Photoelectrochemical H2 Evolution with a Hydrogenase Immobilized on a TiO2‐Protected Silicon Electrode

The combination of enzymes with semiconductors enables the photoelectrochemical characterization of electron‐transfer processes at highly active and well‐defined catalytic sites on a light‐harvesting electrode surface. Herein, we report the integration of a hydrogenase on a TiO₂‐coated p‐Si photocathode for the photo‐reduction of protons to H₂. The immobilized hydrogenase exhibits activity on Si attributable to a bifunctional TiO₂ layer, which protects the Si electrode from oxidation and acts as a biocompatible support layer for the productive adsorption of the enzyme. The p‐Si|TiO₂|hydrogenase photocathode displays visible‐light driven production of H₂ at an energy‐storing, positive electrochemical potential and an essentially quantitative faradaic efficiency. We have thus established a widely applicable platform to wire redox enzymes in an active configuration on a p‐type semiconductor photocathode through the engineering of the enzyme–materials interface.     

Photoelectrochemical Behavior of Sn‐Doped α‐Fe2O3 Photoanode with Different Reducer

Hematite has been considered as one of the most promising photoanode candidates for solar water‐splitting. However, its photoelectrochemical (PEC) efficiency is largely constrained by its sluggish oxygen evolution reaction. In this work, the photoelectrochemical performance of hematite was investigated in electrolytes containing different sacrificial agent. The photocurrent densities, onset potential, charge transfer resistance, Helmholtz capacitance at semiconductor liquid junctions (SCLJs), and their correlations were systematically studied. It was found that the onset potential is around the C_H peak potential and is related to the photovoltage. The surface states pinning the Fermi levels of the hematite photoanode are related to the adsorbed water molecules regardless of the sacrificial agents in the electrolyte.     

Chemical Vapor Deposition of FeOCl Nanosheet Arrays and Their Conversion to Porous α‐Fe2O3 Photoanodes for Photoelectrochemical Water Splitting

FeOCl nanosheet arrays were deposited on fluorine‐doped tin oxide glass substrates through a chemical vapor deposition method and further converted to hematite porous nanosheet arrays. A much enhanced photocurrent was obtained for such hematite films, which was three times higher than that of a planar hematite film at 1.23 V versus a reversible hydrogen reference electrode.     

5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成

以5-雄烯二醇为原料,用微生物转化的方法合成了两个重要的神经甾体5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇。所用菌种总枝毛霉为我们自己筛选,并首次应用于5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成中。     

γ‐Butyrolactone Copolymerization with the Well‐Documented Polymer Drug Carrier Poly(ethylene oxide)‐block‐poly(ε‐caprolactone) to Fine‐Tune Its Biorelevant Properties

Polymeric drug carriers exhibit excellent properties that advance drug delivery systems. In particular, carriers based on poly(ethylene oxide)‐block‐poly(ε‐caprolactone) are very useful in pharmacokinetics. In addition to their proven biocompatibility, there are several requirements for the efficacy of the polymeric drug carriers after internalization, e.g., nanoparticle behavior, cellular uptake, the rate of degradation, and cellular localization. The introduction of γ‐butyrolactone units into the hydrophobic block enables the tuning of the abovementioned properties over a wide range. In this study, a relatively high content of γ‐butyrolactone units with a reasonable yield of ≈60% is achieved by anionic ring‐opening copolymerization using 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene as a very efficient catalyst in the nonpolar environment of toluene with an incorporated γ‐butyrolactone content of ≈30%. The content of γ‐butyrolactone units can be easily modulated according to the feed ratio of the monomers. This method enables control over the rate of degradation so that when the content of γ‐butyrolactone increases, the rate of degradation increases. These findings broaden the application possibilities of polyester‐polyether‐based nanoparticles for biomedical applications, such as drug delivery systems.     

β‐cyclodextrin‐capped palladium nanoparticle‐catalyzed ligand‐free Suzuki and Heck couplings in low‐melting β‐cyclodextrin/NMU mixtures

Low‐melting β‐cyclodextrin/N‐methylurea (NMU) mixture, an efficient catalytic system for ligand‐free Suzuki and Heck couplings in the presence of fresh native β‐CD‐capped Pd⁰ nanoparticles, has been successfully reported. This natural and convenient system can be performed in air and could afford the corresponding cross‐coupled products in good to excellent isolated yields after a simple workup under every low Pd loading (0.05 mol%). Remarkably, the catalytic system can be recycled and reused without loss of catalytic activity. Copyright © 2014 John Wiley & Sons, Ltd.     

Microwave‐assisted graft polymerization of ε‐caprolactone onto magnetite

The graft polymerization of ε‐caprolactone (ε‐CL) onto magnetite was carried out under microwave irradiation in the presence of tin(II) 2‐ethylhexanoate. The molar ratio of ε‐CL to tin(II) 2‐ethylhexanoate was 300, whereas the molar ratio of ε‐CL to magnetite was 5. The chemical structures of the obtained poly(ε‐caprolactone) coated magnetic nanoparticles were characterized by FTIR and XPS spectroscopy. These magnetic‐polymer hybrid nanostructures were further investigated by X‐ray diffraction and magnetization measurements. The morphology of the magnetic core‐shell nanostructures were determined by TEM. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5397–5404, 2009     

Reactions of Diazomethanes with 5‐Benzylidene‐3‐phenylrhodanine – A Computational Study

It has been shown previously that the reaction of diazomethane with 5‐benzylidene‐3‐phenylrhodanine ( 1 ) in THF at ?20° occurs at the exocyclic C?C bond via cyclopropanation to give 3a and methylation to yield 4 , respectively, whereas the corresponding reaction with phenyldiazomethane in toluene at 0° leads to the cyclopropane derivative 3b exclusively. Surprisingly, under similar conditions, no reaction was observed between 1 and diphenyldiazomethane, but the 2‐diphenylmethylidene derivative 5 was formed in boiling toluene. In the present study, these results have been rationalized by calculations at the DFT B3LYP/6‐31G(d) level using PCM solvent model. In the case of diazomethane, the formation of 3a occurs via initial Michael addition, whereas 4 is formed via [3+2] cycloaddition followed by N₂ elimination and H‐migration. The preferred pathway of the reaction of 1 with phenyldiazomethane is a [3+2] cycloaddition, subsequent N₂ elimination and ring closure of an intermediate zwitterion to give 3b . Finally, the calculations show that the energetically most favorable reaction of 1 with diphenyldiazomethane is the initial formation of diphenylcarbene, which adds to the S‐atom to give a thiocarbonyl ylide, followed by 1,3‐dipolar electrocyclization and S‐elimination.     

Magnetic nanoparticle γ‐Fe2O3‐immobilized 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene as a highly recyclable and efficient nanocatalyst for the synthesis of α′‐oxindole‐α‐hydroxyphosphonates

Magnetic nanoparticle γ‐Fe₂O₃‐immobilized 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene as a novel magnetic nanocatalyst was synthesized and characterized. The nanoparticle reagent catalyzed efficiently the synthesis of α′‐oxindole‐α‐hydroxyphosphonates from isatins and dimethyl phosphate under solvent‐free conditions at 60 °C. More importantly, the catalyst could be easily recovered by an external magnet and reused six times without significant loss of activity. Copyright © 2014 John Wiley & Sons, Ltd.     

[Co(g5‐Me5C5)(g3‐tBu2PPCH–CH3)] aus [Co(g5‐Me5C5)(g2‐C2H4)2] und tBu2P–P=P(Me)tBu2

Coordination Chemistry of P‐rich Phosphanes and Silylphosphanes. XVII [1] [Co(g⁵‐Me₅C₅)(g³‐^tBu₂PPCH–CH₃)] from [Co(g⁵‐Me₅C₅)(g²‐C₂H₄)₂] and ^tBu₂P–P=P(Me)^tBu₂ [Co(η⁵‐Me₅C₅)(η³‐^tBu₂PPCH–CH₃)] 1 is formed in the reaction of [Co(η⁵‐Me₅C₅)(η²‐C₂H₄)₂] 2 with ^tBu₂P–P 4 (generated from ^tBu₂P–P=P(Me)^tBu₂ 3 ) by elimination of one C₂H₄ ligand and coupling of the phosphinophosphinidene with the second one. The structure of 1 is proven by ³¹P, ¹³C, ¹H NMR spectra and the X‐ray structure analysis. Within the ligand ^tBu₂P¹P²C¹H–CH₃ in 1 , the angle P1–P2–C1 amounts to 90°. The Co, P1, P2, C1 atoms in 1 look like a „butterfly”︁. The reaction of 2 with a mixture of ^tBu₂P–P=P(Me)^tBu₂ 3 and ^tBu–C?P 5 yields [Co(η⁵‐Me₅C₅){η⁴‐(^tBuCP)₂}] 6 and 1 . While 6 is spontaneously formed, 1 appears only after complete consumption of 5 .     

Synthesis,structure and cytotoxicity of new 2‐[(3‐aminopropyl)dimethylsilyl]‐5‐furfural diethylacetals and 2‐[(3‐aminopropyl)dimethylsilyl]‐5‐phenylfurans

Novel 2‐[(3‐aminopropyl)dimethylsilyl]‐5‐furfural diethylacetals and 2‐[(3‐aminopropyl)di‐methylsilyl]‐5‐phenylfurans have been synthesized by a hydrosilylation reaction of aliphatic and heterocyclic N‐allylamines in the presence of the Speier's catalyst. The effects of the structure of the amine and nature of organic substituent at the furan ring on the cytotoxicity of the new compounds have been studied. Copyright © 2013 John Wiley & Sons, Ltd.     

A Study on the Reaction of 1-（3-Pyridyl）-2,2-di-substituted Ethylenes with 1-Benzyl-1,4-dihydronicotinamide

The reaction of a series of 1-（3-pyridyl）-2,2-di-substituted ethylenes with 1-benzyl-1,4-dihydronicotinamide （BNAH） in deaerated acetonitrile produces the corresponding 1-（3-pyridyl）-2,2-di-substituted ethanes in contrast to benzylidenemalononitrile （BM） which does not react with BNAH under the same conditions.     

Nano n‐propylsulfonated γ‐Al2O3: a new,efficient and reusable catalyst for synthesis of spiro[indoline‐3,4‐pyrazolo[3,4‐e][1,4]thiazepine]diones in aqueous media

Nano n‐propylsulfonated γ‐Al₂O₃ is easily prepared by the reaction of nano γ‐Al₂O₃ with 1,3‐propanesultone. This reagent can be used as an efficient catalyst for the synthesis of spiro [indoline‐3,4‐pyrazolo[3,4‐e][1,4]thiazepine]diones in aqueous media. This new method consistently has the advantages of excellent yields and short reaction times. Further, the catalyst can be reused and recovered several times. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis,characterization and antibacterial activity of 3‐(2‐methoxyphenyl)‐2‐sulfanylpropenoic acid and di‐isopropylammonium [3‐(2‐methoxyphenyl)‐2‐sulfanylpropenoato] triphenylstannate(IV). The crystal structure of [HQ][SnPh3(o‐mpspa)]

Reaction of 3‐(2‐methoxyphenyl)‐2‐sulfanylpropenoic acid [H₂(o‐mpspa)] with SnPh₃OH in the presence of di‐isopropylamine resulted in the formation of the complex [HQ][SnPh₃(o‐mpspa)] (where HQ = di‐isopropylammonium cation and o‐mpspa = 3‐(2‐methoxyphenyl)‐2‐sulfanylpropenoato), which was characterized by mass spectrometry and vibrational spectroscopy, as well as by ¹H, ¹³C and ¹¹⁹Sn NMR spectroscopy. The single‐crystal X‐ray structural analysis of the new complex shows a trigonal‐bipyramidal coordination geometry around the Sn atom where o‐mpspa behaves as a bidentate chelating ligand. Dimeric units arise from the existence of N? H…O hydrogen bonds between the NH₂ group of the di‐isopropylammonium cation and the oxygen atoms of the two neighbouring carboxylato groups. The bacteriostatic activity of the complex is also reported. Copyright © 2007 John Wiley & Sons, Ltd.     

Engineering of UV‐absorbing polypropylene films containing poly(2‐(2′‐hydroxy‐5′‐methacryloxyethylphenyl)‐2H‐benzotriazole) nanoparticles

Ultraviolet‐absorbing nanoparticles (NPs) were prepared by emulsion co‐polymerization of the vinylic monomer 2‐(2′‐hydroxy‐5′‐methacryloxyethylphenyl)‐2H‐benzotriazole (Norbloc?, NB) with the crosslinking monomer divinylbenzene. The effect of total monomer, surfactant, crosslinker, and initiator concentrations on the size and size distribution of the formed NPs was elucidated. The NB monomer and the formed polyNB (PNB) NPs of 19 ± 2 nm were then incorporated into polypropylene (PP) films by melt‐compounding technique by using cast film extrusion. Increasing the PNB NP concentrations integrated within the PP films decreased their UV transmittance. Migration of the UV absorbing PNB NPs from the PP films was not observed during 3 years of storage at room temperature or while exposure to extreme conditions. Under the same conditions, a significant migration was observed for the NB monomer‐containing films. Overall, the PNB NP‐containing films are clear and transparent, although the haze was affected by the addition of NB and PNB NPs. Moreover, the films have good mechanical properties and UV‐blocking quality. Copyright © 2017 John Wiley & Sons, Ltd.     

A rapid and sensitive LC–MS/MS method for quantification of quercetin‐3‐O‐β‐d‐glucopyranosyl‐7‐O‐β‐d‐gentiobioside in plasma and its application to a pharmacokinetic study

A rapid and sensitive LC–MS/MS method with good accuracy and precision was developed and validated for the pharmacokinetic study of quercetin‐3‐O‐β‐d ‐glucopyranosyl‐7‐O‐β‐d ‐gentiobioside (QGG) in Sprague–Dawley rats. Plasma samples were simply precipitated by methanol and then analyzed by LC–MS/MS. A Venusil® ASB C₁₈ column (2.1 × 50 mm, i.d. 5 μm) was used for separation, with methanol–water (50:50, v/v) as the mobile phase at a flow rate of 300 μL/min. The optimized mass transition ion‐pairs (m/z) for quantitation were 787.3/301.3 for QGG, and 725.3/293.3 for internal standard. The linear range was 7.32–1830 ng/mL with an average correlation coefficient of 0.9992, and the limit of quantification was 7.32 ng/mL. The intra‐ and inter‐day precision and accuracy were less than ±15%. At low, medium and high quality control concentrations, the recovery and matrix effect of the analyte and IS were in the range of 89.06–92.43 and 88.58–97.62%, respectively. The method was applied for the pharmacokinetic study of QGG in Sprague–Dawley rats. Copyright © 2016 John Wiley & Sons, Ltd.     

CuI/amino acid‐catalyzed coupling and cyclization of β‐bromo‐α,β‐unsaturated amides with terminal alkynes leading to (3Z)‐3‐alkylidenepyrrol‐1‐ones

β‐Bromo‐α,β‐unsaturated amides are coupled and cyclized with terminal alkynes in DMF at 110 °C in the presence of a catalytic amount of CuI and amino acid along with a base to give the corresponding (3Z)‐3‐alkylidenepyrrol‐1‐ones in moderate to good yields. Copyright © 2013 John Wiley & Sons, Ltd.