Energy transfer from fluorene‐based conjugated polyelectrolytes to on‐chain and self‐assembled porphyrin units

A new water soluble fluorene‐based polyelectrolyte containing on‐chain porphyrin units has been synthesized via Suzuki coupling, for use in optoelectronic devices. The material consist of a random copolymer of poly{1,4‐phenylene‐[9,9‐bis(4‐phenoxy butylsulfonate)]fluorene‐2,7‐diyl} (PBS‐PFP) and a 5,15‐diphenylporphyrin (DPP). The energy transfer process between the PBS‐PFP units and the porphyrin has been investigated through steady state and time‐resolved measurements. The copolymer PBS‐PFP‐DPP displays two different emissions one located in the blue region of the spectra, corresponding to the fluorene part and another in the red due to fluorescent DPP units either formed directly or by exciton transfer. However, relatively inefficient energy transfer from the PFP to the on‐chain porphyrin units was observed. We compare this with a system involving an anionic blue light‐emitting donor PBS‐PFP and a anionic red light‐emitting energy acceptor meso‐tetrakisphenylporphyrinsulfonate (TPPS), self‐assembled by electrostatic attraction induced by Ca²⁺. Based on previous studies related to chain aggregation of the anionic copolymer PBS‐PFP, two different solvent media were chosen to further explore the possibilities of the self‐assembled system: dioxane–water and aqueous nonionic surfactant n‐dodecylpentaoxyethylene glycol ether (C₁₂E₅). In contrast, with the on‐chain PBS‐PFP‐DPP system the strong overlap of the 0‐0 emission peak of the PBS‐PFP and the Soret absorption band of the TPPS results in an efficient Förster transfer. This is strongly dependent on the solvent medium used. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Energy transfer through heterogeneous dyes‐substituted fluorene‐containing alternating copolymers and their dual‐emission properties in the films

We report synthesis of the modified fluorene polymers tethered to the heterogeneous types of the fluorescent dyes at the cardo carbon for obtaining the dual‐emissive solid materials. A series of the alternating fluorene copolymers modified with pyrene or 9,10‐diphenylanthracene and BODIPY at the cardo carbon based on the red‐emissive donor–acceptor structure were prepared, and their characteristics were examined. From the measurements of the optical properties, the energy transfer efficiencies were evaluated. In summary, variable energy transfer efficiencies were observed between the side chains and from the side chain to the main chain. It was indicated that the energy transfer efficiencies were strongly depended on the types of the energy donor and the detection conditions as such in the solution or film. Furthermore, it was found that the cardo fluorene units can contribute to the suppression of the energy transfer in the condensed state. Finally, the dual‐emissive polymers were obtained in the film states. This is the first example, to the best of our knowledge, not only to offer systematic information on the energy transfer between the dye molecules and the polymer main‐chains via the cardo structure but also to demonstrate the polymer‐based optical materials with the dual‐emission properties. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2026–2035     

Synthesis,characterization, and large two‐photon absorption cross‐sections of solid red‐emitting 1,4‐diketo‐3,6‐diphenylpyrrolo [3,4‐c]pyrrole/3,6‐carbazole/terfluorene copolymers

The synthesis, one‐ and two‐photon absorption (TPA) and emission properties of three novel 1,4‐diketo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (DPP)/3,6‐carbazole (Cz)/terfluorene (TF) copolymers are reported. The molar ratios of DPP versus TF are 15:85 ( TCP15 ), 25:75 ( TCP25 ), and 50:50 ( TCP50 ) under Cz:(TF + DPP) = 1. Two distinguished one‐photon absorption and emission bands observed in solutions imply that the electronic states of Cz–DPP–Cz and Cz–TF–Cz are not well mixed and the energy transfer from TF segments to DPP units is incomplete. However, in film states, all three copolymers are monochromatic red emitting with the peak wavelengths at 617, 621, and 631 nm for TCP15 , TCP25 , and TCP50 , respectively, indicating that the interchain interactions also have played an important role in the energy transfer. In two‐photon measurement, the copolymer solutions still exhibit two distinguished emission bands but the relative intensities at short‐wavelength region are obviously decreased, implying that Cz–TF–Cz segment is high one‐photon active but low TPA active, whereas Cz–DPP–Cz unit is low one‐photon active but high TPA active. All the copolymers show large δ over the range of measured wavelengths and the δ values of TCP15 , TCP25 , and TCP50 increase with DPP contents and are up to 530, 770, and 850 GM per repeating unit, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Combinatorial Energy Transfer between an End‐Capped Conjugated Polyelectrolyte and Chromophore‐Labeled PNA for Strand‐Specific DNA Detection

We report a macromolecular end‐capping approach to improve the detection sensitivity of cationic conjugated polymer (CCP) based DNA detection. A phenylethynyl anthracene (PEA) end‐capped cationic polyfluorene (PF) derivative ( P1 ) is synthesized via Suzuki coupling. Due to efficient fluorescence resonance energy transfer (FRET) from the polymer backbone to the end‐capper PEA units, the polymer ( P1 ) fluorescence is dominated by the emission from PEA even in dilute aqueous solution. P1 emission has a better spectral overlap with fluorescein (Fl) absorption compared to that for uncapped PF ( P2 ). In addition, the intra and intermolecular energy transfer for P1 is more efficient in the presence of DNA due to complexation‐induced polymer aggregation. These impart a combinatorial FRET between P1 and an Fl‐labeled probe which is more efficient than that between P2 and the same probe. P1 thus offers a better DNA detection sensitivity relative to P2 and opens up new opportunities to improve the performance of CCP based biosensors involving FRET.

     

New moderate bandgap polymers containing alkoxysubstituted‐benzo[c][1,2,5]thiadiazole and thiophene‐based units

Alkoxysubstituted benzo[c][1,2,5]thiadiazole electron accepting units were prepared and copolymerized with various thiophene‐based electron donating monomers to produce new low bandgap polymers P1–4 . The materials showed broad absorption in the range from 300 to 700 nm with bandgaps below 2 eV in solution. Efficiencies of over 1% were obtained from photovoltaic cells using P4 with PCBM as acceptor. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Luminescent copolymers for applications in multicolor‐light‐emitting devices

Light‐emitting diodes based on organic materials [organic light‐emitting diodes (OLEDs)] have attracted much interest over the past decade. Several different attempts have been made to realize multicolor OLEDs. This article describes a new approach based on energy transfer in a donor/acceptor system. A copolymer containing both donor and acceptor compounds as comonomer units is prepared. The polymer consists of a derivative of a luminescent dye [4‐dicyanmethylene‐2‐methyl‐6‐4H‐pyran (DCM); acceptor compound], which is copolymerized with fluorene (donor compound) to combine the properties of an electroactive polymer with a highly luminescent dye. Photochemical processing is achieved by UV irradiation of this copolymer in the presence of gaseous trialkylsilanes. This reagent selectively saturates the C?C bonds in the DCM comonomer units while leaving the fluorene units essentially unaffected. As a result of the photochemical process, the red electroluminescence of the acceptor compound vanishes, and the blue‐green electroluminescence from the polyfluorene units is recovered. Compared with previous approaches based on polymer blends, this copolymer approach avoids problems associated with phase‐separation phenomena in the active layer of OLEDs. © 2006Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4317–4327, 2006     

Synthesis,optical and electrochemical properties of arylenevinylene‐based π‐conjugated polymers with imidazolium units in the main chain

Arylenevinylene‐based π‐conjugated polymers containing imidazolium cationic units in the main chain and their model compounds were synthesized and characterized in terms of optical and electrochemical properties. 9,9‐Bisoctylfluorene, 2,5‐bisdodecyloxybenzene, and 3‐dodecylthiophene were introduced as arylene units with different donor characteristics to evaluate the effect on the highest occupied molecular orbital‐lowest unoccupied molecular orbital (HOMO‐LUMO) gap energy. The UV–vis and fluorescence spectra of cationic polymers and model compounds with iodide counter anion exhibited a significant blue shift with respect to the parent neutral molecules. X‐ray single crystal analysis for model compounds revealed that the effective π‐conjugation length of cationic model compounds decreased compared to the neutral model compounds by means of twisted conformation directed by CH‐π interactions between N‐methyl groups of imidazolium and neighboring aryl units. The cyclic voltammetry measurement suggested the negative shift of LUMO levels by the conversion of imidazole to imidazolium, indicating the electron‐accepting characteristics of cationic imidazolium unit. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Cationic and Anionic Conjugated Polyelectrolytes: Aggregation‐Mediated Fluorescence Energy Transfer to Dye‐Labeled DNA

An electrostatic complex of water‐soluble conjugated polyelectrolytes (CPs) between anionic poly(9,9‐bis(4′‐sulfonatobutyl)fluorene‐co‐alt‐1,4‐phenylene) disodium salt (a‐PFP) and cationic poly(9,9‐bis((6′‐N,N,N,‐trimethylammonium)hexyl)fluorene‐co‐2,1,3‐bezothiadiazole) dibromide (85:15) (c‐PFB₁₅) was tested as a fluorescence resonance energy transfer (FRET) donor to Texas Red (TR)‐labeled single‐stranded DNA (ssDNA‐TR) via two‐step FRET processes. Electrostatic complexation of a‐PFP and c‐PFB₁₅ in water leads to aggregation of polymer chains, a concomitant reduction of intersegment distances, and energy transfer to the benzothiadiazole (BT) segments. The following complexation with ssDNA‐TR leads to energy transfer from BT to TR via two‐step FRET processes. This detection schematic shows an FRET‐induced signal amplification, which can be achieved by adjusting the charge ratio in the cationic/anionic CP complex and controlling the number density of the binding CPs around the acceptor, resulting in enhanced antenna effects and sensitivity in CP‐based FRET DNA detection assays.

     

Synthesis of cationic diacetylene‐co‐carbazole‐co‐fluorene polymers and their sensitive fluorescent quenching properties with DNA

Two neutral precursor conjugated copolymers based 2,7‐diethynylfluorene and 3,6‐diethynylcarbazole units in the main chain ( PFC and PF2C ) were prepared by Hay coupling polymerization. Their cationic copolymers ( CPFC and CPF2C ) were prepared by the methylation of their diethylpropylamino groups with CH₃I. For comparison, neutral conjugated homopolymers of 2,7‐diethynylfluorene ( PF ), 3,6‐diethynylcarbazole units ( PC ) and their cationic polymers ( CPF and CPC ) were also prepared with the same method. A comparative study on the optical properties of cationic polymers CPFC and CPF2C in DMF and DMF/H₂O showed that they underwent water‐induced aggregation. The spectral behaviors of CPFC and CPF2C with calf thymus DNA showed that a distinct fluorescent quenching took place with minute addition of CT DNA (3.3 × 10^?13 M). The results showed that the polymers would be promising biosensor materials for sensitive detection of DNA. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4168–4177, 2010     

Introducing a new triazoloquinoxaline‐based fluorene copolymer for organic photovoltaics: Synthesis,characterization, and photovoltaic properties

A new donor‐acceptor copolymer consisting of triazoloquinoxaline and 9,9‐dialkylfluorene units on the main chain has been synthesized, characterized and evaluated as donor material in bulk heterojunction solar cells using PC₆₁BM as an acceptor. The resulting polymer PTQF showed good thermal stability and solubility in common organic solvents. Cyclic Voltammetry measurements showed that the PTQF has HOMO–LUMO energy levels of ?5.13 and ?3.62 eV, respectively. DFT calculations revealed that the HOMO is delocalized all over the thiophene and fluorene units and the LUMO is localized mainly on the triazole and pyrazine units. PTQF absorbs broadly in the visible region and exhibits a bandgap of 1.4 eV. Photovoltaic devices exhibited 1.7% efficiency for 1:2 PTQF:PC₆₁BM blend ratio using Ca/Ag electrodes. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

New environmentally responsive fluorescent N‐isopropylacrylamide copolymer and its application to DNA sensing

We report two novel multifunctional copolymers consisting of a temperature‐responsive poly(N‐isopropylacrylamide) (PNIPAA) segment and a fluorescent fluorene‐containing acrylic polymer segment with pH responsiveness and/or DNA‐sensing ability. The functional acrylic monomer with a fluorene dimer side group substituted with amino units was synthesized first. Then, it was copolymerized with N‐isopropylacrylamide to result in a new water‐soluble, fluorescent PNIPAA copolymer ( P1 ). The fluorescent properties of P1 under neutral and acidic conditions did not change with the temperature. However, significant variation was observed under basic conditions. The protonation of the amino moiety at a low pH improved the solubility and prevented aggregation for fluorescence quenching, but not under the basic conditions. Although aggregation of the fluorene units was significant at room temperature under basic conditions, the aggregation was resolved at a temperature above the lower critical solution temperature. These findings indicated the pH‐ and temperature‐responsive characteristics of P1 . Moreover, after the amino groups were quaternized, the obtained polymer could be used as a biosensor because the fluorescence intensity was quenched with the addition of DNA. This study demonstrates that multifunctional materials with pH‐ and temperature‐sensing characteristics and biological molecules could be realized by the incorporation of a functional fluorene‐containing moiety with PNIPAA. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5495–5504, 2006     

Water‐soluble anionic conjugated polymers for metal ion sensing: Effect of interchain aggregation

Three sulfonato‐containing fluorene‐based anionic water‐soluble conjugated polymers, which are specially designed to link fluorene with alternating moieties such as bipyridine ( P1 ), pyridine ( P2 ), and benzene ( P3 ) have been synthesized via the Pd‐catalyzed Sonogashira‐coupling reaction, respectively. These polymers had good solubility in water and showed different responses for transition metal ions with different valence in aqueous environments: the fluorescence of bipyridine‐containing P1 can be completely quenched by addition of all transition metal ions selected and showed a good selectivity for Ni²⁺; the pyridine‐containing P2 had a little response for monovalent and divalent metal ions while showed good quenching with the addition of trivalent metal ions (with a special selectivity for Fe³⁺); P3 had responses only for the trivalent metal ions within the ionic concentration we studied. After investigation of the UV‐vis absorption spectra, PL emission spectra, DLS, and fluorescence lifetime of P1 – P3 in aqueous solution when adding transition metal ions, we found that the different spectrum responses of these polymers are attributed to the different coordination ability of the units linked with fluorene in the main chain. The energy or electron‐transfer reactions were the main reason for fluorescence quenching of P1 and P2 . On the other hand, interchain aggregation caused by trivalent metal ions lead to fluorescence quenching for P3 and also caused partly fluorescence quenching of P1 and P2 . These results revealed the origin of ionochromic effects of these polymers and suggested the potential application for these polymers as novel chemosensors with higher sensing sensitivity in aqueous environments. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5057–5067, 2009     

Band gap tuning of narrow‐polydispersity two‐dimensional conductive polymers with electroactive side‐chains

A series of two‐dimensional donor–acceptor–donor (D1–A(D2)) type of conducting polymers (CPs) all with electroactive bulky side chain structure has been designed, synthesized, and investigated by introducing the donor–acceptor (D1–A) thiophene–quinoxaline moiety in the main chain alongside and additional donor and hole transporting units in the side chain. All the UV‐vis spectra of the 2D polymers, PTPQT, PFPQT, and PCPQT, each with triphenylamine, fluorene, and carbazole units as the D2 side chain, possess strong intramolecular charge transfer absorption, thus resulting in better light harvesting. Their optical and electronic properties were thoroughly explored experimentally and computationally. The effect of molecular weight of the narrow polydispersity polymers on their optoelectronic property was studied in detail. In summary, the 2‐D CPs show potential for use as an active material in optoelectronic devices. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1217–1227     

Direct arylation polymerization toward ultra‐low bandgap poly(thienoisoindigo‐alt‐diketopyrrolepyrrole) conjugated polymers: The effect of β‐protection on the polymerization and properties of the polymers

Direct arylation polymerization between derivatives of dibromodiketopyrrolopyrrole (DPP) and thienoisoindigo (TIIG) resulted in two π‐conjugated copolymers with average molecular weights up to 24.0 kDa and bandgaps as low as 0.8 eV. The structural analysis of the obtained two polymers revealed well‐defined alternating conjugation backbones without obvious structural defects. The introduction of hexyl‐group in the β‐position of thiophene rings in the DPP units not only reduces the bandgap of conjugated polymer compared to a similar polymer containing bare‐thiophene flanked DPP but also affects polymer morphology in thin films. P‐type charge‐transport characteristics were observed for two polymers in organic field‐effect transistors with comparable hole mobilities. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3205–3213     

Exploring the influence of acceptor content on semi‐random conjugated polymers

A family of diketopyrrolopyrrole (DPP)‐incorporated P3HT based semi‐random copolymers was synthesized and their optical, electronic and photovoltaic properties were investigated. For the first time, the influence of acceptor content on semi‐random copolymers was explored in the broad range of 10–40% acceptor. A mixture of DPP acceptor units with different side chains (ethylhexyl and decyltetradecyl) was incorporated into each copolymer to improve solubility and film quality. Increased DPP content in the polymer backbone resulted in broadened absorption between 350 and 900 nm, resulting in a monotonic decrease in optical band gap (E_g) of the polymers from 1.49 to 1.37 eV. Highest occupied molecular orbital (HOMO) energy levels showed an increase from 10% DPP to 20–30% DPP, while decreasing for 40% DPP. V_oc values followed a consistent trend with HOMO energy levels. Semi‐random copolymers showed significantly improved photovoltaic properties compared with P3HT. Bulk heterojunction solar cells fabricated from the semi‐random copolymers blended with PC₆₁BM exhibited high short‐circuit current densities (J_sc) up to 10.29 mA/cm² and efficiencies up to 4.43%. A new method of methanol treatment was developed and applied to the semi‐random copolymers resulting in high fill factors approaching 0.70 under ambient conditions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3884–3892     

Random copolymers based on 3‐hexylthiophene and benzothiadiazole with induced π‐conjugation length and enhanced open‐circuit voltage property for organic photovoltaics

A series of donor‐acceptor low‐bandgap conjugated polymers, that is, HThmBT (m = 3, 6, 9, 12, 15), composed of regioregular 3‐hexylthiophene segments and 2,1,3‐benzothiadiazole units, were synthesized through the Stille coupling polymerization to optimize the π‐conjugation length of the polymer and the intramolecular charge transfer (ICT) effect in the polymer backbone. The polymers had relatively low optical bandgaps ranging from 1.6 to 1.72 eV. Among these polymers, HTh6BT exhibited the best device performance with a power conversion efficiency (PCE) of 1.6%. Moreover, despite being based on thiophene, HTh6BT exhibited a high‐open circuit voltage (V_OC) of over 0.8 V because of its low high occupied molecular orbital (HOMO) energy level. These results provided an effective strategy for designing and synthesizing low‐bandgap conjugated polymers with broad absorption ranges and well‐balanced energy levels. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Triphenylamine‐based fluorescent conjugated copolymers with pendant terpyridyl ligands as chemosensors for metal ions

Two well‐defined triphenylamine‐based fluorescent conjugated copolymers with pendant terpyridyl ligands were synthesized through Suzuki coupling polymerization and were further characterized by ¹H‐NMR, ¹³C‐NMR, gel permeation chromatography, Infrared, and UV‐vis spectra. Polymer P‐1 , terpyridine‐bearing poly(triphenylamine‐alt‐fluorene) with a high fluorescence quantum yield (62%) shows much higher sensitivities toward Fe³⁺, Ni²⁺, and Cu²⁺ as compared with the other metal ions investigated. Especially, Fe³⁺ can lead to an almost complete fluorescence quenching of polymer P‐1 . Whereas, the analogous polymer P‐2 , in which N‐ethylcarbazole repeat units replace the fluorene units in P‐1 , shows a very poor selectivity. It demonstrates that polymers with a same receptor may show different sensitivity to analytes owing to their different type of backbones. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1310–1316, 2010     

Synthesis and characterization of fluorene and cyclopentadithiophene‐based copolymers exhibiting broad absorption for photovoltaic devices

In this study, two low bandgap copolymers composed of fluorene (Fl), cyclopentadithiophene (CDT), and 4,7‐bis(2‐thienyl)‐2,1,3‐benzothiadiazole (DBT) were synthesized, and their optical, electrochemical, and photovoltaic (PV) characteristics were investigated for applications in PV devices. The feed ratio of the Fl and CDT moieties was modulated to tune the electronic structures and resulting optical properties of the polymers. In the copolymeric structures, the Fl‐CDT unit absorbs the short‐wavelength UV/vis regions, and the CDT‐DBT (or Fl‐DBT) unit with strong intramolecular charge transfer characteristics covers the long‐wavelength visible regions. P1 exhibited a wide UV absorption spectrum covering the UV and entire visible region in the range of 300–800 nm, and P2 showed absorption covering from 300 to 700 nm. UV/vis and electrochemical studies confirmed the desirable highest occupied molecular orbital/lowest unoccupied molecular orbital levels of the copolymers with bandgaps of 1.62–1.86 eV, enabling efficient electron transfer and a high open‐circuit voltage when blending them with fullerene derivatives. When the polymers were blended with [6,6]phenyl‐C₆₁‐butyric acid methyl ester, P1 exhibited the best device performance with an open‐circuit voltage of 0.66 V, short‐circuit current of 4.92 mA cm^?2, and power conversion efficiency of 1.13% under Air Mass 1.5 Global (AM 1.5G, 100 mW cm^?2) illumination. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Low‐bandgap donor–acceptor copolymers with 4,6‐bis(3′‐(2‐ethylhexyl)thien‐2′‐yl)thieno[3,4‐c][1,2,5]thiadiazole: synthesis,optical, electrochemical,and photovoltaic properties

Two new low‐bandgap alternating copolymers (CEHTF and CEHTP) consisting of 4,6‐bis(3′‐(2‐ethylhexyl)thien‐2′‐yl)thieno[3,4‐c][1,2,5] thiadiazole and 9,9‐bis(2‐ethylhexyl)fluorene or 2,5‐bis(isopentyloxy)benzene were synthesized by Suzuki coupling reaction of corresponding comonomers. Their optical, electrochemical, and photovoltaic (PV) properties were studied and are reported. Both the copolymers exhibited long‐wavelength absorption covering the whole visible spectral region, which is in CEHTP thin films extended up to near infrared region, ambipolar redox properties, and electrochromism. High‐electron affinities and low‐optical bandgap values, 1.37 and 1.15 eV, were determined for CEHTF and CEHTP, respectively. PV devices with bulk heterojunction made of blends of copolymers and fullerene derivative [6,6]‐phenyl‐C⁶¹‐butyric acid methyl ester ([60]PCBM) were prepared and characterized. Effects of intramolecular charge transfer strength and side‐chain nature and length on photophysical properties are discussed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Arylamino‐functionalized fluorene‐ and carbazole‐based copolymers: Color‐tuning their CdTe nanocrystal composites from red to white

Four alternating arylamino‐functionalized copolymers were synthesized in a Suzuki copolymerization applying 4, 4′‐(2,7‐dibromo‐9H‐fluorene‐9,9‐diyl)dianiline, 4,4′‐(2,7‐dibromo‐9H‐fluorene‐9,9‐diyl)bis(N,N‐diphenylaniline), 4‐(3,6‐dibromo‐9H‐ carbazol‐9‐yl)aniline and 4‐(3,6‐dibromo‐9H‐carbazol‐9‐yl)‐N,N‐diphenylaniline in combination with 2,2′‐(9,9‐dioctyl‐9H‐fluorene‐2,7‐diyl)bis(1,3,2‐dioxaborinane). The resulting novel alternating copolymers were fully characterized. The copolymers revealed blue light emission and wide optical bandgaps of at least 2.93 eV for the fluorene‐based and 3.07 eV for the carbazole‐based polymers. The amino‐functions allow to tie semiconducting CdTe nanocrystals (NCs) and to synthesize a series of composites with CdTe NCs. Moreover, tuning the emission color over a wide range by tying these CdTe NCs results in a facile preparation of organic–inorganic semiconductor composites with emission colors “à la carte.” © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011