Regioselective Cage Opening of La2@D2(10611)‐C72 with 5,6‐Diphenyl‐3‐(2‐pyridyl)‐1,2,4‐triazine

The thermal reaction of the endohedral metallofullerene La₂@D₂(10611)‐C₇₂, which contains two pentalene units at opposite ends of the cage, with 5,6‐diphenyl‐3‐(2‐pyridyl)‐1,2,4‐triazine proceeded selectively to afford only two bisfulleroid isomers. The molecular structure of one isomer was determined using single‐crystal X‐ray crystallography. The results suggest that the [4+2] cycloaddition was initiated in a highly regioselective manner at the C? C bond connecting two pentagon rings of C₇₂. Subsequent intramolecular electrocyclization followed by cycloreversion resulted in the formation of an open‐cage derivative having three seven‐membered ring orifices on the cage and a significantly elongated cage geometry. The reduction potentials of the open‐cage derivatives were similar to those of La₂@D₂‐C₇₂ whereas the oxidation potentials were shifted more negative than those of La₂@D₂‐C₇₂. These results point out that further oxidation could occur easily in the derivatives.     

Synthesis and Structure of LaSc2N@Cs(hept)‐C80 with One Heptagon and Thirteen Pentagons

The synthesis and single‐crystal X‐ray structural characterization of the first endohedral metallofullerene to contain a heptagon in the carbon cage are reported. The carbon framework surrounding the planar LaSc₂N unit in LaSc₂N@C_s(hept)‐C₈₀ consists of one heptagon, 13 pentagons, and 28 hexagons. This cage is related to the most abundant I_h‐C₈₀ isomer by one Stone–Wales‐like, heptagon/pentagon to hexagon/hexagon realignment. DFT computations predict that LaSc₂N@C_s(hept)‐C₈₀ is more stable than LaSc₂N@D_5h‐C₈₀, and suggests that the low yield of the heptagon‐containing endohedral fullerene may be caused by kinetic factors.     

Synthesis and Characterization of the First Doubly‐bridged N,N‐dimethylthiocarbamoyl Metal Complex: Crystal Structure of [Mo(Cl)(CO)2(PPh3)]2(η1:η2:μ‐SCNMe2)2

The first doubly‐bridged thiocarbamoyl metal complex [Mo(Cl)(CO)₂(PPh₃)]₂(η¹:η²:μ‐SCNMe₂)₂ ( 2 ) was formed from stirring [Mo(CO)₂(η²‐SCNMe₂)(PPh₃)₂Cl] ( 1 ) in dichloromethane at room temperature. Complex 2 is a dimer with each thiocarbamoyl unit coordinating through sulfur and carbon to one metal center and bridging both metals through sulfur. Complex 2 is characterized by X‐ray diffraction analysis.     

Crystal and Molecular Structure of [2,6‐(Me2NCH2)2C6H3]2SnF2, an Intramolecularly Coordinated Diorganotin Difluoride

Single‐crystal X‐ray diffraction analysis of [2,6‐(Me₂NCH₂)₂C₆H₃]₂SnF₂ reveals that only one of the two dimethylaminomethyl groups of each pincer‐type ligands [2,6‐(CH₂NMe₂)₂C₆H₃]^? is coordinated to the tin atom at Sn‐N distances of 2.576(2) and 2.470(2) Å, inducing chirality of the latter. The tin atom exhibits a distorted octahedral trans(C,C)cis(N,N)cis(F,F) configuration. Extensive intra‐ and intermolecular C‐H···F hydrogen bonding is observed with the latter giving rise to formation of polymeric chains.     

Synthesis and Crystal Structures of the Molybdenum(II) Complexes with the N,N‐dimethylthiocarbamoyl Containing Ligand: Crystal Structures of [Mo(CO)2(η2‐S2COEt)(η2‐SCNMe2)(PPh3)] and [Mo(CO)2(η2‐S2CNC4H8)(η2‐SCNMe2)(PPh3)]

The reaction of the thiocarbamoyl‐molybdenum complex [Mo(CO)₂(η²‐SCNMe₂)(PPh₃)₂Cl] 1 , with EtOCS2K and C4H8NCS2NH4 in dichloromethane at room temperature yielded the seven coordinated ethyldithiocarbonate thiocarbamoyl‐molybdenum complex [Mo(CO)₂(η²‐S₂COEt)(η²‐SCNMe₂)(PPh₃)] 2 , and the dithiocarbamate thiocarbamoyl‐molybdenum complex [Mo(CO)₂(η²‐S₂CNC₄H₈)(η²‐SCNMe₂)(PPh₃)] 3 . The geometry around the metal atom of compounds 2 and 3 are capped octahedrons as revealed by X‐ray diffraction analyses. The thiocarbamoyl and ethyldithiocarbonate or pyrrolidinyldithiocarbamate ligands coordinate to the molybdenum metal center through the carbon and sulfur and two sulfur atoms, respectively. Structure parameters, NMR, IR and Mass spectra are in agreement with the crystal chemistry of the two compounds.     

Synthesis and Crystal Structure of [Nd(η6‐1, 3, 5‐C6H3Me3)‐(AlCl4)3](C6H6) and Structural Comparison of Ln(η6‐arene)‐(AlCl4)3

Reaction of Ndcl₃ with AlCl₃ and mesitylene in benzene gives complex [Nd(η⁶‐1, 3, 5‐C₆H₃Me₃)‐(AlCl₄)₃](C₆H₆) (1) which was characterized by elemental analysis, IR spectra, MS and X‐ray diffractions. The X‐ray determination indicates that 1 has a distorted pentagonal bipyramidal geometry and crystallizes in the monoclinic, space group P2₁/n with a = 0.9586(2), b = 1.1717(5), c = 2.8966(7) nm, β = 90.85 (2)°, V = 3.2529 (6) nm³,D_c= 1.573 g/cm³, Z = 4. A comparison of bond parameters for all the reported Ln (η⁶‐Ar) (AlCl₄)₃ complexes indicates that the bond distance of La? C is shortened with the increasing of methyl group on benzene and with the decreasing of radius of lanthanide ions.     

Synthesis and X‐ray Crystal Structures of Ru3(CO)9(μ‐arphos)(L) [L = AsPh3, As(m‐C6H4Me)3, As(p‐C6H4Me)3]

Three new triruthenium clusters, Ru₃(CO)₉(μ‐arphos)AsPh₃ ( 1 ), Ru₃(CO)₉(μ‐arphos)As(m‐C₆H₄Me)₃ ( 2 ), and Ru₃(CO)₉(μ‐arphos)As(p‐C₆H₄Me)₃ ( 3 ) were synthesized via thermal reactions of Ru₃(CO)₁₀(μ‐arphos) with different tertiary arsine ligands [AsPh₃, As(m‐C₆H₄Me)₃, As(p‐C₆H₄Me)₃]. All these complexes were fully characterized by elemental analysis, FT‐IR, NMR spectroscopy, and single‐crystal X‐ray diffraction.     

The Nitrogen‐Assisted Triphenylphosphine Displacement of Methylpyridine Ligand in Palladium(II) Complex: Crystal Structures of [Pd(PPh3)2{η1‐C5H3N(CH3)}(Br)] and [Pd(PPh3)Br]2{μ,η2‐C5H3N(CH3)}2

Treatment of Pd(PPh₃)₄ with 2‐bromo‐4‐methylpyridine, C₅H₃N(CH₃)Br, in dichloromethane at ?20 °C causes the oxidative addition reaction to produce the palladium complex [Pd(PPh₃)₂ {η¹‐C₅H₃N(CH₃)}(Br)], 2 , by substituting two triphenylphosphine ligands. In a dichloromethane solution of complex 2 at room temperature for 3 h, it undergoes displacement of the triphenylphosphine ligand to form the dipalladium complex [Pd(PPh₃)Br]₂{μ,η²‐C₅H₃N(CH₃)}₂, 3 , in which the two 4‐methylpyridine ligands coordinated through carbon to one metal center and bridging the other metal through the nitrogen atom. Complexes 2 and 3 are characterized by X‐ray diffraction analyses.     

Re‐Determination of the Crystal Structure of MIL‐91(Al)

The structure of one of the first permanently porous metal phosphonates, MIL‐91(Al) was re‐determined using high resolution synchrotron powder X‐ray diffraction data. The new model is in a lower symmetry space group, with no disordered ligands in the structure, whilst remaining otherwise consistent with the reported compound. New milder synthetic conditions were also developed.     

Kristallstrukturen der iso‐Thiocyanatoberyllate (Ph4P)2[Be(NCS)4] und (Ph4P)4[{Be2(NCS)4(μ‐NCS)2}{Be2(NCS)6(μ‐H2N2C2S2)}]

Bis(tetraphenylphosphonium) hexachloridodiberyllate, (Ph₄P)₂[Be₂Cl₆], reacts with excess trimethylsilyl‐iso‐thiocyanate to give a mixture of colourless single crystals of (Ph₄P)₂[Be(NCS)₄] ( 1 ) and (Ph₄P)₄[{Be₂(NCS)₄(μ‐NCS)₂}{Be₂(NCS)₆(μ‐H₂N₂C₂S₂)}] ( 2 ), which can be separated by selection. Both complexes were characterized by X‐ray diffraction. Compound 1 can be prepared without by‐products by treatment of (Ph₄P)₂[BeCl₄] with excess Me₃SiNCS in dichloromethane solution. 1 : Space group I4₁/a, Z = 4, lattice dimensions at 100(2) K: a = b = 1091.2(1), c = 3937.1(3) pm, R₁ = 0.0474. The [Be(NCS)₄]^2– ion of 1 forms tetragonally distorted tetrahedral anions with Be–N distances of 168.4(2) pm and weak intermolecular S ··· S contacts along [100] and [010]. 2 ·4CH₂Cl₂: Space group P , Z = 1, lattice dimensions at 100(2) K: a = 919.5(1), b = 1248.3(1), c = 2707.0(2) pm, α = 101.61(1) °, β = 95.08(1) °, γ = 94.52(1) °, R₁ = 0.103. Compound 2 contains two different anionic complexes in the ratio 1:1. In {Be₂(NCS)₄(μ‐NCS)₂}^2–, the beryllium atoms are connected by (NCS)^– bridging groups forming centrosymmetric eight‐membered Be₂(NCS)₂ rings with distances Be–N of 168(1) pm and Be–S of 235.2(9) pm. The second anion {Be₂(NCS)₆(μ‐H₂N₂C₂S₂)}^2– consists of two {Be(NCS)₃}^– units, which are linked by the nitrogen atoms of the unique dimeric cyclo‐addition product of HNCS with Be–N distances of 179(1) pm.     

Synthesis,Crystal Structure and Selected Properties of Mono(dithiocarbamato)‐gold(I), AuS2CNH2

The title compound AuS₂CNH₂ was prepared from an aqueous solution by reaction of dicyanidoaurate [Au(CN)₂]^– with excess of ammoniumdithiocarbamate NH₄S₂CN H ₂ at pH ≈ 2. The compound crystallizes in the orthorhombic space group Cmma with a = 6.4597(2), b = 12.6556(3), and c = 5.3235(1) Å. The crystal structure comprises linear S–Au–S dumbbells forming unbranched zigzag chains in combination with the dithiocarbamate ligands. The three‐dimensional arrangement of the molecules is realized by aurophilic Au^I–Au^I and hydrogen bonding interactions, respectively. AuS₂CNH₂ presents orange luminescence due to a broad emission band between 12000 cm^–1 and 23000 cm^–1 (ν = 26316 cm^–1).     

A New Chair‐shaped Conformation Containing HgHgOHgHgO: Synthesis and Structure of Hg4(L2)2(NO3)4 (L2 = morpholin‐4‐ylpyridin‐2‐ylmethyleneamine)

. The complex Hg₄(L²)₂(NO₃)₄ ( 1 ) (L² = morpholin‐4‐ylpyridin‐2‐ylmethyleneamine) has been synthesized and characterized by CHN analysis, IR, and UV/Vis spectroscopy. The crystal structure of 1 was determined using single‐crystal X‐ray diffraction. The crystal structure of 1 contains four mercury atoms, four nitrate anions (two terminal and two bridge ones) and two L² ligand molecules. A chair shape, six‐membered ring is formed with the sequence OHgHgOHgHg built from Hg–Hg dumbbells and oxygen atoms from the nitrate co‐ligands. In the crystal structure, the asymmetric unit of the compound is built up by one‐half of the molecule. It contains the Hg₂²⁺ moiety with a mercury–mercury bonded core, in which one diimine ligand is coordinated to one of the mercury atoms. The nitrate anions act as anisobidentate and bidentate ligands.     

Synthesis,Reactivity and Crystal Structures of the Palladium(II) Complexes with the Pyrimidine Containing Ligand: Crystal Structures of [Pd(PPh3)(η1‐C4H3N2)(η2‐S2CNC4H8)] and [Pd(PPh3)(η1‐C4H3N2)(η2‐Tp)]

Treatment of Pd(PPh₃)₄ with 5‐bromo‐pyrimidine [C₄H₃N₂Br] in dichloromethane at ambient temperature cause the oxidative addition reaction to produce the palladium complex [Pd(PPh₃)₂(η¹‐C₄H₃N₂)(Br)], 1 , by substituting two triphenylphosphine ligands. In acetonitrile solution of 1 in refluxing temperature for 1 day, it do not undergo displacement of the triphenylphosphine ligand to form the dipalladium complex [Pd(PPh₃)Br]₂{μ,η²‐(η¹‐C₄H₃N₂)}₂, or bromide ligand to form chelating pyrimidine complex [Pd(PPh₃)₂(η²‐C₄H₃N₂)]Br. Complex 1 reacted with bidentate ligand, NH₄S₂CNC₄H₈, and tridentate ligand, KTp {Tp = tris(pyrazoyl‐1‐yl)borate}, to obtain the η²‐dithiocarbamate η¹‐pyrimidine complex [Pd(PPh₃)(η¹‐C₄H₃N₂)(η²‐S₂CNC₄H₈)], 4 and η²‐Tp η¹‐pyrimidine complex [Pd(PPh₃)(η¹‐C₄H₃N₂)(η²‐Tp)], 5 , respectively. Complexes 4 and 5 are characterized by X‐ray diffraction analyses.     

Crystal Structure,Synthesis, and Properties of tri‐Calcium di‐Citrate tetra‐Hydrate [Ca3(C6H5O7)2(H2O)2]·2H2O

From hydrothermal synthesis needle‐shaped crystals of [Ca₃(C₆H₅O₇)₂(H₂O)₂] · 2H₂O were obtained. The crystal structure was determined by single‐crystal X‐ray experiments and confirmed by powder data (P$\bar{1}$ (no. 2) a = 5.9466(4), b = 10.2247(8), c = 16.6496(13) Å, α = 72.213(7)°, β = 79.718(7)°, γ = 89.791(6)°, V = 947.06(13) Å³, Z = 2, R1 = 0.0426, wR2 = 0.1037). The structure was obtained from pseudo merohedrically polysynthetic twinned crystals using a combined data collection approach and refinement processes. The observed three‐dimensional network is dominated by eightfold coordinated Ca²⁺ cations linked by citrate anions and hydrogen bonds between two non‐coordinating crystal water molecules and two coordinating water molecules.