Microspheres from stereocomplexes of polylactides containing ionic liquid end‐groups

Low‐molecular‐weight polymers of L ‐ and D ‐lactide containing different end‐groups (hydroxy, butoxy, trifluoromethoxy, heptafluorobutoxy, oxyethylimidazole groups, and groups derived from the imidazolium ionic liquid) are synthesized. It is shown that the nature of end‐groups affects the stereocomplexation of corresponding pairs of polymers. Stereocomplex of poly(L ‐lactide) and poly(D ‐lactide) containing imidazolium ionic liquid end‐groups (PLA‐IL) precipitates from 1,4‐dioxane solution in the form of monodisperse, perfectly spherical microspheres. Such behavior of PLA‐IL, not observed for polymers containing other end‐groups, can be attributed to the presence of strongly interacting ionic liquid end‐groups. This conclusion is supported by the results of ¹H NMR and dynamic light scattering experiments as well as by direct observation of precipitated particles by scanning electron microscopy. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Radical graft polymerization of vinyl monomers onto nanoparticles in ionic liquid initiated by azo groups introduced onto the surface

The radical graft polymerization of vinyl monomers, such as styrene and methyl methacrylate, initiated by azo groups introduced onto silica nanoparticle and carbon black surfaces in room temperature ionic liquid (IL) were investigated. In this work, 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([C₄mim][PF₆]) was used as IL. The percentage of polystyrene and poly(methyl methacrylate) grafting onto silica nanoparticle and carbon black increased with increasing reaction time. The percentage of grafting in IL was much larger than that in 1,4‐dioxane. The molecular weight of polystyrene grafted onto the silica surface in IL was almost equal to that in 1,4‐dioxane. The result indicates that the amount of grafted polystyrene in IL is five times that in 1,4‐dioxane. This may be due to the fact that lifetime of the surface radical formed by the group of azo is prolonged because of high viscosity of IL. Therefore, the surface azo groups were effectively used as initiating sites for the graft polymerization. In addition, the reduction of waste solvent was achieved by use of IL as reaction solvent, because unreacted monomer could be removed under vacuum after the reaction and the reuse of IL was easily achieved. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1143–1149, 2007     

Synthesis of ω‐sulfonated polystyrene via reversible addition fragmentation chain transfer polymerization and postpolymerization modification

The synthesis of chain‐end sulfonated polystyrene [PS (ω‐sulfonated PS)] by reversible addition fragmentation chain transfer (RAFT) polymerization followed by postpolymerization modification was investigated by two methods. In the first method, the polymer was converted to a thiol‐terminated polymer by aminolysis. This polymer was then sulfonated by oxidation of the thiol end‐group with m‐chloroperoxybenzoic acid (m‐CPBA) to produce a sulfonic acid end‐group. In the second method, the RAFT‐polymerized polymer was directly sulfonated by oxidation with m‐CPBA. After purification by column chromatography, ω‐sulfonated PS was obtained by both methods with greater than 95% end‐group functionality as measured by titration. The sulfonic acid end‐group could be neutralized with various ammonium or imidazolium counter ions through acid–base or ionic metathesis reactions. The effect of the ionic end‐groups on the glass transition temperature of the PS was found to be consistent with what is known for PS ionomers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Manganese(III) acetate‐catalyzed synthesis of polyguaiacol

Polyguaiacol was synthesized in the mixtures of water and various organic solvents using manganese(III) acetate as a new catalyst for radical polymerization and a biomimetic model for manganese peroxidase. Aqueous solutions of 30–70% (v/v) acetonitrile, 1,4‐dioxane, and methanol were used as model solvent mixtures. The polymer yield in the methanol (<30%) solution was lower than that in the acetonitrile or 1,4‐dioxane solution (60–90%). The average molecular weight of the polymer was also lowest in the methanol solution. Difference UV absorption spectroscopy analysis revealed that nonhydrated guaiacol clusters were found to be dominant in acetonitrile and 1,4‐dioxane solutions, especially when the content of 1,4‐dioxane was 50% (v/v) or higher. In the methanol solution, only the hydrated guaiacol clusters were observed. From the comparison of ¹H NMR data for polyguaiacol and products of guaiacol oxidation by manganese(III) acetate, 3‐(4‐hydroxy‐3‐methoxy‐phenyl)‐5,3′‐dimethoxy‐4,4′‐biphenol and a mixture of 5‐(4‐hydroxy‐3‐methoxyphenyl)‐3,3′‐dimethoxy‐4,4′‐biphenoquinone and 3‐(4‐hydroxy‐3‐methoxyphenyl)‐5,3′‐dimethoxy‐4,4′‐biphenoquinone were found to be the major structural units of polyguaiacol. Water molecule is not involved in the formation of these compounds. Therefore, the polymerization should take place readily not in methanol but in acetonitrile and 1,4‐dioxane solutions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6009–6015, 2008     

Conformational behavior of nylon 6 in mixed solvents

The intrinsic viscosity [η], Huggins constant (K_H), laser light scattering, UV and IR measurements of Nylon 6 are made in m‐cresol and its mixture with 1,4‐dioxane at 20–60 °C. The intrinsic viscosity, R_g, A₂, (<S>²)^1/2 (calculated from viscosity data), R_H, and UV absorbance initially increase and then decrease with the rise in 1,4‐dioxane contents. The K_H and the transmittance of ? OH group in IR spectra show an opposite trend to that of [η]. The dielectric constant calculated from the refractive index of the solvent (m‐cresol with 1,4‐dioxane) and polymer solution shows a continuous decrease with the amount of 1,4‐dioxane. Activation energy shows a minimum while linear expansion coefficient (α³) maximum with the addition of 1,4‐dioxane. Change in [η], K_H, and other characteristics of the polymer solutions with alterations in solvent composition and temperature are the result of variation in the thermodynamic quality of the solvent, its selective adsorption, hydrogen bonding, and conformational transitions. It has been concluded that the addition of 1,4‐dioxane first enhances the quality of the solvent, encourages hydrogen bonding, and specific adsorption, and then deteriorates, bringing conformational transitions in the polymer molecules. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 534–541, 2005     

Cationic polymerization of L,L‐lactide

Cationic bulk polymerization of L ,L‐ lactide (LA) initiated by trifluromethanesulfonic acid [triflic acid (TfA)] has been studied. At temperatures 120–160 °C, polymerization proceeded to high conversion (>90% within ～8 h) giving polymers with M_n ～ 2 × 10⁴ and relatively high dispersity. Thermogravimetric analysis of resulting polylactide (PLA) indicated that its thermal stability was considerably higher than the thermal stability of linear PLA of comparable molecular weight obtained with ROH/Sn(Oct)₂ initiating system. Also hydrolytic stability of cationically prepared PLA was significantly higher than hydrolytic stability of linear PLA. Because thermal or hydrolytic degradation of PLA starting from end‐groups is considerably faster than random chain scission, both thermal and hydrolytic stability depend on molecular weight of the polymer. High thermal and hydrolytic stability, in spite of moderate molecular weight of cationically prepared PLA, indicate that the fraction of end‐groups is considerably lower than in linear PLA of comparable molecular weight. According to proposed mechanism of cationic LA polymerization growing macromolecules are fitted with terminal ? OH and ? C(O)OSO₂CF₃ end‐groups. The presence of those groups allows efficient end‐to‐end cyclization. Cyclic nature of resulting PLA explains its higher thermal and hydrolytic stability as compared with linear PLA. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2650–2658, 2010     

Ionic poly(p‐phenylene terephthalamide)s: Solubility and thermal stability

Ionic sulfonate groups were incorporated onto molecules of the rigid‐rod polymer poly(p‐phenylene terephthalamide) (PPTA) in two different positions. In one type, S‐PPTA, ionic sulfonate groups were attached to the phenylene ring of the backbone chain. S‐PPTA solubility was achieved in dimethylsulfoxide (DMSO) when 50% of the repeat units contained an ionic group. In the second type, PPTA‐PS, where ionic propanesulfonate groups served as side chains, solubility was achieved in DMSO when 30% of the repeat units contained the ionic group. For both of the partially sulfonated ionic polymers, the thermal stability was enhanced in comparison with the stability of the acid‐form polymers, but it was less than that of PPTA. The effect was more dramatic when the ionic groups were located at the end of side chains. The nature of the counterion also played a role, with doubly ionized calcium giving the best results. Polarized light micrographs of the ionic PPTA polymers displaced birefringent patterns and indicated that greater rigidity was present when the ionic groups were directly attached to the backbone, rather than at the end of a short side chain. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2888–2897, 2001     

Synthesis and micellization of new biodegradable phosphorylcholine‐capped polyurethane

To obtain controllable and biocompatible drug carriers, a series of amphiphilic biodegradable multiblock polyurethanes end‐capped by phosphorylcholine were designed and synthesized using L ‐lysine ethyl ester diisocyanate (LDI), poly(lactic acid)‐poly(ethylene glycol)‐poly(lactic acid) (PLA‐PEG‐PLA), 1,4‐butanediol (BDO), and 4‐hydroxy butyl phosphorylcholine (BPC) was used as end‐capper to improve their biocompatibility and provide them with tailored micellization characteristics. The resulting polyurethanes were fully characterized with proton nuclear magnetic resonance spectroscopy (¹H NMR), Fourier transform infrared spectroscopy (FT‐IR), gel permeation chromatograph (GPC), and differential scanning calorimetry (DSC). More importantly, these phosphorylcholine‐capped polyurethanes can self assemble into micelles that are smaller than 100 nm in diameter. Their particle sizes, size distributions, and zeta potentials can also be tailored by varying the phosphorylcholine content. The incorporation of phosphorylcholine into these polyurethanes has significantly affected their degree of microphase separation, bulk and micelle degradation rates. This work provides a new and facile approach to prepare amphiphilic block copolymer micelles with controllable performances, which could be useful for drug delivery and bioimaging applications. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Enhanced Nucleation and Crystallization in PLA/CNT Composites via Disperse Orange 3 with Corresponding Improvement in Nanomechanical Properties

The potential for the material property improvement through the addition of carbon nanotubes (CNTs) in composite materials is often limited due to CNT agglomeration. In this work, Disperse Orange 3 (DO3) was investigated to determine its effectiveness in dispersing CNTs in a poly (lactic acid) (PLA) matrix. First, adsorption studies of DO3 onto CNTs were performed to determine the appropriate amount of DO3 to add so that the CNT surface will be nearly saturated with DO3 while limiting the excess DO3 dissolved in the polymer. The resultant improvements in the mechanical properties were determined via nanoindentation. Highly stable dispersion of CNTs in tetrahydrofuran with DO3 was observed 72 hours after sonication. Scanning electron microscopy confirmed that DO3‐functionalized CNTs were able to separate and disperse well inside of the PLA matrix. Addition of DO3 to the nanocomposite resulted in an increase in the glass transition temperature and crystallinity of the composite due to the more effective dispersion of the nanofiller which serves as a nucleation agent. The CNTs treated with DO3 also increased the elastic modulus and hardness of the composite compared to neat PLA and untreated PLA‐CNT composites. From this study, DO3 was demonstrated to be an effective dispersing agent in the solvent and the PLA matrix which allowed for enhanced crystallization and improved nanomechanical properties in the resultant composite.     

Electrospun poly(aniline‐co‐ethyl 3‐aminobenzoate)/poly(lactic acid) nanofibers and their potential in biomedical applications

Poly(aniline‐co‐ethyl 3‐aminobenzoate) (3EABPANI) copolymer was blended with poly(lactic acid) (PLA) and co‐electrospun into nanofibers to investigate its potential in biomedical applications. The relationship between electrospinning parameters and fiber diameter has been investigated. The mechanical and electrical properties of electrospun 3EABPANI‐PLA nanofibers were also evaluated. To assess cell morphology and biocompatibility, nanofibrous mats of pure PLA and 3EABPANI‐PLA were deposited on glass substrates and the proliferation of COS‐1 fibroblast cells on the nanofibrous polymer surfaces determined. The nanofibrous 3EABPANI‐PLA blends were easily fabricated by electrospinning and gave enhanced mammalian cell growth, antioxidant and antimicrobial capabilities, and electrical conductivity. These results suggest that 3EABPANI‐PLA nanofibrous blends might provide a novel bioactive conductive material for biomedical applications. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Synthesis and polymerization of styrene monomer carrying isothiocyanate moiety and its copolymerization with HEMA based on chemo‐selectivity to nucleophiles

Isothiocyanate is a very useful functional group for post‐polymerization modification by the reaction with amine or alcohol. An isothiocyanate monomer, 4‐vinylbenzyl isothiocyanate, was synthesized from 4‐vinylbenzyl chloride without using any harmful reagents such as thiophosgene and CS₂. The obtained monomer was successively polymerized by the conventional radical polymerization (AIBN, 1,4‐dioxane, 60 °C) to afford the corresponding polymer. The obtained polymer was characterized by ¹H NMR, FTIR, thermogravimetric analysis (TGA), and differential scanning calorimetry. In contrast to the isocyanate group, the isothiocyanate group was relatively tolerant to alcohols, and this character enabled us to synthesize a copolymer of 4‐vinyl benzylisothiocyanate and (2‐hydroxyethyl methacrylate). The copolymer is transformed into networked polymer by 1,8‐diazabicyclo[5.4.0]undec‐7‐ene as a promoter of the reaction between isothiocyanate and alcohol to afford thiocarbamate. The formation of networked polymer was characterized by FTIR and TGA. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5215–5220     

The effect of heat treatment on water sorption in polylactide and polylactide composites via changes in glass‐transition temperature and crystallization kinetics

Water sorption into polylactide (PLA) and polylactide‐montmorillonite (PLLA‐MONT) composites containing 5 wt % of montmorillonite (MONT) under different heat treatment conditions was studied using the quartz crystal microbalance/heat conduction calorimetry (QCM/HCC) technique. Results showed that water sorption in neat polymer films and composite films increased with heat treatment temperature up to 120 °C. Differential scanning calorimetry was used to measure the glass‐transition temperature and isothermal crystallization kinetics of all samples. The mobility of the amorphous domain in all samples increased with heat treatment temperature, indicated by the decrease in glass‐transition temperature. PLA composites crystallized at a much faster rate than neat PLA did because MONT acted as a nucleating agent. Under the same heat treatment condition, water sorption in PLLA‐MONT composites was always higher than that in neat PLA due to the presence of the hydrophilic hydroxyl groups on the surface of MONT particles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Narrow disperse polymers using amine functionalized dithiobenzoate RAFT agent and easy removal of thiocarbonyl end group from the resultant polymers

A novel amine functionalized RAFT agent, 2‐cyanoprop‐2‐yl(4‐N,N‐dimethylaminophenyl) dithiobenzoate has been synthesized and used to control the polymerization of vinyl monomers. This dithiobenzoate RAFT agent, although air sensitive, controlled the polymerization of MMA and St very well in an inert atmosphere and the polymerization results obtained were marginally better than using the most popular 2‐cyanoprop‐2‐yl dithiobenzoate RAFT agent. The living nature of these polymerizations was confirmed by kinetics study and chain extension reactions to yield narrow disperse di‐block copolymers. Most importantly, use of this novel RAFT agent simplified the removal procedure of the color causing end thiocarbonyl group from the RAFT derived polymers and thereby leading to polymers with improved appearance. The removal of end group from the polymer was confirmed by ¹H NMR and UV‐vis spectroscopic techniques. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of amphiphilic poly(N‐vinylcaprolactam) using ATRP protocol and antibacterial study of its silver nanocomposite

Atom transfer radical polymerization (ATRP) of N‐vinylcaprolactam (NVCL) was studied by uisng ethyl‐2‐bromoisobutyrate (EIB) as initiator in 1,4‐dioxane. It led to controlled radical polymerization of NVCL, with the molecular weight increased along with the conversion of monomer and a relatively narrow molecular weight distribution could be obtained, as determined by gel permeation chromatography. ¹H NMR showed that the major population of poly(N‐vinylcaprolactam) (PVCL) retained the chain‐end functional group. The living nature of the ATRP for NVCL was confirmed by the experiments of PVCL chain extension. PVCL was further investigated for its ability to form micelles in aqueous media. Self‐assembling of the amphiphilic PVCL leads to the formation of their micellar aggregates in aqueous media which was confirmed by transmission electron microscope. The critical micelle concentration value was calculated from the photophysical changes of Pyrene‐1‐Carboxaldehyde by UV absorption studies and was found to be 0.0320 mg/mL. The polymer nanocomposite was synthesized and examined in view of antibacterial effect against Enterococcus faecalis, Staphylococcus aureus, Escherichia coli, Proteus mirabilis, and Klebsiella pneumonae. It was found that polymer nanocomposite possess strong antibacterial activity against Enterococcus faecalis with minimum inhibitory concentration value of 32 μg/mL. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Polyurethanes from polyols obtained by ADMET polymerization of a castor oil‐based diene: Characterization and shape memory properties

The acyclic diene metathesis polymerization (ADMET) of 1,3‐di‐10‐undecenoxy‐2‐propanol, a castor oil based diene, is reported. 10‐Undecenol was used as renewable comonomer to end‐cap polymer chains and limit the molecular weight. The poly ols obtained in this way were reacted with 4,4′‐methylenebis(phenylisocyanate) (MDI) to yield a series of amorphous and semicrystalline polyurethane networks. The thermal stability and the thermomechanical and mechanical properties of these thermosets have been studied and showed good shape memory properties for the semicrystalline polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

New series of AB2‐type hyperbranched polytriazoles derived from the same polymeric intermediate: Different endcapping spacers with adjustable bulk and convenient syntheses via click chemistry under copper(I) catalysis

In this article, according to the concept of “suitable isolation group,” six new AB₂‐type polytriazoles containing azo‐chromophore moieties, derived from the same hyperbranched polymer intermediate, were successfully prepared through click reaction under copper(I) catalysis by modifying the synthetic route, in which different isolation groups in different size were introduced to the periphery of the hyperbranched polymers as end‐capping moieties. With the different end‐capping groups, these hyperbranched polymers, P1 – P6 , exhibited different solubility and processability; also, their nonlinear optical properties were modified accordingly, realizing the adjustment of the properties of hyperbranched polymers through the structural design. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation and properties of ionic‐liquid‐containing poly(ethylene glycol)‐based networked polymer films having lithium salt structures

Ionic‐liquid‐containing polymer films were prepared by swelling poly(ethylene glycol)‐based networked polymers having lithium salt structures with an ionic liquid, 1‐ethyl‐3‐methylimidazolium bis(fluorosulfonyl)imide (EMImFSI), or with an EMImFSI solution of lithium bis(trifluoromethanesulfonyl) imide (LiTFSI). Their fundamental physical properties were investigated. The networked polymer films having lithium salt structures were prepared by curing a mixture of poly(ethylene glycol) diglycidyl ether and lithium 3‐glycidyloxypropanesulfonate or lithium 3‐(glycidyloxypropanesulfonyl)(trifluoromethanesulfonyl)imide with poly(ethylene glycol) bis(3‐aminopropyl) terminated. The obtained ionic‐liquid‐containing films were flexible and self‐standing. They showed high ionic conductivity at room temperature, 1.16–2.09 S/m for samples without LiTFSI and 0.29–0.43 S/m for those with 10 wt % LiTFSI. Their thermal decomposition temperature was above 220 °C, and melting temperature of the ionic liquid incorporated in the film was around ?16 °C. They exhibited high safety due to good nonflammability of the ionic liquid. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and electroluminescence properties of white‐light single polyfluorenes with high‐molecular weight by click reaction

We reported a new way to synthesize single‐chain white light‐emitting polyfluorene (WPF) with an increased molecular weight using azide‐alkyne click reaction. Four basic polymers with specific end‐capping, which exhibited high‐glass transition temperatures (T_g > 100 °C) and excellent thermal stability, were used as foundations of the WPF's synthesis; a blue‐light polymer (PFB2) end‐capped with azide groups can easily react with acetylene end‐capped polymers (PFB1, PFG1, and PFR1, which are emitting blue‐, green‐ and red‐light, respectively) to form triazole‐ring linkages in polar solvents such as N,N‐dimethylforamide/toluene co‐solvent at moderate temperature of 100 °C, even without metal‐catalyst. Several WPFs that consist of these four basic polymers in certain ratios were derived, and the polymer light‐emitting diode device based on the high‐molecular weight WPF was achieved and demonstrated a maximum brightness of 7551 cd/m² (at 12.5 V) and a maximum yield of 5.5 cd/A with Commission Internationale de l'Eclairage coordinates of (0.30, 0.33) using fine‐tuned WPF5 as emitting material. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Facile synthesis of polymers bearing cyclic carbonate structure through radical solution and precipitation polymerizations accompanied by concurrent carbon dioxide fixation

The radical polymerization of glycidyl methacrylate (GMA) was conducted under a carbon dioxide atmosphere (1 atm) in the presence of catalysts for the reaction of carbon dioxide and the oxirane group to afford the five‐membered cyclic carbonate group. The degrees of the carbon dioxide fixation depended on catalysts, concentration, and solvents. In solution reaction, the slower polymerizations resulted in faster carbon dioxide fixation, due to the faster carbon dioxide fixation to GMA than to oxirane moieties in polymers. When the polymerization was conducted in 1,4‐dioxane, which is a good solvent for polyGMA but a poor solvent for the analogous polymer bearing cyclic carbonate moieties, the resulting polymers were precipitated out as the progress of the polymerization and the carbon dioxide fixation. As a result, polymers could be isolated by simple filtration and rinsing with methanol. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3170–3176, 2009     

Preparation of a solution‐processable,nanostructured ionic polyacetylene

Polymerization of a self‐assembled 1‐dodecyl‐3‐propargylimidazolium bromide ionic liquid (IL) yields a nanostructured ionic polyacetylene. A 1:1 aqueous mixture of the amphiphilic IL produces an ordered lyotropic mesophase that adopts a hexagonal perforated lamellar structure. Rh (I)‐mediated polymerization of the assembled mixture yields a hexagonal modulated lamellar structured polymer. FTIR spectroscopy reveals that the polymer was self n‐doped. The polymer was fractioned into three components with the majority product, possessing an intermediate molecular weight that is soluble in polar organic solvents. In methanol, the optical band gap of the main fraction was determined to be 2.38 eV and was nonemissive. The solution‐processable polymer was airbrush sprayed onto glass substrates to give a liquid‐crystalline, lamellar structured semiconductive film (7.02 × 10^?5 S cm^?1). The polymer resisted oxidation (degradation) upon storage in air as monitored by vibrational spectroscopy. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1215–1227