Structure and Magnetic Properties of Two Lanthanide 1,4‐Phenylenediacetate Compounds

The reactions of Ln(NO₃)₃ with 1,4‐phenylenediacetic acid (H₂PDA) under hydrothermal conditions produced two isostructural lanthanide coordination polymers with the empirical formula [Ln₂(PDA)₃(H₂O)] · 2H₂O [Ln = Nd ( 1 ), Sm ( 2 )]. Single‐crystal X‐ray diffraction analyses revealed that both contain one‐dimensionalmetal carboxylato chains, which are further connected by the–CH₂C₆H₄CH₂– spacers of PDA^2– ligands to yield a three‐dimensional metal‐organic framework. Magnetic susceptibilities of 1 and 2 were measured. The experimental χ_mT value of both compounds decreases continuously with decreasing temperature over the whole temperature range. The best least‐squares fit of the experimental data of 1 to a theoretical equation in the temperature range of 70–300 K gives the zero‐field splitting parameter Δ = 2.21 cm^–1 and the magnetic interaction between the Nd^III ions 2zJ′ = –1.97 cm^–1, which indicates the presence of antiferromagnetic interaction between the Nd^III ions. The experimental χ_mT value of 2 at 2 K is much smaller than the expected value for two free Sm^III ions (⁶H_5/2, g = 2/7) in the ground state, indicating that an antiferromagnetic interaction possibly exists between Sm^III ions at low temperature. Fitting the magnetic data of 2 above 110 K based on an equation deduced from the Sm^III ion in a monomeric system with free‐ion approximation gave a spin‐orbit coupling parameter λ = 192(2) cm^–1     

A New Inorganic‐Organic Hybrid with Zinc Phosphate Layers Pillared by the 4, 4'‐Bipyridine Units

A new inorganic‐organic hybrid zinc phosphate with the formula Zn₂(4, 4'‐bipy)(HPO₄)₂ (4, 4'‐bipy = 4, 4'‐bipyridine) has been synthesized under hydrothermal conditions and characterized by single‐crystal X‐ray diffraction, FTIR, ICP analysis, elemental analysis, SEM, powder X‐ray diffraction, thermogravimetric analysis and its fluorescent spectrum. The compound crystallizes in the monoclinic system, space group P2₁/c (No.14), a = 10.4479(7), b = 8.1694(5), c = 8.9643(5) Å, β = 97.907(2), V = 757.86(8) ų, Z = 2. The structure consists of ZnO₃N and HPO₄ tetrahedra by corner‐sharing to generate neutral 4.8²‐net sheets, which are pillared through 4, 4'‐bipy ligands to form a 3‐D hybrid framework.     

Hydrothermal Synthesis and X‐ray Crystal Structure of Four Inorganic‐Organic Hybrid Compounds in Vanadium /Copper Iodate Family

Four inorganic‐organic hybrid compounds with the formulae (1,10‐phen)(VO₂)(IO₃) ( 1 ), (2,2′‐bipy)(VO₂)(IO₃) ( 2 ), [Cu₃(2,2′‐bipy)₃Cl₃(IO₃)₂]·I_1.5 ( 3 ), and [Cu(2,2′‐bipy)(H₂O)(IO₃)₂]· (H₂O)₂ ( 4 ) are hydrothermally synthesized at 120 °C for 6 d and characterized by single‐crystal X‐ray diffraction. The use of two different bidentate organodiamine ligands 1,10‐phen and 2,2′‐bipy in the V/I/O system gives rise to compounds 1 and 2 , which crystallize in a monoclinic system with the space group C2/c, a = 17.8131(6) Å, b = 15.0470(7) Å, c = 12.9902(4) Å, β = 133.095(2)°, V = 2542.49(17) ų for 1 and space group P2₁/c, a = 13.3095(5) Å, b = 15.0993(8) Å, c = 13.0454(4) Å, β = 116.971(2)°, V = 2335.88(17) ų for 2 . The use of the bidentate organodiamine ligand 2,2′‐bipy in the Cu/I/O system gives rise to the variety in the structure of products 3 and 4 , which crystallize in a triclinic system with the same space group . a = 8.5143(2) Å, b = 10.4908(3) Å, c = 22.8420(6) Å, α = 93.769(10)°, β = 91.723(10)°, γ = 112.111(10)°, V = 1882.83(9) ų for 3 and a = 6.731(6) Å, b = 10.110(4) Å, c = 12.899(6) Å, α = 106.00(5)°, β = 95.45(4)°, γ = 107.69(6)°, V = 788.4(9) ų for 4 . The solid‐state structures of the compounds 1 and 2 have chains with repeat units of alternative corner sharing of [VO₄N₂] octahedra and [IO₃] pyramids. Compound 3 is a chain containing [IO₃] pyramids and [VO₄N] square pyramids and compound 4 consists of Cu(2,2′‐bipy)²⁺ linked by one water molecule and two [IO₃] pyramids. The thermal stabilities of the compounds are investigated.     

Syntheses,Crystal Structures and Luminescent Properties of Three Inorganic‐Organic Hybrid Frameworks Constructed from 4,5‐Imidazoledicarboxylate

Three inorganic‐organic hybrid frameworks [Mn(HIMDC)(4,4′‐bipyo)_0.5(H₂O)]_n (1) , [Cd(H₂IMDC)₂(2,2′‐bipyo)] (2) and [Ca(HIMDC)(H₂O)₂·H₂O]_n (3) (H₃IMDC = 4,5‐imidazoledicarboxylate; 4,4′‐bipyo = 4,4′‐bipyridine‐N,N′‐dioxide; 2,2′‐bipyo= 2,2′‐bipyridine‐N,N′‐dioxide) have been hydrothermally synthesized and characterized by the elemental analyses, IR spectra, TG analysis and the single crystal diffraction. Both compounds 1 and 3 exhibit 2D layers while 2 is a monomer. It is noteworthy that compound 2 exhibits strong fluorescent emission in the solid state at room temperature.     

Two Hybrid Compounds Constructed from Vanadate Clusters and Secondary Metal‐Bis(imidazole) Subunits

Two new inorganic–organic vanadate hybrid compounds [Mn(Hbbi)₂(V₄O₁₂)] ( 1 ) and [Cd(Hbbi)₂(V₄O₁₂)] ( 2 ) (bbi = 1,1’‐(1,4‐butanediyl)bis(imidazole)) were hydrothermally synthesized and characterized by elemental analyses, IR spectroscopy, TG and single‐crystal X‐ray diffraction. The two compounds crystallize in monoclinic system, P2₁/c space group with a = 8.556(5) Å, b = 10.761(5) Å, c = 16.917(5) Å, β = 93.032(5) ^o, V = 1555.4(12) Å³, Z = 2, R = 0.0390 for 1 and a = 8.657(5) Å, b = 10.743 (5) Å, c = 16.864 (5) Å, β = 93.81(5)^o, V = 1564.9 (12) Å³, Z = 2, R = 0.0717 for 2 . Single‐crystal X‐ray diffraction analysis reveals that the two compounds are isostructural and both consist of one‐dimensional (1D) chains, which are constructed from vanadate anion clusters and [M(Hbbi)₂]⁴⁺ cation groups [M = Mn^II ( 1 ), Cd^II ( 2 )]. Moreover, the polymeric chains are ultimately packed into a three‐dimensional (3D) supramolecular framework through C–H ··· O and N–H ··· O hydrogen bonding interactions.     

1D Polyoxometalate‐based Inorganic‐Organic Hybrid Derived from ß‐Octamolybdate — Synthesis and Crystal Structure of [CoII(2, 2′‐bipy)2]2[Mo8O26]

A polyoxometalate‐based inorganic–organic hybrid compound [Co^II(2, 2′‐bpy)₂]₂[Mo₈O₂₆] ( 1 ) was synthesized by hydrothermal methods and structurally characterized by IR spectrum, TG analysis and X‐ray diffraction. The compound crystallizes in the monoclinic system, space group P2₁/n, a = 10.0681(2), b = 16.4467(2), c = 15.7838(3) Å, β = 100.046(1)°, V = 2573.52(8) ų, Z = 2. The structure of 1 is built up from β‐[Mo₈O₂₆]^4? subunits covalently linked via [Co^II(2, 2′‐bpy)₂]²⁺ fragments into a infinite 1D {[Co^II(2, 2′‐bpy)₂]₂[Mo₈O₂₆]}_∞ polymer.     

Construction and Properties of Two MOFs Based on 2‐p‐Bromophenyl Imidazole Dicarboxylate

To further explore the coordination ability of an multi‐functional ligand 2‐(p‐bromophenyl)‐1H‐imidazole‐4,5‐dicarboxylic acid (p‐BrPhH₃IDC), two metal‐organic frameworks [Mn(μ₂‐p‐BrPhH₂IDC)₂]_n ( I ) and {[Pb(μ₂‐p‐BrPhH₂IDC)₂] · H₂O}_n ( II ) were synthesized under hydro(solvo)thermal conditions and structurally characterized by elemental analyses, IR spectroscsopy, and single‐crystal X‐ray diffraction. Polymer I shows a 2D sheet structure. In polymer II , 1D octagonal channels are connected by the organic ligands to form a 3D architecture. Furthermore, the thermal characteristics of the two polymers and the coordination features of p‐BrPhH₃IDC were investigated.     

Inorganic—Organic Hybrid 18—Molybdodiphosphate Nanoparticles Bullk—modified Carbon Paste Electrode and Its Electrocatalysis

A kind of inorganic‐organic hybrid 18‐molybdodiphosphate nanoparticles ([(C₄H₉)₄N]₆P₂Mo₁₈Q₆₂·4H₂O) was firstly used as a bulk‐modifier to fabricate a three‐dimensional chemically modified carbon paste electrode (CPE) by direct mixing. The electrochemical behavior of the solid nanoparticles dispersed in the CPE in acidic aqueous solution was characterized by cyclic and square‐wave voltammetry. The hybrid 18‐molybdodiphosphate nanoparticles bulk‐modified CPE (MNP‐CPE) displayed a high electrocatalytic activity towards the reduction of nitrite, bromate and hydrogen peroxide. The remarkable advantages of the MNP‐CPE over the traditional polyoxometalates‐modified electrodes are their excellent reproducibility of surface‐renewal and high stability owing to the insolubility of the hybrid 18‐molybdodiphosphate nanoparticles.     

Construction Of Two New 6‐connected Manganese(II) Metal Organic Frameworks via Isomeric Biphenyldicarboxylates Based on the Dinuclear Secondary Building Unit

Two coordination polymers, namely {[Mn(2,4′‐bpdc)(bimb)(H₂O)_0.5] · 0.5H₂O}_n ( 1 ) and [Mn(4,4′‐bpdc)(bimb)]_n · 2.5H₂O ( 2 ) [2,4′‐bpdc = biphenyl‐2,4′‐dicarboxylate, 4,4′‐bpdc = biphenyl‐4,4′‐dicarboxylate, and bimb = 1,4‐bis(1‐imidazol‐yl)‐2,5‐dimethyl benzene], were hydrothermally synthesized by reactions of manganese(II) salt with the rigid ligand 1,4‐bis(1‐imidazol‐yl)‐2,5‐dimethyl benzene and isomeric biphenyl dicarboxylate ligands. Complex 1 has an unusual 6‐connected three‐dimensional (3D) architecture with point symbol (4⁴.6¹¹). Complex 2 has also a 3D structure with two‐interpenetrated pcu topology with point symbol (4¹².6³). Structural comparisons show that the positions of the carboxylate groups in the ligand backbone play an important role in governing the structural topologies of these complexes.     

Synthesis and Characterization of Three Zinc Phosphonates Based on 5‐Phosphonoisophthalic Acid, (HO2C)2C6H3PO3H2

Three new Zn‐phosphonates based on 5‐phosphonoisophthalic acid, (HO₂C)₂C₆H₃PO₃H₂ (H₄L), [Zn₂(H₂O)(O₂C)₂C₆H₃PO₃] · H₂O ( 1 ), Zn₂(H₂O)₂(O₂C)₂C₆H₃PO₃ ( 2 ), and KZn[H(O₂C)₂C₆H₃PO₃] ( 3 ) have been hydrothermally synthesized and characterized by single‐crystal X‐ray diffraction ( 1 : triclinic, , a = 742.49(3) pm, b = 846.37(4) pm, c = 992.84(4) pm, α = 80.936(2)°, β = 81.574(2)°, γ = 73.139(3)°, V = 586.28(4) · 10⁶ pm³, R1 = 0.0583, wR2 = 0.1347 (for I > 2σ(I)); 2 : monoclinic, P2₁/m, a = 464.78(9) pm, b = 1329.2(3) pm, c = 974.5(3) pm, β = 95.80(3)°, V = 599.0(2) · 10⁶ pm³, R1 = 0.0395, wR2 = 0.1086 (for I > 2σ(I)); 3 : monoclinic, P2₁/c, a = 501.9(1) pm, b = 2489.9(5) pm, c = 946.2(5) pm, β = 105.38(3)°, V = 1140.0(7) · 10⁶ pm³, R1 = 0.0365, wR2 = 0.0848 (for I > 2σ(I))). The title compounds 1 and 2 have the same chemical composition but exhibit different structures and are therefore polymorphs. Thus, in compound 1 , isolated ZnO₄‐tetrahedra, and in 2 , infinite double‐chains of corner‐sharing ZnO₆ polyhedra are observed. In, KZn[H(O₂C)₂C₆H₃PO₃] ( 3 ) K⁺‐ions have been incorporated into the structure leading to the formation of a bimetallic inorganic‐organic hybrid compound.     

Inorganic‐organic Microporous Solid of Wells‐Dawson Type Polyoxometalate: Synthesis,Characterization, and Electrochemical Properties

An inorganic‐organic hybrid solid (H_6/5bppy)₅[P₂W₁₈O₆₂]·4.5H₂O ( 1 ) (bppy = 4‐(5‐(4‐bromophenyl)pyridin‐2‐yl)pyridine) was hydrothermally synthesized by using pre‐constructed Wells‐Dawson type salt α‐K₆P₂W₁₈O₆₂·15H₂O as inorganic moiety. The crystal structure keeps integrated and steady under the interactions together of aryl packing, hydrogen bonding and halogen bonding. X‐ray single crystal structure analysis reveals that compound 1 contains cavities with the sizes of about 6 × 8Å, in which H₂O molecules are captured. The hybrid was used as a solid bulk modifier to fabricate a three‐dimensional bulk‐modified carbon paste electrode ( 1 ‐CPE) by direct mixing. The electrochemical and electrocatalytic behavior of the 1 ‐CPE has been studied in detail. The results exhibit that the redox ability of the Wells‐Dawson polyanions can be maintained in the hybrid solid, which has a good electrocatalytic activity toward the reduction of bromate and hydrogen peroxide. A hydrodynamic voltammetric experiment was performed to characterize the electrode as an amperometric sensor for the determination of hydrogen peroxide. The 1 ‐CPE showed long‐term stability and excellent reproducibility of surface renewal.     

Three Octacyanometallate‐Based LnIII–MV (Ln = La,Ce; M = Mo,W) Bimetallic Assemblies with a One‐Dimensional Rope‐Ladder Chain Structure

Three octacyanometallate‐based hetero‐bimetallic complexes, [Ln(H₂O)₄(CH₃CN)₂][M(CN)₈] · CH₃CN [Ln = La, M = Mo( 1 ), W( 2 ); Ln = Ce, M = W( 3 )], were synthesized and characterized structurally. Single‐crystal X‐ray analysis reveals that 1 – 3 are isomorphous and consist of infinite one‐dimensional (1D) 3,3 rope‐ladder chains, in which the 12‐membered puckered square Ln₂M₂(CN)₄ is the basic building unit. The 1D chains are further linked through interchain hydrogen bonds, resulting in a three‐dimensional (3D) supramolecular network.     

BaB2S4: Das erste nicht‐oxidische Chalkogenoborat mit trigonal‐planar und tetraedrisch koordiniertem Bor

BaB₂S₄: The first non‐oxidic Chalcogenoborate with Boron in a trigonal‐planar and tetrahedral Coordination Hitherto we know boron in a trigonal‐planar and a tetrahedral coordination within one crystal structure from boron oxides in various compounds. With the novel bariummetathioborate BaB₂S₄ we now report a crystal structure containing BS₃ and BS₄ units in the ratio 1 : 1 forming infinite chains along [001]. BaB₂S₄ was synthesized in a solid state reaction at a temperature of 800 °C from barium sulfide, amorphous boron and sulfur and crystallizes in the monoclinic space group Cc (no. 9) with the following lattice parameters: a = 6.6465(5) Å, b = 15.699(1) Å, c = 6.0306(5) Å, β = 110.96(1)°, Z = 4.     

Crystal Engineering of Acentric Diamondoid Metal–Organic Coordination Networks

Acentric three‐dimensional coordination polymers bis(isonicotinato)zinc ( 1 ) and bis(4‐pyridylacrylato)cadmium⋅H₂O ( 2 ) were synthesized under hydro(solvo)thermal conditions; they exhibit a threefold (see picture) and fivefold diamondoid structure, respectively. Both 1 and 2 are active for second harmonic generation and exhibit remarkable thermal stability.     

Solid Polymer Electrolyte Based on Pluronic P123 Triblock Copolymer‐Siloxane Organic‐Inorganic Hybrid

A novel organic‐inorganic hybrid electrolyte based on poly(ethylene oxide)‐poly(propylene oxide)‐poly(ethylene oxide) triblock copolymer (Pluronic P123) complexed with LiClO₄ via the co‐condensation of an epoxy trialkoxysilane and tetraethylorthosilicate was prepared. Characterization was made by a variety of techniques including powder X‐ray diffraction, AC impedance, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and multinuclear solid state NMR measurements. The hybrid with [O]/[Li] = 16 exhibited a mesophase with a certain degree of ordering, which arose by the self‐assembly of P123 with the silica network. The P123 triblock copolymer acts as a structure‐directing surfactant to organize with silica networks and as a polymer matrix to dissolve alkali lithium salts as well. The DSC results indicated the formation of transient crosslinking between Li⁺ ions and the ether oxygens of the EO and PO segments, resulting in an increase the T_g with increasing salt concentrations. Variable temperature ⁷Li‐{¹H} MAS NMR spectra revealed the presence of two different local environments for lithium cations, probably due to the lithium cations in the polymer‐rich domain and in the silica‐rich domain, respectively. A combination of XRD and conductivity results suggests that the drastically enhanced conductivity for the ordered hybrid electrolyte is closely related to the formation of mesophase, which may provide unique Li⁺ conducting pathways.     

Hydrothermal synthesis and crystal structure of a new inorganic/organic hybrid of scandium sulfate: (H2en)Sc2(SO4)4·(H2O)0.72

The first organically templated layered structure of scandium sulfate, (H₂en)Sc₂(SO₄)₄·(H₂O)_0.72, (en=ethylenediamine) was synthesized by a hydrothermal method and characterized by single crystal X-ray diffraction. In the title compound, scandium ions are bridged by sulfate groups with a ratio of 1:2 into a 4₃⁶ layer structure. These layers are parallel packed and separated from each other by ethylenediammonium dications and water molecules. The title compound crystallizes in the monoclinic space group P2/c, with cell parameters , , , β=91.210(3)°, and Z=2. Refinement gave R₁[I>2σ(I)]=0.0354 and wR₂[I>2σ(I)]=0.0878. Thermogravimetric analysis indicates that this material is thermally stable to above 400 °C.     

Hydrothermal Synthesis,Solid State Structure,and Thermal Properties of a Family of Isomorphous 1‐D Coordination Polymers Aggregated by Extensive Hydrogen Bonding: {[M(3,3′‐bpy)(H2O)4](SO4)·2H2O} (M = Co,Ni, Zn)

Hydrothermal synthesis has afforded a family of new coordination polymers incorporating 3,3′‐bipyridine (3,3′‐bpy), {[M(3,3′‐bpy)(H₂O)₄](SO₄)·2H₂O} (M = Co, Ni, Zn). The crystal structures revealed 1‐D undulating cationic ribbons of formulation {[M(3,3′‐bpy)(H₂O)₄]}_n²ⁿ⁺ with both unligated charge‐balancing sulfate anions and water molecules of crystallization entrapped by hydrogen bonding. The 1‐D ribbons run along the (101) crystal direction and further aggregate via extensive hydrogen bonding patterns. Thermal decomposition data were consistent with stepwise loss of water molecules of crystallization and aquo ligands followed by decomposition due to ligand removal.     

Solution‐Grown Organic Single‐Crystalline Donor–Acceptor Heterojunctions for Photovoltaics

Organic single crystals are ideal candidates for high‐performance photovoltaics due to their high charge mobility and long exciton diffusion length; however, they have not been largely considered for photovoltaics due to the practical difficulty in making a heterojunction between donor and acceptor single crystals. Here, we demonstrate that extended single‐crystalline heterojunctions with a consistent donor‐top and acceptor‐bottom structure throughout the substrate can be simply obtained from a mixed solution of C₆₀ (acceptor) and 3,6‐bis(5‐(4‐n‐butylphenyl)thiophene‐2‐yl)‐2,5‐bis(2‐ethylhexyl)pyrrolo[3,4‐c]pyrrole‐1,4‐dione (donor). 46 photovoltaic devices were studied with the power conversion efficiency of (0.255±0.095) % under 1 sun, which is significantly higher than the previously reported value for a vapor‐grown organic single‐crystalline donor–acceptor heterojunction (0.007 %). As such, this work opens a practical avenue for the study of organic photovoltaics based on single crystals.