Time‐of‐flight secondary ion mass spectrometry and gas chromatography–mass spectrometry studies of alkanethiol self‐assembled monolayers on nanoporous gold surfaces

The dimerization of alkanethiol mixtures (hexanethiol, octanethiol, and dodecanethiol) to form self‐assembled monolayers (SAMs) from headspace on nanoporous gold surfaces was studied for the first time using gas chromatography (GC/MS) and time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS). The nanoporous gold surfaces were obtained by an acidic etching of a 585‐gold alloy. Field emission scanning electron microscopy (FE‐SEM) was utilized to study the change of the surface geometry and porosity of the gold surfaces before and after etching. Alkanethiols were deposited from the vapor phase above the thiol solutions (headspace) on nanoporous gold plates and nanoporous gold solid‐phase vmicroextraction (SPME) fibers. The nanoporous gold substrates were analyzed by TOF‐SIMS and GC/MS, respectively. The TOF‐SIMS spectra exhibited various gold–sulfur ion clusters and specific peaks related to the adsorption of thiols such as deprotonated monomers, thiolate–Au, dimers (e.g., dialkyl sulfides–Au and dialkyl disulfides–Au). The GC/MS analysis of headspace extractions of alkanethiol mixtures by nanoporous gold SPME fibers showed a high extraction efficiency of alkanethiol, dialkyl sulfide, and dialkyl disulfide when compared with the commercial SPME fibers (DVB‐CAR‐PDMS and CAR‐PDMS). Different GC/MS optimization factors were studied including the extraction time and desorption temperature.     

Synthesis and self‐assembly of amphiphilic dendronized conjugated polymers

Two kinds of amphiphilic dendronized conjugated polymers, polyfluorene (PF) and poly(binaphthyl‐alt‐fluorene) (PBF), were synthesized by Suzuki polycondensation of hydrophobic macromonomers with two nonpolar octyloxy chains and hydrophilic macromonomers with two polar oligo(ethylene oxide) chains. In these polymers, PF possesses a linear rod‐like backbone structure, and PBF adopts a folded rigid backbone structure. The different configurations in the conjugated main chains result in different supramolecular self‐assembly morphologies. The optical and thermal properties of PF and PBF were also studied. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 574–584, 2008     

Preparation and functions of self‐assembled monolayers of helix peptides

Self‐assembled monolayers (SAMs) of helix peptides oriented vertically to a gold surface were prepared. Negative surface potentials of a few hundred millivolts were observed for the helix peptide SAMs when they were immobilized on gold through the N terminal of the peptides. However, positive surface potentials were generated in the helix peptide SAMs when the N terminal of the peptides was directed the opposite way. The large dipole moment of the helical peptide was thought to be the major factor for generation of the surface potential. The effect of the dipole moment on the electron transfer through the helix peptide SAMs was investigated. Photocurrent generation by photoexcitation of the N‐ethylcarbazolyl group of the peptide SAMs was accelerated by the dipole moment directed toward the gold substrate. Helical peptides were thus shown to be a suitable medium for electron transfer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4826–4831, 2000     

Formation of amino‐terminated self‐assembled monolayers from long‐chain aminomethoxylsilanes

3‐Aminopropyltriethoxylsilane (APS), N‐[3‐(Trimethoxylsilyl)propyl]‐ethylenediamine, N‐[3‐(Trimethoxylsilyl)propyl]diethyenetriamine were assembled onto silicon surfaces. Using a mixture of acetone and water as solvent, factors which would affect the formation of amino‐terminated self‐assembled monolayers (SAMs), such as water content in solvent and reaction time, were investigated. The structural information of SAMs was collected from contact angle measurements, ellipsometric thickness measurements and X‐ray photoelectronic spectroscopy. Reaction time and water content in solvent produced dominant effects on the formation of amino terminated SAMs. The method introduced in this paper also presents a simple and controllable way to prepare amino‐terminated SAMS. Copyright © 2012 John Wiley & Sons, Ltd.     

Mechanisms of secondary ion emission from self‐assembled monolayers and multilayers

Alkanethiol self‐assembled monolayers/multilayers (SAMs) have been applied as model organic systems with which to investigate secondary ion formation and emission processes during kiloelectronvolt ion bombardment. Self‐assembled monolayer and multilayer films of 11‐mercaptoundecanoic acid capped with 1‐dodecanethiol were prepared on gold‐coated substrates. Samples with varying number of thiolate layers were studied using static secondary ion mass spectrometry to investigate the origin of molecular secondary ions and the influence of surface chemistry and structure. The nature of the thiolate bonding affects the type and abundance of the observed ions. The intensity of atomic and cluster ions derived from the substrate decreases exponentially with increasing number of thiolate overlayers because of losses in transmission through the organic overlayers. Intact molecular and cluster ions can escape from >100 Å below the surface of these structures. The variation of molecular‐ion yields with multilayer thickness suggests that a significant proportion of molecular ions originate from subsurface thiolate layers. The detection of ions comprised species from the substrate or bottom of the multilayer associated with species from the top layer supports the view that chemical association at or near the surface is a viable mechanism of formation for molecular secondary ions. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis and characterization of hyperbranched amphiphilic block copolymers prepared via self‐condensing RAFT polymerization

Four families of hyperbranched amphiphilic block copolymers of styrene (Sty, less polar monomer) and 2‐vinylpyridine (2VPy, one of the two more polar monomers) or 4‐vinylpyridine (4VPy, the other polar monomer) were prepared via self‐condensing vinyl reversible addition‐fragmentation chain transfer polymerization (SCVP‐RAFT). Two families contained 4VPy as the more polar monomer, one of which possessing a Sty‐b‐4VPy architecture, and the other possessing the reverse block architecture. The other two families bore 2VPy as the more polar monomer and had either a 2VPy‐b‐Sty or a Sty‐b‐2VPy architecture. Characterization of the hyperbranched block copolymers in terms of their molecular weights and compositions indicated better control when the VPy monomers were polymerized first. Control over the molecular weights of the hyperbranched copolymers was also confirmed with the aminolysis of the dithioester moiety at the branching points to produce linear polymers with number‐average molecular weights slightly greater than the theoretically expected ones, due to recombination of the resulting thiol‐terminated linear polymers. The amphiphilicity of the hyperbranched copolymers led to their self‐assembly in selective solvents, which was probed using atomic force microscopy and dynamic light scattering, which indicated the formation of large spherical micelles of uniform diameter. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1310–1319     

Studies of protection of iron corrosion by rosin imidazoline self‐assembled monolayers

A type of rosin imidazoline (IM) has been synthesized using rosin acid and diethylenetriamine (DETA) as raw materials. The monolayers of IM were assembled on the surface of iron. The monolayers of the IM inhibitor were characterized by electrochemical impedance spectroscopy (EIS), electrochemical polarization curves and double‐layer capacitance. Surface analysis was carried out to establish the mechanism of corrosion inhibition of iron by X‐ray photoelectron spectroscopy (XPS) and scanning electron microscopy. The IM inhibitor showed good inhibition efficiency for iron in 0.1 M H₂SO₄. The inhibition mechanism of IM inhibitor was interpreted using molecular simulation. Copyright © 2006 John Wiley & Sons, Ltd.     

Formation and electrochemical desorption of self‐assembled monolayers as studied by ToF‐SIMS

Time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) was used to study a number of processes involving thiol‐based self‐assembled monolayers (SAMs) on nontextured (polycrystalline) gold (Au) films deposited on Si wafers. ToF‐SIMS turned out to be a convenient and versatile semiqualitative technique which readily verified electrochemical desorption of a SAM and formation of another SAM on the same sample via reincubation with another thiol. The technique, allowing one to follow simultaneously more than one species on the surface, showed that any formation of a mixed SAM on surfaces which did not undergo electrolysis was negligible with the applied time scale (minutes). Copyright © 2010 John Wiley & Sons, Ltd.     

Surfactant‐free synthesis of amphiphilic diblock copolymer in aqueous phase by a self‐stability process

Amphiphilic polymeric particles with hydrophobic cores and hydrophilic shells were prepared via living radical emulsion polymerization of styrene using a water‐soluble poly(acrylamide)‐based macro‐RAFT agent in aqueous solution in the absence of any surfactants. Firstly, the homopolymerization of acrylamide (AM) was carried out in aqueous phase by reversible addition‐fragmentation chain transfer radical polymerization (RAFT) using a trithiocarbonate as a chain transfer agent. Then the PAM‐based macro‐RAFT agent has been used as a water‐soluble macromolecular chain transfer agent in the batch emulsion polymerization of Styrene (St) free of surfactants. The RAFT controlled growth of hydrophobic block led to the formation of well‐defined poly(acrylamide)‐copolystyrene amphiphilic copolymer, which was able to work as a polymeric stabilizer (self‐stability). Finally, very stable latex was prepared, having no visible phase separation for several months. FTIR and ¹H‐NMR measurements showed that the product was the block copolymer PAM‐co‐PS in the form of stable latex. Atomic force microscope (AFM), transmission electron microscope (TEM), and dynamic light scattering (DLS) studies indicated that the nanoparticles have a narrow particle size distribution and the average particle hydrodynamic radius was kept in the diameter of 58 nm. Core‐shell structure of the copolymer was also recorded by TEM. The mechanism of the self‐stability of polymer particles during the polymerization in the absence of surfactants was studied. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3098–3107, 2008     

Preparation of few‐layer two‐dimensional polymers by self‐assembly of bola‐amphiphilic small molecules

Two bola‐amphiphilic small molecules, based on the diphenylanthracene skeleton structure, namely, BASM‐1 and its functionalized small molecule BASM‐2 , were designed and synthesized. The self‐assembly behavior and mechanism of these two molecules in aqueous solution were studied. The supramolecular two‐dimensional (2D) layer and the covalent 2D polymers were, respectively, prepared by these two molecules. What is more, the transverse size of the covalent 2D polymer laminates increased with the extension of the polymerization time. Atomic force microscopy results showed that both free‐standing single‐layer 2D polymers and few layer laminates with two to three molecular layers were obtained. So our work provides a simple and efficient method for directly preparing independent both supramolecular 2D polymers and covalent 2D polymers in liquid phase which is of great significance. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1748–1755     

Thiolactone chemistry for the synthesis of functional silicone‐based amphiphilic co‐networks

A series of amphiphilic co‐networks (ACNs) is prepared in a straightforward way via thiolactone chemistry by crosslinking a multivalent thiolactone‐functional poly(dimethylsiloxane) building block with poly(ethylene glycol) diacrylates. Formation of the networks is triggered by the addition of an amine, of which the nucleophilicity and steric bulk control the curing kinetics. Furthermore, some of the crosslinks can be sacrificed to introduce a fluorescent group or dye via a thia‐Michael addition, without affecting the bulk mechanical properties and swelling capabilities. The obtained ACNs exhibit a unique set of properties because of their nanophase separation, resulting in hydrophilic PEG and hydrophobic PDMS phases. Hence, swelling in both water and organic solvents is observed, of which the extent can be tuned by varying the overall PEG content. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 322–333     

Formation of alkane‐phosphonic acid self‐assembled monolayers on alumina: an in situ SPR study

The formation process of n‐alkane phosphonic acid CH₃ (CH₂)_n?1 PO(OH)₂ (n = 10,12,14,18) self‐assembled monolayers (SAMs), deposited from ethanol solutions on aluminum oxide, has been monitored in situ using surface plasmon resonance (SPR) spectroscopy. In addition, the two‐solvent approach is used to obtain both film thickness and refractive index of the fully formed adsorbed layers. A densely packed adsorbed layer is formed only for the longest molecules with n = 18. The chain length and solution concentration dependence of formation kinetics are studied, and the existence of two distinct kinetic steps is revealed. Fittings of the experimental results with various kinetic models are performed. Our analysis suggests that during the first kinetic step, a transition from a lying‐down to a standing‐up phase takes place, and the growth of this standing‐up phase is governed by second‐order kinetics. The second slow kinetic step is described by a modified first‐order Langmuir law. Copyright © 2009 John Wiley & Sons, Ltd.     

Optimization of bioreducible micelles self‐assembled from amphiphilic hyperbranched block copolymers for drug delivery

Dendritic polymers‐based unimolecular micelles with enhanced stability are attractive carriers. However, the preparation of dendrimers or dendrons with higher generation remains substantially synthetic challenge due to the increased steric hindrance, multistep and tedious preparation, and low yields. The adoption of Boltorn H40, a commercially available dendritic polymer of Boltorn family containing multiple hydroxyl groups with various functionalities as a dendrimer‐based starting core template for the generation of hyperbranched polymers, offers a straightforward solution to address this problem. To develop universal strategies toward H40‐based amphiphilic block copolymers, the “grafting from” and “grafting to” approaches were both applied in this study. The reduction‐insensitive block copolymers, H40‐b‐poly(ɛ‐caprolactone)‐b‐poly(oligo(ethylene glycol) monomethyl ether methacrylate) (H40‐b‐PCL‐b‐POEGMA), were synthesized by “grafting from” including sequential ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). The core structure and the polymer composition of the nonreducible amphiphilic hyperbranched block copolymers were optimized toward better properties and performance for drug delivery applications, and H40‐PCL₁₅‐b‐POEGMA₂₃ was screened as the best polymer construct relative to H20‐PCL₁₅‐b‐POEGMA₂₃ and H40‐PCL₁₅‐b‐POEGMA₃₂ in terms of micelle stability and drug loading capacity. Therefore, the reducible H40‐b‐PCL‐SS‐POEGMA with an identical core and polymer composition to that of H40‐PCL₁₅‐b‐POEGMA₂₃ was further prepared by “grafting to” using click coupling between H40‐PCL‐azide and P(OEGMA)‐alkyne. The delivery efficacy evaluated by an in vitro cytotoxicity study revealed that the resulting DOX‐loaded reducible micelles of H40‐PCL₁₅‐SS‐POEGMA₂₃ produced greater cytotoxicity in cancer cells than in normal cells and macrophages, therefore, are promising carriers for anticancer drug delivery. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1383–1394     

The self‐assembly over nano‐ to submicro‐length scales in water of a fluorescent julolidine‐labeled amphiphilic random terpolymer

A novel fluorescent‐labeled amphiphilic random terpolymer is synthesized by controlled radical polymerization of a fluorescent molecular rotor monomer, 2‐cyano‐2‐[4‐vinyl(1,1′‐biphenyl)‐4′‐yl]vinyljulolidine, a hydrophilic monomer, poly (ethylene glycol) methyl ether methacrylate, and a hydrophobic monomer, perfluorohexylethyl acrylate. Combined dynamic light scattering and fluorescence emission spectroscopy measurements are used to investigate its self‐assembly in water solution. Self‐assembled nanostructures with a hydrodynamic diameter size D_h of 4 ± 1 nm are detected due to the single‐chain folding of the terpolymer in unimer micelles. The fluorescence emission intensity of the terpolymer in water solution is found to be one order of magnitude higher than that in organic solvents, as a result of the preferential encapsulation of the julolidine co‐units in hydrophobic compartments of the unimer micelles. The temperature dependence of the self‐associative behavior of the amphiphilic terpolymer is also investigated and a critical temperature is identified at which a transition between single‐chain unimer micelles and multi‐chain aggregates (D_h = 400 ± 40 nm) reversibly takes place on heating–cooling cycles. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 797–804     

Facile synthesis and catalytic activity of well‐defined amphiphilic block copolymers based on N‐vinylimidazolium

Well‐defined amphiphilic block copolymers, poly(styrene)‐b‐poly(N‐vinylimidazole) (PS‐b‐PVim), were successfully synthesized by macromolecular design via interchange of the xanthates/reversible addition–fragmentation chain transfer (RAFT) polymerization. The structure of the copolymer based on Vim can be well controlled, and the molecular weight distribution was relatively narrow (PDI = 1.24). The size and morphology of the aggregates of the amphiphilic copolymers were investigated by dynamic light scattering and transmission electron microscope, the results implied that the uniform spheroidal micelles consisting of PS core and PVim corona were assembled, and the catalytic activities of PS‐b‐PVim for the hydrolysis of p‐nitrophenyl acetate at different temperatures were also investigated by high‐performance liquid chromatograph (HPLC); the catalytic activities of diblock copolymers were prominently improved compared with that of PVim homopolymers. Moreover, the catalytic activities of the copolymers followed the Arrhenius behavior in the wide experimental temperature range. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis,crystalline morphologies,self‐assembly,and properties of H‐shaped amphiphilic dually responsive terpolymers

Novel and well‐defined amphiphilic H‐shaped terpolymers poly(L‐lactide)‐block‐(poly(2‐(N,N‐dimethylamino)ethyl methacrylate) ‐block‐)poly(ε‐caprolactone)(‐block‐poly(2‐(N,N‐dimethylamino)ethyl methacrylate)) ‐b‐poly(L‐lactide) (PLLA‐b‐(PDMAEMA‐b‐)PCL(‐b‐PDMAEMA)‐b‐PLLA) were synthesized by the combination of ring‐opening polymerization, atom transfer radical polymerization, and click chemistry. The H‐shaped amphiphilic terpolymers can self‐assemble into spherical nano‐micelles in water. Because of the dually responsive (temperature and pH) properties of PDMAEMA segments, the hydrodynamic radius of the micelles of the H‐shaped terpolymer solution can be adjusted by altering the environmental temperature or pH values. The thermal properties investigation and the crystalline morphology analysis indicate that the branched structure of the H‐shaped terpolymers and the presence of amorphous PDMAEMA segments together led to the obvious decrease of PCL segments and the complete destruction of crystallinity of the PLLA segments in the H‐shaped terpolymers. In addition, the H‐shaped terpolymer film has better hydrophilicity than linear PCL or triblock polymer of PLLA‐b‐(N₃? )PCL(? N₃)‐b‐PLLA, due to the decrease or destruction of the crystallizability of the PCL or PLLA in the H‐shaped terpolymer and the presence of hydrophilic PDMAEMA segments. These unique H‐shaped amphiphilic terpolymers composed of biodegradable and biocompatible PCL and PLLA components and intelligent and biocompatible PDMAEMA component will have the potential applications in biomedical fields. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Novel amphiphilic homopolymers containing meta‐ and para‐pyridine moieties with living characteristics and their self‐assembly

Amphiphilic monomers containing the isomeric pyridine moieties 3‐(4‐vinylphenyl)pyridine (3VPPy) and 4‐(4‐vinylphenyl)pyridine (4VPPy) were synthesized using the Suzuki coupling reaction. A living anionic polymerization of 3VPPy and 4VPPy was successfully performed under various conditions to overcome the limitations of anionic polymerization and to compare their properties with those of poly(2‐(4‐vinylphenyl)pyridine) as reported previously. Several characteristics of the resulting isomeric P3VPPy and P4VPPy were studied, such as thermal stability, solubility, and the living nature. The block copolymerization of 4VPPy with 2‐vinylpyridine and MMA was carried out without additive to estimate the nucleophilicity of P4VPPy and to confirm its living nature. Additionally, each amphiphilic homopolymer of P3VPPy and P4VPPy containing both a hydrophilic pyridine unit and a hydrophobic styrene unit was tested for self‐assembly behavior in a mixed solvent (THF/water) and monitored with TEM and SEM. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3458–3469     

Functionalized block copolymers for preparation of reactive self‐assembled surface patterns

Two phase separating block copolymers equipped with functional groups (acid and alkyne) were synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization. Thin films of these materials were prepared and examined with regard to surface morphology, surface composition, and film stability. Self‐assembled structures with domain sizes of about 40 nm were detected through atomik force microscopy (AFM) analysis while X‐ray photoelectron spectroscopy measurements revealed a balanced surface exposure of the two segregated phases. Thus, reactive groups being present in both phases are specifically provided within nanoscopic surface areas. The films showed good stability on exposure to various solvents but the self‐organized surface patterns were only resistant toward ethanol. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Environmental vapor induced self‐assembly of an amphiphilic block copolymer poly(styrene‐b‐acrylamide) onto the solid substrate

The chemical and micro‐structural changes at the top surface of the film of amphiphilic block copolymer poly(styrene‐b‐acrylamide) (PS₉₅₀‐b‐PAM₅₀) induced by different environmental conditions and temperature have been studied. Atomic force microscopy (AFM), Transmission electron microscopy (TEM), Scanning electron microscope (SEM), X‐ray Photoelectron Spectroscopy (XPS), and contact angle (CA) goniometry studies revealed that the roughness and the surface property in terms of hydrophilicity/hydrophobicity of the film strongly depend on the environmental conditions. Humidity, presence of solvent vapor and temperature at the time of film preparation have immense role in controlling surface properties. Hence, it is suggested that the surface properties of the amphiphilic block copolymer film can be tuned according to the requirement for its potential applications. Copyright © 2010 John Wiley & Sons, Ltd.     

Novel fluorescent amphiphilic poly(allylamine) and their supramacromolecular self‐assemblies in aqueous media

Fluorescent amphiphilic polymers were produced by grafting different types and levels of hydrophobic pendant groups with intrinsic fluorescent properties (fluorenylmethoxy carbonyl (Fmoc), dimethylamino‐1‐naphthalenesulfonyl (Dansyl), and naphthalene (Naphth) to a water soluble homopolymer backbone, polyallylamine (PAA). Non‐fluorescent hydrophobic pendant group (cholesteryl moieties) were also grafted onto PAA. The polymers were characterized with elemental analysis, NMR and FTIR spectroscopy. All polymers formed self‐assemblies by probe sonication in water with sizes ranging from 120 to 199 nm and TEM images showed the presence of spherical particles. The critical aggregation concentration (CAC) varied from 0.093 to 1.5 mg ml^?1 depending on the type of hydrophobic pendant groups. The Cholesteryl and Dansyl polymers showed the presence of one CAC while the Fmoc and Naphth grafted polymers revealed the presence of two CACs. The first CAC observed was possibly due to intermolecular aggregation while the second CAC at the higher polymer concentration was the result of excimer formation revealed by their fluorescent spectra. We reasoned that Naphth and Fmoc aromatic pendant groups possess a flat stereochemistry, thus allowing π–π stacking at higher concentrations. The presence of the N‐dimethylamino group in the Dansyl moiety gives rise to a 3D structure, thus hindering any stacking. The understanding of the supramolecular assemblies formed by these fluorescent amphiphilic polymers will aid in the engineering of advanced materials with superior functionality for biomedical applications. Copyright © 2011 John Wiley & Sons, Ltd.