(C(5)Me(4)H)(2)Sc](2)(μ-η(2):η(2)-N(2)), 13', was isolated from this study that shows the variations in ligand orientation that can occur in the solid state.     

One-pot conditional self-assembly of multicopper metallacycles

The self-assembly of supramolecular metallacycles via the coordination-driven directional bonding approach can be modified to produce some unexpected structural variations. The combination of a flexible ligand-capped dinuclear transition-metal acceptor like [Cu(2)(dppm)(2)(NCMe)(2)]X(2) (1X(2); dppm = Ph(2)PCH(2)PPh(2); X(-) = BF(4)(-), PF(6)(-), or BPh(4)(-)) with monodentate-bidentate donors like 2-, 3-, and 4-pyridylcarboxylates produced oligomeric compounds [{Cu(2)(dppm)(2)}(μ-(2-PyCO(2)))](2)X(2) (2X(2)), [{Cu(2)(dppm)(2)}(μ-(3-PyCO(2)))](2)X(2) (3X(2)), and [{Cu(2)(dppm)(2)}(μ-(4-PyCO(2)))](4)X(4) (4X(4)), respectively, as the thermodynamically stable products in one-pot reactions. However, the modified self-assembly is still subject to steric hindrance. The reaction of complex 1(BF(4))(2) with 6-Me-3-PyCO(2)H did not produce a polygonal dimeric metallacycle but a simple dinuclear complex, [Cu(2)(dppm)(2)(6-Me-3-PyCO(2))](BF(4)) (5(BF(4))). The crystal structures of complexes 2(PF(6))(2), 3(PF(6))(2), 4(BF(4))(4), and 5(BF(4)) were determined using X-ray diffraction.     

A series of octanuclear-nickel(II) complexes supported by thiacalix[4]arenes

A series of discrete complexes, [Ni(8)(BTC4A)(2)(μ(6)-CO(3))(2)(μ-CH(3)COO)(4)(dma)(4)]·H(2)O (1), [Ni(8)(BTC4A)(2)(μ(6)-CO(3))(2)(μ-Cl)(2)(μ-HCOO)(2)(dma)(4)]·2DMF·2CH(3)CN (2), [Ni(8)(PTC4A)(2) (μ(6)-CO(3))(2)(μ-CH(3)COO)(4)(dma)(4)]·DMF (3), and [Ni(8)(PTC4A)(2)(μ(6)-CO(3))(2)(μ-OH)(μ-HCOO)(3) (dma)(4)] (4) (p-tert-butylthiacalix[4]arene = H(4)BTC4A, p-phenylthiacalix[4]arene = H(4)PTC4A, dma = dimethylamine, and DMF = N,N'-dimethylformamide), have been prepared under solvothermal conditions and structurally characterized by single-crystal X-ray diffraction analyses, powder XRD, and IR spectroscopy. These four complexes are stacked by dumbbell-like building blocks with one chairlike octanuclear-nickel(II) core, which is capped by two thiacalix[4]arene molecules and connected by two in situ generated carbonato anions and different auxiliary anions. This work implied that not only the solvent molecules but also the upper-rim groups of thiacalix[4]arenes have significant effects on the self-assembly of the dumbbell-like building blocks. The magnetic properties of complexes 1-4 were examined, indicating strong antiferromagnetic interactions between the nickel(II) ions in the temperature range of 50-300 K.     

Self-assembled polymers of silver(I) with a chiral diphosphine ligand

Silver(I) salts, AgX, form self-assembled polymers with the chiral diphosphine ligand R,R-trans-C(6)H(10)(NHCO-2-C(6)H(4)PPh(2))(2), 1, of formula {Ag(2)X(2)(μ-1)}(n) and ring-opening polymerization of the trans chelate complex [Ag(1)]X has given the helical polymer [{Ag(μ-1)}(n)]X(n), when X = CF(3)SO(3).     

Construction of halide-bridged tungsten-copper-sulfide double cubanelike clusters from a new precursor [(Tp*WS2)2(μ-S2)

Treatment of [Et(4)N][Tp*WS(3)] (1) (Tp* = hydridotris(3,5-dimethylpyrazol-1-yl)borate) with 2 equiv of AgSCN in MeCN afforded a novel neutral compound [(Tp*WS(2))(2)(μ-S(2))] (2). Reactions of 2 with excess CuX (X = Cl, Br, I) in MeCN and CH(2)Cl(2) or CHCl(3) formed three neutral W/Cu/S clusters [{Tp*W(μ(3)-S)(3)Cu(3)(μ-Cl)}(2)Cu(μ-Cl)(2)(μ(7)-Cl)(MeCN)](2) (3), [{Tp*W(μ(3)-S)(3)Cu(3)}(2)Br(μ-Br)(2)(μ(4)-Br)(MeCN)] (4), and [{Tp*W(μ(3)-S)(3)Cu(3)}(2){Cu(2)(μ-I)(4)(μ(3)-I)(2)}] (5), respectively. On the other hand, treatment of 2 with CuX (X = Cl, Br) in the presence of Et(4)NX (X = Cl, Br) produced two anionic W/Cu/S clusters [Et(4)N][{Tp*W(μ(3)-S)(3)Cu(3)X}(2)(μ-X)(2)(μ(4)-X)] (6: X = Cl; 7 X = Br). Compounds 2-7 were characterized by elemental analysis, IR, UV-vis, (1)H NMR, electrospray ionization (ESI) mass spectra, and single-crystal X-ray crystallography. The dimeric structure of 2 can be viewed as two [Tp*WS(2)] fragments in which two W atoms are connected by one S(2)(2-) dianion. Compounds 3-7 all possess unique halide-bridged double cubanelike frameworks. For 3, two [Tp*W(μ(3)-S)(3)Cu(3)](2+) dications are linked via a μ(7)-Cl(-) bridge, two μ-Cl(-) bridges, and a [Cu(MeCN)(μ-Cl)(2)](+) bridge. For 4, one [Tp*W(μ(3)-S)(3)Cu(3)(MeCN)](2+) dication and one [Tp*W(μ(3)-S)(3)Cu(3)Br](+) cation are linked via a μ(4)-Br(-) and two μ-Br(-) bridges. For 5, the two [Tp*W(μ(3)-S)(3)Cu(3)](2+) dications are bridged by a linear [(μ-I)(2)Cu(μ(3)-I)(2)Cu(μ-I)(2)](4+) species. For 6 and 7, two [Tp*W(μ(3)-S)(3)Cu(3)X](+) cations are linked by a μ(4)-X(-) and two μ-X(-) bridges (X = Cl, Br). In addition, the third-order nonlinear optical (NLO) properties of 2-7 in MeCN/CH(2)Cl(2) were investigated by using femtosecond degenerate four-wave mixing (DFWM) technique.     

Change of electrical conductivities between hydrated and dehydrated samples of honeycomb sheet structures with mixed oxidation state paddlewheel dirhodium complexes and halide ions

A series of mixed oxidation state compounds, [{Rh(2)(acam)(4)}(3)(μ(3)-X)(2)]·nH(2)O (Hacam = acetamide; X = Cl, n = 4 (1·4H(2)O); X = Br, n = 10 (2·10H(2)O); X = I, n = 10 (3·10H(2)O)) and [{Rh(2)(pram)(4)}(3)(μ(3)-X)(2)]·6H(2)O (Hpram = propionamide; X = Cl (4·6H(2)O), Br (5·6H(2)O), I (6·6H(2)O)) were synthesized and their X-ray structures were determined. In the crystal structure of all of these complexes, dirhodium complexes and halide ions construct 2-D honeycomb sheet arrangements in which the walls consist of Rh(2) units and halide ions lie at the corners. Complexes 1·4H(2)O, 4·6H(2)O, 5·6H(2)O and 6·6H(2)O have three independent Rh(2) units, in which there are two Rh(2)(5+) and one Rh(2)(4+). In these structures, the water molecules hydrogen bond to O atoms and from the N atoms of the amidate ligands. The number of hydrogen bonds from water molecules to the Rh(2)(4+) unit is greater than that to the Rh(2)(5+) units. This suggests that there exists pinning of the oxidation states by water molecules. In the structures of 2·10H(2)O and 3·10H(2)O, all of the Rh(2) units are crystallographically equivalent. In these structures, eight of the 10 water molecules form a honeycomb-like network between the {Rh(2)(acam)(4)}(3)X(2) honeycomb sheets. The former four structures show very low electrical conductivities of ca. 10(-8) S cm(-1) (room temperature, pellets) and the latter structures have the higher values of ca. 10(-4) S cm(-1). In the former complexes, improvement of the values to 10(-6) S cm(-1) was observed, caused by loss of pinning water.     

Influence of the anions on the structure and magnetic properties of a series of bis(μ-diphenoxo)-bridged linear trinuclear copper(II) complexes: an experimental and theoretical study

The reaction of H(2)L (N,N'-dimethyl-N,N'-bis(2-hydroxy-3-methoxy-5-methylbenzyl)-ethylenediamine) with different copper salts, in methanol and using a H(2)L/Cu = 2 : 3 molar ratio, led to four new bis(μ-diphenoxo)-bridged Cu(3) complexes of general formula [{Cu(S)(μ-L)}(2)Cu(H(2)O)(2n)]X(2) (S = CH(3)OH, n = 1 and X = BF(4)(-) for (1) or ClO(4)(-) for (2); S = Br(3)(-) anion and n = 1 without any X species for (3); S = H(2)O, n = 0 and X = NO(3)(-) for (4)). The use in the same reaction conditions of 4,4'-bipyridine (4,4'-bipy) as connector led to the chain complex [{Cu(μ-4,4'-bipy)(0.5)(μ-L)}(2)Cu(H(2)O)(2n)](ClO(4))(2)·17H(2)O (5). The structure of the centrosymmetric trinuclear unit in (1)-(5) consists of two [Cu(L)] fragments connected through two phenoxo bridging groups to the central copper(II) ion giving rise to a linear arrangement of the copper(II) ions, where the ligand acts in a compartmental form wrapping the metal centre with a N(2)O(2) tetradentate bridging mode. The coordination polyhedron of the symmetrically related external copper atoms exhibits a geometry very close to square-pyramidal, whereas the central copper(II) atom displays either a tetragonally elongated octahedral geometry or a square-planar geometry. Owing to the steric hindrance promoted by the methoxy groups at the phenyl rings, the whole Cu(3) structure is not planar but folded along the line connecting the phenoxo bridging oxygen atoms of the same ligand. Temperature dependence of the magnetic susceptibility of complexes (1)-(5) was measured, showing strong antiferromagnetic interactions between the central and external atoms through the bis(μ-phenoxo) groups. DFT calculations were also performed (a) to support the experimental values of the coupling constant (J(1)) between the nearest-neighbouring copper atoms, (b) to determine the magnitude of the interactions between next-nearest copper(II) atoms (J(2)) and (c) to study magneto-structural correlations for this kind of bis(μ-diphenoxo) trinuclear copper(II) complex.     

Reactions of the bis(dialkylphosphino)methane complexes Pd2X2(μ-R2PCH2PR2)2 (X = halogen, R = Me or Et) with H2S, S8, COS, and CS2; detection of reaction intermediates

The Pd(2)X(2)(dmpm)(2) complexes [X = Cl (1a), Br (1b), I (1c); dmpm = bis(dimethylphosphino)methane. In all the dipalladium complexes mentioned in this paper, the dmpm, depm, and dppm ligands (unless stated otherwise) are bridging, but for convenience the μ-symbol is omitted.] react with H(2)S to yield H(2) and the bridged-sulfido complexes Pd(2)X(2)(μ-S)(dmpm)(2) (2a-c), of which 2a and 2b are structurally characterized. With 1a, two rapid reversible equilibria are observed by NMR spectroscopy below -30 °C, and two reaction intermediates are detected; both are likely hydrido(mercapto) species. Reaction of 1a with 1 equiv of elemental sulfur also yields 2a. The reaction of 1a with COS results in the initial formation of Pd(2)Cl(2)(μ-COS)(dmpm)(2) (3) that undergoes decarbonylation to yield 2a and Pd(2)Cl(2)(μ-CO)(dmpm)(2) (4), which is also formed via reversible insertion of the CO into the Pd-Pd bond of 1a. The solid-state molecular structure of the previously reported complex Pd(2)Cl(2)(μ-CS(2))(dmpm)(2) (5), together with solution NMR data for 3 and 5, reveal that the bridging heterocumulene ligands coordinate in an η(2)-C,S fashion. Analogous findings were made for the corresponding Pd(2)X(2)(depm)(2) complexes [X = Cl (1a'), Br (1b'), I (1c'); depm = bis(diethylphosphino)methane], although no μ-COS species was detected. The Pd(2)X(2)(μ-S)(depm)(2) complex was structurally characterized. Differences in the chemistry of the previously studied, corresponding dppm systems (dppm = bis(diphenylphosphino)methane) are discussed.     

Series of comparable dinuclear group 4 neo-pentoxide precursors for production of pH dependent group 4 nanoceramic morphologies

A series of similarly structured Group 4 alkoxides was used to explore the cation effect on the final ceramic nanomaterials generated under different pH solvothermal (SOLVO) conditions. The synthesis of [Ti(μ-ONep)(ONep)(3)](2) (1, ONep = OCH(2)C(CH(3))(3)) and {[H][(μ-ONep)(3)M(2)(ONep)(5)(OBu(t))]} where M = Zr (2) and Hf (3, OBu(t) = OC(CH(3))(3)) were realized from the reaction of M(OBu(t))(4) (M = Ti, Zr, Hf) and H-ONep. Crystallization of 1 from py led to the isolation of [Ti(μ-ONep)(ONep)(3)](2)(μ-py) (1a) whereas the dissolution of 2 or 3 in py yielded {(μ(3)-O)(μ(3)-OBu(t))[(μ-ONep)M(ONep)(2)](3)} M = Zr (2a) and Hf (3a). The structurally similar congener set of 1-3 was used to investigate variations of their resultant nanomaterials under solvothermal conditions at high (10 M KOH), low (conc. (aq) HI), and neutral (H(2)O) pH conditions. Reproducible nanodots, -squares, and -rods of varied aspect ratios were isolated based on cation and the reaction pH. The hydrolysis products were reasoned to be the "seed" nucleation sites in these processes, and studying the hydrolysis behavior of 1-3 led to the identification of [Ti(6)(μ(3)-O)(7)(μ-O)(μ-ONep)(2)(ONep)(6)](2) (1b) for 1 but yielded 2a and 3a for 2 and 3, respectively. A correlation was found to exist between these products and the final nanomaterials formed for the acidic and neutral processes. The basic route appears to be further influenced by another property, possibly associated with the solubility of the final nanoceramic material.     

TeX(4) (X = F, Cl, Br) as Lewis acids - complexes with soft thio- and seleno-ether ligands

TeF(4) reacts with OPR(3) (R = Me or Ph) in anhydrous CH(2)Cl(2) to give the colourless, square based pyramidal 1?:?1 complexes [TeF(4)(OPR(3))] only, in which the OPR(3) is coordinated basally in the solid state, (R = Me: d(Te-O) = 2.122(2) ?; R = Ph: d(Te-O) = 2.1849(14) ?). Variable temperature (19)F{(1)H}, (31)P{(1)H} and (125)Te{(1)H} NMR spectroscopic studies strongly suggest this is the low temperature structure in solution, although the systems are dynamic. The much softer donor ligands SMe(2) and SeMe(2) show a lower affinity for TeF(4), although unstable, yellow products with spectroscopic features consistent with [TeF(4)(EMe(2))] are obtained by the reaction of TeF(4) in neat SMe(2) or via reaction in CH(2)Cl(2) with SeMe(2). TeX(4) (X = F, Cl or Br) causes oxidation and halogenation of TeMe(2) to form X(2)TeMe(2). The Br(2)TeMe(2) hydrolyses in trace moisture to form [BrMe(2)Te-O-TeMe(2)Br], the crystal structure of which has been determined. TeX(4) (X = Cl or Br) react with the selenoethers SeMe(2), MeSe(CH(2))(3)SeMe or o-C(6)H(4)(SeMe)(2) (X = Cl) in anhydrous CH(2)Cl(2) to give the distorted octahedral monomers trans-[TeX(4)(SeMe(2))(2)], cis-[TeX(4){MeSe(CH(2))(3)SeMe}] and cis-[TeCl(4){o-C(6)H(4)(SeMe)(2)}], which have been characterised by IR, Raman and multinuclear NMR ((1)H, (77)Se{(1)H} and (125)Te{(1)H}) spectroscopy, and via X-ray structure determinations of representative examples. Tetrahydrothiophene (tht) can form both 1?:?1 and 1?:?2 Te?:?L complexes. For X = Br, the former has been shown to be a Br-bridged dimer, [Br(3)(tht)Te(μ-Br)(2)TeBr(3)(tht)], by crystallography with the tht ligands anti, whereas the latter are trans-octahedral monomers. Like its selenoether analogue, MeS(CH(2))(3)SMe forms distorted octahedral cis-chelates, [TeX(4){MeS(CH(2))(3)SMe}], whereas the more rigid o-C(6)H(4)(SMe)(2) unexpectedly forms a zig-zag chain polymer in the solid state, [TeCl(4){o-C(6)H(4)(SMe)(2)}](n), in which the dithioether adopts an extremely unusual bridging mode. This is in contrast to the chelating monomer, cis-[TeCl(4){o-C(6)H(4)(SeMe)(2)}], formed with the analogous selenoether and may be attributed to small differences in the ligand chelate bite angles. The wider bite angle xylyl-linked bidentates, o-C(6)H(4)(CH(2)EMe(2))(2) behave differently; the thioether forms cis-chelated [TeX(4){o-C(6)H(4)(CH(2)SMe)(2)}] confirmed crystallographically, whereas the selenoether undergoes C-Se cleavage and rearrangement on treatment with TeX(4), forming the cyclic selenonium salts, [C(9)H(11)Se](2)[TeX(6)]. The tetrathiamacrocycle, [14]aneS(4) (1,4,8,11-tetrathiacyclotetradecane), does not react cleanly with TeCl(4), but forms the very poorly soluble [TeCl(4)([14]aneS(4))](n), shown by crystallography to be a zig-zag polymer with exo-coordinated [14]aneS(4) units linked via alternate S atoms to a cis-TeCl(4) unit. Trends in the (125)Te{(1)H} NMR shifts for this series of Te(iv) halides chalcogenoether complexes are discussed.     

Reaction of a heterotopic P,SAs ligand with group 10 metal(II) complexes: As-S bond cleavage and the formation of two unusual trinuclear structural isomers for Pd and Pt

The synthesis of the heterotopic P,SAs ligand, 1-Ph(2)AsSC(6)H(4)-2-PPh(2) (1) and its reaction with [PdCl(2)(cod)], [PtI(2)(cod)] (cod = 1,5-cyclooctadiene) and NiCl(2)·6H(2)O is reported. Cleavage of the As-S bond of 1 and coordination of the resulting phosphanylthiolato ligand (SC(6)H(4)-2-PPh(2))(-) (SC(6)H(4)-2-PPh(2) = P,S) was observed with formation of [M(P,S)(2)] (M = Ni, Pd, Pt). In the case of Pd and Pt, not only the mononuclear complexes [M(P,S)(2)] formed, but also the trimers of [MX(P,S)] ([MX{(μ-S-SC(6)H(4)-2-PPh(2))-κ(2)S,P}](3) [M = Pd, X = Cl (2) and M = Pt, X = I (4)]). Formation of 2 and 4 was preceded by the trinuclear isomeric intermediates [(cis-M{(μ-S-SC(6)H(4)-2-PPh(2))-κ(2)S,P}(2))-MX(2)-MX{(μ-S-SC(6)H(4)-2-PPh(2))-κ(2)S,P}] [M = Pd, X = Cl (3) and M = Pt, X = I (5)]. The crystal structures of 1-5 and a possible reaction mechanism that leads to 2 and 4 are presented.     

Synthesis and structure of a bismuth(III)/chromium(VI) oxo cluster containing a Bi4Cr4O12 core

Bismuth(III) compounds containing the Kl?ui's oxygen tripodal ligand [CpCo{P(O)(OEt)(2)}(3)](-) (L(OEt)(-)) have been synthesized, and their interactions with dichromate in aqueous media were studied. The treatment of Bi(5)O(OH)(9)(NO(3))(4) with NaL(OEt) in water afforded [L(OEt)Bi(NO(3))(2)](2) (1), whereas that of BiCl(3) with NaL(OEt) in CH(2)Cl(2) yielded L(OEt)BiCl(2) (2). Chloride abstraction of 2 with AgX afforded [L(OEt)BiX(2)](2) [X(-) = triflate (OTf(-)) (3), tosylate (OTs(-)) (4)]. In aqueous solutions at pH > 4, 4 underwent ligand redistribution to give the bis(tripod) complex [(L(OEt))(2)Bi(H(2)O)][OTs] (5). The treatment of 4 with Na(2)Cr(2)O(7) in acetone/water afforded the Bi(III)/Cr(VI) oxo cluster [(L(OEt))(4)Bi(4)(μ(3)-CrO(4))(2)(μ(3)-Cr(2)O(7))(2)] (6) containing a unique Bi(4)Cr(4)O(12) oxometallic core. Compound 6 oxidized benzyl alcohol to give ca. 6 equiv of benzaldehyde. The reaction between 2 and CrO(3) yielded [L(OEt)Bi(OCrO(2)Cl)](2)(μ-Cl)(2) (7). The crystal structures of complexes 4-7 have been determined.     

Ln4(CH2)4 cubane-type rare-earth methylidene complexes consisting of "(C5Me4SiMe3)LnCH2" units (Ln = Tm, Lu)

Tetranuclear cubane-type rare-earth methylidene complexes consisting of four "Cp'LnCH(2)" units, [Cp'Ln(μ(3)-CH(2))](4) (4-Ln; Ln = Tm, Lu; Cp' = C(5)Me(4)SiMe(3)), have been obtained for the first time through CH(4) elimination from the well-defined polymethyl complexes [Cp'Ln(μ(2)-CH(3))(2)](3) (2-Ln) or mixed methyl/methylidene precursors such as [Cp'(3)Ln(3)(μ(2)-Me)(3)(μ(3)-Me)(μ(3)-CH(2))] (3-Ln). The reaction of the methylidene complex 4-Lu with benzophenone leads to C═O bond cleavage and C═C bond formation to give the cubane-type oxo complex [Cp'Lu(μ(3)-O)](4) and CH(2)═CPh(2), while the methyl/methylidene complex 3-Tm undergoes sequential methylidene addition to the C═O group and ortho C-H activation of the two phenyl groups of benzophenone to afford the bis(benzo-1,2-diyl)ethoxy-chelated trinuclear complex [Cp'(3)Tm(3)(μ(2)-Me)(3){(C(6)H(4))(2)C(O)Me}] (6-Tm).     

Multicomponent assembly of anionic and neutral decanuclear copper(II) phosphonate cages

A multicomponent synthetic strategy involving copper(II) ions, tert-butylphosphonic acid (t-BuPO(3)H(2)) and 3-substituted pyrazole ligands has been adopted for the synthesis of soluble molecular copper(II) phosphonates. The use of six different 3-substituted pyrazoles, 3-R-PzH [R = H, Me, CF(3), Ph, 2-pyridyl (2-Py), and 2-methoxyphenyl (2-MeO-C(6)H(4))] as ancillary ligands afforded nine different decanuclear cages, [Cu(5)(μ(3)-OH)(2)(O(3)P-t-Bu)(3)(3-R-Pz)(2)(X)(2)](2)·(Y) where R = H, X = t-BuPO(3)H, and Y = (Et(3)NH(+))(4)(solvent) (1); R = Me, X = 3-MePzH, and Y = solvent (2); R = Me, X = t-BuPO(3)H, and Y = (Et(3)NH(+))(4)(solvent) (3); R = CF(3), X = t-BuPO(3)H, and Y = (Et(3)NH(+))(4)(solvent) (4); R = Ph, X = 3-PhPzH, and Y = solvent (5); R = 2-Py, X = 0.5 MeOH, and Y = solvent (6); R = 2-Py, X = none, and Y = solvent (7); R = 2-Py, X = H(2)O, and Y = (Et(3)NH(+)·PF(6)(-))(2)(solvent) (8); R = 2-MeO-C(6)H(4), X = MeOH or 0.5:0.5 MeOH/H(2)O, and Y = solvent (9). Compounds 1-6, 8, and 9 were isolated using a direct synthetic method which involves the reaction of copper(II) salts and the ligands, while 7 was obtained from an indirect route involving the reaction of preformed copper-pyridylpyrazolate precursor complexes and t-BuPO(3)H(2). The decametallic compounds 1-9 possess a butterfly shaped core. The core of the cages 1, 3, and 4 are tetraanionic and contain more phosphonates than pyrazole ligands, while the other cages are neutral and contain more pyrazoles than phosphonate ligands. Compounds 1-6 have been studied by electrospray ionization-high-resolution mass spectrometry (ESI-HRMS). The decanuclear cage 6 was shown to be a good plasmid modifier.     

Assembly of bicyclic or monocyclic clusters from [(η5-C5Me5)2Mo2(μ3-S)4(CuMeCN)2]2+ with tetraphosphine or N,P mixed ligands: syntheses, structures and enhanced third-order NLO performances

Reactions of the preformed cluster [(η(5)-C(5)Me(5))(2)Mo(2)(μ(3)-S)(4)Cu(2)(MeCN)(2)](ClO(4))(2) (1) with two tetraphosphine ligands, 1,4-N,N,N',N'-tetra(diphenylphosphanylmethyl)benzene diamine (dpppda) and N,N,N',N'-tetra(diphenylphosphanylmethyl)ethylene diamine (dppeda), produced two bicyclic clusters {[(η(5)-C(5)Me(5))(2)Mo(2)(μ(3)-S)(4)Cu(2)](2)(L)}(ClO(4))(4) (3: L = dpppda; 4: L = dppeda). Analogous reactions of 1 or [(η(5)-C(5)Me(5))(2)Mo(2)(μ(3)-S)(4)Cu(2)(MeCN)(2)](PF(6))(2) (2) with two N,P mixed ligands, N,N-bi(diphenylphosphanylmethyl)-2-aminopyridine (bdppmapy) and N-diphenylphosphanylmethyl-4-aminopyridine (dppmapy), afforded two monocyclic clusters {[(η(5)-C(5)Me(5))(2)Mo(2)(μ(3)-S)(4)Cu(2)](2)(L)(2)}X(4) (5: L = bdppmapy, X = ClO(4); 6: L = dppmapy, X = PF(6)). Compounds 3-6 were fully characterized by elemental analysis, IR spectra, UV-vis spectra, (1)H and (31)P{(1)H} NMR spectra, ESI-MS and single-crystal X-ray crystallography. In the tetracations of 3-6, two cubane-like [Mo(2)(μ(3)-S)(4)Cu(2)] cores are linked either by one dpppda or dppeda bridge to form a bicyclic structure or by a pair of bdppmapy or dppmapy bridges to afford a monocyclic structure. The third-order nonlinear optical (NLO) properties of 1 and 3-6 in MeCN were also investigated by femtosecond degenerate four-wave mixing (DFWM) technique with a 50 fs pulse width at 800 nm. Compounds 3-6 exhibited enhanced third-order NLO performances relative to that of 1.