Longitudinal DC electric discharge in a supersonic air flow

A longitudinal dc electric discharge in a submerged high-pressure supersonic air jet is described. Photographs of the discharge are provided. The experimental voltage across the discharge gap and the discharge current are given for two resistances of the resistor that limits the discharge current over a certain range of the discharge channel length along the air flow. The current-voltage discharge characteristic is provided at a constant discharge length. The main discharge characteristics are obtained from a comparison of the experimental and theoretical results calculated on the basis of the simplest model.     

介质阻挡放电丝模式和均匀模式转化的特性

利用水电极介质阻挡放电装置,采用电学方法和发射光谱,研究了空气中介质阻挡放电从微放电丝模式向均匀放电模式转化的过程. 结果表明,大气压下增大外加电压或者电压一定减小气压,放电都能够从微放电丝模式过渡到均匀模式. 高气压下放电为流光击穿而低气压下为辉光放电. 利用放电发射光谱,研究了高能电子比例随实验参数的变化. 结果表明气压减小时高能电子比例增大,电压增加时高能电子减少. 利用壁电荷理论对以上实验结果进行了定性分析. 结果对介质阻挡均匀放电的深入研究具有重要价值. 关键词： 介质阻挡放电 光学发射谱 微放电丝 均匀放电模式     

介质阻挡放电丝模式和均匀模式转化的特性

利用水电极介质阻挡放电装置，采用电学方法和发射光谱，研究了空气中介质阻挡放电从微放电丝模式向均匀放电模式转化的过程. 结果表明，大气压下增大外加电压或者电压一定减小气压，放电都能够从微放电丝模式过渡到均匀模式. 高气压下放电为流光击穿而低气压下为辉光放电. 利用放电发射光谱，研究了高能电子比例随实验参数的变化. 结果表明气压减小时高能电子比例增大，电压增加时高能电子减少. 利用壁电荷理论对以上实验结果进行了定性分析. 结果对介质阻挡均匀放电的深入研究具有重要价值.     

大气中介质阻挡放电发光的时间特性

采用光学方法测量了大气中介质阻挡放电丝极模式的时间特性，揭示了介质阻挡放电动力学过程的时间规律。实验表明，在驱动电压的产周内的放电团簇是由多个放电脉冲构成的，放电脉冲的持续时间为30-50ns，相邻放电脉冲之间的间歇时间为几百ns。本工作的结果对介质阻挡放电的应用有重要意义。     

横向表面放电光泵浦源特性研究

 介绍了一种用以泵浦XeF(C-A)激光的横向表面放电辐射源,比较详细地研究了这种泵浦源的放电击穿特性、放电电流与充电电压及不同气体介质的关系、表面放电均匀性以及不同气体成分对表面放电辐射特性的影响。得到了放电击穿时间、放电峰值电流随充电电压、不同气体介质变化的曲线;分析了提高放电均匀性的途径,在电极长50cm、间距6cm、充电电压25kV条件下获得了均匀放电。获得了各种实验条件下放电辐射的光谱曲线;通过对辐射光谱的分析,研究了有利于光解离XeF₂的最佳实验条件,当p_Ar:p_N2=1:1时,放电在远紫外波段产生的辐射最强。     

常压介质阻挡放电的特性研究及应用前景

常压介质阻挡放电由于其具有均匀、散漫、稳定,而且不需要真空系统等优点,正日益受到人们的重视和研究。文章给出了常压介质阻挡放电的研究进展,包括实验装置、实验条件、放电机理以及最新的诊断方法,还介绍它在材料表面改性、环境工程、食品加工等方面的应用前景。     

一种静电放电模拟装置的设计

近年来,与静电放电(ESD)领域相关联的气体放电理论、材料科学和电测技术等新兴学科的不断研究和发展,已逐渐由实验科学阶段走向实际应用阶段。同时,人们也逐渐发现静电放电给人类造成的危害是十分惊人的,它不仅能够影响人类的正常生活,更是限制了自动化生产水平的提高。基于传统静电放电的模拟装置设备单一、功能局限,无法满足静电放电全方位、多用途的实验要求,为解决这一问题,设计和实现了包含电极模拟、方位变换、电路传输的完整的实验模拟装置。该装置主要由底座、支撑架、金属球、放电针、绝缘环、方位表盘等6部分组成,能够满足不同极化方向电磁场条件下的实验要求,同时还能够实现对不同高度、不同位置条件下的电磁场的基本极化方向进行判断识别。该系统具有一定的实验创新性和先进性,能够有效地满足各类电磁实验的需要,为研究电磁诱发静电放电实验提供了有力的硬件支持。     

Development of gas-dynamic perturbations propagating from a distributed sliding surface discharge

Results are presented from experimental studies of the plasma layer structure of a distributed sliding surface discharge excited in quiescent air and in a uniform gas flow behind a plane shock wave at gas densities of 0.03–0.30 kg/m³. The dynamics of weak shock waves generated after discharge initiation was studied. According to the experimental and simulation results, 40% of the discharge energy transforms into heat within a surface gas layer in the energy input stage, which lasts up to 200 ns.     

Current-voltage characteristics of a reflex discharge with a hollow cathode and self-heating electrode

Results are presented from experimental studies of the current-voltage characteristics of a reflex discharge with a self-heating electrode used in a source of atomic hydrogen. The processes occurring in a discharge cell and governing the main features of the characteristics obtained are investigated theoretically. An explanation of the general features of the discharge is proposed. It is shown that an abrupt decrease in the discharge voltage with increasing hydrogen flow rate is associated with penetration of the plasma into the hollow cathode and the ignition of a hollow cathode discharge. It is demonstrated that, as the discharge current increases, the glow discharge gradually transforms into an arc discharge with a heated cathode.     

Thermal ionization instability of an air discharge plasma in a microwave field

Results are presented from experimental studies of the initial stage of an air discharge initiated in a linearly polarized quasi-optical microwave beam. The discharge was excited at an air pressure at which the electron-neutral collision frequency in the discharge plasma was considerably higher than the circular frequency of the electromagnetic field and at a microwave field amplitude close to the threshold field for air breakdown. The experiments revealed relatively bright plasma channels stretched along the microwave electric field. The development rate of these channels and their characteristic transverse dimensions are estimated. A comparison of the experimental data and theoretical estimates indicates that the channels observed arise due to the onset of thermal ionization instability in the microwave discharge plasma.     

Experimental study of the effect of a longitudinal magnetic field on the cathode parts of a glow discharge in helium

The effect of a longitudinal magnetic field on the electrical and optical properties of negative glow and the Faraday dark space of a glow discharge in helium is experimentally studied at a discharge current J_d=11 mA and a pressure of 100–150 Pa in the discharge chamber. An experimental setup is designed and described. A longitudinal electric field is found to be absent in the region of negative glow and the Faraday dark space in both the presence and the absence of the magnetic field. The magnetic field is shown to decrease the voltage of the glow discharge and to increase the total discharge luminosity and the intensities of some spectral lines by a factor of 10–12. The experimental results are explained.     

Observation of the Second Mode of the Multipactor Discharge in Crossed Fields

Radiophysics and Quantum Electronics - We detect the second discharge mode in the process of experimental studies of a one-sided multipactor discharge in crossed fields (microwave electric field...     

Creepage discharge along the surface of solid dielectrics in water

Experimental data is given for the discharge voltage for creepage discharge in tap water as a function of the thickness, flange length, (creepage path over dielectric surface), permittivity of the solid dielectric, field configuration, polarity of the applied voltage pulse, and a number of other parameters. The experimental data discussed are the delay time with dielectric flange sparkover by creepage discharge, the average discharge propagation rate for both polarities, and the creepage discharge current and leakage resistance.     

基于电晕放电的大功率LED散热研究

针对大功率LED芯片的散热问题,提出了一种基于电晕放电原理的离子风散热方案。通过试验,研究了电晕放电的电学性能,同时探寻了放电电压对制冷效果的影响以及温降随电晕放电功率的变化规律。结果表明,放电间距相同时,对发生器施加负电晕能够在较低的电压下产生离子风,降温效果显著。电晕电流平方根与放电电压呈线性关系。电晕放电功率为1.5 W、放电间距为10 mm时,散热效果最好。     

Possible High Power Laser Construction Using a New Discharge Type-Heated Cathode Discharge in the Copper Vapours Continuously Evaporated from the Anode

The possibility to build a high power copper laser using a new type of discharge – heated cathode discharge in the copper vapours continuously evaporated from a melted spot on the anode surface is analysed. From the experimental data on this new discharge type, the equivalent pressure of the copper atoms in the discharge space has been obtained. This pressure can be as high as 1 torr. The density of the power in the discharge volume is evaluated to be more than 1 kW/cm³.     

An Experimental Study of Noble Gas Isotope Separation by DC ArcDischarge

Experiments are undertaken on the isotope separation by DC discharge through a narrow capillary of gaseous neon, argon and krypton of natural isotopic abundance. It is confirmed that the heavier isotopes become enriched in the region of cathode, and the lighter isotopes in that of anode. The effect on the obtainable separation factor brought by differences in experimental conditions is examined by changing the capillary tube diameter, tube length, discharge current and discharge pressure. The separation factor improves with increasing the tube length and the discharge current, and with decreasing the discharge pressure and the tube diameter. Ion density and electron temperature are measured in the positive column to compare the present experimental results with existing theories. The order of the isotope enrichment factor is well explained by the theory of the ion diffusive friction force onto isotopically different neutral molecules, together with the theory of the ionization degree of the different isotopic species.     

New insights into corona discharge surface ionization of polyethylene terephthalate via a combined computational and experimental assessment

The aim of the present work is to demonstrate the influence of corona discharge ionization on chemical and physical properties of polyethylene terephthalate (PET) fibers using computational and experimental studies. In the computational section, the vibrational frequencies of proposed models for PET before and after corona discharge treatment were predicted in the liquid phase at both the B3LYP/6-31G/COSMO and B3PW91/6-31G/COSMO level of theories using the harmonic approximation. When compared to B3LYP, the frequencies obtained for the B3PW91 show a better linear correlation with the experimental data. Furthermore, experimental studies were carried out by the use of Fourier transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), and reflectance spectroscopy (RS). Experimental evidence indicated that the corona discharge modifies the surface of fibers and also increases the reactivity of PET toward cationic dyes. Our combined computational and experimental parametric study clearly confirms that the changes occurred on the PET surface due to corona discharge ionization.     

Distribution of the electromagnetic field of a high-frequency capacitive filamentary discharge operating at atmospheric pressure

Results are presented from measurements of the electromagnetic field of a high-frequency capacitive discharge operating in air and argon at atmospheric pressure. The experimental results are compared to those obtained for a high-frequency torch discharge.     

Simulation of transition from Townsend mode to glow discharge mode in a helium dielectric barrier discharge at atmospheric pressure

The dielectric barrier discharge characteristics in helium at atmospheric pressure are simulated based on a one-dimensional fluid model. Under some discharge conditions, the results show that one discharge pulse per half voltage cycle usually appears when the amplitude of external voltage is low, while a glow-like discharge occurs at high voltage. For the one discharge pulse per half voltage cycle, the maximum of electron density appears near the anode at the beginning of the discharge, which corresponds to a Townsend discharge mode. The maxima of the electron density and the intensity of electric field appear in the vicinity of the cathode when the discharge current increases to some extent, which indicates the formation of a cathode-fall region. Therefore, the discharge has a transition from the Townsend mode to the glow discharge mode during one discharge pulse, which is consistent with previous experimental results.