磺化修饰结合离子交换色谱和生物质谱富集鉴定含组氨酸肽段

通过在肽段的N端引入磺酸基,从而使含组氨酸的肽段与其他肽段在pH<3.0的条件下产生电荷差异,建立了一种基于强阳离子交换色谱(SCX)结合生物质谱富集鉴定含组氨酸肽段的方法,并以含有组氨酸的标准蛋白质为模型,进行了方法学考察。结果表明,经N端磺酸化后,含组氨酸的肽段能有效地被阳离子交换色谱富集,且在肽的N端引入磺酸基促进了肽的裂解,使之产生简单而信息丰富的二级质谱图,从而得到完美的质谱鉴定结果。这说明磺化修饰结合强阳离子交换色谱用于含组氨酸肽段的富集鉴定是可行的,且具有在蛋白质组研究中应用的潜力。     

磺化间规聚苯乙烯的表征

间规聚苯乙烯(sPS)是一种新型结晶性工程塑料,熔点达270℃,具有结晶速度快、耐热性好、耐化学腐蚀性优良等特点,可广泛用于汽车、电子、机械等行业,极具开发意义,但是由于sPS脆性大,抗冲击性差,故通过化学改性在sPS的苯环上引入极性基团,用于制成共混合金与复合材料,是提高材料韧性,开拓sPS用途的重要途径。     

Composition dependence of glass transition temperature of sulfonated-polystrene ionomers

The glass transition temperatures of alkali (Na, K, Rb, Cs) and alkaline-earth (Ba, Sr, Ca, Mg) ionomers of sulfonated polystyrenes (PSSA) with 3.4, 6.9, 12.7, and 16.7% of the styrene moieties sulfonated are reported. For the alkali-metal PSSA ionomers, T_g depends on the degree of sulfonation, at least up to 13%, but not strongly on the nature of the cation. For the alkaline-earth analogs T_g does not depend strongly on either the cation or the degree of sulfonation until the 16.7% level is reached. These and other reported data are discussed in terms of the role of cations in determining morphology.     

Preparation and Characterization of Sulfonated Polyacrylamide from Polyacrylonitrile for Proton Conductive Membranes

Polyacrylonitrile (PAN) was sulfonated and the membranes prepared were then characterized by the FTIR‐ATR, Elemental Analyzer EA, TGA, DSC, SEM, Tensile, Water uptake and Impedance tests. FTIR‐ATR spectra show the substitution of the sulfonic group (SO₃) to the main stem of the chain and also the hydrolysis of the cyanide group to amide group confirm the conversion of polyacrylonitrile to sulfonated polyacrylamide. Increase in water uptake property as compared to pure PAN also confirms the sulfonation process has occurred. Thermal properties also confirm the enhancement of the materials after sulfonation reaction.     

新型磺化聚酰亚胺膜的合成与表征

合成了4,4’-二(间氨基苯氧基)联苯-3,3’-二磺酸(mBAPBDS)单体, 采用红外光谱和核磁共振等方法对其结构进行了表征. 使用mBAPBDS, 2-(对胺基苯基)苯并噁唑-5-胺(APBA)和1,4,5,8-萘四甲酸二酐(NTDA)共聚合成了含有噁唑结构的新型磺化聚酰亚胺(NTDA-mBAPBDS/APBA), 通过控制磺化二胺与非磺化二胺的比例来控制磺化程度. NTDA-mBAPBDS/APBA共聚物表现出较好的溶解性、成膜性能和良好的热稳定性, 其磺酸基团分解温度高于300 ℃. 采用溶液浇铸法制备了磺化聚酰亚胺(SPIs)膜, 对膜的吸水率、溶胀度和质子电导率等性能进行了初步的研究. 结果表明, SPIs膜具有适当的吸水率和良好的尺寸稳定性, 其室温电导率在4.72×10－3和9.60×10－3 S/cm之间, 接近于相同条件下Nafion®117的电导率(9.80×10－3 S/cm).     

Isotope-coded N-terminal sulfonation of peptides allows quantitative proteomic analysis with increased de novo peptide sequencing capability

Recently various methods for the N-terminal sulfonation of peptides have been developed for the mass spectrometric analyses of proteomic samples to facilitate de novo sequencing of the peptides produced. This paper describes the isotope-coded N-terminal sulfonation (ICenS) of peptides; this procedure allows both de novo peptide sequencing and quantitative proteomics to be studied simultaneously. As N-terminal sulfonation reagents, 13C-labeled 4-sulfophenyl[13C6]isothiocyanate (13C-SPITC) and unlabeled 4-sulfophenyl isothiocyanate (12C-SPITC) were synthesized. The experimental and reference peptide mixtures were derivatized independently using 13C-SPITC and 12C-SPITC and then combined to generate an isotopically labeled peptide mixture in which each isotopic pair differs in mass by 6 Da. Capillary reverse-phase liquid chromatography/tandem mass spectrometry experiments on the resulting peptide mixtures revealed several immediate advantages of ICenS in addition to the de novo sequencing capability of N-terminal sulfonation, namely, differentiation between N-terminal sulfonated peptides and unmodified peptides in mass spectra, differentiation between N- and C-terminal fragments in tandem mass spectra of multiply protonated peptides by comparing fragmentations of the isotopic pairs, and relative peptide quantification between proteome samples. We demonstrate that the combination of N-terminal sulfonation and isotope coding in the mass spectrometric analysis of proteomic samples is a viable method that overcomes many problems associated with current N-terminal sulfonation methods.     

磺化锌酞菁与胶束间的相互作用

用吸收光谱和荧光光谱研究了不同磺化程度酞菁与不同胶束间的相互作用并计算了结合常数。低磺化程度酞菁与三类胶束间均可发生相互作用,其标志是胶束的解聚作用;而高磺化程度酞菁与此显著不同,可结合在阳离子胶束表面,与非离子胶束无明显作用,而阴离子胶束对磺化酞菁只起促聚作用。用磺化程度变化导致酞菁分子体积、电荷及疏水性变化解释了实验结果。     

燃料电池质子交换膜用新型磺化聚芳醚酮的合成和性能表征

报道了一种新型磺化聚芳醚酮材料的合成方法, 通过引入取代基对聚芳醚主链进行保护，用氯磺酸直接磺化方法在聚芳醚酮高分子侧基上引入磺酸功能基, 实现了聚合物磺化结构的可控定位合成, 得到了稳定性较好的磺化聚芳醚酮. 通过核磁共振(NMR)、 热重(TG)和凝胶渗透色谱(GPC)等分析方法对其结构及性能进行了表征. 用溶液浇膜法制备了质子交换膜, 考察了膜的各种性能, 并与商用Nafion膜进行了比较, 其导电性、 热稳定性和吸水性远优于Nafion膜, 抗氧化性、抗水解性和机械强度也达到了较高的指标.     

Morphological studies and ionic transport properties of partially sulfonated diblock copolymers

The morphological behavior of partially sulfonated polystyrene-block-poly(ethylene-alt-propylene) (PS-PEP) membranes cast from tetrahydrofuran (THF) solutions were investigated by small-angle X-ray scattering (SAXS) and atomic force microscopy (AFM).The uptakes of methanol and water increase as the sulfonation degree increases, the methanol uptake being overwhelmingly greater than the water uptake. The conductivity increases almost exponentially with increasing sulfonation degree of polystyrene units. Clusters of sulfonated units that are formed in the solution used for casting membranes persist in the solid state after evaporation. In contact with water, swelling of the membranes proceeds predominantly in these clusters. The original lamellar morphology of the diblock copolymer is progressively deformed with increasing degree of sulfonation by the presence of the clusters containing ion-rich sequences of sulfonated polystyrene blocks.     

磺化壳聚糖的制备及其对生长因子活性的保护作用

以壳聚糖为基材,分别以氯磺酸、三甲胺.三氧化硫和丙磺酸内酯为磺化试剂,制备了3,6-O-磺化壳聚糖(OCS)、2-N-磺化壳聚糖(NCS)和2-N-磺丙基壳聚糖(PCS)3种磺化壳聚糖.采用红外光谱、核磁共振谱证明了磺化壳聚糖的结构,元素分析测定了磺化壳聚糖的磺化率.以组织修复过程中一种重要的活性因子——碱性成纤维细胞生长因子(bFGF)为目标因子,通过体外成纤维细胞培养实验,评价了不同磺化壳聚糖对bFGF活性的保护能力.结果显示,相对于未改性壳聚糖(CS),磺化壳聚糖对成纤维细胞的形态无显著影响.细胞活性检测结果显示,OCS和PCS对bFGF活性无明显的保护能力;NCS能有效提高bFGF促进成纤维细胞活性的能力,其对bFGF活性的保护能力可达肝素70%左右.磺化壳聚糖的bFGF活性保护能力不随磺化率的改变而变化.     

SULFONATION OF A NEW POLYETHERETHERKETONE PREPARED FROM PHENOLPHTHALEIN

A novel polyetheretherketone (PEK-C) prepared from phenolphthalein has been synthesized. In order to improve some of its properties for application in high performance membrane, the PEK-C has been sulfonated with concentrated sulfuric acid. Degree of sulfonation can be regulated by controlling the temmperature and time of sulfonation. The characterization of the sulfonated PEK-C in sodium salt form has been made by IR, ~1H NMR and ~(13)C NMR etc. It is shown that the sulfonation appears to take place exclusively in the ortho position to phenolic ether of phenolphthalein unit. The result is in agreement with theoretical deduction. Some properties of the sulfonated PEK-C, such as solubility, transition temperature, thermal degradation and hydrophilicity have also been discussed.     

Heterogeneous fluorine-containing surface macro-, micro- and nanostructures in polymer films and their applications

The methods of heterogeneous macro-, micro- and nanostructure formation on the surfaces of polymer films via their modification with gaseous fluorine have been considered. The successive fluorination and sulfonation of polyolefin films allows the synthesis of heterounit bi- and polyfunctional molecular fragments, thereby providing controlled chemical structuring at the nanolevel within a macromolecular segment. The combined use of the above methods of polymer-surface modification and intermediate film deformation under uniaxial tension results in the formation of surface microzones with fluorinated and sulfonated structures. Fluorinated and sulfonated macro- and microzones are formed via mechanical fracture of the fluorinated layer before sulfonation or via shielding of the polymer surface before sulfonation according to a given pattern through photolithographic methods. The practical applications of polymer films with heterogeneous surface structures are discussed.     

Sulfonated and sulfoacylated poly(styrene-divinylbenzene) copolymers as packing materials for cation chromatography

Three different types of cation exchangers were produced from four basic poly(styrene-divinylbenzene) substrates with different properties. Porous PS-DVB resin beads were functionalized by sulfonation and sulfoacylation under various conditions to produce sulfonated resins with exchange capacities of 0.03-1.80 mM g(-1). The matrix with 50% of cross-linking is most suitable for updating by the proposed technique. Sulfuric and chlorosulfonic acids were used as the reagents for sulfonation. The sulfonating conditions, capacities, and the technique of the synthesis are given. The effects of parameters of the sulfonation reaction and the composition of the reactionary mixture on ion-exchange capacity of the sorbents were investigated. Selectivity and efficiency of the separation of some inorganic cations and derivatives of amines and hydrazines on the resins obtained are compared by ion chromatography with conductometric detection. As a result, the sulfoacylated resin was proved more efficient for the separation of these analytes. The resolution of the analytes strongly depends on the degree of functionalization. The best performance about 19,000 plates m(-1) was obtained using the sulfopropionylated beads with an ion-exchange capacity of 0.3 mM g(-1). The prepared sulfoacylated cation exchanger was compared with the commercially available Dionex CS-12 packing material. It was found that the separation of alkaline ions and 1,1-dimethylhydrazine (UDMH) were much better that those for the commercial material.     

BIOLOGICAL ACTIVITIES OF PHTHALOCYANINES-X. SYNTHESES AND ANALYSES OF SULFONATED PHTHALOCYANINES

Abstract— Synthetic methods to obtain selectively sulfonated metallo phthalocyanines are compared. Both condensation and direct sulfonation procedures lead to mixtures of mono- to tetrasulfonated products which are resolved by reverse phase liquid chromatography in buffered aqueous-methanol. The proportion of sulfonated derivatives is examined as a function of the starting reagents in the case of the condensation method, and as a function of the temperature and reaction time in the case of the direct sulfonation procedure. The number of sulfonate groups per phthalocyanine molecule is determined by oxidative degradation of the phthalocyanine ring followed by quantitative chromatographic analysis of the sulfophthalamide and phthalamide fragments.     

Preparation and characterization of monovalent cation selective sulfonated poly(ether ether ketone) and poly(ether sulfone) composite membranes

Highly charged cation permeable composite membranes were prepared by blending of sulfonated poly(ether sulfone) (SPES) with sulfonated poly(ether ether ketone) (SPEEK) in 0 to 90% weight ratio, to adjust the hydrophobic properties and ion selective nature. Extent of sulfonation was confirmed by 1H NMR and ion exchange capacity and degree of sulfonation depending on blending composition. These membranes were characterized as a function of weight fraction of SPEEK by recording ion-exchange capacity, water uptake, thermogravimetric analysis, membrane conductivity and membrane potential in equilibration with different electrolytic solutions. Membrane permselectivity and solute flux were estimated using these data on the basis of non-equilibrium thermodynamic principles and for observing the selectivity of different membranes for mono- or bivalent counter-ions. It was observed that relative selectivity for monovalent in comparison to bivalent counter-ions were increased with the decrease in SPEEK content in the composite membrane matrix. The range of SPEEK content in the blend from 60 to 80% appears the most suitable for the selective separation of monovalent ions from bivalent ions. Furthermore, highly charged nature and stabilities of these membranes extend their applications for the electro-assisted separations of similarly charged ions as well as other electro-membrane processes.     

Preparation of raspberry-like silica microcapsules via sulfonated polystyrene template and aniline medium assembly method

Raspberry-like composite particles and microcapsules were prepared with anionic sulfonated polystyrene (PSS) particles as templates and cationic aniline monomer as assembly medium. With the help of the sulfonated microgel shells, aniline and silica particles could not only adsorbed onto template surfaces but also go inward shells and finally form microcapsules with varied silica shell thickness. The sulfonation extent of PSS particles first climbed up and then decreased with sulfonation time due to the competition of sulfonation reaction and PSS chain detachment. The silica content in composite particles and shell thickness of microcapsules followed similar trend with sulfonation extent. The choice of aniline as assembly medium was checked by comparing with methyl methacrylate and [2-(methacryloyloxy) ethyl] trimethylammonium chloride, and it was found that the cationic and water-insoluble properties of aniline are both important for the composite efficiency.     

PBMA-b-PSt磺化嵌段离聚体在DMF溶液中的聚集行为

采用激基缔合物荧光光谱法研究了轻度磺化聚甲基丙烯酸丁酯－b－聚苯乙烯（PBMA-b－PSt）嵌段离聚体在极性溶剂N，N－二甲基甲酰胺（DMF）溶液中的聚集行为；发现嵌段离聚体的磺化度和浓度强烈影响溶液中聚合物链的聚集态结构，不同的磺化度样品具有不同的临界聚集浓度；随磺化度增加，聚合物链缠绕密集，形成具有多苯环的聚集体，而且当磺化度为摩尔分数x＝3．59％时，荧光发射光谱最大发射峰波长出现最大红移，临界聚集浓度最低，说明最容易形成多苯环聚集体，该磺化点可以认为是磺化聚甲基丙烯酸丁酯－b－聚苯乙烯体现离聚体行为和聚电解质行为的临界磺化度。     

Synthesis of sulfonated poly(imidoaryl ether sulfone) membranes for polymer electrolyte membrane fuel cells

New sulfonated poly(imidoaryl ether sulfone) copolymers derived from sulfonated 4,4′‐dichlorodiphenyl sulfone, 4,4′‐dichlorodiphenyl sulfone, and imidoaryl biphenol were evaluated as polymer electrolyte membranes for direct methanol fuel cells. The sulfonated membranes were characterized with Fourier transform infrared spectroscopy, thermogravimetric analysis, and proton nuclear magnetic resonance spectra. The state of water in the membranes was measured with differential scanning calorimetry, and the existence of free water and bound water was discussed in terms of the sulfonation level. The 10 wt % weight loss temperatures of these copolymers were above 470 °C, indicating excellent thermooxidative stability to meet the severe criteria of harsh fuel‐cell conditions. The proton conductivities of the membranes ranged from 3.8 × 10^?2 to 5 × 10^?2 S/cm at 90 °C, depending on the degree of sulfonation. The sulfonated membranes maintained the original proton conductivity even after a boiling water test, and this indicated the excellent hydrolytic stability of the membranes. The methanol permeabilities ranged from 1.65 × 10^?8 to 5.14 × 10^?8 cm²/s and were lower than those of other conventional sulfonated ionomer membranes, particularly commercial perfluorinated sulfonated ionomer (Nafion). The properties of proton and methanol transport were discussed with respect to the state of water in the membranes. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5620–5631, 2005     

Macromolecular dynamics of sulfonated poly(styrene-b-ethylene-ran-butylene-b-styrene) block copolymers by broadband dielectric spectroscopy

Macromolecular dynamics of sulfonated poly(styrene-b-ethylene-ran-butylene-b-styrene) (sSEBS) triblock copolymers were investigated using broadband dielectric spectroscopy (BDS). Two main relaxations corresponding to the glass transitions in the EB and S block phases were identified and their temperature dependences were VFT-like. T_g for the S block phase shifted to higher temperature due to restrictions on chain mobility caused by hydrogen bonded SO₃H groups. While the EB block phase T_g appeared to remain constant with degree of sulfonation in DMA experiments, it shifted somewhat upward in BDS spectra. A low temperature relaxation beneath the glass transition of the EB block phase was attributed to short range chain motions. The Kramers–Krönig integral transformation was used to calculate conductivity-free loss permittivity spectra from real permittivity spectra to enhance true relaxation peaks. A loss permittivity peak tentatively assigned to relaxation of internal S-EB interfacial polarization was seen at temperatures above the S block phase glass transition, and the temperature dependence of this relaxation was VFT-like. The fragilities of the EB and S block domains in sulfonated SEBS decreased after sulfonation. The temperature dependence of the dc conduction contribution to sSEBS loss spectra also followed VFT-like behavior and S block segmental relaxation time correlated well with conductivity according to the fractional Debye–Stokes–Einstein equation.