首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Acyl- and Alkylidenearsines VII Synthesis and Structure of Tetrakis(2,2-dimethylpropionyl)diarsine Lithium dihydrogenarsenide and 2,2-dimethylpropionyl chloride in a molar ratio of 3:2 react at ?40 to ?50°C in tetrahydrofuran or 1,2-dimethoxyethane to give the corresponding etherate of lithium bis(2,2-dimethylpropionyl)arsenide ( 2a ). Treatment of these solutions with stoichiometric amounts of 85% tetrafluoroboric acid · diethylether adduct yields yelloworange tetrakis(2,2-dimethylpropionyl)diarsine ( 5 ) in 64 or 62% yield resp., but not the expected bis (2,2-dimethylpropionyl)arsine ( 4a ). The very air-sensitive compound crystallizes in the monoclinic space group P21/n {?100 ± 3° C; a = 1224.6(3); b = 1419.7(3); c = 1333.1(3) pm; β = 96.22(2)°; Z = 4}. According to the X-ray structure analysis (Rw = 0.036) the molecule shows synclinal conformation; the two diacylarsyl-subunits are twisted against one another by an angle of 86°. As in another acylarsine [1] the As? C distances (203 to 205 pm) were found to be significantly longer then the standard value of 196 pm. Further characteristic bond lengths and angles are: As– 242; C? O 120 to 121 pm; As? As? C 88 to 107°; As? C? O 118 to 122°  相似文献   

2.
Metal Derivatives of Molecular Compounds. III. Molecular and Crystal Structure of Lithium bis(trimethylsilyl)phosphide · DME and of Lithium dihydrogenphosphide · DME Lithium bis(trimethylsilyl)phosphide · DME 1 prepared from tris(trimethylsilyl)-phosphine and lithium methanide [2, 4] in 1,2-dimethoxyethane
  • 1 1,2-Dimethoxyethan (DME); Tetrahydrofuran (THF); Bis[2-(dimethylamino)ethyl]methyl-amin (PMDETA).
  • , crystallizes in the orthorhombic space group Pnnn {a = 881.1(9); b = 1308.5(9); c = 1563.4(9) pm at ?120 ± 3°C; Z = 4 formula units}, lithium dihydrogenphosphide · DME 2 [10] prepared from phosphine and lithium- n -butanide in the same solvent, in P2 1 2 1 2 1 {a = 671.8(1); b = 878.6(1); c = 1332.2(2) pm at ?120 ± 3°C; Z = 4 formula units}. X-ray structure determinations (R w = 0.036/0.045) show the bis(trimethylsilyl) derivative 1 to be dimeric with a planar P? Li? P? Li ring (P? Li 256 pm; Li? P? Li 76°; P? Li? P 104°), and the dihydrogenphosphide 2 to be polymeric with a linear Li? P? Li fragment (P? Li 254 to 260 pm; Li? P? Li 177°; P? Li? P 118°). The shortened P? Si distance (221 pm) of compound 1 and the structure of the PH 2 group in 2 are discussed in detail. Lithium obtains its preferred coordination number 4 by a chelation with one molecule of 1,2-dimethoxyethane (Li? O 202 to 204 pm).  相似文献   

    3.
    Acyl- and Alkylidenephosphines. XXIII. Synthesis and Structure of [Bis(trimethylsilylsulfano)methylidene]phosphines Analogous to the phenyl derivative 1a [2] tert-butyl- 1b , mesityl- 1c and methylbis-(trimethylsilyl)phosphine 1 d react with carbon disulfide to give the corresponding [bis(trimethylsilylsulfano)methylidene]phosphines 4 . Only in case of the mesitylphosphine 1 c the intermediate compounds 2 and 3 could be detected by n.m.r. spectroscopic methods; thermally unstable [bis(trimethylsilylsulfano)methylidene]methylphosphine 4 d dimerizes rapidly [1]. [Bis(trimethylsilylsulfano)methylidene]phenylphosphine 4 a crystallizes in the monoclinic centrosymmetric space group P21/c with following dimensions of the unit cell determined at ?95 ± 3°C: a = 1386.4(8); b = 1036.0(7); c = 1281.7(8) pm; ß = 101.23(4)°; Z = 4. An X-ray structure determination (R = 0.032) proves the constitution of this compound as already derived from its nmr spectra. Characteristic bond lengths and angles are: P?C 170; P? C(phenyl) 183; C? S 176; S? Si 219 pm; C? P?C 107; P?C? S 124 and 120; S? C? S 116 and C? S? Si 111°.  相似文献   

    4.
    Acyl and alkylidene phosphines. XII. Syntheses and properties of 2,2-dimethylpropionylphosphine and of some derivatives At ?25°C bis(trimethylsilyl)phosphine 1b and 2,2-dimethylpropionyl chloride form (2,2-dimethylpropionyl)trimethylsilylphosphine 2b . As this compound is thermally more stable than similar acyltrimethylsilylphosphines, it might be treated at ?55°C with methyllithium to form the correspondig lithium phosphide 2d ; after the addition of chlorotrimethylsilane [2,2-dimethyl-1-(trimethylsiloxy)propylidene]-trimethylsilylphosphine 3c is obtained. At +20°C 2b rearranges to the E and Z isomer of [2,2-dimethyl-1-(trimethylsiloxy)propylidene]phosphine 3b . The NMR data of E- 3b and Z- 3b differ mostly in the coupling constants. Kept in the diffuse daylight for several days 3b dimerizes to form 2,4-di(tert.butyl)-2,4-bis(trimethylsiloxy)-1,3-diphosphetane 10 . In solution 10 is unstable and decomposes again to a mixture of the E und Z isomer of 3b . Reacting 3b or 3c with alcoholes all trimethylsilyl groups are replaced by hydrogen atoms and unstable 2,2-dimethylpropionylphosphane 4b is formed. Lithium(2,2-dimethylpropionyl)phosphide 4d , synthesized at ?60°C from 4b and methyllithium, crystallizes with one molecule 1,2-dimethoxyethane per formula unit and is dimeric in benzene. As shown by the NMR data 4d has the structure of an alkylidene-phosphine with the lithium atom bound to oxygen. At ?50°C 4d and chlorotrimethylsilane react to form 3b .  相似文献   

    5.
    Acyl and Alkylidenephosphines. XlX. Molecular and Crystal Structure of 2,4-Bis (dimethyl-amino) ?1,3-diphenyl-l, 3-diphosphetane 2,4-Bis(dimethylamino)-1,3-diphenyl-1,3-diphosphetane 2a which is isolated as a byproduct in the synthesis of (E)-(dimethylamino)methylidene-phenylphosphine 1a crystallizes in the monoclinic space group P21/c. The dimensions of the unit cell determined at ?65 ± 5°C are: a = 1 004(1); b = 1 018(3); c = 1 873(2) pm; β = 105.15(8)°; Z = 4. As it is shown by a low temperature X-ray structure determination (Rg = 3.5%) the phenyl groups are placed above and the dimethylamino groups below the folded 1,3-diphosphetane ring; the molecule with its differently twisted substituents, however, deviates considerably from point symmetry mm2. The dihedral angle between the P1? C1n? P2 planes (n = 1 or 2) is found to be 153°. The relatively long Pn? C1n bond distances (187 to 191 pm) indicate a strained ring system; in solution 2a decomposes to some extent and forms monomeric 1a again. Further characteristic average bond distances and angles are: Pn? C4n (phenyl) 184; C? N 146 pm; P1? C1n? P2 93°; C11? Pn? C12 84° and Pn? C1n? Nn 116°.  相似文献   

    6.
    Das Gemisch aus dem E- und Z-Isomeren des [2,2-Dimethyl-1-(trimethylsiloxy)propyliden]phosphans ist bei 20°C im diffusen Tageslicht nicht beständig; im Laufe einiger Wochen scheidet sich das Dimere 2,4-Di(tert.butyl)-2,4-bis(trimethylsiloxy)-1,3-diphosphetan 1 ab. Die Verbindung kristallisiert triklin in der Raumgruppe P1 mit a = 1044,5(3); b = 647,8(2); c = 883,8(2) pm; α = 100,39(2); β = 102,84(2); γ = 93,70(2)°; Z = 1. Wie die Röntgenstrukturanalyse (R = 3,7%) zeigt, besitzt das Molekül als kristallographisches Symmetrieelement ein Inversionszentrum. Die mit 190,3 und 189,5 pm langen P? C? Abstände weisen auf eine beträchtliche Ringspannung hin; in Lösung zerfällt das Diphosphetan wieder leicht in das E- und Z-isomere Monomere. Weitere charakteristische Bindungsabstände und -winkel sind: C1? O 140,8; Si? O 163,5 pm sowie P? C1? P' 92,7; C1? P? C1′ 87,3; C1? O? Si 146,2° Acyl and Alkylidene Phosphines. XIII. Molecular and Crystal Structure of 2,4-Di(tert.-butyl)-2,4-bis(trimethylsiloxy)-1,3-diphosphetane Kept at 20°C in diffuse daylight the mixture of the E and Z isomer of [2,2-dimethyl-1-(trimethylsiloxy)propylidene]phosphine is not stable; within several weeks the dimer 2,4-di(tert.-butyl)-2,4-bis(trimethylsiloxy)-1,3-diphosphetane 1 precipitates. The compound crystallizes triclinic in the space group P1 with a = 1044.5(3); b = 647.8(2); c = 883.8(2) pm; α = 100.39(2); β = 102.84(2); γ = 93.70(2)°; Z = 1. As shown by an x-ray structure determination (R = 3.7%) the molecule has a centre of symmetry. The long P? C distances (189.5 and 190.3 pm) indicate a strained ring-system; in solution the diphosphetane decomposes again to form the E and Z isomeric monomer. Further characteristic bond distances and angles are: C1? O 140.8; Si? O 163.5 pm as well as P? C1? P' 92.7; C1? P? C1′ 87.3; C1? O? Si 146.2°.  相似文献   

    7.
    Element-Element Bonds. I. Syntheses and Structure of Tetra(tert-butyl)tetrarsetane and of Tetra(tert-butyl)tetrastibetane Dilithium (tert-butyl)arsenide reacts with (tert-butyl)dichloroarsine to give tetra-(tert-butyl)tetrarsetane 1 ; homologous tetra(tert-butyl)tetrastibetane 2 is formed by reduction of (tert-butyl)dichlorostibane with magnesium. The isotypic compounds 1/2 crystallize in the monoclinic space group P21/c with Z = 4. The dimensions of the unit cells determined at ?45 ± 5°C are: a = 957.4(8)/1 000.2(3); b = 1 399.1(14)/1 423.9(4); c = 1 697.4(9)/1 749.8(7) pm; β = 96.02(6)/96.77(3)°. As shown by low temperature X-ray structure determinations (3 531/3 232 symmetry independent reflections; Rg = 4.0/4.6%) the four membered rings E4 (E = As or Sb) are folded; in all-trans configuration the bulky organic substituents occupy pseudo-equatorial positions. Characteristic averaged bond distances and angles are: E? E 244/282; E? C 202/221 pm; ? E? E? E 86/85° ? E? E? C 101/99°. The dihedral angels of the bisphenoides built up by the atoms of the rings are found to be 139/133°.  相似文献   

    8.
    Metal Derivatives of Molecular Compounds. IX. Bis(1,2-dimethoxyethane- O,O′ )lithium Phosphanide, Arsanide, and Chloride – Three New Representatives of the Bis(1,2-dimethoxyethane- O,O′ )lithium Bromide Type Experiments to obtain thermally unstable lithium silylphosphanide at –60 °C from a 1,2-dimethoxyethane solution resulted in the isolation of its dismutation product bis(1,2-dimethoxyethane-O,O′)lithium phosphanide ( 1 ). The homologous arsanide 2 precipitated after a frozen solution of arsane in the same solvent had been treated with lithium n-butanide at –78 °C. Unexpectedly, too, the analogous chloride 3 and bromide 4 were formed in reactions of 1-chloro-2,2-bis(trimethylsilyl)-1λ3-phosphaethene with (1,2-dimethoxyethane-O,O′)lithium bis(trimethylsilyl)stibanide and of lithium 1,2,3,4,5-pentaphenyl-2,3-dihydro-1λ3-phosphol-3-ide with ω-bromostyrene, respectively. The monomeric complexes 1 {–100 ± 3 °C; a = 1391.1(4); b = 809.8(2); c = 1249.1(3) pm; β = 102.84(2)°}, 2 {–100 ± 3 °C; a = 1398.3(4); b = 819.8(3); c = 1258.5(4) pm; β = 103.35(2)°} and 3 {–100 ± 3 °C; a = 1308.4(2); b = 788.2(1); c = 1195.6(1) pm; β = 95.35(1)°} crystallize in the monoclinic space group C2/c with four solvated ion pairs in the unit cell; they are isotypic with bis(1,2-dimethoxyethane-O,O′)lithium bromide ( 4 ) {–73 ± 2 °C; a = 1319.0(2); b = 794.1(1); c = 1214.3(2) pm; β = 96.22(1)°}, already studied by Rogers et al. [13] at room temperature. The neutral complexes show a trigonal bipyramidal configuration of symmetry C2, pnicogenanide or halide anions occupying equatorial sites {Li–P 260.4(4); Li–As 269.8(6); Li–Cl 238.6(7); Li–Br 256.3(10) pm} and the chelate ligands spanning equatorial and axial positions {Li–Oeq 205.4(4) to 207.4(4); Li–Oax 208.9(3) to 215.5(2) pm}. The coordination within the (dme)2Li fragment, the Li–X distances (X = P, As, Cl, Br), the structure of the chelate rings, and the packing of the neutral complexes are discussed in detail.  相似文献   

    9.
    Acyl- and Alkylidenephosphines. XXII. Synthesis and Structure of 1, 3-Dimethyl-2,2,4,4-tetrakis(trimethylsilylsulfano)-1,3-diphosphetane At ?30°C methylbis(trimethylsilyl)phosphine reacts with carbon disulfide to give a red adduct first which rearranges to [bis(trimethylsilylsulfano)methylidene]methylphosphine 1a . In contrast to the thermally stable phenyl derivative 1b [2], this compound with its insufficiently shielded P?C group dimerizes fast with increasing temperature. 1,3-Dimethyl-2,2,4,4-tetrakis(trimethylsilylsulfano)-1,3-diphosphetane 2a formed by this reaction, crystallizes in the triclinic space group P1 with following dimensions of the unit cell, determined at a temperature of measurement of ?80 ± 3°C: a = 1024.7(3); b = 1360.2(5); c = 1326.3(6)pm; α = 117.85(4); ß = 111.05(3); γ = 72.09(3)°; Z = 2. Due to ring folding at the P1? P2 axis of 149.1°, the molecule shows pseudosymmetry Cs. Characteristic averaged bond lengths and angles obtained at an Rw-value of 0.030, are: P? C(endocyclic) 188 and 191; P? CH3 184; C? S 183; S? Si 216 pm; C? P? CH3 105; P? C? S 113; S? C? S 114; C? S? Si 108; P? C? P 90 and C? P? C 86°.  相似文献   

    10.
    Acyl- and Alkylidenephosphines. XXXII. Di-cyclohexoyl- and Diadamant-1-oylphosphine – Keto-Enol Tautomerism and Structure Lithium dihydrogenphosphide · DME (1) [12] and cyclo-hexoyl or adamant-1-oyl chloride react in a molar ratio of 3:2 to give lithium di-cyclo-hexoylphosphide · DME and the corresponding diadamant-1-oylphosphide.2THF (1) resp. Treatment of these two compounds with 85% tetrafluoroboric acid. diethylether adduct yields di-cyclo-hexoyl- ( 1b ) and diadamant-1-oylphosphine ( 1c ). In nmr spectroscopic studies 1b over a range of 203 to 343 K, a strong temperature dependence of the keto-enol equilibrium is found; thermodynamic data characteristic for the formation of the enol tautomer (ΔH0 = ?4.3 kJ. mol?1; ΔS0 = ?9.2 J. mol?1. K (?1) are compared of 1,3-diketones. The enol tautomer of diadamant-1-oylphosphine ( E-1c ) as obtained from a benzene solution in thin colourless plates, crystallizes in the monoclinic space group P21/c {a = 722.2(2); b = 1085.5(4); c = 2434.8(5) pm; ß = 96.43(2)° at –100 ± 3°C; Z = 4}. An X- ray structure analysis (Rw = 0.033) shows bond lengths and angles to be almost identical within the enolic system (P? C 179/180; C? O 130/129; C? C(adamant-1-yl) 152/153 pm; C? P? C 99°; P? C? O 124°/124°; P? C? C 120°/120°; C? C? O 116°/116°. The geometry of the very strong, but probably asymmetric O‥H‥O bridge is discussed (O? H 120/130, O‥O 245 pm).  相似文献   

    11.
    Metal Derivatives of Molecular Compounds. VII. Bis[1,2-bis(dimethylamino)ethane-N,N′]lithium Disilylphosphanide — Synthesis and Structure Crystalline lithium phosphanides studied so far show a remarkably high diversity of structure types dependent on the ligands at lithium and the substituents at phosphorus. Bis[1,2-bis(dimethylamino)ethane-N,N′]lithium disilylphosphanide ( 1 ) discussed here, belongs to the up to now small group of compounds which are ionic in the solid state. It is best prepared from silylphosphane by twofold lithiation with lithium dimethylphosphanide first and subsequent monosilylation with silyl trifluoromethanesulfonate, followed by complexation. As found by X-ray structure determination (wR = 0.038) on crystals obtained from diethyl ether {monoclinic; space group P21/c; a = 897.8(1); b = 1 673.6(2); c = 1 466.8(1) pm; β = 90.73(1)° at ?100 ± 3°C; Z = 4 formula units}, the lithium cation is tetrahedrally coordinated by four nitrogen atoms of two 1,2-bis(dimethylamino)ethane molecules. Characteristic parameters of the disilylphosphanide anion are a shortened average P? Si bond length of 217 pm (standard value 225 pm) and a Si? P? Si angle of 92.3°.  相似文献   

    12.
    Acyl- and Alkylidenephosphines. XXVII. Molecular and Crystal Structure of Methyl-[(N-phenyl, N-trimethylsilyl)thiocarbamoyl]trimethylsilylphosphine . Methyl[(N-phenyl, N-trimethylsilyl)thiocarbamoyl]trimethylsilylphosphine 1a formed via an addition of methylbis(trimethylsilyl)phosphine to phenyl isothiocyanate [1], crystallizes in the monoclinic centrosymmetric space group P21/n with following dimensions of the unit cell determined at a temperature of measurement of ?80±3°C: a=1041.2(4);b=1706.9(12);c=1001.1(6)pm; β=106.41(4)°; Z = 4. An X-ray structure determination (Rw = 0.039) confirms the constitution of the compound as already derived from its nmr spectra. One trimethylsilyl group is bound to the phosphorus atom, whereas the other is connected with the sp2-hybridized nitrogen atom. Characteristic rounded bond lenghts and angles are: P? Si 231, P? CH3 184, P? C(S) 187, C?S 167, N? C(S) 137, and N? Si 181 pm as well as P? C? S 122°, P? C? N 117°, and S? C? N 121°.  相似文献   

    13.
    Acyl- and Alkylidenephosphines. XXVIII. Synthesis and Structure of 1,3-Dibenzyl- and 1,3-Diethyl-2,4-bis(phenylimino)-1,3-diphosphetane Catalyzed by small amounts of solid sodium hydroxide, the adducts 1a and 1b formed from benzyl- or ethylbis(trimethylsilyl)phosphine and phenylisocyanate, react at +20°C slowly to give hexamethldisiloxane and oligomeric [(phenylimino)methylidene]phosphines. In different solvents the benzyl compound was found to exist only as a mixture of [N,N′-(E)/(Z)]-isomeric 2,4-bis-(phenylimino)-1,3-diphosphetanes 2a with their alkyl groups at the phosphorus atoms in trans position, whereas in case of the ethyl derivative 2b a second pair of [N,N′-(E)/(Z)]-isomeric dimers with their substituents in cis position and two trimeric forms ( 3b and 4b ) could be detected in cyclopentane. [N,N′-(E)]-1r,3t-dibenzyl- ( 2a ) and [N,N′-(E)]-1r,3t-diethyl-2,4-bis(phenylimino)-1,3-diphosphetane 2b isolated from 1,2-dimethoxyethane or cyclopentane, crystallize in the monoclinic space group P21/c or P21/n, resp., with following dimensions of the unit cell determined at temperatures of measurement of +20 ± 3°C/?130 ± 3°C: a = 2145.4(1)/569.3(1); b = 568.1(2)/719.1(2); c = 1960.2(2)/2042.6(4) pm; β 99.43(1)°/95.03(2)°; Z = (2+2) and 2, resp. X-ray structure determinations (Rw = 0.034/0.041) show both molecules to be centrosymmetric. Characteristic rounded bond lengths (pm) and angles (°) are: endocyclic P? C 185/184; C? P? C 82/81; P? C? P 98/99; exocyclic P? C 186/184; C?N l27/127; C?N? C 121/11.  相似文献   

    14.
    Structural Chemistry of Phosphorus-containing Chains and Rings. 1. Crystal Structure of the Diphosphasilirane (t-BuP)2SiPh2 The three-membered P2Si-heterocycle 1, 2-di-tert-butyl-3, 3-diphenyl-1, 2, 3-diphosphasilirane (t-BuP)2SiPh2 crystallizes monoclinic in the space group P21 with a = 1041.2 pm, b = 882.3 pm, c = 1158.1 pm, β = 91.33° and Z = 2 formula units. A special structural feature is the regular triangle built up by two P and one Si. Therefore the endocyclic bond angle at Si is as low as 60°. The average bond lengths are P? P = 222.6 pm, P? Si = 222.5 pm, P? C = 190.8 pm, Si? C = 186.6 pm, (C? C )ph = 139.0 pm, ( C? C )t-Bu = 151.7 pm. The geometry of the substituents phenyl and tert-butyl is quite normal, the last ones are slightly disordered.  相似文献   

    15.
    Methylation and Oxidation of 1,1-Dicyanoethylene-2,2-oxo-thiolate Dianion: Preparative and Structural Investigations The reaction of K2[S(O)C?C(CN)2] with CH3I yields the mono-S-methylproduct. The potassium salt crystallizes in the space group P21/c with a = 3.951(1), b = 15.623(3), c = 11.916(2) Å, β = 93.46(3)° and Z = 4. The methyl group is directed towards the oxygen atom. Potassium has a monocapped trigonal prismatic coordination: 5 N and 2 O atoms. The oxidation of 1,1-Dicyanoethylene-2,2-oxo-thiolate yields the dimere [(NC)2C?C(O)? S? S? (O)C?C(CN)2]2? in the first oxidation step. An X-ray crystal structure determination shows that the anion consists of two planar [S(O)C?C(CN)2] units which are oriented perpendicular within the anion.  相似文献   

    16.
    Structural Chemistry of Phosphorus-containing Chains and Rings. 2. Crystal and Molecular Structure of the Diphosphaborirane (t-BuP)2BNEt2 The three-membered P2B-heterocycles 1,2-di-tert-butyl-3-diethylamino-1,2,3-diphosphaborirane, (t-BuP)2BNEt2, crystallizes triclinic in the space group P1 with a = 935.5 pm, b = 985.4 pm, c = 987.4 pm,α = 81.55°, β = 89.40°, γ =69.07°, and Z = 2 formula units. The main structural feature is a short B? N-bond length (138.2 pm) inside a plane P2BN-group. The endocyclic bond angles are 54.0° on phosphorus and 72.0° on boron. The (average) bond lengths are P? P = 222.5 pm, P? C = 189.5 pm, P? B = 189.3 pm, B? N = 138.2 pm, N? C = 147.2 pm, C? C = 152.6 pm, and C? H = 98 pm. The geometry of the substituents ethyl and tert-butyl is quite normal.  相似文献   

    17.
    Trimethylsilyl Derivatives of Vb-Elements. V. Molecular and Crystal Structure of Lithium Bis(trimethylsilyl)arsenide · DME Lithium bis(trimethylsilyl)arsenide · DME 1 obtained from tris(trimethylsilyl)-arsine and n-butyl or methyl lithium in 1,2-dimethoxyethane crystallizes monoclinic with {a = 1813(3); b = 1327(3); c = 968(1) pm; β = 119.3(1)°; Z = 4} at +20°C. Experimental conditions unfavourable for an X-ray structure determination caused high standard deviations of all structural parameters. The refinements of these values calculated with respect to the centrosymmetric space group C2/m converged at a relatively high R-value of 0.090. In contrast to the homologous antimonide lithium bis(trimethylsilyl)arsenide · DME 1 is found to be dimeric in solution as well as in the solid state. The four-membered ring built up by bis(trimethylsilyl)arsino groups and DME-coordinated lithium atoms in alternating sequence is planar; the carbon atoms statistically occupy positions on both sides of a mirror plane. Characteristic bond lengths and angles are: As? Si 230.7(7); As? Li 259(2); Li? O 205(4) and 215(4) pm; Si? As? Si 103.2(4)°; Li? As? Li 81(1)°; As? Li? As 99(1)° and Li? As? Si 115(1)°.  相似文献   

    18.
    Hydrogen Bridges. I. Molecular and Crystal Structure of Phosphonic Acid H3PO3 – X-ray and Neutron Diffraction Studies of the Hydrogen and Deuterium Compounds The structure of phosphonic acid H3PO3 has been redetermined by single crystal neutron diffraction (λ = 104.22 pm) at 15.0 ± 0.1 K yielding lattice parameters {Pna21; Z = 8; a = 716.6(3); b = 1201.3(5); c = 674.3(3) pm} and bond lengths {mean values from two crystallographically independent molecules: P? O 155; P?O 150; P? H 139; O? H 101 pm} of high reliability (R = 0.053). Each molecule is involved in four asymmetric hydrogen bonds (O…H 155 to 160pm; O? H…O 168 to 177°) with either hydroxyl group donating and the phosphoryl fragment acting as a twofold acceptor. Thus a complex, three-dimensional net, consisting of four- and eight-point circuits in a 1:2 ratio, is put up although the molecules are packed in a comparatively simple way to form an almost cubic closest arrangement. An X-ray crystal structure determination (R = 0.032) carried out at 173 ± 3 K for comparison revealed no significant differences and angles between phosphorus and oxygen atoms; an additional comparing neutron diffraction study at 15.0 ± 0.1 K (λ = 131.68 pm; isotropic atomic displacement parameters) of the hydrogen (r = 0.044) and deuterium compounds (R = 0.041) resulted in nearly identical structural models for the two isotopomers.  相似文献   

    19.
    Synthesis of Phenylnitrene Complexes with N-Trimethylsilylaniline. II. Characterization and Crystal Structure of the Rhenium(V) Complexes mer-[Re(NPh)Cl3(NH2Ph)(Ph3P)] and trans-[Re(NPh)(OMe)Cl2(Ph3P)2] Reaction of [ReOCl3(Ph3P)2] with N-trimethylsilylaniline yields mer-[Re(NPh)Cl3(Ph3P)2], which reacts under air with excess of N-trimethylsilylaniline to form [Re(NPh)Cl3 · (NH2Ph)(Ph3P)]. Crystallization from CH2Cl2/MeOH affords [Re(NPh)(OMe)Cl2(Ph3P)2] as an additional product. [Re(NPh)Cl3(NH2Ph)(Ph3P)] crystallizes in the monoclinic space group P21/n with a = 1 192.3(3); b = 1 918.9(3); c = 1 266.3(3) pm; β = 101.71(1)°; Z = 4. The rhenium atom has a distorted octahedral environment with the Cl atoms in meridional positions. The phenyl nitrene ligand is coordinated with an almost linear arrangement Re? N1? C40 = 166.8(6)° and with a bond distance Re?N = 170.5(6) pm. [Re(NPh)(OMe)Cl2(Ph3P)2] · 1/2CH2Cl2 crystallizes in the triclinic space group P1 : a = 1 103.1(4); b = 1 227.9(4); c = 1 711.3(5) pm; α = 70.48(3)°; β = 72.71(3)°; γ = 80.03(3)°; Z = 2. The rhenium atom exhibits a distorted octahedral coordination with the Cl atoms and the phosphine ligands in trans positions. As a consequence of the competition of the nitrene ligand and the trans-coordinated methoxy group the Re?;N bond length is slightly lengthened to 173.2(7) pm, while the Re? O bond length of 193.4(6) pm is short. The bond angles Re? N? C70 and Re? O? C80 are 173.3(7)° and 139.1(7)°, respectively.  相似文献   

    20.
    Structural Chemistry of Phosphorus Containing Chains and Rings. 16. Molecular and Crystal Structure of the Triisopropylundecaphosphane P11(i-Pr)3 The compound 4,7,11-triisopropyl-pentacyclo[6.3.0.02.6.03.10.05.9]undecaphosphane, C9H21P11, crystallizes triclinically in the space group P1 with a = 1 045.3 pm, b = 1 057.2 pm, c = 1 075,0 pm, α = 101.00°, β = 98.89°, γ = 112.27° and Z = 2. The main structural feature is a phosphorus skeleton with approximate symmetry D3 composed of six five-membered rings which are asymmetrically substituted by the isopropyl groups. The (average) bond lengths are d(P? P) = 221.6 pm, d(P? C) = 187.5 pm, d(C? C) = 151.4 pm, d(C? H) = 108 pm with 217.6 ≤ d(P? P) ≤ 226.4 pm. The geometry of the substituents is quite normal.  相似文献   

    设为首页 | 免责声明 | 关于勤云 | 加入收藏

    Copyright©北京勤云科技发展有限公司  京ICP备09084417号