Palladium-catalyzed coupling reactions of tetrafluoroethylene with arylzinc compounds

Organofluorine compounds are widely used in all aspects of the chemical industry. Although tetrafluoroethylene (TFE) is an example of an economical bulk organofluorine feedstock, the use of TFE is mostly limited to the production of poly(tetrafluoroethylene) and copolymers with other alkenes. Furthermore, no catalytic transformation of TFE that involves carbon-fluorine bond activation has been reported to date. We herein report the first example of a palladium-catalyzed coupling reaction of TFE with arylzinc reagents in the presence of lithium iodide, giving α,β,β-trifluorostyrene derivatives in excellent yields.     

19F- and 1H-NMR spectra of tetrafluoroethylene–propylene copolymers

High resolution 94-MHz ¹⁹F- and 100-MHz ¹H-NMR spectra were measured on a series of tetrafluoroethylene (TFE)-propylene (P) copolymers having a range of composition (TFE/P molar ratio = 37/63–55/45) and polymerized at different temperatures (?23, 25 and 65°C). The spectra were analyzed in relation to copolymer compositions. The assignment of ¹⁹F resonance in terms of tetrads proposed previously was confirmed, and the tentative assignment of ¹H resonances was proposed in terms of triads. The spectra thus interpreted revealed the sequence distribution of the copolymers. Copolymer compositions calculated from NMR spectra and elemental analysis agreed rather well with each other. Monomer reactivity ratios were calculated from the sequence distributions and compared with those obtained from the elemental analysis. It was observed that highly alternating copolymers are obtained in this system over a wide range of monomer composition at lower temperatures and that a deviation from alternancy increases slightly with rising polymerization temperature.     

VDF/TFE/PMVE三元共聚物的结构与性能研究

控制不同单体的起始组成合成了一系列偏氟乙烯 (VDF) 四氟乙烯 (TFE) 全氟甲基乙烯基醚 (PMVE)三元共聚物 ,通过1 9F NMR测定了这类三元共聚物的组成 ,结果与按竞聚率的计算结果吻合 .进一步分别用DSC和WAXD表征了玻璃化温度和结晶度 ,实验结果发现用这类三元共聚物制成的硫化胶的性能与其组成和微观结构密切相关     

The use of NMR for determination of new structures in irradiated TFE/PMVE fluoropolymers

The radiation chemistry of two TFE/PMVE copolymers with TFE mole fractions of 0.66 and 0.81 has been studied under vacuum using ⁶⁰Co γ-radiation over absorbed dose ranges up to 4.2 MGy. The radiolysis temperature was 313 K for both TFE/PMVE copolymers. New structure formation in the copolymers was identified by solid-state ¹⁹F NMR and the G-values for new chain ends of 2.1 and 0.5 and for branching sites of 0.9 and 0.2 have been obtained for the TFE/PMVE with TFE mole fractions of 0.66 and 0.81, respectively. The relative yields of –O–CF₃ and –CF₂–CF₃ chain ends were found to be proportional to the copolymer composition, but the yields of the –CF₂–CF₃ chain ends and –CF– branch points were not linearly related to the composition, rather they were correlated with the radical yields measured at 77 K.     

Radiation-induced terpolymerization of methyl α,β,β-trifluoroacrylate with tetrafluoroethylene and α-olefin

Radiation-induced terpolymerizations of methyl α,β,β-trifluoroacrylate (MTFA) with tetrafluoroethylene (TFE) and α-olefins, such as ethylene, propylene, and isobutylene, were carried out in bulk at 25°C for the purpose of controlling the content of ester group in the MTFA-α-olefin alternating copolymers. These monomers polymerized to form alternating terpolymers which contained 50 mole % α-olefin in a wide range of monomer composition. The content of MTFA, namely, the ester group in polymer, can be varied without destruction of the alternating structures between fluoroolefins (MTFA, TFE) and α-olefin by changing the MTFA/TFE ratio in the monomer mixture. The relative reactivities of MTFA and TFE in the terpolymerization were discussed according to kinetic treatments by free propagating and complex mechanisms. The relation between the MTFA/TFE ratio in the monomer mixture and that in terpolymer was explained favourbly by the complex mechanism. It was also concluded that the relative reactivity of MTFA is larger than that of TFE in the terpolymerizations.     

Study of synthesis and properties of tetrafluoroethylene–propylene copolymers

Bulk copolymerization of tetrafluoroethylene (TFE) with propylene (P) initiated by tert-butyl peroxybenzoate (TBPB) in the temperature interval 323–363 K, monomer pressure from 2 to 9 MPa, and TFE and P molar ratio from 20/80 to 90/10 was carried out. The effect of these reaction conditions on the yield, molecular weight, and polymer composition of the copolymer synthesized was studied. Rubber-like alternating copolymers in a wide range of monomer compositions of TFE and P (from 40 to 80 mol %) were obtained. The reaction proceeds in a stationary state without an induction period. Monomolecular chain transfer reaction (C_p = 5 × 10^?4) to propylene takes place. The relative reactivity ratio of P and TFE (0.15 and 0.01, respectively) and apparent activation energy E_α = 75.8 kJ/mol of the reaction were determined.     

四氟乙烯/偏氟乙烯乳液共聚反应的竞聚率测定

用亨利定律关联了四氟乙烯 (TFE) /偏氟乙烯 (VDF)乳液共聚合体系中的单体气相分压与其对应液相浓度间的关系 ,推导了用气相摩尔分数表示的共聚物组成方程式 .通过气相色谱和19F NMR分别测定了共聚反应前后气相单体组成和共聚物组成 ,用非线性回归法 (RREVM )计算TFE/VDF乳液共聚合反应表观竞聚率分别为γTFE=0 35和γVDF=0 6 3 .将实测的表观竞聚率代入共聚物组成方程计算共聚物组成与由19F NMR测定的结果一致 ,为进一步的工业放大试验提供科学依据     

Phase behavior study of poly(N‐tertbutylacrylamide‐co‐acrylamide) in the mixture of water–methanol: The role of polymer–nonsolvent second‐order interactions

The phase behavior of poly(N‐tertbutylacrylamide‐co‐acrylamide) (PNTBAM) in pure water and mixture of water–methanol is studied at different temperatures. The different compositions of PNTBAM are prepared by free‐radical polymerization technique and their phase behavior is studied by turbidimetry. The effects of copolymer and solvent composition on the phase behavior of the copolymers are discussed. It has been suggested that the inhomogenities in polymer chains are responsible for lowering the rate of phase transition by increasing the N‐tertbutylacrylamide (NTBAM) and methanol contents in copolymer and mixture, respectively. For the first time we have revealed that there are second‐order binary interactions in the water–methanol which are dominant in the special range of copolymer composition. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 455–462, 2009     

γ-Rays-induced synthesis of hydrogels of vinyl ethers with stimuli-sensitive behavior

γ-Radiation method was applied to synthesize novel water-soluble and water-swelling polymers. Vinyl ether of ethylene glycol (VEEG), vinyl butyl (VBE) and vinyl isobutyl (VIBE) ethers were used as monomers. The synthesis of VEEG–VBE and VEEG–VIBE copolymers was carried out in a wide range of feed composition and absorbed dose. It was found that the hydrophobic–hydrophilic balance of the copolymers could be delicately varied by the copolymer composition as well as by the chemical structure of the alkyl substitute in the hydrophobic moiety. The copolymers exhibit thermo-sensitive behavior in water solutions. The value of transition temperature is considerably decreased at a higher concentration of the hydrophobic component in the copolymer composition.     

Submillimeter infrared absorption and chain conformations of poly(vinylidene fluoride) and copolymers. II. Phase transition analysis

Absorption spectra, and hence the dielectric properties, of poly(vinylidene fluoride-tri-fluoroethylene) copolymers have been obtained by far infrared spectroscopy in the frequency range 15–55 cm^?1. We have studied the evolutions of the absorption coefficient and imaginary part of the dielectric constant as a function of poling field and copolymer composition. During the phase transition from form II to form I, the whole absorption presents a strong increase. This behavior is explained by polarizability changes at phase transition.     

Bicomponent Block Copolymers Derived from One or More Random Copolymers as an Alternative Route to Controllable Phase Behavior

Block copolymers have been extensively studied due to their ability to spontaneously self‐organize into a wide variety of morphologies that are valuable in energy‐, medical‐, and conservation‐related (nano)technologies. While the phase behavior of bicomponent diblock and triblock copolymers is conventionally governed by temperature and individual block masses, it is demonstrated here that their phase behavior can alternatively be controlled through the use of blocks with random monomer sequencing. Block random copolymers (BRCs), i.e., diblock copolymers wherein one or both blocks are a random copolymer comprised of A and B repeat units, have been synthesized, and their phase behavior, expressed in terms of the order–disorder transition (ODT), has been investigated. The results establish that, depending on the block composition contrast and molecular weight, BRCs can microphase‐separate. We also report that large variation in incompatibility can be generated at relatively constant molecular weight and temperature with these new soft materials. This sequence‐controlled synthetic strategy is extended to thermoplastic elastomeric triblock copolymers differing in chemistry and possessing a random‐copolymer midblock.     

Absorption of polymers at the solution–solid interface. XII. Stabilization of dispersed silica by absorbed styrene–methyl methacrylate copolymers

The ability of styrene–methyl methacrylate copolymers to stabilize silica dispersions has been investigated. Random, block, and graft copolymers covering the entire composition range have been employed in carbon tetrachloride, trichloroethylene, and benzene solutions. Equilibrium sediment volumes and dispersion turbidities provide adequate and concordant estimates of stabilization efficiency. Polystyrene is not adsorbed by precipitated silica from trichloroethylene or benzene and does not stabilize dispersions in these liquids; although adsorbed from carbon tetrachloride, there is no stabilization. Poly(methyl methacrylate) is an efficient dispersion stabilizer, and its performance is independent of molecular weight over a wide range. Random copolymers having styrene contents in excess of ca. 60% do not stabilize in trichloroethylene but do so in carbon tetrachloride, although well adsorbed in both cases. With this major exception, and that of a low-styrene graft copolymer in carbon tetrachloride, copolymers of all structures and compositions stabilize well, better than poly(methyl methacrylate) in the solvents examined. A substantial degree of surface coverage is necessary for optimum stabilization. Subsidiary solution adsorption and layer thickness measurements are also reported.     

Cocrystallization phenomena in novel poly(diethylene terephthalate‐co‐thiodiethylene terephthalate) copolyesters

Poly(diethylene terephthalate‐co‐thiodiethylene terephthalate) (PDET/TDET) copolymers of various compositions were synthesized and characterized in terms of chemical structure and molecular weight. The thermal behavior was examined by thermogravimetric analysis and differential scanning calorimetry. All the polymers showed a good thermal stability. At room temperature they appeared as semicrystalline materials: the main effect of copolymerization was a lowering in the amount of crystallinity and a decrease of melting temperature with respect to homopolymers. WAXD measurements indicated that cocrystallization occurs over an extended composition range and three different crystalline phases have been identified. In particular, the applicability of Wendling–Suter's equation has been checked for the PDET/TDET copolymers with TDET unit content ranging from 60 to 90 mol %. Amorphous samples were obtained after melt quenching and a decrease of T_g as the content of TDET units is increased was observed. This behavior was explained as due to the presence of flexible C? S? C bonds in the polymeric chain. Lastly, the Fox equation well described T_g‐composition data. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1562–1571, 2006     

Effect of random and block copolymer additives on a homopolymer blend studied by small-angle neutron scattering

Small-angle neutron scattering (SANS) has been employed to study a blend of polystyrene and polybutadiene modified by copolymer additives. SANS data from the one-phase region approaching the phase boundary has been acquired for blends modified by random and diblock copolymers that have equal amounts of styrene and butadiene monomers as well as a random copolymer with an unequal monomer composition. The binary blend is near the critical composition, and the copolymer concentrations are low at 2.5% (w/w). The data have been fitted with the random-phase approximation model (binary and multicomponent versions) to obtain Flory–Huggins interaction parameters (χ) for the various monomer interactions. These results are considered in the context of previous light scattering data for the same blend systems. The SANS cloud points are in good agreement with previous results from light scattering. The shifts in the phase boundary are due to the effects of the additives on the χ parameter at the spinodal. All the additives appear to lower the χ parameter between the homopolymers; this is in conflict with the predicted Flory–Huggins behavior. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3191–3203, 2004     

Copolymers of 1,2-disubstituted acetylenes containing trifluoropropyl groups synthesized in the presence of NbCl<Subscript>5</Subscript>-based catalyst systems: Structure and gas-transport behavior

Using a NbCl₅-based catalyst system, random copolymers of 1-(3,3,3-trifluoropropyldimethylsilyl)-1-propyne and 1-trimethylsilyl-1-propyne are synthesized in a wide range of comonomer contents. The dependences of gas-transport behavior on the composition and supramolecular organization of the copolymer are studied. Composition regions and conditions of preparing copolymers combining high permeability coefficients with resistance against nonpolar organic solvents are ascertained. The copolymers demonstrate a high selectivity in the separation of butane from a methane–butane mixture.     

Temperature and concentration effects on supramolecular aggregation and phase behavior for poly(propylene oxide)-b-poly(ethylene oxide)- b-poly(propylene oxide) copolymers of different composition in aqueous mixtures, 1

The phase behavior (temperature vs composition) and microstructure for the two binary systems Pluronic 25R4 [(PO)19(EO)33(PO)19]-water and Pluronic 25R2 [(PO)21(EO)14(PO)21]-water have been studied by a combined experimental approach in the whole concentration range and from 5 to 80 degrees C. The general phase behavior has been identified by inspection under polarized light. Precise phase boundaries have been determined by analyzing 2H NMR line shape. The identification and microstructural characterization of the liquid crystalline phases have been achieved using small-angle X-ray scattering (SAXS). The isotropic liquid solution phases have been investigated by self-diffusion measurements (PGSE-NMR method). 25R2 does not form liquid crystals and is miscible with water in the whole concentration range; with increasing temperature, the mixtures split into water-rich and a copolymer-rich solutions in equilibrium. 25R4 shows rich phase behavior, passing, with increasing copolymer concentration, from a water-rich solution to a lamellar and copolymer-rich solution. A small hexagonal phase, completely encircled in the stability region of the water-rich solution, is also present. In water-rich solutions, at low temperatures and low copolymer concentrations, the copolymers are dissolved as independent macromolecules. With increasing copolymer concentrations an interconnected network of micelles is formed in which micellar cores of hydrophobic poly(propylene oxide) are interconnected by poly(ethylene oxide) strands. In copolymer-rich solutions water is molecularly dissolved in the copolymer. The factors influencing the self-aggregation of Pluronic R copolymers (PPO-PEO-PPO sequence) are discussed, and their behavior in water is compared to that of Pluronic copolymers (PEO-PPO-PEO sequence).     

Copolymerization of methyl methacrylate with lauryl methacrylate using group transfer polymerization

The syntheses of random and block copolymers (using sequential monomer addition) of methyl methacrylate (MMA) and lauryl methacrylate (LMA) have been investigated by group transfer polymerization (GTP) over a wide composition range using tetrabutylammonium bibenzoate (TBABB) as catalyst and 1-methoxy-1-(trimethylsiloxy)-2-methyl-1-propene (MTS) as initiator in tetrahydrofuran (THF) at room temperature. The absolute molecular weight of the copolymers were determined by SEC-MALLS. The observed molecular weights were generally higher than the calculated molecular weights. However, the molecular weight distributions were very narrow (1.02–1.1). Use of trimethylsilyl benzoate as a “livingness enhancer” improved the livingness of the first block (PLMA) and block copolymers with no detectable contamination of homopolymer. Statistical copolymers of MMA and LMA were prepared, and the reactivity ratios of the two monomers under the defined conditions were determined. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1999–2007, 1997     

Characterization of poly(styrene‐co‐methacrylonitrile)s obtained by low‐temperature radiation polymerization and thermal degradation behavior measured by Py‐GC and CRTG

Poly(styrene‐co‐methacrylonitrile)s were polymerized in solutions with different polarities (n‐hexane and THF) by low‐temperature γ‐ray irradiation polymerization in a temperature range of −83.6–30 °C. It was found by IR measurement that the composition of the copolymers changed remarkably due to the effects of the polarity of solvents and the polymerization temperature. The thermal degradation behavior in the flash pyrolysis and in the continuous heating pyrolysis of these copolymers was measured by Py‐GC and controlled rate thermogravimetry (CRTG). The effects of the copolymer composition and sequence distribution on the thermal degradation behavior were investigated. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3569–3577, 2000     

Correlation of Composition and DP of Some ThreeComponent Phenolic Block Copolymers with Their Titration Curves in Nonaqueous Media

Some three-component phenolic block copolymers have been prepared from the following three monomeric units: p-amino-phenol, p-chlorophenol, and p-creso1. Homopolymerization of these monomers has been done with formaldehyde in the presence of acid catalyst. The homopolymer samples were then condensed together with stoichiometric quantities of formaldehyde and acid catalyst. Several samples of the copolymers were also prepared by changing the composition of the feed during homopolymerization. Composition, DP, and the average number of a particular monomeric uhit in a block of a copolymer chain has been deduced from electrometric titration curves of the copolymers in nonaqueous media.

Simultaneous copolymerization of three different monomer species may give rise to a copolymer whose composition will depend on the relative reactivity of the monomers. In normal copolymerization the different monomers alternate in the chain either in a more or less regular or in a completely random manner. Some preliminary investigations on a few three-component random phenolic copolymers revealed that composition, DP, and dissociation behavior of such systems could be evaluated by electrometric titration techniques in nonaqueous media [1]. Since three-component copolymers as such are quite complex, it was therefore considered of interest to see whether such simple techniques could be used for getting information about these copolymers prepared under various conditions. Keeping this fact in view, block copolymers involving the following three monomeric units have been prepared: p-aminophenol (PAP), p-chlorophenol (PClP), and p-cresol (PC). Block copolymers have been prepared by combining the homopolymer chains of the three monomers with the aid of functional groups and formaldehyde. The feed composition of the homopolymers has also been varied to change the size of the blocks. The characteristic feature of these three-component copolymers is the presence of a phenolic OH group in each of its repeating units and the presence of -NH₂ and Cl groups as structural substi-tuents in some of the repeating units. One can thus deduce the composition of the copolymers from the quantitative estimation of C1 and -NHz groups. An attempt has been made in this paper to correlate composition, DP, size of some of the blocks in the copolymer chains, intramolecular hydrogen bonding, etc. with the features of electro-metric titration curves of the copolymers in nonaqueous media.     

Influence of molecular architecture of S–S/B–S triblock copolymers on rheological properties

The influence of middle and outer block composition of symmetric triblock copolymers consisting of a polystyrene–polybutadiene (S/B) random middle block and two polystyrene (PS) outer blocks on morphology and rheological behavior has been investigated. Master curves are obtained by shifting the experimental data measured at different temperatures using time‐temperature superposition principle, the validity of which was confirmed in the linear viscoelastic regime. The rheological properties are observed to be strongly influenced by the relative composition of the S‐SB‐S triblock copolymers. Increasing the S/B ratio from 1:1 to 1:2 in the middle block has lead to a change in morphology from wormlike to lamellar, which is also accompanied with broad and sharp tan δ peaks in the dynamic mechanical measurements, respectively. The storage and loss modulus have been observed to increase with the increase in PS contents in the outer blocks and PB content in the middle block. The triblock copolymer with wormlike structure showed terminal linear viscoelastic behavior, whereas the ones with lamellar morphology showed nonterminal flow behavior in the similar low‐frequency regime. The relaxation modulus (G_t) has been observed to increase four times when the S/B ratio is increased from 1:1 to 1:2, whereas it increases threefold when the PS‐content in the outer block was increased by just 8 wt %. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2776–2788, 2006