高速线性光采样用被动锁模光纤激光器重复频率优化

线性光采样是一种测量基于先进调制码型的高速光信号的有效手段, 而被动锁模光纤激光器是其实施所需的关键组件. 本文在介绍线性光采样工作原理的基础上, 首次分析得到被动锁模光纤激光器重复频率与待测信号光线宽的约束关系, 对于正交相移键控(QPSK)信号, 当信号光线宽与采样光脉冲重复频率的比值小于1.5×10^-3 时, 高速信号的相位噪声对线性光采样带来的损伤可以忽略不计. 利用95.984 MHz重复频率的被动锁模光纤激光器对线宽为100 kHz速率为28 Gbaud的QPSK信号开展相关实验, 通过标准数字相干接收算法可以得到与传统高速示波器相同的星座图, 理论分析与实验结果完全符合. 这一研究结果有助于线性光采样用被动锁模光纤激光器的优化设计.     

On the design of ultrafast shutters for time‐resolved synchrotron experiments

A comprehensive treatment of the limitations and possibilities for single‐pulse selection in synchrotron operating modes with ～150 ns bunch separation, as occurs in the standard operating mode at the Advanced Photon Source, is presented. It is shown that the strength of available materials and allowable kinetic energy build‐up limit single‐bunch selection for this separation to sample sizes of ～100 µm, and that for minimization of kinetic energy build‐up it is preferable to increase the r.p.m. within physically acceptable limits rather than increase the disc radius to obtain a desirable peripheral speed. A slight modification of the equal‐bunch spacing standard fill patterns is proposed that allows use of samples as large as 500 µm. The corresponding peripheral speed of the chopper wheel is ～600 m s^?1, which is within the limits of high‐strength titanium alloys. For smaller samples, peripheral speeds are proportionally lower. Versatility can be achieved with interchangeable chopper wheels and the use of different orientations of the rotation axis relative to the X‐ray beam, which opens the possibility of larger, rather than one‐of‐a‐kind, production runs.     

IDATEN and G‐SITENNO: GUI‐assisted software for coherent X‐ray diffraction imaging experiments and data analyses at SACLA

Using our custom‐made diffraction apparatus KOTOBUKI‐1 and two multiport CCD detectors, cryogenic coherent X‐ray diffraction imaging experiments have been undertaken at the SPring‐8 Angstrom Compact free electron LAser (SACLA) facility. To efficiently perform experiments and data processing, two software suites with user‐friendly graphical user interfaces have been developed. The first is a program suite named IDATEN, which was developed to easily conduct four procedures during experiments: aligning KOTOBUKI‐1, loading a flash‐cooled sample into the cryogenic goniometer stage inside the vacuum chamber of KOTOBUKI‐1, adjusting the sample position with respect to the X‐ray beam using a pair of telescopes, and collecting diffraction data by raster scanning the sample with X‐ray pulses. Named G‐SITENNO, the other suite is an automated version of the original SITENNO suite, which was designed for processing diffraction data. These user‐friendly software suites are now indispensable for collecting a large number of diffraction patterns and for processing the diffraction patterns immediately after collecting data within a limited beam time.