Synthesis of linear and 4‐arm star block copolymers of poly(methyl acrylate‐b‐solketal acrylate) by SET‐LRP at 25 °C

The new SET‐LRP (using Cu(0) powder for organic synthesis) was successfully used to produce well‐defined linear and star homo‐ and diblock‐copolymers of PMA, PSA, and P(MA‐b‐GA)_n (where n = 1 or 4). The kinetic data showed that all SET‐LRP were first order and reached high conversions in a short period of time. The other advantage of using such a system is that the copper can easily be removed through filtration, allowing the production of highly pure polymer. The molecular weight distributions were well controlled with polydispersity indexes below 1.1 and the number‐average molecular weight close to theory, especially upon the addition of Cu(II)Br₂/Me₆‐TREN complex. The linear and star block copolymers were then hydrolyzed to produce the biocompatible amphiphilic P(MA‐b‐GA)_n, where the glycerol side‐groups make the outer block hydrophilic. These blocks were micellized into water and found to have a R_g/R_H equal to 0.8 and 1.59 for the liner and star blocks, respectively. This together with the TEM's supported that the linear blocks formed the classical core‐shell micelles, where as, the star blocks formed vesicles. We found direct support for the vesicle structure from a TEM where one vesicle squashed a second vesicle consistent with a hollow structure. Such vesicle structures have potential applications as delivery nanoscaled devices for drugs and other important biomolecules. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6346–6357, 2008     

Investigation by combined solid‐state NMR and SAXS methods of the morphology and domain size in polystyrene‐b‐polyethylene oxide‐b‐polystyrene triblock copolymers

The microphase structure of a series of polystyrene‐b‐polyethylene oxide‐b‐polystyrene (SEOS) triblock copolymers with different compositions and molecular weights has been studied by solid‐state NMR, DSC, wide and small angle X‐ray scattering (WAXS and SAXS). WAXS and DSC measurements were used to detect the presence of crystalline domains of polyethylene‐oxide (PEO) blocks at room temperature as a function of the copolymer chemical composition. Furthermore, DSC experiments allowed the determination of the melting temperatures of the crystalline part of the PEO blocks. SAXS measurements, performed above and below the melting temperature of the PEO blocks, revealed the formation of periodic structures, but the absence or the weakness of high order reflections peaks did not allow a clear assessment of the morphological structure of the copolymers. This information was inferred by combining the results obtained by SAXS and ¹H NMR spin diffusion experiments, which also provided an estimation of the size of the dispersed phases of the nanostructured copolymers. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 55–64, 2010     

Controlled/living polymerization of methyl methacrylate using new sterically hindered imidazoline nitroxides prepared via intramolecular 1,3‐dipolar cycloaddition reaction

A series of imidazoline nitroxides with bulky spirocyclic moieties at the positions 2 or 5 of imidazole ring were synthesized using intramolecular 1,3‐dipolar cycloaddition in 2H‐imidazole 1‐oxides or 4H‐imidazole 3‐oxides with pent‐4‐enyl groups followed by isoxazolidine ring opening and oxidation. Capability of the nitroxides to control radical polymerization of methyl methacrylate (MMA) and styrene was investigated. For that purpose, alkoxyamines were synthesized from the aforementioned nitroxides and tert‐butyl α‐bromoisobutyrate. Homolysis rate constants of the alkoxyamines were measured and possible contributions of side reactions were quantified. Nitroxide‐mediated polymerization of styrene and MMA was studied using the alkoxyamines as initiators. MMA polymerization was found to proceed in controlled regime up to 55% of monomer conversion and the polymer obtained was able to reinitiate the polymerization of styrene. Quota of “living” chains estimated to reach 90%. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 929–943     

Real‐time Fourier transform infrared study of the free‐radical ultraviolet‐induced polymerization of a hybrid sol–gel. II. The effect of physicochemical parameters on the photopolymerization kinetics

Free‐radical photocurable hybrid sol–gel materials have gained special interest during the last decades. Compared to thermally processed materials, they present the advantages of fast curing, low energy consumption, and spatiotemporal control of the reaction. Although comprehension of the photochemical step is fundamental, little is known about the characteristic of photochemistry in this kind of material. Real‐time Fourier transform infrared spectroscopy was used to study the photopolymerization of a hybrid sol–gel upon ultraviolet irradiation. Various photoinitiator systems were tested for their efficiency in inducing the polymerization of pendant polymerizable moieties anchored on a partially condensed silicate network. The presence of O₂ and the nature of the polymerizable function were shown to be crucial factors in the photoinduced process. The effects of the photoinitiator concentration and light intensity were also studied. These results were explained in terms of classical kinetic models developed for all‐organic photopolymers to point out the distinctive aspects related to the use of photoinitiated polymerization in hybrid sol–gel materials. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 831–840, 2003     

Single‐electron transfer‐living radical copolymerization of butyl methacrylate and divinylbenzene for preparation of oil‐absorbing gel

Crosslinking copolymerization of butyl methacrylate with a small amount of divinylbenzene (DVB) was carried out using single‐electron transfer‐living radical polymerization initiated with carbon tetrachloride (CCl₄) and catalyzed by Cu(0)/N‐ligand in N,N‐dimethylformamide to produce a highly oil‐absorbing gel. The polymerization, gelation process, and oil‐absorbing properties were studied in detail. Analysis of monomer conversion with reaction time showed that the polymerization followed first‐order kinetics for both linear and crosslinking polymerization before gelation. Higher levels of DVB led to earlier gelation and the influence of N‐ligand on gelation was also significant. Under optimal conditions, oil absorption of the prepared gel to chloroform could reach 42.1 g·g^?1. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3233–3239     

Facile synthesis of core‐shell organic–inorganic hybrid nanoparticles with amphiphilic polymer shell by one‐step sol–gel reactions

Organic–inorganic hybrid core‐shell nanoparticles with diameters ranging from 100 to 1000 nm were prepared by a one‐pot synthesis based on base catalyzed sol–gel reactions using tetraethoxysilane and a triethoxysilane‐terminated polyethylene‐b‐poly(ethylene glycol) as reactants. Data from TEM, TGA, and solid‐state NMR analysis are in agreement with the formation of core‐shell nanoparticles with an inorganic‐rich core and an external shell consisting of an amphiphilic block copolymer monolayer. The influence of the organic–inorganic ratio, solution concentration, and postcuring temperature on core and shell dimensions of the nanospheres were investigated by TEM microscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1699–1709, 2008     

Synthesis of high performance polyacrylonitrile by RASA SET–LRP in the presence of Mg powder

High performance polyacrylonitrile (PAN) was prepared with Mg powder as both reducing agent (RA) and supplemental activator (SA) by single electron transfer‐living radical polymerization (RASA SET‐LRP). First‐order kinetics of polymerization with respect to monomer concentration, linear increase of molecular weight, and narrow polydispersity with monomer conversion, and the obtained high isotacticity PAN indicate that RASA SET‐LRP in the presence of Mg powder could simultaneously control molecular weight and tacticity of PAN. compared with that obtained with ascorbic acid (VC) as RA, an obvious increase in isotacticity of PAN was observed. the block copolymer pan‐b‐pAN with molecular weight at 112,460, polydispersity at 1.33, and isotacticity at 0.314 was successfully prepared. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3328–3332     

Synthesis and characterization of organic–inorganic hybrid block copolymers containing a fully condensed ladder‐like polyphenylsilsesquioxane

A series of inorganic–organic hybrid block copolymers were synthesized via atom transfer radical polymerization using a fully condensed, ladder‐like structured polyphenylsilsesquioxane end‐functionalized macroinitiator. The inorganic portion, ladder‐like polyphenylsilsesquioxane, was synthesized in a one‐batch, base‐catalyzed system, whereas organic hard and soft monomers, styrene, and n‐butyl acrylate, were polymerized and copolymerized on the ends of the linear, inorganic backbone. Synthesized hybrid diblock, triblock, and random copolymers were characterized by ¹H NMR, ²⁹Si NMR, gel permeation chromatography, static light scattering, Fourier transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. Hybrid block copolymers were well‐defined with low polydispersity (<1.4) and exhibited enhanced thermal properties in the form of increased glass transition and degradation onset temperatures over their organic analogues.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Immortal SET–LRP mediated by Cu(0) wire

Cu(0)‐wire/Me₆‐TREN is a well established catalyst for living radical polymerization via SET–LRP. Here, it is demonstrated that this polymerization is not just living, but it is in fact the first example of immortal living radical polymerization. The immortality of SET–LRP mediated with Cu(0) wire was demonstrated by attempting, in an unsuccessful way, to irreversible interrupt multiple times the polymerization via exposure to O₂ from air. SET–LRP indeed stopped each time when the reaction mixture was exposed to air. However, the SET–LRP reaction, was restarted each time after resealing the reaction vessel and reestablishing the catalytic cycle with the same Cu(0) wire, to produce the same conversion as in the conventional uninterrupted SET–LRP process. Despite the interruption by O₂, the reactivated SET–LRP had a good control of molecular weight, molecular weight evolution, and molecular weight distribution, with perfect retention of chain‐end fidelity. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2716–2721, 2010     

PEG‐b‐PtBA‐b‐PHEMA well‐defined amphiphilic triblock copolymer: Synthesis,self‐assembly,and application in drug delivery

A series of well‐defined amphiphilic triblock copolymers, poly(ethylene glycol)‐b‐poly(tert‐butyl acrylate)‐b‐poly(2‐hydroxyethyl methacrylate) (PEG‐b‐PtBA‐b‐PHEMA), were synthesized via successive atom transfer radical polymerization (ATRP). ATRP of tBA was first initiated by PEG‐Br macroinitiator using CuBr/N,N,N′,N″,N′″‐pentamethyldiethylenetriamine as catalytic system to give PEG‐b‐PtBA diblock copolymer. This copolymer was then used as macroinitiator to initiate ATRP of HEMA, which afforded the target triblock copolymer, PEG‐b‐PtBA‐b‐PHEMA. The critical micelle concentrations of obtained amphiphilic triblock copolymers were determined by fluorescence spectroscopy using N‐phenyl‐1‐naphthylamine as probe. The morphology and size of formed aggregates were investigated by transmission electron microscopy and dynamic light scattering, respectively. Finally, an acid‐sensitive PEG‐b‐PtBA‐b‐P(HEMA‐CAD) prodrug via cis‐aconityl linkage between doxorubicin and hydroxyls of triblock copolymers with a high drug loading content up to 38%, was prepared to preliminarily explore the application of triblock copolymer in drug delivery. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and self‐assembly of amphiphilic macrocyclic block copolymer topologies

We demonstrated the synthesis of miktoarm star block copolymers of AB, AB₂, and A₂B, in which block A consisted of linear poly(tert‐butyl acrylate) (P^tBA) and block B consisted of cyclic polystyrene. These structures were produced using the atom transfer radical polymerization to make telechelic polymers that, after modification, were further coupled together by copper‐catalyzed “click” reactions with high coupling efficiency. Deprotection of P^tBA to poly(acrylic acid) (PAA) afforded amphiphilic miktoarm structures that when micellized in water gave vesicle morphologies when the block length of PAA was 21 units. Increasing the PAA block length to 46 units produced spherical core‐shell micelles. AB₂ miktoarm stars packed more densely into the core compared to its linear counterpart (i.e., a four times greater aggregation number with approximately the same hydrodynamic diameter), resulting in the PAA arms being more compressed in the corona and extending into the water phase beyond its normal Gaussian chain conformation. These results show that the cyclic structure attached to an amphiphilic block has a significant influence on increasing the aggregation number through a greater packing density. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Stimuli‐responsive ABC triblock copolymers by sequential living cationic copolymerization: Multistage self‐assemblies through micellization to open association

Stimuli‐responsive ABC triblock copolymers with three segments with different phase‐separation temperatures were synthesized via sequential living cationic copolymerization. The triblock copolymers exhibited sensitive thermally induced physical gelation (open association) through the formation of micelles. For example, an aqueous solution of EOVE₂₀₀‐b‐MOVE₂₀₀‐b‐EOEOVE₂₀₀ [where EOVE is 2‐ethoxyethyl vinyl ether, MOVE is 2‐methoxethyl vinyl ether and EOEOVE is 2‐(2‐ethoxy)ethoxyethyl vinyl ether; the order of the phase‐separation temperatures was poly(EOVE) (20 °C) < poly(EOEOVE) (41 °C) < poly(MOVE) (70 °C)] underwent multiple reversible transitions from sol (<20 °C) to micellization (20–41 °C) to physical gelation (physical crosslinking, 41–64 °C) and, finally, to precipitation (>64 °C). At 41–64 °C, the physical gel became stiffer than similar diblock or ABA triblock copolymers of the same molecular weight. Furthermore, the ABC triblock copolymers exhibited Weissenberg effects in semidilute aqueous solutions. In sharp contrast, another ABC triblock copolymer with a different arrangement, EOVE₂₀₀‐b‐EOEOVE₂₀₀‐b‐MOVE₂₀₀, scarcely exhibited any increase in viscosity above 41 °C. The temperatures of micelle formation and physical gelation corresponded to the phase‐separation temperatures of the segment types in the ABC triblock copolymer. No second‐stage association was observed for AB and ABA block copolymers with the same thermosensitive segments found in their ABC counterparts. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2601–2611, 2004     

Organic–inorganic hybrid membranes prepared from the sol–gel process of poly(butyleneadipate‐co‐terephthalate) and TiO2

Organic–inorganic hybrids based on poly(butyleneadipate‐co‐terephthalate)/titanium dioxide (PBAT/TiO₂) hybrid membranes were prepared via a sol–gel process. The PBAT/TiO₂ hybrid membranes were prepared for various PBAT/TiO₂ ratios. The resulting hybrids were characterized with a morphological structure, hydrophilicity, biodegradability, and thermal properties. The results showed that macrovoids underwent a transition into a sponge‐like membrane structure with the addition of TiO₂. After sol–gel transition, a strong interaction between the inorganic network and polymeric chains led to an increase in glass transition temperature (T_g), thermal degrading temperature, and hydrophilicity, and hence a higher biodegradability. According to X‐ray diffraction measurements of the crystal structure of the hybrid, the presence of TiO₂ did not change the crystal structure of PBAT. TiO₂ networks are uniformly dispersed into the PBAT matrix and no aggregation of TiO₂ networks in the hybrid membranes was observed through the small angle X‐ray scattering measurements. Thus, the sol–gel process of PBAT and TiO₂ can be used to prepare a hybrid with higher application temperature and faster biodegradation rate. Copyright © 2008 John Wiley & Sons, Ltd.     

Stable second‐order nonlinear optical poly(amide–imide)/inorganic materials via simultaneous sequential self‐repetitive reaction and sol–gel process

A series of thermally stable organic/inorganic second‐order nonlinear optical (NLO) composites via sequential self‐repetitive reaction (SSRR) and sol–gel process has been developed. This SSRR is based on carbodiimide (CDI) chemistry. The difunctional azo chromophores (2,4‐diamino‐4′‐(4‐ nitrophenyl‐diazenyl)azobenzene (DNDA)) was reacted with excessive amount of 4, 4′‐methylene‐ diphenylisocyanate (MDI) to form poly‐CDI, and subsequently trimellitic anhydride (TMA) was added to obtain poly(N‐acylurea). The organic/inorganic composites containing prepolymer of phenyltriethoxysilane (PTEOS) and poly(N‐acylurea) in different weight ratios (10:90, 30:70, 50:50, 70:30, 90:10 wt%) were prepared, respectively. The moderate glass transition temperature (T_g) characteristic of the poly(N‐acylurea) allows the NLO‐active polymer to achieve high poling efficiency. After in situ poling and curing process, the T_gs of the composites were elevated, and higher than that of the pristine poly(amide–imide) sample. Electro‐optical (EO) coefficients (r₃₃) of about 5.5 ～ 18.0 pm/V at 830 nm were obtained. Excellent temporal stability at 100°C, and waveguide characteristics (3.1–4.2 dB/cm at 830 nm) were also obtained for these composites. Copyright © 2008 John Wiley & Sons, Ltd.     

SET‐LRP of acrylonitrile catalyzed by tin powder

Sn(0)‐mediated single electron transfer‐living radical polymerization (SET‐LRP) of acrylonitrile (AN) with carbon tetrachloride (CCl₄) as initiator and hexamethylenetetramine (HMTA) as ligand in N, N‐dimethylformamide (DMF) was studied. The polymerization obeyed first order kinetic. The molecular weight of polyacrylonitrile (PAN) increased linearly with monomer conversion and PAN exhibited narrow molecular weight distributions. Increasing the content of Sn(0) resulted in an increase in the molecular weight and the molecular weight distribution. Effects of ligand and initiator were also investigated. The block copolymer PAN‐b‐polymethyl methacrylate with molecular weight at 126,130 and polydispersity at 1.36 was successfully obtained. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

A bidirectional ATRP‐NMRP initiator: The effect of nitroxide size on the rate of nitroxide‐mediated polymerization

An N‐alkoxyamine macroinitiator bearing a polymeric nitroxide cap was synthesized and used to investigate the effect of nitroxide size on the rate of nitroxide‐mediated radical polymerization (NMRP). This macroinitiator was prepared from asymmetric double‐headed initiator 9 , which contains both an α‐bromoester and an N‐alkoxyamine functionality. Poly(methyl methacrylate) was grown by atom transfer radical polymerization from the α‐bromoester end of this initiator, resulting in a macroinitiator (M_n = 31,000; PDI = 1.34) bearing a nitroxide cap permanently attached to a polymer chain. The polymerization kinetics of this macroinitiator in NMRP were compared with known N‐alkoxyamine initiator 1 . It was found that the rate of polymerization was unaffected by the size of the macromolecular nitroxide cap. It was confirmed that NMRP using this macroinitiator is a “living” process. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2015–2025, 2007     

Organic sol–gel synthesis of microporous molecular networks containing spirobifluorene and tetraphenylmethane nodes

The microporous molecular networks based on rigid tetrafunctional units are synthesized via organic sol–gel polymerization of 2,2′,7,7′‐tetraamino‐9,9′‐spirobifluorene (TASBF) and/or tetrakis(4‐aminophenyl)methane (TAPM) with a diisocyanate, hexamethylene diisocyanate (HDI), or p‐phenylene diisocyanate. This study is performed as an extension of our previous report on the first organic sol–gel method, which enabled the synthesis of microporous molecular networks via a two‐stage mechanism involving the formation of colloidal dispersions of the nanoparticulate molecular networks and their subsequent growth to monolithic networks on solvent evaporation. The sol–gel‐synthesized molecular networks obtained by incorporating TASBF as a network former show improved porosity, processability, and thermal stability than the TAPM‐based system. The improved porosity of TASBF‐based networks is attributed to higher rigidity of the spirobifluorene compared with the tetraphenylmethane units. We also demonstrate the synthesis of mixed organic molecular networks by sol–gel copolymerization of the two network formers, TASBF and TAPM, and a diisocyanate monomer. The sol–gel transformation of TASBF/TAPM/HDI occurred at longer reaction times with increasing the amount of TASBF in the TASBF/TAPM/HDI mixture. The results indicate that the organic sol–gel method can be further optimized by adjusting various synthesis parameters to create new functional organic molecular network materials. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Temperature‐induced spontaneous sol–gel transitions of poly(D,L‐lactic acid‐co‐glycolic acid)‐b‐poly(ethylene glycol)‐b‐poly(D,L‐lactic acid‐co‐glycolic acid) triblock copolymers and their end‐capped derivatives in water

The spontaneous hydrogel formation of a sort of biocompatible and biodegradable amphiphilic block copolymer in water was observed, and the underlying gelling mechanism was assumed. A series of ABA‐type triblock copolymers [poly(D,L ‐lactic acid‐co‐glycolic acid)‐b‐poly(ethylene glycol)‐b‐poly(D,L ‐lactic acid‐co‐glycolic acid)] and different derivatives end‐capped by small alkyl groups were synthesized, and the aqueous phase behaviors of these samples were studied. The virgin triblock copolymers and most of the derivatives exhibited a temperature‐dependent reversible sol–gel transition in water. Both the poly(D,L ‐lactic acid‐co‐glycolic acid) length and end group were found to significantly tune the gel windows in the phase diagrams, but with different behaviors. The critical micelle concentrations were much lower than the associated critical gel concentrations, and an intact micellar structure remained after gelation. A combination of various measurement techniques confirmed that the sol–gel transition with an increase in the temperature was induced not simply via the self‐assembly of amphiphilic polymer chains but also via the further hydrophobic aggregation of micelles resulting in a micelle network due to a large‐scale self‐assembly. The coarsening of the micelle network was further suggested to account for the transition from a transparent gel to an opaque gel. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1122–1133, 2007     

Concentration controlled multilevel self‐assembly of 3‐armed poly(ethylene glycol)‐b‐poly(ε‐caprolactone) block copolymers investigated by AFM

Concentration dependent morphology of 3‐armed poly(ethylene glycol)‐b‐poly(ε‐caprolactone) copolymer aggregates in aqueous system was investigated by atomic force microscopy (AFM). The AFM results show that, at a low concentration, 4 × 10^?5 g/mL, spherical micelles occur, and unmicellized molecules are not distributed homogeneously in the copolymer aqueous solution. Unequal outspread clusters composed of wormlike aggregates are formed at a moderate copolymer concentration, 4 × 10^?4 g/mL, those wormlike aggregates are orderly packed in the clusters. At a high concentration of 0.05 g/mL, the copolymer aqueous system is indeed a gel at room temperature, outspread clusters of wormlike aggregates join together to forma network structure. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1412–1418, 2008     

One‐pot synthesis of conjugated poly(3‐hexylthiophene)‐b‐poly(phenyl isocyanide) hybrid rod–rod block copolymers and its self‐assembling properties

In this article, the synthesis of a series of conjugated rod–rod block copolymers based on poly(3‐hexylthiophene) (P3HT) and poly(phenyl isocyanide) (PPI) building blocks in a single pot is presented. Ni‐catalyzed Grignard metathesis polymerization of 2,5‐dibromo‐3‐hexylthiophene and subsequent addition of 4‐isocyanobenzoyl‐2‐aminoisobutyric acid decyl ester in the presence of Ni(dppp)Cl₂ as a single catalyst afford P3HT‐b‐PPI with tunable molecular weights and compositions. In solid state, microphase separation occurred as differential scanning calorimetric analysis of P3HT‐b‐PPI revealed two glass transition temperatures. In solutions, the copolymers can self‐assemble into spherical aggregates with P3HT core and PPI shell in tetrahydrofuran and exhibit amorphous state in CHCl₃. However, atomic force microscopy revealed that the block copolymers self‐assemble into nanofibrils on the substrate. These unique features warrant the resultant conjugated rod–rod copolymers' potential study in organic photovoltaic and other electronic devices. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2939–2947