New Principles for Glycoside‐Bond Formation

Meeting the demand for sugars : The importance of oligosaccharides and glycoconjugates in biological systems has stimulated a need to access significant amounts of these compounds. Much effort has been devoted to the stereoselective generation of the key glycosidic bond, both between carbohydrate residues (see scheme) and to the aglycone. Various methodologies are now available for the efficient synthesis of structurally defined complex oligosaccharides and glycoconjugates.

     

液相组合合成研究进展

综述了近年来液相组合合成的研究进展,主要包括液相组合合成法(LPCS),氟合成,树状载体组合合成及高分子辅助试剂在液相组合合成中的应用等。     

From solution-phase to solid-phase enyne metathesis: crossover in the relative performance of two commonly used ruthenium pre-catalysts

A crossover in the ability of two distinct ruthenium-based metathesis pre-catalysts to effect the synthesis of dialkenylboronic esters in solution and on the solid-phase was observed. Specifically, while the Grubbs 2nd generation pre-catalyst 3 affords a greater degree of conversion to product than the Hoveyda-Grubbs pre-catalyst 2 in a solution-phase enyne-metathesis reaction, this trend is reversed in the solid-phase variant. Systematic investigation showed this trend to be general, regardless of variations in the homoallylic alcohol and alkynylboronic ester components of the reaction, as well as in the type of solid support employed. Experiments to determine a mechanistic hypothesis for this trend highlighted the significance of the ruthenium remaining bound to the substrate after metathetic rearrangement and found the presence of phosphine ligand to be detrimental to the success of the solid-phase reaction. Therefore, these results suggest an expanded role for phosphine-free pre-catalysts, such as 2, in challenging solid-phase metathesis reactions.     

Efficient synthesis of protein-drug conjugates using a functionalizable recombinant elastin-mimetic polypeptide

This report describes the efficient conjugation of doxorubicin-glycine-phenylalanine-leucine-glycine (1a) and rhodamine-glycine-phenylalanine-leucine-glycine (1b) units to a monodisperse elastin-mimetic polypeptide (EMM)(7) bearing eight primary amine groups for chemical attachment. The synthetic approach is based on the solid-phase synthesis of 1a and 1b followed by chemical conjugation to the elastin-mimetic polypeptide in the presence of HOBt/PyBob as activating agents to form the polypeptide conjugates 2a and 2b. Conjugation efficiency was 61.2% (4.9 doxorubicin units per polypeptide chain) for 2a and 53.7% (4.3 rhodamine units per polypeptide chain) for 2b, demonstrating the feasibility of using these tailor-made, recombinant polypeptides as potential drug carriers for cancer therapy.     

Synthesis of functionalized rab GTPases by a combination of solution- or solid-phase lipopeptide synthesis with expressed protein ligation

Prenylated proteins with non-native functionalities are generally very difficult to obtain by recombinant or enzymatic means. The semisynthesis of preparative amounts of prenylated Rab guanosine triphosphatases (GTPases) from recombinant proteins and synthetic prenylated peptides depends largely on the availability of functionalised prenylated peptides corresponding to the proteins' native structure or modifications thereof. Here, we describe and compare solution-phase and solid-phase strategies for the generation of peptides corresponding to the prenylated C terminus of Rab7 GTPase. The solid-phase with utilisation of a hydrazide linker emerges as the more favourable approach. It allows a fast and practical synthesis of pure peptides and gives a high degree of flexibility in their modification. To facilitate the analysis of semisynthetic proteins, the synthesised peptides were equipped with a fluorescent group. Using the described approach, we introduced fluorophores at several different positions of the Rab7 C terminus. The position of the incorporated fluorescent groups in the peptides did not influence the protein-ligation reaction, as the generated peptides could be ligated onto thioester-tagged Rab7. However, it was found that the positioning of the fluorescent group had an influence on the functionality of the Rab7 proteins; analysis of the interaction of the semisynthetic Rab7 proteins with REP (Rab escort protein) and GDI (guanosine diphosphate dissociation inhibitor) molecules revealed that modification of the peptide side chains or of the C-terminal isoprenoid did not significantly interfere with complex formation. However, functionalisation of the C terminus was found to have an adverse effect on complex formation and stability, possibly reflecting low structural flexibility of the Rab GDI/REP molecules in the vicinity of the lipid-binding site.     

Polypeptoids by Living Ring‐Opening Polymerization of N‐Substituted N‐Carboxyanhydrides from Solid Supports

The nucleophilic living ring‐opening polymerization of N‐substituted glycine N‐carboxyanhydrides using solid‐phase synthesis resins is reported. By variation of experimental parameters, products with near Poisson distributions are obtained. As opposed to reversible deactivation radical polymerization, the living polymerization is demonstrated to be viable to high monomer conversion and through multiple monomer addition steps. Successful preparation of a multiblock copolypeptoid is proof for a highly living and robust character of the solid‐phase peptoid polymerization.

     

Solid-phase synthesis of DOTA-peptides

A general synthetic route to two DOTA-linked N-Fmoc amino acids (DOTA-F and DOTA-K) is described that allows insertion of DOTA at any endo-position within a peptide sequence. Three model pentapeptides were prepared to test the general utility of these derivatives in solid-phase peptide synthesis. Both DOTA derivatives reacted smoothly by means of standard HBTU activation chemistry to the point of insertion of the DOTA amino acid, but extension of the peptide chain beyond the DOTA-amino acid insertion required the use of pre-activated C-pentafluorophenyl ester N-alpha-Fmoc amino acids. Three Gal-80 binding peptides (12-mers) were then prepared by using this methodology with DOTA positioned either at the N terminus or at one of two different internal positions;the binding of the resulting GdDOTA-12-mers to Gal-80 were compared. The methodology described here allows versatile, controlled introduction of DOTA into any location within a peptide sequence. This provides a potential method for the screening of libraries of DOTA-linked peptides for optimal targeting properties.     

Automated solid-phase synthesis of protected oligosaccharides containing beta-mannosidic linkages

For automated oligosaccharide synthesis to impact glycobiology, synthetic access to most carbohydrates has to become efficient and routine. Methods to install "difficult" glycosidic linkages have to be established and incorporated into the overall synthetic concept. Described here is the first automated solid-phase synthesis of oligosaccharides containing the challenging beta-mannosidic linkage. Carboxybenzyl mannoside building blocks proved effective beta-mannosylation agents and resulted in excellent conversion and good to moderate selectivities. [(Triisopropylsilyl)oxy]-methyl ether (Tom), served as an orthogonal, minimally intrusive, and readily cleavable protecting group for the elongation of the C3 position of mannose. The desired oligosaccharide products were readily separated from by-products containing unwanted stereoisomers using reverse-phase HPLC. The methods described here expand the scope of carbohydrates currently accessible by automation as many oligosaccharides of biological interest contain beta-mannosidic linkages.     

Solid-phase synthesis of transition-metal complexes

This overview highlights recent progress in the field of selective construction of linear, oligonuclear transition-metal complexes by using solid-phase synthesis procedures. Two general protocols have been identified: formation of coordinative bonds between metal centres and bridging ligands and formation of covalent bonds between preformed kinetically inert transition-metal-containing building blocks in the chain growth step. Currently available suitable building blocks for the second approach are based on ferrocene units, bis(terpyridine)-ruthenium(II) moieties or metal porphyrins.     

Solution- and solid-phase synthesis of radicicol (monorden) and pochonin C

A modular synthesis for pochonin C and radicicol is reported. The two natural products were prepared in seven and eight steps, respectively, from three readily available fragments. Alternative syntheses of these compounds were achieved using a combination of polymer-bound reagents and solid phase reactions. The conformation of the two natural products was studied and compared by using 2D NMR spectroscopy.     

The (2-phenyl-2-trimethylsilyl)ethyl-(PTMSEL)-linker in the synthesis of glycopeptide partial structures of complex cell surface glycoproteins

The (2-phenyl-2-trimethylsilyl)ethyl-(PTMSEL) linker represents a novel fluoride-sensitive anchor for the solid-phase synthesis of protected peptides and glycopeptides. Its cleavage is achieved under almost neutral conditions using tetrabutylammonium fluoride trihydrate in dichloromethane thus allowing the construction of complex molecules sensitive to basic and acidic media commonly required for the cleavage of standard linker systems. The advantages of the PTMSEL linker are demonstrated in the synthesis of glycopeptides from the liver intestine (LI)-cadherin and the mucin MUC1, bearing carbohydrate moieties such as N-linked chitobiose or O-linked sialyl-T(N)-residues. The synthesis of these types of glycopeptides is difficult because they are prone to secondary structure formation during the synthesis on the solid phase as well as in the completely deprotected form. Using the PTMSEL linker these molecules are accessible by automated synthesis according to the Fmoc strategy without frequently observed side reactions such as aspartimide or diketopiperazine formation.     

Biology-oriented synthesis of stereochemically diverse natural-product-derived compound collections by iterative allylations on a solid support

A strategy aiming at the introduction of stereocenters into polymer-bound natural-product-derived and -inspired compound collections is presented. Treatment of immobilized aldehydes with Brown's pinene-derived allylboranes results in the stereoselective formation of homoallylic alcohols with up to 89 % ee (ee=enantiomeric excess). Subsequent iterative ozonolysis-allylation sequences with up to three allylations on a solid support give access to 1,3-polyols with different relative configurations. Esterification with acryloyl chloride and final ring-closing metathesis yields alpha,beta-unsaturated delta-lactones with multiply oxygenated side chains, a substructure found in a group of natural products with a broad range of biological activity. The flexibility of the approach is exemplified by the parallel synthesis of all eight diastereomers of cryptocarya diacetate on a solid support. The individual isomers are obtained in overall yields of 40-60 % over 10 steps and with 63-85 % diastereoselectivity for the major isomer.