Two—dimensional Network Crown Ether Complex.Synthesis and Crystal Structure of 18—Crown—6 Complex：[K（18—C—6）]2[Cd—（nmt）2]

The novel complex [K(18-C-6)]2[Cd(mnt)2][18-C-6-18-crown-6,nmt=1,2-dicyanoethene-1,2-dithiolate,C2S2-(CN)2^2-] was synthesized and characterized by elemental analysis,IR spectrum and X-ray diffraction analysis.The complex displays two-dimensional network structure of [K(18-C-6)] complex segments and [Cd(nmt)2] complex segment bridged by S-K-S,S-K-N and N-K-N interactions between adjacent[K(18-C-6)] and [Cd(mnt)2]units.     

Die Molekül‐ und Kristallstruktur des Rubidium(Dibenzo‐18‐Krone‐6)‐pentaiodids [Rb(C20H24O6)]I5

Molecular and Crystal Structure of Rubidium(dibenzo‐18‐crown‐6)pentaiodide [Rb(C₂₀H₂₄O₆)]I₅ [Rb(Dibenzo‐18‐crown‐6)]₂(I₅)₂ is obtained as dark brown columns by reacting dibenzo‐18‐crown‐6, rubidium iodide, and iodine in a molar ratio of 1 : 1 : 6 in ethanole / dichlormethane (1:1). [Rb(C₂₀H₂₄O₆)]₂(I₅)₂ crystallizes with four formula units per unit cell in the orthorhombic space group Pnma with a = 1725.15(2) pm, b = 1863.76(3) pm and c = 1885.19(3) pm. The crystal structure consists of pentaiodide units I₅^—, which are linked to one another by head‐to‐tail‐contacts. The I₂ units, which stick out of the chain, are twisted against each other, in a way that neither a cis or a trans configuration is formed. By secondary bonding, the iodine atoms form nets of 18‐member planar rings with an almost rectangular form. This net‐like structural element has not been described up to now.     

Complexation of Syndiotactic Polystyrene with 12‐Crown‐4

Solid‐state complexation of syndiotactic polystyrene (sPS) with a crown ether compound, 1,4,7,10‐tetraoxa‐cyclododecane (12‐crown‐4), took place when a film of sPS/chloroform clathrate was subjected to a guest exchange procedure assisted with a plasticizing agent. The new guest 12‐crown‐4 molecules were incorporated into the crystalline region of the sPS film, without causing a large conformational change of host sPS helices. X‐ray diffraction and thermogravimetric investigations showed that sPS/12‐crown‐4 complex had a clathrate complex structure which contained four 12‐crown‐4 molecules per unit cell. IR and Raman data suggested that 12‐crown‐4 took a C_i‐type conformation in the sPS complex phase.

     

Preparation and Application of Cholesteryl‐Benzo‐15‐Crown‐5/Cholesteryl Mixed Liquid Crystals

Various mixed liquid crystals containing crown ether‐cholesteryl liquid crystal, benzo‐15‐crown‐5‐COO‐C₂₇H₄₅ (B15C5‐COOCh), with various common cholesteric liquid crystals, e.g., cholesteryl chloride, cholesteryl benzoate and cholesteryl palmitate, were prepared and studied using polarizing microscopy and differential scanning calorimetry. Investigating the concentration effect of B15C5‐COOCh in mixed liquid crystals revealed that the addition of B15C5‐COOCh resulted in wider phase transition temperature ranges of these cholesteryl liquid crystals. The stability of these B15C5‐COOCh/cholesteryl mixed liquid crystals was studied using comprehensive graphic molecular modeling computer programs (Insight II and Discover) to calculate their molecular energy and stability energy. The effect of salts, e.g. Na⁺, Co³⁺, Y³⁺ and La³⁺, on the transition temperature range of the mixed liquid crystals was also investigated. The crown ether cholesteric liquid crystal B15C5‐COOCh was applied both as a surfactant and an ion transport carrier to transport metal ions through liquid membranes. Cholesteryl benzo‐15‐crown‐5 exhibited distinctive characteristics of a surfactant and the critical micellar concentration (CMC) of the surfactant was investigated by the pyrene fluorescence probe method. Cholesteryl benzo‐15‐crown‐5 was successfully applied as a good ion transport carrier (Ionophore) to transport various metal ions, e.g. Li⁺, Na⁺, La³⁺, Fe³⁺ and Co³⁺, through organic liquid membranes. The transport ability of the cholesteryl benzo‐15‐crown‐5 surfactant for these metal ions was in the order: Co³⁺ ≥ Li⁺ > Fe³⁺ > Na⁺ > La³⁺.     

ACE applied to the quantitative characterization of benzo‐18‐crown‐6‐ether binding with alkali metal ions in a methanol–water solvent system

ACE was applied to the quantitative evaluation of noncovalent binding interactions between benzo‐18‐crown‐6‐ether (B18C6) and several alkali metal ions, Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺, in a mixed binary solvent system, methanol–water (50/50 v/v). The apparent binding (stability) constants (K_b) of B18C6–alkali metal ion complexes in the hydro‐organic medium above were determined from the dependence of the effective electrophoretic mobility of B18C6 on the concentration of alkali metal ions in the BGE using a nonlinear regression analysis. Before regression analysis, the mobilities measured by ACE at ambient temperature and variable ionic strength of the BGE were corrected by a new procedure to the reference temperature, 25°C, and the constant ionic strength, 10 mM . In the 50% v/v methanol–water solvent system, like in pure methanol, B18C6 formed the strongest complex with potassium ion (log K_b=2.89±0.17), the weakest complex with cesium ion (log K_b=2.04±0.20), and no complexation was observed between B18C6 and the lithium ion. In the mixed methanol–water solvent system, the binding constants of the complexes above were found to be about two orders lower than in methanol and about one order higher than in water.     

Ion‐Pair Complexation with Dibenzo[21]Crown‐7 and Dibenzo[24]Crown‐8 bis‐Urea Receptors

Synthesis and ion‐pair complexation properties of novel ditopic bis‐urea receptors based on dibenzo[21]crown‐7 ( R¹ ) and dibenzo[24]crown‐8 ( R² ) scaffolds have been studied in the solid state, solution, and gas phase. In a 4:1 CDCl₃/[D₆]DMSO solution, both receptors clearly show positive heterotropic cooperativity toward halide anions when complexed with Rb⁺ or Cs⁺, with the halide affinity increasing in order I^?<Br^?<Cl^?. In solution, the rubidium complexes of both receptors have higher halide affinities compared to the caesium complexes. However, Rb⁺ and Cs⁺ complexes of R² show stronger affinities toward all the studied anions compared to the corresponding cationic complexes of R¹ . Similar selectivity of the receptors toward the studied ion pairs was also observed also in the gas phase by competition experiments with mass spectrometry. A total of eight crystal structures with different rubidium and caesium halides and oxyanions were obtained in addition to the crystal structure of R²?BaCl₂ . The selectivity observed in solution and in the gas phase is explainable by the conformational differences observed in the crystal structures of ion‐pair complexes with R¹ and R² . In the solid state, R¹ has an open conformation due to the asymmetric crown‐ether scaffold, whereas R² has a compact, folded conformation. Computational studies of the ion‐pair complexes of R² show that the interaction energies of the complexes increase in the order CsI<CsBr<CsCl<RbCl, supporting the selectivity observed in solution and the gas‐phase.     

Isolated Triiodide and Pentaiodide Anions in the Crystal Structure of [Rb(Dibenzopyridino‐18‐Crown‐6)2]2(I3)(I5)

Red shiny crystals of [Rb(dibenzopyridino‐18‐crown‐6)₂]₂(I₃)(I₅) were obtained from a dichloromethane/ethanol solution of RbI, I₂ and dibenzopyridino‐18‐crown‐6. Triclinic, , a = 1494.3(1), b = 1534.1(1), c = 2412.9(2) pm, α = 76.95(1), β = 83.58(1), γ = 68.67(1)°, V = 5016.7(7) 10⁶·pm³, Z = 2. The crystal structure consists of [Rb(dbp18c6)₂]⁺ cations leaving suitable three‐dimensional channels for the linear I₃⁻ and V‐shaped I₅⁻ anions which are isolated from each other.     

Solid‐State Binding Studies of Group 2 Metal Ions with 12‐Crown‐4

The mode of co‐ordination of 12‐crown‐4 with the heavier group(II) ions Ca²⁺, Sr²⁺ and Ba²⁺ has been studied. Size limitations of the 12‐crown‐4 ligand enforced co‐ordinated metal ions to reside above the macrocyclic plane, with the remaining co‐ordination sphere occupied by water molecules and/or counter anions, or a second crown ether ligand to form a sandwich type species. Variation of the anion, by virtue of its co‐ordinating ability, affects the structural outcome.     

Synthesis and Characterization of a Novel Thermo‐Sensitive Copolymer of N‐Isopropylacrylamide and Dibenzo‐18‐crown‐6‐diacrylamide

Summary: A series of novel, thermo‐sensitive copolymers with different molar ratios of N‐isopropylacrylamide (NIPAM) and hydrophobic cis‐dibenzo‐18‐crown‐6‐diacrylamide (cis‐DBCAm) were prepared via free‐radical copolymerization. cis‐DBCAm with polymerizable end groups was successfully synthesized by reacting the corresponding amino crown ether with acryloyl chloride. The copolymers were characterized by FT‐IR and elemental analysis, and the thermo‐sensitivities of the copolymers were evaluated by measuring their lower critical solution temperatures (LCSTs) in the absence or presence of various metal ions. The results indicated that incorporation of cis‐DBCAm lowered LCSTs, and that the LCSTs of the copolymers decreased with the increase in cis‐DBCAm content in the copolymers. When the cavities of the crown ether units captured either K⁺ or Cs⁺ ions, the LCST of the respective copolymer–metal ion complex was further decreased, whereas the capture of Na⁺ or Li⁺ ions did not have a significant influence on the LCSTs of the copolymers.

Incorporation of cis‐DBCAm into PNIPAM resulted in a lower LCST. The LCST was decreased more when the cavities of the crown ether units captured K⁺ ions.     

An Isomer Specific,Highly Selective Fluorescent Chemosensor for K+ from a Bis‐Naphtho‐15‐Crown‐5 Derivative

Three isomeric series of bis(crown ether)s have been synthesized by condensation of the appropriate formylnaphthocrown with 1,4‐phenylenediacetonitrile. The interaction of these ligands with K⁺ and Na⁺ has been investigated by UV and fluorescence spectroscopic techniques. Among them the bis(crown ether) 2a exhibits excellent K⁺‐selectivity over Na⁺ and a dramatic increase in the fluorescence intensity of chromophores.     

NMR and theoretical study of the cooperative interaction of hydrated proton with dibenzo-24-crown-8

Interaction of hydrated protons (HPs) with dibenzo-24-crown-8 (DBC in nitrobenzene-d(5) was studied by (1)H and (13)C NMR under assistance of ab initio-density functional theory (DFT) quantum calculations. HPs were afforded by hydrogen bis(1,2-dicarbollyl) cobaltate (HDCC) with 3.5 M excess of H(2)O. The forming of a complex between HP and DBC leads to marked and additive relative shifts of both (1)H and (13)C signals. This was utilized for the estimation of the stabilization constant K of the complex. Its value is at least 10(6) l/mol, which agrees with the result of independent extraction method (log K = 6.3). Using absolute integral intensities of the HP signal in a water-saturated system, it was shown that the form of HP present in the complex must be H(5)O(2)(+), in accord with formerly published structure of the complex in crystalline form. The investigation of the dynamics of exchange between bound and free DBC by transverse relaxation using variably spaced pulses in the Carr-Purcell-Meiboom-Gill (CPMG) sequence or on-resonance rotating-frame relaxation with variable spin-lock field intensity was partly hampered by the fast relaxation of some signals in the complex because of relative immobilization of its internal motions. In order to remove these effects, a pulse sequence dipolar interaction-free transverse relaxation (DIFTRE) for static DIFTRE was devised and the MLEV17 pulse sequence with high intensity of electromagnetic field was used in a separate series of experiments. Using the results of these latter experiments, the correlation time of exchange was established to be about 0.8 ms, which complied with the shape of the spectra. The accompanying ab initio DFT calculations showed that the apparent symmetry of the molecules of both DBC and its complex with H(5)O(2)(+) was probably the result of averaging of energetically close conformations (five for DBC and four for the complex). Both NMR and the calculations show that the basic mode of binding of the ion in the complex is analogous to that found in crystal but the most pronounced conformation is slightly different.     

Synthesis and Antimicrobial Evaluation of Novel Dibenzo‐18‐Crown‐6‐Ether Functionalized Pyrimidines

A practical, two‐step synthesis of crown ether functionalized pyrimidines has been developed. The reaction conditions have been optimized, and the protocol is generalized for series of substrates. These newly synthesized compounds exhibited antimicrobial activity against bacterial strains Staphylcoccus aureus (Gram‐positive) and Escherichia coli (Gram‐negative). These compounds were also found to be potent antifungal agents Aspergillus niger and Candida albicans strains, respectively.     

1,10‐Diaza‐18‐crown‐ether,Modified by Phosphonate Pendant Arms – Synthesis,Structure, and Picrate Extraction Properties

Reaction of O,O′‐diisopropyl‐3‐methyl‐1,2‐butadienylphosphonate with 1,10‐diaza‐18‐crown‐6 in the presence of a catalytic amount of iPrONa leads to the new crown‐ether derivative, containing phosphonate pendant arms ( L ). The structure of the compound obtained was investigated by single crystal X‐ray diffraction analysis, IR, ¹H and ³¹P{¹H} NMR spectroscopy, and microanalysis. In the crystal structure the side arms of L are in an anti disposition relative to the macrocyclic cavity. It was established that phosphorylation of 1,10‐diaza‐18‐crown‐6 by allenylphosphonate results in an increase of extraction of NaPic and KPic, whereas LiPic and NH₄Pic are extracted practically in the same level.     

Synthesis and Optical Properties of 2,13‐Dibenzothiazol‐2′‐yldibenzo[b,k]‐18‐crown‐6

A new crown ether of 2,13‐dibenzothiazol‐2′‐yldibenzo[b,k]‐18‐crown‐6 was synthesized from 2,13‐diformyl‐ dibenzo[b,k]‐18‐crown‐6 with 2‐aminothiophenol. The binding behavior and the optical properties of the crown ether were examined through UV‐visible spectroscopy and fluorescence spectroscopy. When complexed with Na⁺, K⁺, Rb⁺ and Cs⁺ ions, it led to intramolecular charge transfer and caused the changes of the fluorescence spectra. The protonation of the crown ether was also studied.     

Di‐Benzo‐18‐Crown‐6 and its Derivatives as Ligands in the Search for Ion Channels

Based on the previously reported one‐dimensional channel system [(H₂O)?(DB18C6)(μ₂‐H₂O)_2/2][(H₃O)?(DB18C6)(μ₂‐H₂O)_2/2]I₃ ( 2 ), which is realized by stacking of crown ether molecules (DB18C6 = dibenzo‐18‐crown‐6), other synthetic approaches towards ionic channels and their results are presented in this paper. The “cutting out” approach using DB18C6 as scissor, applied on NaI, yields the compound [Na?(DB18C6)I(THF)][Na?(DB18C6)(H₂O)₂]I(THF)₂(CHI₃) ( 1 ), in high yield. It is based on a neutral and a cationic complex of sodium by DB18C6 linked via H‐bonding to give short chain fragments. The anion exchange approach, trying to replace I₃^? by Br₃^? leads to the intercalation of a cation into a DB18C6 chain in [(Me₃NPh)(DB18C6)]Br₃ ( 3 ). A similar reaction as for the synthesis of 2 , but replacing iodide with bromine, yields finally a brominated DB18C6 ligand. In the presence of iron, the compound [(H₅O₂)?(Br₄‐DB18C6)₂][FeBr₄], 4 , is observed, in which a H₅O₂⁺‐cation is encapsuled by two brominated crown ether molecules. The absence of Fe and an excess of Br₂ leads to the complexation of H₃O⁺, and co‐crystallisation of bromine in [(H₃O)?(Br₄‐DB18C6)]Br₃Br₂ ( 5 ).     

Synthesis of novel ion‐imprinted polymeric nanoparticles based on dibenzo‐21‐crown‐7 for the selective pre‐concentration and recognition of rubidium ions

In this work, we report the first application of ion‐imprinted technology via precipitation polymerization for simple and practical determination of rubidium ions. The rubidium‐ion‐imprinted polymer nanoparticles were prepared using dibenzo‐21‐crown‐7 as a selective ligand, methacrylic acid as functional monomer, ethylene glycol dimethacrylate as cross linker, and 2,2′‐azobisisobutyronitrile as radical initiator. The resulting powder material was characterized using scanning electron microscopy, which showed colloidal nanoparticles of 100–200 nm in diameter and slightly irregular in shape. The maximum adsorption capacity of the ion imprinted particles was 63.36 μmol/g. The experimental conditions such as nature and concentration of eluent, pH, adsorption and desorption times, weight of the polymer material, aqueous phase and desorption agent volumes were also studied. Finally, selectivity of the prepared IIP particles toward rubidium ion was investigated in the presence of some foreign metal ions.     

Electrochemical Behavior of a Crown Type Polyether: 2,5,8‐Trioxa‐16,20‐Diazatricyclo[20.4.0.09,14]‐Hexacosa‐9,11,13,15,20,22,24,26‐Octaene

In this work, electrochemical behaviors of 2,5,8‐trioxa‐16,20‐diazatricyclo[20.4.0.0^9,14]‐hexacosa‐9,11,13,15,20,22,24,26‐octaene (TPO) was investigated and mechanistic study was achieved in 0.1 M tetrabutylammonium tetrafluoroborate (TBATFB) in acetonitrile on glassy carbon (GC) working electrode by cyclic voltammetry, chronoamperometry and chronocoulometry. It was estimated by ultra microelectrode (UME) that this molecule is reduced by four‐electron transfer. The reduction product adsorbed on the electrode surface, characterized by Raman spectroscopy, is a dimer. It was determined by using cyclic voltammetry that TPO is electroreduced by EC mechanism. Using digital simulation studies, EC mechanism was also indicated and the standard rate constant of the reduction step was calculated as well as the rate constants of the homogenous reaction.     

卟啉修饰冠醚环的合成、性能及其自组装应用

采用金属离子为模板合成了-类由无金属或金属卟啉修饰的冠醚大分子环,并通过1HNMR、MS、紫外、荧光等方法对其进行了结构表征和性能测试.采用具有4,4,-联吡啶的客体分子与冠醚环进行组装,以荧光滴定法测定了主客体分子问的结合常数.结果表明,这种冠醚环不仅具有卟啉优异的光电性质而且能与客体分子形成了1:1的类轮烷体系.     

二氧化硅固载硫、氮杂冠醚铂配合物的合成及其催化烯烃硅氢化性能

二(β-氯乙基)烯丙胺与3,6-二氧杂辛-1,8-二硫醇在乙醇钠存在下关环缩合,得到具有烯基侧链的1,7-二硫杂-10,13-二氧杂-4-氮杂-4-烯丙基环十五烷.后者通过硅氢加成、二氧化硅固载.再与氯亚铂酸钾反应,合成了一种新型有机硅聚合物负载硫、氮杂冠醚及其铂配合物.该配合物对于烯烃硅氢加成反应具有良好的催化性能.     

Preparation of 8‐Aza‐7‐deazaaristeromycin and ‐neplanocin A and Their 5′‐Homologs

The synthesis of new members of the aristeromycin and neplaoncin A families of carbocyclic nucleosides possessing the 1H‐pyrazolo[3,4‐d]pyrimidine ring is reported. For this purpose, an adapted route to 4‐amino‐1H‐pyrazolo[3,4‐d]pyrimidine is described.