Poly(ethyleneimine) microcapsules: glutaraldehyde‐mediated assembly and the influence of molecular weight on their properties

Poly(ethyleneimine) (PEI) microcapsules were prepared via the method of glutaraldehyde (GA)‐mediated covalent layer‐by‐layer (LbL) assembly, which utilized GA to cross‐link the adsorbed PEI layer and to introduce free aldehyde group on the surface for the next PEI adsorption on MnCO₃ microparticles, followed by core removal. Evidenced by ellipsometry, the PEI multilayers grew nearly linearly along with the layer number and their thickness was controlled at the nanometer scale. The hollow structure, morphology, and wall thickness were characterized by scanning electron microscopy (SEM), scanning force microscopy (SFM), and confocal laser scanning microscopy (CLSM), revealing that the capsule structure as well as the cut‐off molecular weight of the capsule wall could be tuned by the molecular weight of PEI. This offers a general and novel pathway to fabricate single component capsules with pre‐designed structure (size, shape, and wall thickness) and properties. Copyright © 2007 John Wiley & Sons, Ltd.     

Single Polyelectrolyte Microcapsules Fabricated By Glutaraldehyde‐Mediated Covalent Layer‐By‐Layer Assembly

Summary: Single polyelectrolyte component microcapsules and multilayers, exemplified by poly(allylamine hydrochloride) (PAH), have been prepared using a method of glutaraldehyde (GA)‐mediated covalent layer‐by‐layer (LbL) assembly. The GA cross‐linking of the adsorbed PAH results in surfaces covered by reactive aldehyde groups, which can then react with PAH to result in another layer of covalently linked PAH. The repeated assembly of single polyelectrolyte in an LbL manner can be thus achieved. The PAH multilayers can grow linearly along with the layer number, and their thickness can be controlled at the nanometer scale, as verified by UV‐vis absorption spectrometry and ellipsometry. Single polyelectrolyte microcapsules are obtained after removal of the template cores at low pH. The morphology and integrity are confirmed by scanning force microscopy and confocal laser scanning microscopy.

Schematic illustration of the preparation of a single polyelectrolyte component microcapsule by GA‐mediated covalent LbL assembly.     

Micelles‐Encapsulated Microcapsules for Sequential Loading of Hydrophobic and Water‐Soluble Drugs

Layer‐by‐layer (LbL) assembly was conducted on CaCO₃ microparticles pre‐doped with polystyrene‐block‐poly(acrylic acid) (PS‐b‐PAA) micelles, and resulted in micelles encapsulation in the microcapsules after core removal. Distribution of the micelles in the templates and capsules was characterized by transmission electron microscopy and confocal laser scanning microscopy. The micelles inside the capsules connected with each other to form a chain and network‐like structure with a higher density near the capsule walls. The hydrophobic PS cores were then able to load small uncharged hydrophobic drugs while the negatively charged PAA corona could induce spontaneous deposition of water‐soluble positively charged drugs such as doxorubicin.

     

Stimuli‐responsive micelles of amphiphilic AMPS‐b‐AAL copolymers in layer‐by‐layer films

Aqueous reversible addition‐fragmentation chain transfer polymerization was used to synthesize poly(N‐[3‐(dimethylamino)propyl]acrylamide) (PDMAPA) cationic homopolymers and micelle‐forming, pH‐responsive, amphiphilic diblock copolymers of poly(sodium 2‐acrylamido‐2‐methyl‐1‐propanesulfonate‐block‐N‐acryloyl‐L ‐alanine) (P(AMPS‐b‐AAL)). At low pH, the AAL blocks are protonated rendering them hydrophobic, whereas the AMPS blocks remain anionically charged because of the pendant sulfonate groups. Self‐assembly results in core–shell micelles consisting of hydrophobic cores of AAL and negatively charged shells of AMPS. Using solutions of these micelles with anionic coronas and of the cationic homopolymer PDMAPA, layer‐by‐layer (LbL) films were assembled at low pH, maintaining the micelle structures. Several block copolymers with varying AMPS and AAL block lengths were synthesized and used in the formation of LbL films. The thickness and morphology of the films were examined using ellipsometry and atomic force microscopy. The stimuli‐responsive behavior can be triggered by submersion of the film in water at neutral pH to disrupt the micelles. This behavior was monitored by observing the decrease in film thickness and alteration of the film morphology. The micelles were also loaded with a model hydrophobic compound, pyrene, and incorporated into LbL films. The release of pyrene from the films was monitored by fluorescence spectroscopy at varying pH values (1, 3, 5, and 7). As the pH of the solution increases, the rate of release increases. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Layer‐by‐layer ionomer films made from poly(styrene‐co‐styrenesulfonic acid) and poly(methyl methacrylate‐co‐4‐vinylpyridine) in tetrahydrofuran

Thin films were fabricated layer‐by‐layer (LbL) via ionic bonds formed between a cationic ionomer and an anionic ionomer, which were produced via proton transfer from poly(styrene‐co‐styrenesulfonic acid) to poly(methyl methacrylate‐co‐4‐vinylpyridine) in an organic solvent, tetrahydrofuran. Ionic contents of the ionomers were very low down to 5.6 mol %, much lower than usual polyelectrolytes. The build up of the LbL films was demonstrated by UV/vis spectroscopy: the absorbance of the phenyl rings in styrene residues increased with the number of depositions (thus the number of layers). Transmission electron microscopy observation of strained thin films showed unique deformation mode, involving many bands that developed both in the parallel and perpendicular directions to the stress axis. This is quite different from the deformation modes seen for ionomer blend films and for coextruded polystyrene/poly(methyl methacrylate) multilayer tapes. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 101–105, 2012     

Microgel-based engineered nanostructures and their applicability with template-directed layer-by-layer polyelectrolyte assembly in protein encapsulation

A novel strategy for the fabrication of microcapsules is elaborated by employing biomacromolecules and a dissolvable template. Calcium carbonate (CaCO(3)) microparticles were used as sacrificial templates for the two-step deposition of polyelectrolyte coatings by surface controlled precipitation (SCP) followed by the layer-by-layer (LbL) adsorption technique to form capsule shells. When sodium alginate was used for inner shell assembly, template decomposition with an acid resulted in simultaneous formation of microgel-like structures due to calcium ion-induced gelation. An extraction of the calcium after further LbL treatment resulted in microcapsules filled with the biopolymer. The hollow as well as the polymer-filled polyelectrolyte capsules were characterized using confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), and scanning force microscopy (SFM). The results demonstrated multiple functionalities of the CaCO(3) core - as supporting template, porous core for increased polymer accommodation/immobilization, and as a source of shell-hardening material. The LbL treatment of the core-inner shell assembly resulted in further surface stabilization of the capsule wall and supplementation of a nanostructured diffusion barrier for encapsulated material. The polymer forming the inner shell governs the chemistry of the capsule interior and could be engineered to obtain a matrix for protein/drug encapsulation or immobilization. The outer shell could be used to precisely tune the properties of the capsule wall and exterior. [Diagram: see text] Confocal laser scanning microscopy (CLSM) image of microcapsules (insert is after treating with rhodamine 6G to stain the capsule wall).     

Unusual collapse of highly hydrated polyelectrolyte multilayers with the ionic strength

Highly hydrated polyelectrolyte multilayers (PEMs) were fabricated by “layer by layer” (LBL) assembly of poly (diallyl dimethyl ammonium chloride) (PDADMAC) and poly (sodium 4‐styrene sulfonate) (PSS) in 0.5 M NaCl. Both thickness and hydration of the film were determined in situ as the multilayer was assembled by means of the quartz crystal microbalance with dissipation (QCM‐D) and the Spectroscopic Ellipsometry techniques combined in a single device. For PEMs of 17 total layers in water, a final thickness of up to 300 nm and a hydration of 69% were measured. The response towards the ionic strength was then studied by means of QCM‐D. PEMs of 17 layers, with PDADMAC as last layer, shrunk dramatically and lost water when exposed to aqueous NaCl solutions of increasing concentration. Indeed, a thickness variation up to 100 nm and reduction in the 50% of the water content were observed when the PEM was exposed to 1 M NaCl. On the contrary, PEMs where PSS appears on top showed no measurable change upon the variation in the ionic strength. This brings the possibility to control the responsive character of the PEMs simply by selecting the last polyelectrolyte layer (PDADMAC or PSS) deposited. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Polyelectrolyte multilayers prepared on hydrogel surfaces

Poly(vinyl alcohol) hydrogels were alternately immersed in aqueous solutions of oppositely charged polymers. The adsorption of the cationic dye methylene blue to the immersed hydrogels suggested the presence of a coating on the hydrogel surfaces. Static contact angles with an air bubble in water showed layer‐by‐layer growth of the films. The films could be transferred onto solid substrates for mechanical strength after the hydrogels were placed on the solid substrates, and this resulted in an estimation of the film thickness. The number of assembly steps could regulate the film thickness. We present here coatings of hydrogels with thin polymer films prepared by layer‐by‐layer assembly. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1062–1067, 2005     

Magnetic‐targeted pH‐responsive drug delivery system via layer‐by‐layer self‐assembly of polyelectrolytes onto drug‐containing emulsion droplets and its controlled release

Novel magnetic‐targeted pH‐responsive drug delivery system have been designed by the layer‐by‐layer self‐ assembly of the polyelectrolytes (oligochitosan as the polycation and sodium alginate as the polyanion) via the electrostatic interaction with the oil‐in‐water type hybrid emulsion droplets containing the superparamagnetic ferroferric oxide nanoparticles and drug molecules [dipyridamole (DIP)] as cores. Here the drug molecules were directly encapsulated into the interior of droplets without etching the templates and refilling with the desired guest molecules. The drug‐delivery system showed high encapsulation efficiency of drugs and drug‐loading capacity. The cumulative release ratio of dipyridamole from the oligochitosan/sodium alginate multilayer‐encapsulated magnetic hybrid emulsion droplets (DIP/Fe₃O₄‐OA/OA)@(OCS/SAL)₄ was up to almost 100% after 31 h at pH 1.8. However, the cumulative release ratio was only 3.3% at pH 7.4 even after 48 h. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Effect of amino and polysiloxane groups on the chemical adsorption of polymers containing thiophosphate at the oil/metal interface under extreme pressure

Copolymers that separately contained thiophosphate–polysiloxane, thiophosphate–amino, and thiophosphate–polysiloxane–amino groups were synthesized and characterized. The performances of these synthesized copolymers on metal surfaces under a high load and rotary velocity were examined by the measurement of the oil temperature, frictional coefficient, and electrical contact resistance between two metal surfaces. The configuration of the adsorption layer was studied with energy‐dispersive spectrometry (EDS) and scanning electron microscopy (SEM). Copolymers that contained amino–thiophosphate groups reduced the frictional coefficient between two metal surfaces and markedly limit the increase in the oil temperature. Notably, a higher content of polysiloxane groups in the copolymer corresponded to an increased operating time to establish the adsorption layer on the metal surface. However, a higher content of amino groups reduced the time required for the layer to form. The adsorption layers that formed on the metal surfaces were investigated by EDS as phosphides produced by a chemical reaction of the thiophosphate‐containing copolymer with the metal surface. These adsorption layers on the metal surface were directly observed with SEM. The layer that formed on the metal surface of copolymers containing less polysiloxane and more amino groups was the thickest layer for all the synthesized copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1795–1803, 2002     

Synthesis and optical and electroluminescent properties of novel conjugated polyelectrolytes and their neutral precursors derived from fluorene and benzoselenadiazole

Novel copolymers derived from amino‐functionalized fluorene‐ and selenium‐containing heterocycles [2,1,3‐benzoselenadiazole (BSeD)] were synthesized by the palladium‐catalyzed Suzuki coupling method. Their quaternized salt polyelectrolytes of corresponding compositions were obtained by a postpolymerization treatment. The resulting copolymers were soluble in polar solvents. An efficient energy transfer due to exciton trapping on the BSeD sites was observed. Devices from such copolymers emitted orange‐red light peaked at 560–610 nm. All the polymers showed good device performance with high‐work‐function metal Al as a cathode without the use of an additional electron‐injection layer and are promising candidates for polymer light‐emitting diode applications. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2521–2532, 2006     

Mobility of single DNA chain under electric field during its transient contact with solid surfaces

The motion of DNA chain under electric field when it is in transient contact with the solid surfaces in aqueous solution was studied by single molecule fluorescence microscopy at the total internal reflection geometry (TIRFM). In situ observation discovered that single λ-DNA chains driven by electric field made transient contact with the solid surface and made hitting–sliding–leaving-like motion along the surface. By varying the surface chemistry, from the negative-charged silanol group-rich surface to positive-charged amino group-rich surface, as well as hydrophobic surfaces, the dependence of DNA mobility on the surface–DNA interaction was studied. The results show that a dependence of the mobility of DNA on the surface polarity with respect to DNA itself. The study on different surfaces rich of silanol, amide, amino, and methyl groups show a sequence of DNA mobility of silanol > amide > amino. The mobility of DNA on methyl terminated surface was found to be similar to that on amino surface. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 2541–2546, 2009     

Photocatalytically Active Polyelectrolyte/Nanoparticle Films for the Elimination of a Model Odorous Gas

Virtually transparent films of Aeroxide TiO₂ P25 were fabricated via layer‐by‐layer assembly with sodium poly(styrene sulfonate). Nanoscale films are formed on model surfaces for characterization or inside of cylindrical reactors for investigating the catalytic properties. Films are fairly homogeneous and smooth over large areas and show different optical interference colors depending on film thickness. The application‐relevant photocatalytic performance of such films toward on‐flow degradation of hydrogen sulfide under UV‐A irradiation was investigated. Scanning electron microscopy reveals a nanoporous structure allowing for the permeation of gas. Consequently, the catalytic efficiency of the films increases with increasing film thickness retaining a considerable activity of the corresponding nanoparticle powder. Scheme 1 depicts in a general way the functionalized reactor and the principle of the measurement.     

Hydrophobically modified polyelectrolyte for improved oxygen barrier in nanobrick wall multilayer thin films

The influence of attaching hydrophobic side groups to a polyelectrolyte, used for deposition of a multilayer oxygen gas barrier thin film, was investigated. Polyethyleneimine (PEI) was labeled with pyrene and deposited in “quadlayers” of PEI, poly(acrylic acid), PEI, and sodium montmorillonite clay using layer‐by‐layer assembly. Thin films made of three repeating quadlayers using unmodified PEI had much lower density (1.24 g/cm³) than pyrene‐labeled PEI‐based films (1.45 g/cm³), which is believed to be the result of greater chain coiling from the increased hydrophobicity of pendant pyrene groups. This increased density in pyrene‐labeled PEI layers allowed three quadlayers to match the oxygen transmission rate of a four quadlayer film made with unmodified PEI. This discovery provides an additional tool for tailoring the barrier behavior of clay‐based multilayer thin films that could prove useful for a variety of packaging applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1153–1156     

Organic/inorganic hybrid nanospheres coated with palladium/P4VP shells from surface‐initiated atom transfer radical polymerization

Crosslinked poly(4‐vinylbenzyl chloride) (PVBC) nanospheres of about 160 nm were first synthesized by emulsion copolymerization of 4‐vinylbenzyl chloride (VBC) in the presence of a crosslinking agent, p‐divinylbenzene. Subsequent modification of the nanosphere surfaces via surface‐initiated atom transfer radical polymerization of 4‐vinylpyridine, using the VBC units of PVBC on the nanosphere surface as the macroinitiators, produced a well‐defined and covalently tethered poly(4‐vinylpyridine) (P4VP) shells of 24–27 nm in thickness. Activation of the P4VP shells in a PdCl₂ solution, followed by reactions with CO or H₂S gas, gave rise to the corresponding P4VP composite shells containing densely dispersed palladium metal or palladium sulfide nanoparticles. The chemical composition of the nanosphere surfaces at various stages of surface modification was characterized by X‐ray photoelectron spectroscopy. Field emission scanning electron microscopy and transmission electron microscopy were used to characterize the morphology of the organic/inorganic hybrid nanospheres coated with palladium/P4VP shells. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2119–2131, 2008     

Effect of block molecular weight distribution on the structure formation in block copolymer/homopolymer blends

The effect of homopolymer (hP) addition on the structure formation in lamellar amorphous block copolymers (BCP) with narrow‐ and broad‐molecular weight distribution (MWD) was studied using small‐angle X‐ray scattering and transmission electron microscopy. The systems in our study consist of blends of a poly(styrene‐b‐methyl acrylate) copolymer with block‐selective broad MWD of the poly(methyl acrylate) domain as well as polystyrene and poly(methyl acrylate) hPs with molecular weight less than the corresponding block of the copolymer. Homopolymer addition to the broad MWD domain of the BCP is found to induce structural changes similar to narrow MWD BCP/hP blend systems. Conversely, addition of hP to the narrow MWD domain is found to induce a more pronounced expansion of lamellar domains due to the segregation of the hP to the center region within the host copolymer domain. With increasing hP concentration, the formation of a stable two‐phase regime with coexisting lamellar/gyroid microphases is observed that is bounded by uniform lamellar phase regimes that differ in the distribution of hP within the corresponding narrow MWD block domain. The segregation of low‐molecular weight hP to the center region of the narrowdisperse domains of a broad MWD BCP is rationalized as a consequence of the more stretched chain conformations within the narrowdisperse block that are implied by the presence of a disperse adjacent copolymer domain. The increase of chain stretching reduces the capacity of the narrowdisperse block to solubilize hP additives and thus provides a driving force for the segregation of hP chains to the center of the host copolymer domain. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 50: 106–116, 2012     

Weak polyelectrolytes tethered to surfaces: Effect of geometry,acid–base equilibrium and electrical permittivity

The structural and thermodynamical properties of weak polyelectrolytes end-tethered to surfaces of arbitrary geometry are studied using a molecular theory. The theory is based on writing down the free energy functional of the system including all the basic interactions and the explicit acid–base equilibrium for the chargeable groups of the polymer. The theory explicitly includes the size, shape, conformations, and charge distribution of all the molecular species. The electrostatic interactions include a density-dependent dielectric function, modeled with the Maxwell–Garnett mixing formula, to account for the composition-dependent permittivity. The minimization of the free energy leads to the distribution of all molecular species and their dependence on bulk pH and salt concentration. We apply the theory to polymer chains end-tethered to planar, cylindrical, and spherical surfaces. The radius of the curved surfaces is small to enhance the curvature effect. We find that when the grafting surfaces are uncharged, the approximation of a constant dielectric function works very well for both structural and thermodynamic properties. The structure of weak polyelectrolytes tethered on cylindrical and spherical surfaces is different from that of polymers tethered on planar surfaces due to the available volume as a function of the distance from the surface. Specifically, the degree of dissociation increases with increasing curvature of the surface. This is a manifestation of the coupling between the local density of protons, counterions, and polymer segments. The results can be interpreted in terms of the local Le Chatelier principle for the acid–base equilibrium, with proper account of the three local contributions: counterions, protons, and chargeable groups. We find that one can achieve local changes of pH between one to two units within 1–2 nm. The thickness of the tethered layers as a function of bulk pH shows a large increase when the pH is equal to the bulk pK. However, the variation with salt concentration is different for the different geometries. The largest swelling is found for cylindrical surfaces. The predictions from scaling theories of a maximum in the thickness of the film as a function of salt concentration is found for planar films, but not for curved surfaces. Finally, the interactions between cylinders with tethered polyelectrolytes is very different from the equivalent planar surfaces. These results are important for the interpretation of force measurements with nanoscale AFM tips. The implications of the results for the rational design of responsive tethered polymer layers is discussed together with the limitations of the theoretical approach. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2638–2662, 2006     

Facile preparation of superhydrophobic and oleophobic surfaces via the combination of Cu(0)‐mediated reversible‐deactivation radical polymerization and click chemistry

The fabrication of novel hydrophobic, superhydrophobic, and oleophobic surfaces on glass using nanosilica particles modified with polymer brushes prepared via surface initiated Cu(0)‐mediated reversible‐deactivation radical polymerization was demonstrated. Monomers including n‐butyl acrylate, 2,2,2‐trifluoroethyl methacrylate, and 1,1,1,3,3,3‐hexafluoroisopropyl acrylate were used to synthesize a series of nanosilica–polymer organic/inorganic hybrid materials. Products were analyzed using infrared spectroscopy, thermogravimetric analysis, scanning and transmission electron microscopy. The coated nanosilica showed core–shell structures that contains polymer brushes up to 67 wt %. The application of these particles for modifying surface wettability was examined by covalently attaching them to glass via a recently developed one‐pot “grafting to” methodology using “thio‐bromo click” chemistry. Atomic force microscopy topographic images show up to 25 times increase in roughness of the coated glass compared to blank glass sample. Contact angle measurements showed that nanosilica coated with PBA and PTFEM produced hydrophobic glass surfaces, while a superhydrophobic and oleophobic surface was generated using nanosilica functionalized with PHFIPA. This novel methodology can produce superhydrophobic and oleophobic surfaces in an easy and fast way without the need for tedious and time‐consuming processes, such as layer‐by‐layer deposition, high temperature calcination, and fluorinated oil infusion. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018     

Conjugated polyelectrolytes and neutral polymers with poly(2,7‐carbazole) backbone: Synthesis,characterization, and photovoltaic application

Poly(2,7‐carbazole) neutral polymers (PC‐N, PC‐NOH, and PC‐P) and polyelectrolytes (PC‐NBr and PC‐SO₃Na) with hydrophilic pendant groups of ammonium, phosphonate, and sulfonate were synthesized as interlayers for cathode modifications in bulk‐heterojunction photovoltaic cells (BHJ PVCs). The absorptions of the polymers were determined by the poly(2,7‐carbazole) backbone, showing absorption peaks at ～390 nm for their solutions and films. Because of large intermolecular interactions, excimer emissions with wavelengths higher than 500 nm were found in the photoluminescence spectra of the films of the polymers, which weakened the light emissions of the polymers. PC‐N, PC‐NBr, PC‐NOH, and PC‐P possessed comparable HOMO levels of ?5.23 eV and LUMO levels of ?2.4 eV, but HOMO and LUMO levels of PC‐SO₃Na were up‐lying to ?4.91 and ?2.12 eV, respectively. PC‐N, PC‐NBr, PC‐NOH, and PC‐P were selected to construct thin interlayers in BHJ PVCs with PFO‐DBT35:PCBM = 1:4 as the active layer. Compared with traditional Al cathode, bilayer cathodes with the interlayers showed improvements of open‐circuit voltages and short‐circuit currents of the PVCs. PC‐NOH was the best for the photovoltaic performances and over 20% increase of power conversion efficiency (PCE) was achieved. The bilayer cathodes would have great potential to further elevate PCE of BHJ PVCs with other active layer materials. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Solution properties of stilbene‐containing sterically crowded alternating polyanions

Sterically crowded stilbene‐containing alternating polyanions were prepared via an indirect strategy of synthesizing “protected” monomers followed by deprotection and neutralization of the polyanion precursors. The solution properties of these new sterically crowded polyelectrolytes were studied. Steady‐state solution shear rheology showed a pronounced polyelectrolyte effect. The persistence lengths of these polyelectrolytes were determined. The dissociation behavior of the polyanions was investigated by pH titration with HCl, and multistep dissociation behavior was observed. Chain size and aggregation were studied by using DLS at varying ionic strengths. Polyelectrolytes behaved like rigid‐rods and formed concentrated solutions at the polymer concentration of 1.0 mg mL^?1. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1565–1570