Synthesis and phase behavior of aqueous poly(N-isopropylacrylamide-co-acrylamide), poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) and poly(N-isopropylacrylamide-co-2-hydroxyethyl methacrylate)

Poly(N-isopropylacrylamide) (PNIPAM) and random copolymers of Poly(N-isopropylacrylamide-co-2-hydroxyethyl methacrylate) (PNIPAM-HEMA), poly(N-isopropylacrylamide-co-acrylamide) (PNIPAM-AAm), and poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) (PNIPAM-DMAA) with various volume fractions γ of NIPAM were synthesized by radical polymerization. The phase behavior of the polymers in water was investigated by means of optical transmittance and dynamic light scattering. With decreasing γ, the cloud point temperature T _cp for PNIPAM-HEMA decreased whereas the T _cp for both PNIPAM-AAm and PNIPAM-DMAA increased. Increase of hydrodynamic radius around T _cp, which resulted from the aggregation of the globules of each polymer, was observed from dynamic light scattering. The relationships between the reciprocal of T _cp of the polymer solutions and 1-γ were linear for the three copolymers in the experimental range of 0.65<γ<1. The results are discussed from the aspect of the interaction parameters of copolymer solutions.     

Radical polymerization of methyl methacrylate in the presence of stereoregular poly(methyl methacrylate). V. Kinetics of initial template polymerization

The influence of stereoregular poly(methyl methacrylate) (PMMA) as a polymer matrix on the initial rate of radical polymerization of methyl methacrylate (MMA) has been measured between ?11 and +60°C using a dilatometric technique. Under proper conditions an increase in the relative initial rate of template polymerization with respect to a blank polymerization was observed. Viscometric studies showed that the observed effect could be related to the extent of complex formation between the polymer matrix and the growing chain radical. The initial rate was dependent on tacticity and molecular weight of the matrix polymer, solvent type and polymerization temperature. The accelerating effect was most pronounced (a fivefold increase in rate) at the lowest polymerization temperature with the highest molecular weight isotactic PMMA as a matrix in a solvent like dimethylformamide (DMF), which is known to be a good medium for complex formation between isotactic and syndiotactic PMMA. The acceleration of the polymerization below 25°C appeared to be accompanied by a large decrease in the overall energy and entropy of activation. It is suggested that the observed template effects are mainly due to the stereoselection in the propagation step (lower activation entropy Δ S_p^?) and the hindrance of segmental diffusion in the termination step (higher activation energy Δ E_t^?) of complexed growing chain radicals.     

Characterization and degradation of poly(methylphenylsiloxane)–poly(methyl methacrylate) interpenetrating polymer networks

Poly(methylphenylsiloxane)–poly(methyl methacrylate) interpenetrating polymer networks (PMPS–PMMA IPNs) were prepared by in situ sequential condensation of poly(methylphenylsiloxane) with tetramethyl orthosilicate and polymerization of methyl methacrylate. PMPS–PMMA IPNs were characterized by infrared (IR), differential scanning calorimetry (DSC), and ²⁹Si and ¹³C nuclear magnetic resonance (NMR). The mobility of PMPS segments in IPNs, investigated by proton spin–spin relaxation T₂ measurements, is seriously restricted. The PMPS networks have influence on the average activation energy E_a,av of MMA segments in thermal degradation at initial conversion. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1717–1724, 1999     

Study on the Kinetics of Polymerization of Tributyltin Methacrylate

The kinetics of polymerization of tributyltin methacrylate (TBTM) has been studied in benzene solution in the temperature range 60–75°C in the presence of azobisisobutyronitrile (AIBN). We have obtained the following polymerization rate equation: R _p = K _p [TBTM]^1.5 [AIBN]^0.5. It shows that the dependence of the polymerization rate on the concentrations of the monomer TBTM and the initiator AIBN are 1.5 and 0.5 order, respectively. The activation energy of polymerization was found to be 18.1 kcal/mol. The activation energy for the degree of polymerization is approximately -12.3 kcal/mol.     

Cope elimination and complexation of poly(dimethylaminoethyl methacrylate N-oxide)

Poly(dimethylaminoethyl methacrylate N-oxide) (poly(DMAEMNO)) was prepared by oxidation of poly(dimethylaminoethyl methacrylate) with hydrogen peroxide in methanol. From thermogravimetric and IR spectroscopic investigations Cope elimination of amine oxide group in poly(DMAENO) was found to occur at 120–150°C. The postpolymerization of partially pyrolyzed polymer carrying vinyl ester group as pendant was performed with azobisisobutyronitrile at 60°C in methanol to give cross-linked polymer that was found to form hydrogel. Poly(DMAEMNO) gave metal–polymer complexes with CuCl₂, ZnCl₂, and CoCl₂. Cobalt–polymer complex had a constitution of 1:2 of metal ion to amine oxide group, while copper– and zinc–polymer complexes seemed to have structures of 1:1 and 1:2 of metal ion to amine oxide group. Furthermore, polymer complexes of poly(DMAEMNO) with poly(methacrylic acid) and poly(acrylic acid) were found to be formed by mixing aqueous solutions of both polymers and also by radical polymerization of the acid monomers in the presence of poly(DMAEMNO). From elemental analysis, thermogravimetric investigation, and measurement of turbidity it was concluded that the resulting polymer–polymer complexes contained more than one acid monomer unit per one N-oxide unit.     

Characterization of organometallic polymers by 13C- and 119Sn-NMR: Configurational/compositional triads in poly(tri-n-butyltin methacrylate/methyl methacrylate)

The 1:1 and 2:1 formulations of the free radical initiated copolymers of methyl methacrylate (MMA) and tri-n-butyltin methacrylate (TBTM), and the homopolymer, poly(TBTM), are characterized by ¹³C- and ¹¹⁹C-NMR structural analyses were performed on the tributyltin-free hydrolyzate, a copolymer of MMA and methacrcylic acid (MAA). Configurational sequencing at the triad level is performed using the α-methyl region of the ¹³C-NMR spectrum. The probability of isotactic (meso) dyad placement at 80°C in the homopolymer (0.19) is determined to be significantly less than the probabilities observed for the copolymers (0.23–0.24). Random compositional sequencing is established for the copolymers through a comparison of the carbonyl regions of the ¹³C-NMR spectra of the hydrolyzates with the carbonyl regions in published spectra of structurally characterized copolymers of MMA and MAA. The ¹¹⁹Sn chemical shift and the tin-carbon J coupling for the polymers are dependent on the solvent employed. This dependence is attributed to electron donor or acceptor interactions between the solvent and the strong Sn? O dipole. The tin-containing copolymers exhibit multiple ¹¹⁹Sn resonances, which appear related to compositional sequencing.     

Structure and properties of poly(methyl methacrylate) particles prepared by a modified microemulsion polymerization

Nanoscale poly(methyl methacrylate) (PMMA) particles were prepared by modified microemulsion polymerization. Different from particles made by traditional microemulsion polymerization, the particles prepared by modified microemulsion polymerization were multichain systems. PMMA samples, whether prepared by the traditional procedure or the modified procedure, had glass-transition temperatures (T_g's) greater than 120 °C and were rich in syndiotactic content (55–61% rr). After the samples were dissolved in CHCl₃, there were decreases in the T_g values for the polymers prepared by the traditional procedure and those prepared by the modified process. However, a more evident T_g decrease was observed in the former than in the latter; still, for both, T_g was greater than 120 °C. Polarizing optical microscopy and wide-angle X-ray diffraction indicated that some ordered regions formed in the particles prepared by modified microemulsion polymerization. The addition of a chain-transfer agent resulted in a decrease in both the syndiotacticity and T_g through decreasing polymer molecular weight. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 733–741, 2004     

Stereoregularity of poly(2-vinylpyridine) and poly-(4-vinylpyridine)

In order to determine the stereoregularity of poly(4-vinylpyridine), 4-vinylpyridine-β,β-d₂ was synthesized from 4-acetylpyridine. The ¹H-NMR spectra of the deuterated and nondeuterated polymers were measured and analyzed. From the ¹H-NMR spectra of poly(4-vinylpyridine-β,β-d₂), triad tacticity can be obtained, while the ¹H-NMR spectra of nondeuterated poly(4-vinylpyridine) give the fraction of isotactic triad. The ¹³C-NMR spectra of poly(4-vinylpyridine) were also observed, and the spectra of C₄ carbon of polymers were assigned by the pentad tacticities. The fraction of isotactic triad of poly(2-vinylpyridine) and poly(4-vinylpyridine) obtained under various polymerization conditions were determined. The radical polymerization and anionic polymerizations with phenylmagnesium bromide and n-butyllithium as catalysts of 4-vinylpyridine gave atactic polymers.     

Degradable alternating polyperoxides from poly(ethylene glycol)‐substituted styrenic monomers with water solubility and thermoresponsiveness

Water soluble alternating copolymers were prepared by oxidative free radical copolymerization of 4‐vinylbenzyl methoxypoly(oxyethylene) ether (PEGSt) and molecular oxygen at 50 °C. NMR spectroscopy established alternate sequence of PEGSt and peroxy bonds ( O O ) along the polymer main‐chain. The obtained polymers show temperature induced hydrophilic to hydrophobic phase separation, confirmed by UV‐visible spectroscopy and dynamic light scattering. The cloud point temperature (T_CP) of the polymers can be tuned by changing the chain length of side‐chain poly(ethylene oxide) and incorporation of hydrophobic methyl methacrylate in the copolyperoxides. Exothermic degradation of these polyperoxides was confirmed by differential scanning calorimetry and the degradation products have been characterized by electron impact mass spectroscopy. Finally, N,N‐dimethylacrylamide was polymerized in the presence of these polyperoxides in toluene, highlighting their potential as polymeric free radical initiator during polymerization of vinyl monomers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2030–2038     

Impact of degree of phosphorylation on intrinsic and thermal properties of poly(styrenephosphonate diethyl ester)s

The intrinsic and thermal characteristics of poly(styrenephosphonate diethyl ester)s (PSP) are described. The properties of the polymer prepared by two synthetic procedures, phosphorylation of monodispersed polystyrene and polymerization of vinylbenzenephosphonate ester, are compared with chloromethylated polystyrene and with each other. Empirical formulas are presented for the relationships between the degree of polymerization, degree of phosphorylation, molecular weight, and intrinsic viscosity (in methanol and toluene). Thermal analysis reveals a sharp drop in T_g with an increase in degree of phosphorylation; T_g of the fully phosphorylated polystyrene is in the range of 9–30°C. The T_g ΔC_p values show significant decrease with augmentation in the degree of phosphorylation, yielding a value of 14 cal g^?1 for the fully phosphorylated polymer, compared with ～ 29 cal g^?1 for the parent polymer. The PSP is shown to have substantial capacity for dissolving heavy metal salts, such as UO₂(NO₃)₂, causing significant elevation in the T_g.     

Thermogravimetric analysis of poly(alkyl methacrylates) and poly(methylmethacrylate-g-dimethyl siloxane) graft copolymers

The thermal stabilities of various poly(alkyl methacrylate) homopolymers and poly(methyl methacrylate-g-dimethyl siloxane) (PMMA-g-PSX) graft copolymers have been determined by thermogravimetric analysis (TGA). As expected, the thermal stabilities of poly(alkyl methacrylates) were a function of the ester alkyl group, and polymerization mechanism. In particular, thermally labile linkages, which result from termination during free radical or nonliving polymerization mechanisms, decrease the ultimate thermal stabilities of the polymers. However, graft copolymers, which were prepared by the macromonomer technique with free radical initiators, exhibited enhanced thermal stability compared to homopolymer controls. A more complex free radical polymerization mechanism for the macromonomer modified polymerization may account for this result. © 1994 John Wiley & Sons, Inc.     

Polymer networks containing crystallizable poly(octadecyl vinyl ether) segments for shape‐memory materials

New polymer networks were prepared by free radical initiated copolymerization of crystallizable α,ω‐bismethacrylate‐terminated poly(octadecyl vinyl ether) (polyODVE) with butyl acrylate (BA). The polyODVE bismacromonomers were obtained by end‐capping the bifunctionally living cationic polymerization of ODVE with 2‐hydroxyethyl methacrylate (HEMA). The segmented networks show a high degree of phase separation over a wide range of compositions. The shape memory properties of a material containing 20 wt.‐% of polyODVE are reported.     

Preparation of isotactic‐rich poly(dimethyl vinylphosphonate) and poly(vinylphosphonic acid) via the anionic polymerization of dimethyl vinylphosphonate

A vinylphosphonate monomer, dimethyl vinylphosphonate (DMVP), has been polymerized by anionic initiators. Anionic polymerization of DMVP with tert‐butyllithium (t‐BuLi) in combination with a Lewis acid, tributylaluminum (n‐Bu₃Al), in toluene proceeded smoothly to give an isotactic‐rich poly(dimethyl vinylphosphonate) (PDMVP) with relatively narrow molecular weight distribution. Although all the PDMVPs were soluble in water, the isotactic‐rich PDMVP was insoluble in acetone and in chloroform which are good solvents for an atactic PDMVP prepared by radical polymerization. The isotactic‐rich PDMVP showed higher thermal property than that of the atactic PDMVP. Moreover, we successfully prepared poly(vinylphosphonic acid) (PVPA) through the hydrolysis of the isotactic‐rich PDMVP, which formed a highly transparent, self‐standing film. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1677–1682, 2010     

Effect on structural relaxation of the poly(methyl‐methacrylate) copolymers chain flexibility

The structural relaxation of poly(methyl‐methacrylate) (PMMA)‐based copolymers with different chain flexibility has been studied by DSC with the classical procedure of the isothermal and dynamical approach. Modified PMMA with different chain flexibility have been prepared by free radical polymerization in solution using a mixture of monomers containing 10 mol % of alkyl methacrylate (i.e., ethyl, buthyl, and hexyl methacrylate). The molecular characteristics of all the prepared copolymers have been performed by a multiangle laser light scattering (MALS) photometer on‐line to a size exclusion chromatography (SEC) system (SEC‐MALS) after and before the thermal treatments, NMR (¹H and ¹³C) and MALDI‐TOF mass spectrometry. A comparison of the apparent relaxation rate (R_H) was appraised from the enthalpy loss by annealing the different samples at the same level of undercooling (T_a = T_g ? 18 °C). It was found an increase of R_H increasing the chain flexibility in the copolymers. Dynamical tests, performed at different cooling rates, have been used to estimate the apparent activation energy of the relaxation process. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 596–607, 2009     

Methacrylic acid and methyl methacrylate oligomers adsorbed to porous isotactic poly(methyl methacrylate) ultrathin films and mechanistic studies of living template polymerization

Methacrylic acid (MAA), methyl methacrylate (MMA), methacrylamide, and oligomers of MAA and MMA were selected as a model of active radical species in living template polymerization using stereocomplex formation. The adsorption behaviors of the aforementioned model compounds were examined toward porous isotactic‐(it‐) poly(methyl methacrylate) (PMMA) ultrathin films on a quartz crystal microbalance, which was prepared by the extracting of syndiotactic‐(st‐) poly(methacrylic acid) (PMAA) from it‐PMMA/st‐PMAA stereocomplexes. The apparent predominant adsorption of oligomers to monomers was observed in both PMAA and PMMA oligomers, suggesting that the mechanism of template polymerization follows the pick up mechanism. Although vinyl monomers were not incorporated into the porous it‐PMMA ultrathin film, both PMMA and PMAA oligomers were adsorbed at the initial stages. However, adsorbed amounts were limited to about 5 and 15% at 0.1 mol L^?1, respectively, which are much smaller values than corresponding st‐polymers. The results imply that radical coupling reaction is prevented during template polymerization to support the resulting living polymerization. ATR‐IR spectral patterns of oligomer complexes and it‐PMMA slightly changed in both cases, suggesting complex formation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5879–5886, 2008     

Ionic conductivity and compatibility studies of blends of poly(methyl methacrylate) and poly(propylene glycol) complexed with LICF3SO3

Stable to atmospheric moisture, adhesive and transparent polymer electrolytes have been prepared by blending poly(methyl methacrylate) (PMMA) with poly(propylene glycol)-425/LiCF₃SO₃ complexes. The blending of the polymers has been achieved by a method developed in our laboratory: free radical polymerization of methylmethacrylate in the polyether/salt matrix. A series of polymer blend complexes varying in PMMA content (up to 20% by weight) and oxygen/metal ratios (25, 16, and 8) have been synthesized and their properties studied. All the samples prepared in this study were found to be optically clear unlike the higher molecular weight poly(propylene glycol)-2000 (PPG-2000) system which required a minimum salt concentration to compatibilize a specific amount of PMMA with PPG. The mechanisms by which the salt holds the otherwise incompatible polymers together in a single phase have been investigated by FT-IR. Our studies show a weak coupling of the ether oxygens in the PPG with the ester groups of the PMMA through the lithium cations. Discrete changes has been observed in the FT-IR spectrum of PMMA when doped with the lithium salt hitherto unnoticed with other dopants. Gel permeation chromatography results of the PMMA samples isolated from the solid electrolytes indicate the molecular weight to vary between 43000 and 121000 with relatively narrow distributions, 1.6?2.0. The ionic conductivities of the polymer blend electrolytes were fairly high (10^?5 S/cm) at room temperature. The PMMA neither significantly influenced the T_g of the blend complexes nor effected the ionic conductivities drastically. The ionic conductivity as a function of temperature followed the empirical Vogel-Tammann-Fulcher equation. The blending of PMMA with PPG/LiCF₃SO₃ complexes was found to impart good adhesiveness to the solid electrolytes while making them stable to atmospheric moisture. © 1992 John Wiley & Sons, Inc.     

The Relationship of Reaction Temperature,Tg and Rich‐Syndiotacticity of Poly(alkyl methacrylate)s in Modified Microemulsion Polymerization

Nanoscale poly(alkyl methacrylate)s including poly(methyl methacrylate), poly(ethyl methacrylate), poly(cyclohexyl methacrylate), poly(iso‐butyl methacrylate) and poly(benzyl methacrylate) were prepared by a modified microemulsion polymerization procedure. NMR analysis suggested that these poly(methacrylate)s samples were higher in syndiotactic content, lower in isotactic content and the glass transition temperatures (T_gs) of them were also higher than those reported in the literature. The tacticities of the poly(methacrylate)s, beside the restricted volume effect of nanoparticles during the modified microemulsion polymerization, were mainly influenced by the reaction temperature, the lower the reaction temperature, the higher the syndiotacticity of the products. The syndiotacticity of the product decreased obviously when the polymerization was carried out at a temperature far above the T_g of the resulting polymer. It was also shown that the tacticity of the polymer was affected by the monomer structure, a monomer with the bulkier alkyl side group would liable to result in a polymer with richer syndiotacticity. Possible mechanism of rich‐syndiotacticity was also discussed.     

Synthesis and characterization of poly(phosphon acetal) derivatives of poly(vinyl alcohol)

Preparation of poly(phosphonoacetals) (PPA) by transacetalation of poly(vinyl alcohol) with diethyl-phosphonoacetal is described. PPA with a degree of substitution of 60% is an alcoholsoluble polymer with a glass transition temperature (T_g) of 67°C. High resolution ¹H and ¹³C NMR spectra reveal the presence of hemiacetals alongside the six-membered acetal ring with an approximate ratio of 2:8 of these substituents. A possible correlation between the microtacticity of the parent PVA and the structure of PPA is indicated; the syndiotactic and isotactic sequences on the parent polymer controls the relationship between the two pendant groups.     

Stereocontrol in radical polymerization of acrylic monomers

A clear effect of Lewis acids, such. as scandium trifluoromethanesulfonate [Sc(OTf)₃], on stereocontrol during the radical polymerization of a designed monomer, benzyl α-(methoxymethyl)acrylate was found. This Lewis acid also influenced the stereochemistry in the radical polymerization of methyl methacrylate giving a less syndiotactic and more isotactic polymer, although many Lewis acids were not effective. A catalytic amount of Lewis acids, such as Y(OTf)₃ and Yb(OTf)₃, also significantly enhanced isotactic-specificity during the radical polymerization of acrylamide and its derivatives, N-isopropylacrylamide (NIPAM) and N,N-dimethylacrylamide. Obvious solvent and temperature effects on tacticity were observed in these polymerizations, and poly(NIPAM) with >80% triad isotactic content has been obtained in the presence of Lewis acids.     

Stereoregularity of poly(2-vinylpyridine) determined by 1H-NMR and 13C-NMR spectroscopy

In order to determine the stereoregularity of poly(2-vinylpyridine), 2-vinylpyridine-β,β-d₂ was synthesized. The ¹H-NMR spectra of the deuterated polymer in D₂SO₄ and o-dichlorobenzene solutions showed three peaks, which were assigned to triad tacticities. Since the absorptions of heterotactic and syndiotactic triads of methine protons overlap those of methylene protons in nondeuterated polymers, only isotactic triad intensities can be obtained from the ¹H-NMR spectra of nondeuterated poly(2-vinylpyridine). The ¹³C-NMR spectra of poly(2-vinylpyridine) were obtained in methanol and sulfuric acid solutions. In methanol solution the absorption was split into three groups, which cannot be explained by triads, and in sulfuric acid solution several peaks were observed. These splittings may be due to pentad tacticity. The results show that poly(2-vinylpyridine) obtained by radical polymerization is an atactic polymer.