Theoretical study of the adsorption of ethylene on alkali‐exchanged zeolites

The structures of alkali‐exchanged faujasite (X–FAU, X = Li⁺ or Na⁺ ion) and ZSM‐5 (Li–ZSM‐5) zeolites and their interactions with ethylene have been investigated by means of quantum cluster and embedded cluster approaches at the B3LYP/6‐31G(d, p) level of theory. Inclusion of the Madelung potential from the zeolite framework has a significant effect on the structure and interaction energies of the adsorption complexes and leads to differentiation of different types of zeolites (ZSM‐5 and FAU) that cannot be drawn from a typical quantum cluster model, H₃SiO(X)Al(OH)₂OSiH₃. The Li–ZSM‐5 zeolite is predicted to have a higher Lewis acidity and thus higher ethylene adsorption energy than the Li–FAU zeolites (16.4 vs. 14.4 kcal/mol), in good agreement with the known acidity trend of these two zeolites. On the other hand, the cluster models give virtually the same adsorption energies for both zeolite complexes (8.9 vs. 9.1 kcal/mol). For the larger cation‐exchanged Na–FAU complex, the adsorption energy (11.6 kcal/mol) is predicted to be lower than that of Li–FAU zeolites, which compares well with the experimental estimate of about 9.6 kcal/mol for ethylene adsorption on a less acidic Na–X zeolite. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 333–340, 2003     

Framework Stability and Brønsted Acidity of Isomorphously Substituted Interlayer‐Expanded Zeolite COE‐4: A Density Functional Theory Study

COE‐4 zeolites possess a unique two‐dimensional ten‐ring pore structure with the Si(OH)₂ hydroxyl groups attached to the linker position between the ferrierite‐type layers, which has been demonstrated through the interlayer‐expansion approach in our previous work (H. Gies et al. Chem. Mater.­ 2012 , 24, 1536). Herein, density functional theory is used to study the framework stability and Brønsted acidity of the zeolite T‐COE‐4, in which the tetravalent Si is isomorphously substituted by a trivalent Fe, B, Ga, or Al heteroatom at the linker position. The influences of substitution energy and equilibrium geometry parameters on the stability of T‐COE‐4 are investigated in detail. The relative acid strength of the linker position is revealed by the proton affinity, charge analysis, and NH₃ adsorption. It is found that the range of the 〈T‐O‐Si〉 angles is widened to maintain the stability of isomorphously substituted T‐COE‐4 zeolites. The smaller the 〈O1‐T‐O2〉 bond angle is, the more difficult is to form the regular tetrahedral unit. Thus, the substitution energies at the linker positions increase in the following sequence: Al‐COE‐4 < Ga‐COE‐4 < Fe‐COE‐4 < B‐COE‐4. The adsorption of NH₃ as a probe molecule indicates that the acidity can affect the hydrogen‐bonding interaction between (N?H???O2) and (N???H?O2). The relative Brønsted‐acid strength of the interlayer‐expanded T‐COE‐4 zeolite decreases in the order of Al‐COE‐4 > Ga‐COE‐4 > Fe‐COE‐4 > B‐COE‐4. These findings may be helpful for the structural design and functional modification of interlayer‐expanded zeolites.     

Application of QM simulations and multivariate analysis in the study of alkene reactivity in the zeolite H‐ZSM5

Reported herein are the results of an investigation into the effect of the extended framework of the zeolite ZSM‐5 on the reaction energetics and structures of (a) the physisorbed complex formed between the zeolite and six alkenes, (b) the corresponding chemisorbed alkoxide intermediate and (c) the transition states (TS) connecting the two. For this, quantum mechanical (QM) simulations of ZSM‐5 in the presence and absence of the zeolite framework have been employed. A 46T density functional theory (DFT) cluster model and a 3T:46T DFT:UFF ONIOM model are used to represent the former scenario and a simple 3T DFT cluster model for the latter. The structural implications of neglecting the zeolite framework have been rigorously compared using the multivariate statistical method principal components analysis (PCA). This method allows one to assess the correlated nature of the changes in structure along the reaction coordinate, for multiple different alkenes, in a facile, reliable way. Copyright © 2008 John Wiley & Sons, Ltd.     

Ga/HZSM-5分子筛上乙烯二聚反应的理论研究

应用理论计算方法研究了Ga/HZSM-5及Al/HZSM-5 分子筛上乙烯二聚生成1-丁烯的反应历程, 比较了分子筛酸性对反应能量的影响. 计算采用分为两层的76T簇模型, 应用量子力学和分子力学联合的 ONIOM2 (B3LYP/6-31G(d, p):UFF) 方法. 乙烯二聚过程可按照分步机理和协同机理进行, 均得到表面丁基烷氧中间产物. 计算结果表明, 与在Al/HZSM-5分子筛上的反应过程相比, 乙烯在 Ga/HZSM-5分子筛上的吸附能低 20.62 kJ·mol^-1, 但质子化反应的活化能只高出1.26 kJ·mol^-1; 而乙基烷氧中间体与乙烯分子结合过程的活化能高出 62.55 kJ·mol^-1, 原因是Ga 原子半径大, 降低了六元环过渡态的稳定性. 若按协同机理, 质子转移和C―C键聚合同时进行, 在 Ga/HZSM-5分子筛上的活化能较Al/HZSM-5的高16.44 kJ·mol^-1. 因此乙烯二聚按照协同机理有利. 研究还表明, 表面丁基烷氧中间体脱质子, 生成1-丁烯并吸附在复原的分子筛酸性位上. 该反应在两种酸中心上的活化能几乎相同, 但明显高于其他各步的活化能, 因此成为整个反应的速度控制步骤.     

Acidic properties of [Al], [Ga] and [Fe] isomorphously substituted zeolites. Density functional model cluster study of the complexes with a probe CO molecule

The Brønsted acid strength and related characteristics of bridging hydroxyl groups in [Al]-, [Ga]- and [Fe]-framework-substituted zeolites have been studied using a model cluster density functional approach based on a gradient-corrected exchange-correlation energy functional. The acidity is found to decrease in the order Al(OH)Si > Ga(OH)Si > Fe(OH)Si in agreement with existing experimental and theoretical results. The present quantification is based on the calculated deprotonation energy of H₃Si(OH)TH₃, on the adsorption energy of a CO probe molecule as well as on the changes of the vibrational frequencies and absolute IR intensities of the O---H and of the C---O modes induced by CO adsorption. The vibrational parameters of the carbonyl adsorption complex in [Fe]-zeolites are predicted.     

异丁烯在不同硅铝比的NanZSM-5型分子筛中的吸附：分子模拟研究

Frameworks of NanZSM-5 type zeolites with various Si/A1 ratios have been constructed and optimized with molecular dynamic quench simulation. The results show that the structure parameters of NanZSM-5 type zeolite, including the bond length and atomic charges, are consistent with those predicted by ab initio cluster calculations. It was also observed that atomic charges of Si atoms were shifted to higher field in NanZSM-5 type zeolite with lower Si/Al ratio. Then, the adsorption of isobutene on NanZSM-5 with various Si/Al ratios has been investigated using grand canonical ensemble Monte Carlo simulation and Cvff-300-1.01 forcefield. The simulated adsorption amount was in good agreement with the experimental data. Based on these facts, the effects of Si/Al ratio on the adsorption amount and adsorption isotherms of isobutene on NanZSM-5 were predicted. The results indicated that Si/Al ratio was important for the adsorption of isobutene and the adsorption amount was decreased as the Si/Al ratio was increased, which can be explained that the atomic charge of Na^＋ cation would influence greatly the π electrons of the isobutene double bond due to the Coulomb force. In addition, the adsorption sites of isobutene and interaction energy of isobutene with NanZSM-5 were also discussed.     

Direct Imaging of Atomically Dispersed Molybdenum that Enables Location of Aluminum in the Framework of Zeolite ZSM‐5

Integrated differential phase‐contrast scanning transmission electron microscopy (iDPC‐STEM) is capable of directly probing guest molecules in zeolites, owing to its sufficient and interpretable image contrast for both heavy and light elements under low‐dose conditions. This unique ability is demonstrated by imaging volatile organic compounds adsorbed in zeolite Silicalite‐1; iDPC‐STEM was then used to investigate molybdenum supported on various zeolites including Silicalite‐1, ZSM‐5, and mordenite. Isolated single‐Mo clusters were observed in the micropores of ZSM‐5, demonstrating the crucial role of framework Al in driving Mo atomically dispersed into the micropores. Importantly, the specific one‐to‐one Mo‐Al interaction makes it possible to locate Al atoms, that is, catalytic active sites, in the ZSM‐5 framework from the images, according to the positions of Mo atoms in the micropores.     

Gamma‐Ray Irradiation to Accelerate Crystallization of Mesoporous Zeolites

Gamma‐ray (γ‐ray) irradiation was introduced into zeolite synthesis. The crystallization process of zeolite NaA, NaY, Silicalite‐1, and ZSM‐5 were greatly accelerated. The crystallization time of NaA zeolite was significantly decreased to 18 h under γ‐ray irradiation at 20 °C, while more than 102 h was needed for the conventional process. Unexpectedly, more mesopores were created during this process, and thus the adsorption capacity of CO₂ increased by 6‐fold compared to the NaA prepared without γ‐ray irradiation. Solid experimental evidence and density function theory (DFT) calculations demonstrated that hydroxyl free radicals (OH*) generated by γ‐rays accelerated the crystallization of zeolite NaA. Besides NaA, mesoporous ZSM‐5 with MFI topology was also successfully synthesized under γ‐ray irradiation, which possessed excellent catalytic performance for methanol conversion, suggesting the universality of this new synthetic strategy for various zeolites.     

ZSM‐5 Zeolite Nanosheets with Improved Catalytic Activity Synthesized Using a New Class of Structure‐Directing Agents

A new series of multiquaternary ammonium structure‐directing agents, based on 1,4‐diazabicyclo[2.2.2]octane, was prepared. ZSM‐5 zeolites with nanosheet morphology (10 nm crystal thickness) were synthesized under hydrothermal conditions using multiquaternary ammonium surfactants as the zeolite structure‐generating agents. Both wide‐angle and small‐angle diffraction patterns were obtained using only a suitable structure‐directing agent under a specific zeolite synthesis composition. A mechanism of zeolite formation is proposed based on the results obtained from various physicochemical characterizations. ZSM‐5 materials were investigated in catalytic reactions requiring medium to strong acidity, which are important for the synthesis of a wide range of industrially important fine and specialty chemicals. The catalytic activity of ZSM‐5 materials was compared with that of the conventional ZSM‐5 and amorphous mesoporous aluminosilicate Al‐MCM‐41. The synthesis strategy of the present investigation using the new series of structure‐directing agents could be extended for the synthesis of other related zeolites or other porous materials in the future. Zeolite with a structural feature as small as the size of a unit cell (5–10 nm) with hierarchically ordered porous structure would be very promising for catalysis.     

A DFT study on Cu(I) coordination in Cu‐ZSM‐5: Effects of the functional choice and tuning of the ONIOM approach

The coordination of Cu⁺ at the T1 and T7 positions of the M7 ring of Cu‐ZSM‐5, and the interaction of NO with coordinated Cu⁺ were investigated by means of DFT/ONIOM calculations. The B3LYP, BLYP, PBE1PBE, PBE, M06, and M062X functionals with the def2‐TZVP (def2‐QZVP for Cu) basis set were used in the high‐level part of ONIOM calculations, with the HF/3‐21G, B3LYP/LANL2DZ, M06/LANL2DZ, and M062X/LANL2DZ methods in the low‐level part. The ability of suitable combinations of the above methods to reproduce (i) the crystallographic structure of purely siliceous ZSM‐5, (ii) the tendency of Cu⁺ to be twofold or fourfold coordinated by framework oxygen atoms of Cu‐ZSM‐5, and (iii) the interaction energy and the N? O stretching frequency of adsorbed nitrogen oxide are discussed, showing that different results are obtained depending on the adopted computational approach. With reference to above properties, some considerations about the employment of the ONIOM approximations are also included. © 2015 Wiley Periodicals, Inc.     

A Cationic Oligomer as an Organic Template for Direct Synthesis of Aluminosilicate ITH Zeolite

There are a large number of zeolites, such as ITH, that cannot be prepared in the aluminosilicate form. Now, the successful synthesis of aluminosilicate ITH zeolite using a simple cationic oligomer as an organic template is presented. Key to the success is that the cationic oligomer has a strong complexation ability with aluminum species combined with a structural directing ability for the ITH structure similar to that of the conventional organic template. The aluminosilicate ITH zeolite has very high crystallinity, nanosheet‐like crystal morphology, large surface area, fully four‐coordinated Al species, and abundant acidic sites. Methanol‐to‐propylene (MTP) tests reveal that the Al‐ITH zeolite shows much higher selectivity for propylene and longer lifetime than commercial ZSM‐5. FCC tests show that Al‐ITH zeolite is a good candidate as a shape‐selective FCC additive for enhancing propylene and butylene selectivity.     

Adsorption of NH(3) and H(2)O in acidic chabazite. Comparison of ONIOM approach with periodic calculations

The adsorption of NH(3) and H(2)O in acidic chabazite has been studied with the B3LYP method within the cluster approach (5T, 48T clusters) and the periodic approach adopting a Si/Al = 11/1 chabazite and a basis set of polarized double-zeta quality. The 5T cluster has been treated fully ab initio at the B3LYP level whereas the 48T cluster has been treated with the ONIOM2 scheme using B3LYP as the high level of theory and the MNDO, AM1, and HF/3-21G methods as low levels of theory. Periodic calculations show that the adsorption of NH(3) in acidic chabazite takes place through an ion pair (NH(4)(+)-CHA(-)) structure, the computed adsorption energy being -32 kcal/mol. The adsorption of H(2)O leads to a hydrogen bonded (H(2)O-HCHA) complex with the computed adsorption energy of -20 kcal/mol. All ONIOM combinations provide similar structures to those obtained with periodic calculations. Adsorption energies, however, are sensitive to the low level used, especially for NH(3). The ONIOM B3LYP:HF/3-21G method is the one that provides more satisfactory results. Present results show that, for larger zeolites, the ONIOM scheme can be successfully applied while drastically reducing the cost of a fully ab initio treatment.     

Phosphatation of Zeolite H‐ZSM‐5: A Combined Microscopy and Spectroscopy Study

A variety of phosphated zeolite H‐ZSM‐5 samples are investigated by using a combination of Fourier transfer infrared (FTIR) spectroscopy, single pulse ²⁷Al, ²⁹Si, ³¹P, ¹H‐³¹P cross polarization (CP), ²⁷Al‐³¹P CP, and ²⁷Al 3Q magic angle spinning nuclear magnetic resonance (MAS NMR) spectroscopy, scanning transmission X‐ray microscopy (STXM) and N₂ physisorption. This approach leads to insights into the physicochemical processes that take place during phosphatation. Direct phosphatation of H‐ZSM‐5 promotes zeolite aggregation, as phosphorus does not penetrate deep into the zeolite material and is mostly found on and close to the outer surface of the zeolite, acting as a glue. Phosphatation of pre‐steamed H‐ZSM‐5 gives rise to the formation of a crystalline tridymite AlPO₄ phase, which is found in the mesopores of dealuminated H‐ZSM‐5. Framework aluminum species interacting with phosphorus are not affected by hydrothermal treatment. Dealuminated H‐ZSM‐5, containing AlPO₄, retains relatively more framework Al atoms and acid sites during hydrothermal treatment than directly phosphated H‐ZSM‐5.     

The Effect of Ge Incorporation on the Brønsted Acidity of ZSM‐5

The effect of the isomorphous substitution of some of the Si atoms in ZSM‐5 by Ge atoms on the Brønsted acid strength has been investigated by i) DFT calculations on cluster models of the formula ((HO)₃SiO)₃‐Al‐O(H)‐T‐(OSi(OH)₃)₃, with T=Si or Ge, and ((HO)₃SiO)₃‐Al‐O(H)‐Si‐(OGe(OH)₃)(OSi(OH)₃)₂, ii) a ³¹P NMR study of zeolite samples contacted with trimethyl phosphine oxide probe molecules and iii) a X‐ray photoelectron spectroscopy (XPS) study of ZSM‐5 and Ge‐ZSM‐5 samples. The calculations reveal that the effect of Ge incorporation on the framework acidity strongly depends on the degree of substitution and on the exact T‐atom positions that are occupied by Ge. High Ge concentrations allow for enhanced stabilisation of the deprotonated Ge‐ZSM‐5 through structural relaxation, resulting in a slightly higher acidity as compared to ZSM‐5. This structural relaxation is not achievable in Ge‐ZSM‐5 with a low Ge content, which therefore has a slightly lower acidity than ZSM‐5. The NMR study indicates no difference between the Brønsted acidity of ZSM‐5(47) and Ge(0.09)ZSM‐5(36). Instead, evidence for the presence of a substantial amount of Ge? OH groups in the Ge‐containing samples was obtained from the NMR results, which is consistent with earlier FTIR studies. The XPS results do not point to an effect of Ge on the framework acidity of ZSM‐5(47), instead, the results can be best interpreted by assuming the presence of additional Ge? OH and Si? OH groups near the surface of the Ge(0.08)ZSM‐5(47) sample.     

The porosity, acidity, and reactivity of dealuminated zeolite ZSM-5 at the single particle level: the influence of the zeolite architecture

A combination of atomic force microscopy (AFM), high‐resolution scanning electron microscopy (HR‐SEM), focused‐ion‐beam scanning electron microscopy (FIB‐SEM), X‐ray photoelectron spectroscopy (XPS), confocal fluorescence microscopy (CFM), and UV/Vis and synchrotron‐based IR microspectroscopy was used to investigate the dealumination processes of zeolite ZSM‐5 at the individual crystal level. It was shown that steaming has a significant impact on the porosity, acidity, and reactivity of the zeolite materials. The catalytic performance, tested by the styrene oligomerization and methanol‐to‐olefin reactions, led to the conclusion that mild steaming conditions resulted in greatly enhanced acidity and reactivity of dealuminated zeolite ZSM‐5. Interestingly, only residual surface mesoporosity was generated in the mildly steamed ZSM‐5 zeolite, leading to rapid crystal coloration and coking upon catalytic testing and indicating an enhanced deactivation of the zeolites. In contrast, harsh steaming conditions generated 5–50 nm mesopores, extensively improving the accessibility of the zeolites. However, severe dealumination decreased the strength of the Brønsted acid sites, causing a depletion of the overall acidity, which resulted in a major drop in catalytic activity.     

Adsorption of polyethylene from thermodynamically good solvents on a zeolite stationary phase

Adsorption of linear polyethylene and isotactic polypropylene on columns packed with zeolites ZSM‐5, Y, and silicalite was studied using high‐temperature liquid phase chromatography. Linear polyethylene was fully retained on a column packed with ZSM‐5 zeolite from non‐polar solvents, such as 1,1,2,2‐tetrachloroethane and 1,3,5‐trimethylbenzene at a temperature of 140°C. Partial adsorption on ZSM‐5 zeolite was found for polyethylene in 1,2,4‐trichlorobenzene and on silicalite from 1,2,4‐trichlorobenzene and 1,3,5‐trimethylbenzene. On the other hand, adsorption of polyethylene was not found from polar liquids, such as 2‐ethylhexyl acetate, cyclohexyl acetate, and cyclohexanone. Isotactic polypropylene was not adsorbed on any tested sorbent.     

Alcohol Dehydrations over ZSM‐5 Type Zeolites,Montmorillonite Clays and Pillared Montmorillonites

The reactions of aliphatic alcohols (ethanol, 1‐propanol and 2‐propanol) were studied at 1 atm and 150–300°C by using ZSM‐5 type zeolites, montmorillonites, and pillared montmorillonites. With H‐ZSM‐5 (X) Y zeolites, the total number of acid sites increases with a decrease of Si0₂/Al₂O₃ molar ratio (X) and calcining temperature (Y). In addition, apparent increase in the ratio of strong to weak acid sites occurs with increasing X or decreasing Y. The acidities of M‐ZSM‐5 (51) 600 zeolites follow the sequence: Li = Na < K < Cs. Pillared clays exhibit both larger surface areas and more acid sites than the clays. The alcohol conversions decrease in the order of 2‐propanol < 1‐propanol < ethanol, in accordance with the relative stabilities of the corresponding carbenium ions. The catalytic activities are parallel to the total number of catalyst acid sites and the reaction temperature. Favorable formations of ethers are observed at low reaction temperature and small contact time on a catalyst with weak acid strength. Simple consecutive reactions and combined pathway of parallel and consecutive reactions are proposed, respectively, for the dehydration of ethanol and for those of 1‐propanol and 2‐propanol.     

Study of the grafting reaction of SnMe4 on the surface of ZSM‐5 zeolite

The grafting reaction of tetramethyltin on the surface of ZSM‐5 zeolite (Si:Al = 55.0) was studied under vacuum conditions, and the chemical compositions, structure and properties of the resulting solid were characterized by in situ FTIR, ICP, XRD, XPS, UV–vis DRS, temperature programmed decomposition (TPD) and N₂ adsorption. The results show that the reaction occurs on the surface of ZSM‐5 zeolite at 223 K without destroying the zeolite framework. The BET surface area and the pore volume of the zeolite decrease and the surface properties change; however, the microporous structure is retained during the reaction and post treatment. Copyright © 2006 John Wiley & Sons, Ltd.     

Enthalpy and Entropy Barriers Explain the Effects of Topology on the Kinetics of Zeolite‐Catalyzed Reactions

The methylation of ethene, propene, and trans‐2‐butene on zeolites H‐ZSM‐58 (DDR), H‐ZSM‐22 (TON), and H‐ZSM‐5 (MFI) is studied to elucidate the particular influence of topology on the kinetics of zeolite‐catalyzed reactions. H‐ZSM‐58 and H‐ZSM‐22 are found to display overall lower methylation rates compared to H‐ZSM‐5 and also different trends in methylation rates with increasing alkene size. These variations may be rationalized based on a decomposition of the free‐energy barriers into enthalpic and entropic contributions, which reveals that the lower methylation rates on H‐ZSM‐58 and H‐ZSM‐22 have virtually opposite reasons. On H‐ZSM‐58, the lower methylation rates are caused by higher enthalpy barriers, owing to inefficient stabilization of the reaction intermediates in the large cage‐like pores. On the other hand, on H‐ZSM‐22, the methylation rates mostly suffer from higher entropy barriers, because excessive entropy losses are incurred inside the narrow‐channel structure. These results show that the kinetics of crucial elementary steps hinge on the balance between proper stabilization of the reaction intermediates inside the zeolite pores and the resulting entropy losses. These fundamental insights into their inner workings are indispensable for ultimately selecting or designing better zeolite catalysts.     

Thermodynamics of Carbon Dioxide Adsorption on the Protonic Zeolite H‐ZSM‐5

Adsorption of carbon dioxide on H‐ZSM‐5 zeolite (Si:Al=11.5:1) was studied by means of variable‐temperature FT‐IR spectroscopy, in the temperature range of 310–365 K. The adsorbed CO₂ molecules interact with the zeolite Brønsted‐acid OH groups bringing about a characteristic red‐shift of the O? H stretching band from 3610 cm^?1 to 3480 cm^?1. Simultaneously, the ν₃ mode of adsorbed CO₂ is observed at 2345 cm^?1. From the variation of integrated intensity of the IR absorption bands at both 3610 and 2345 cm^?1, upon changing temperature (and CO₂ equilibrium pressure), the standard adsorption enthalpy of CO₂ on H‐ZSM‐5 is ΔH⁰=?31.2(±1) kJ mol^?1 and the corresponding entropy change is ΔS⁰=?140(±10) J mol^?1 K^?1. These results are discussed in the context of available data for carbon dioxide adsorption on other protonic, and also alkali‐metal exchanged, zeolites.