Preparation of durable superhydrophobic surface by sol–gel method with water glass and citric acid

Durable superhydrophobic surface on cotton fabrics has been successfully prepared by sol–gel method. Cellulose fabric was first coated with silica sol prepared with water glass and citric acid as the acidic catalyst. The silica coated fabric was then padded with hydrolyzed hexadecyltrimethoxysilane afterwards obtaining low surface energy. Water contact angle and hydrostatic pressure were used to characterize superhydrophobicity and washing durability. Scanning electron microscopy was used to characterize the surface morphology changes after certain washing times. All results showed good durable hydrophobicity on cellulose fabrics. In addition, the influence of citric acid and sodium hypophosphite (NaH₂PO₂) on the durability of hydrophobicity was also investigated. The durability of treated cotton improved with the increase of concentration of citric acid in the presence of NaH₂PO₂. It could be concluded that citric acid acted as multi-functional heterogeneous grafting chemicals to improve washing durability of hydrophobicity by forming the ester bonds between cotton fabric and silica sol and improved the durability of hydrophobicity.     

One‐Pot Synthesis of Cu2O/ZnO Nanoparticles at Present of Folic Acid to Improve UV‐Protective Effect of Cotton Fabrics

In this study, the effect of using folic acid on the in situ synthesis process of nanostructures has been investigated. Folic acid, as a biotemplate for synthesis of Cu₂O/ZnO, was used to improve the reducing and stabilizing the ability of cotton fabric and avoid agglomeration of the particles. Scanning electron microscopy images revealed that using folic acid caused the formation of particles with smaller sizes on the cotton fabric and X‐ray diffraction confirmed the same crystalline pattern of nanoparticles in comparison with the previous synthesis process. The effect of using this biotemplate on different properties of treated fabrics including UV‐protection effect, hydrophilicity, crease recovery angle, softness, thickness and mechanical properties has been evaluated. The folic acid had a great influence on UV‐protection effect, in synthesis procedure, decreasing the droplet absorption time, bending length and improving the wrinkle resistance and mechanical properties. Interestingly, the higher tensile strength of the treated cotton fabrics proved the incorporation of nanoparticles into the cotton fibers. An in situ, green and rapid method can be provided by using folic acid for the synthesis of the nanostructures with controlled size.     

An improvement on the adhesion‐strength of laminated ultra‐high‐molecular‐weight polyethylene fabrics: surface‐etching/modification using highly effective helium/oxygen/nitrogen plasma treatment

In this study, helium/oxygen/nitrogen (He/O₂/N₂)‐plasma was used to etch/modify the surface of ultra‐high‐molecular‐weight polyethylene (UHMWPE) fiber. After coated with polyurethane (PU), the plasma treated UHMWPE fabrics were laminated. It was found that the values of peeling strength between the laminated UHMWPE fabrics treated with He/O₂/N₂‐plasma were significantly higher (3–4 times) than that between pristine fabrics. The hydrophilic property and the value of the surface roughness of the UHMWPE fibers increased significantly after treated with He/O₂/N₂‐plasma. The mechanism of the oxidation/degradation of the polymers on the surface of the UHMWPE fiber during He/O₂/N₂‐plasma treatment was suggested. In addition, it was found that the higher content of functional groups (carbonyl, aldehyde, and carboxylic acid) on fiber surface and the higher value of surface roughness of the UHMWPE fiber treated with He/O₂/N₂‐plasma could significantly improve the adhesion‐strength of the laminated UHMWPE fabric. Especially, the micro‐aperture on the surface of UHMWPE fiber caused by the strenuous etching of He/O₂/N₂‐plasma treatment was also an important factor on improving the adhesion‐strength between the laminated UHMWPE fabrics. Copyright © 2010 John Wiley & Sons, Ltd.     

阻燃超疏水棉纤维的制备及性能

将氢氧化镁(Mg(OH)₂)凝胶沉积到棉纤维上,以提高棉纤维表面粗糙度和阻燃性能,随后将含有Mg(OH)₂的棉纤维浸渍到聚二甲基硅氧烷(PDMS)溶液,获得阻燃超疏水棉织物。 并对棉纤维进行了傅里叶变换红外光谱仪(FTIR)、扫描电子显微镜(SEM)、疏水性、热稳定性、阻燃性能和耐久性测试。 结果表明,Mg(OH)₂负载到织物上,使得织物表面具有一定的微/纳米结构,形成了粗糙涂层。 当Mg(OH)₂浓度为1.0 mol/L时,Mg(OH)₂/PDMS改性的织物接触角(CA)可达158°,极限氧指数(LOI)提升至24.5%,导热系数为0.0525 W/(m·K), 具有超疏水和阻燃性能。 整理后织物经过20次洗涤,100次磨擦,极端条件处理后,CA仍大于150°,LOI值高于23%,显示了较好的耐久性。     

Enhanced Self‐Cleaning Properties on Polyester Fabric Under Visible Light Through Single‐Step Synthesis of Cuprous Oxide Doped Nano‐TiO2

Nowadays, introducing self‐cleaning properties on various fabrics under daylight irradiation for automotive and upholstery application is in a central point of research. This can be achieved by application of metal‐doped TiO₂ nano particles on the textile fabrics. Here, alkali hydrolysis of polyester fabric has been carried out along with synthesis of Cu₂O/TiO₂ nanoparticles in a single‐step process by using sonochemical technique. CuSO₄.5H₂O was used as a source of copper in the presence of glucose as reducing and stabilizing agent. Moreover, central composite design based on response surface methodology (RSM) was used to determine the role of variables (CuSO₄.5H₂O, glucose and pH) and their effects on the self‐cleaning properties and weight of the fabric. The self‐cleaning property was investigated by degradation of Methylene blue on the surface of the treated fabrics under daylight. Further, the tensile properties, colorimetric measurement, and washing fastness of the treated fabric produced in the optimum conditions were investigated. The morphology of Cu₂O/TiO₂ nanoparticles was examined using X‐ray diffraction and field emission scanning electron microscopy (FESEM). The new polyester fabric obtained through in situ synthesis of Cu₂O/TiO₂ nanoparticles can be used as a desirable stable fabric with high tensile strength and visible‐light self‐cleaning properties.     

Effective removal of 2,4,6‐trinitrophenol over hexagonal metal–organic framework NH2‐MIL‐88B(Fe)

A nanostructured organic–inorganic framework, hexagonal NH₂‐MIL‐88B, has been prepared through a facile one‐pot reflux reaction and then it was characterized using various techniques. The as‐prepared sample with high specific surface area (414 m² g^?1) showed excellent adsorption for 2,4,6‐trinitrophenol (TNP) in the liquid phase. Detailed studies of the adsorption kinetics, adsorption mechanism, adsorption isotherm, activation energy and various thermodynamic parameters were conducted. The adsorption mechanism of NH₂‐MIL‐88B for TNP may be ascribed to hydrogen bond interaction, and the complexation between ─OH in TNP and unsaturated Fe(III) on the surface of NH₂‐MIL‐88B. The maximum adsorption capacity of NH₂‐MIL‐88B for TNP based on the Langmuir isotherm was 163.66 mg g^?1. The as‐prepared NH₂‐MIL‐88B adsorbent seems to be a promising material in practice for TNP removal from aqueous solution.     

Phosphorus‐containing polyamide Mg(OH)2 nanocomposite coating on surface of poly(vinyl chloride) thin film: Study on thermal stability,flammability, and mechanical properties

Surface of poly(vinyl chloride) (PVC) thin films was coated using DOPO‐based polyamide (DBPA) coating and DBPA/Mg(OH)₂ nanocomposites (DBPN) coating by dip‐coating process. For this purpose, a new DOPO‐based dicarboxylic acid (DBDA) was synthesized and used for preparation of DBPA and organically surface modification of Mg(OH)₂ nanoparticles. The effects of DBPA and DBPN coatings on the morphology, thermal stability, combustion, and mechanical properties of PVC were investigated. The uniform dispersion of Mg(OH)₂ nanoparticles (nano‐MDH) and organically coating manner on the surface of the PVC films were confirmed by ATR‐IR spectroscopy, X‐ray diffraction (XRD), field emission scanning electron microscopy (FE‐SEM), energy dispersive X‐ray, and elemental mapping. From thermal gravimetry analysis (TGA) results, the 10 mass% loss temperature (T₁₀) increased from 268°C to 272°C in PVC coated with DBPA‐containing 10 mass% of modified Mg(OH)₂ (MMH). Also the char residue, first and second mass loss temperatures of all PVC coated were increased compared with the neat PVC film. According to microscale combustion calorimetry (MCC) results, the peak of heat release rate (pHHR) and total heat release (THR) were decreased from 128 ± 2 to 69 W/g and 12 ± 1 to 4 ± 2 KJ/g for PVC film coated with DBPA‐containing 10 mass% of MMH, compared with the neat PVC. From tensile test results, tensile strength was increased from 31.78 ± 0.8 to 39.64 ± 0.9 MPa for PVC coated with polyamide‐containing 5 mass% of MMH compared with the neat PVC.     

MOF‐on‐MOF: Oriented Growth of Multiple Layered Thin Films of Metal–Organic Frameworks

The precise alignment of multiple layers of metal–organic framework (MOF) thin films, or MOF‐on‐MOF films, over macroscopic length scales is presented. The MOF‐on‐MOF films are fabricated by epitaxially matching the interface. The first MOF layer (Cu₂(BPDC)₂, BPDC=biphenyl‐4,4′‐dicarboxylate) is grown on an oriented Cu(OH)₂ film by a “one‐pot” approach. Aligned second (Cu₂(BDC)₂, BDC=benzene 1,4‐dicarboxylate, or Cu₂(BPYDC)₂, BPYDC=2,2′‐bipyridine‐5,5′‐dicarboxylate) MOF layers can be deposited using liquid‐phase epitaxy. The co‐orientation of the MOF films is confirmed by X‐ray diffraction. Importantly, our strategy allows for the synthesis of aligned MOF films, for example, Cu₂(BPYDC)₂, that cannot be grown on a Cu(OH)₂ surface. We show that aligned MOF films furnished with Ag nanoparticles show a unique anisotropic plasmon resonance. Our MOF‐on‐MOF approach expands the chemistry of heteroepitaxially oriented MOF films and provides a new toolbox for multifunctional porous coatings.     

Development of an environmentally friendly halogen‐free phosphorus–nitrogen bond flame retardant for cotton fabrics

A novel flame retardant diethyl 4‐methylpiperazin‐1‐ylphosphoramidate (CN‐3) containing phosphorous and nitrogen was prepared. Its chemical structure was confirmed by nuclear magnetic resonance (¹H‐, ¹³C‐, and ³¹P‐NMR), Fourier transform infrared spectroscopy, and elemental analysis. Print cloth and twill fabrics were treated with CN‐3 to achieve different levels of add‐on (7–22 wt% add‐ons for print cloth and 3–18 wt% add‐ons for twill). Thermogravimetric analysis, vertical flame test, and limiting oxygen index (LOI) were performed on the treated cotton fabrics and showed promising results. When the treated print cloth and twill fabric samples were tested using the vertical flame test (ASTM D6413‐08), we observed that the ignited fabrics self‐extinguished and left behind a streak of char. Treated higher add‐ons fabrics were neither consumed by flame nor produced glowing ambers upon self‐extinguishing. LOI (ASTM 2863–09) was used to determine the effectiveness of the flame retardant on the treated fabrics. LOI values increased from 18 vol% oxygen in nitrogen for untreated print cloth and twill fabrics to maximum of 28 and 31 wt% for the highest add‐ons of print cloth and twill, respectively. The results from cotton fabrics treated with CN‐3 demonstrated a higher LOI value as well as a higher char yield because of the effectiveness of phosphorus and nitrogen as a flame retardant for cotton fabrics. Furthermore, FT‐IR and SEM were used to characterize the chemical structure on the treated fabrics as well as the surface morphology of char areas of treated and untreated fabrics. Published 2012. This article is a US Government work and is in the public domain in the USA.     

Comparison of copolymer emulsions of fluorine and siloxane‐containing acrylates with core–shell structure for water‐repellent cotton fabrics coatings

This paper described the synthesis of copolymer emulsions of fluorine and siloxane‐containing acrylates for water‐repellent cotton fabrics coatings. Chemical composition, morphology structure, and properties of the latex copolymers were investigated by Fourier transform infrared (FTIR), dynamic light scattering (DLS), gel permeation chromatography (GPC), and transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). Effects of water‐repellent functional monomers (R_f) on surface morphology, water contact angle, and water‐repellent properties of the coated fabric surface were also studied. The results indicated that R_f greatly influenced molecular mass distribution of the latex copolymers, the molecular aggregation states and orientation of R_f on the coated fabric surface, and water‐repellency of coated cotton fabrics. Copyright © 2014 John Wiley & Sons, Ltd.     

The effect of citric acid on the catalytic activity of nano‐sized MoS2 toward sulfur‐resistant CO methanation

In this work, a facile hydrothermal route was used to prepare nano‐sized MoS₂ catalyst. The effect of citric acid during the MoS₂ preparation process on the catalytic activity of sulfur‐resistant CO methanation was investigated. It was found that citric acid played an adverse role on the catalytic activity of MoS₂ toward sulfur‐resistant CO methanation. However, CO methanation performance turned out to be better when NH₂OH?HCl as a reductant was removed during the catalyst preparation process. The X‐ray diffraction (XRD) and infrared spectroscopy (IR) were performed to discuss the possible mechanism for the effect of citric acid towards CO methanation performance.     

Removal of Cu(II) from CuSO4 Aqueous Solution by Mg‐Al Hydrotalcite‐like Compounds

Hydrotalcite‐like compound (HTlc) with a Mg/Al molar ratio of 2:1 was synthesized by using a coprecipitation method and the sorption removal of Cu(II) by the Mg‐Al HTlc sample from CuSO₄ solution was investigated. It was found that the Mg‐Al HTlc showed a good sorption ability for Cu(II) from CuSO₄ solution, indicating that the use of hydrotalcite‐like compounds as promising inorganic sorbents for the removal of heavy metal ions from water is possible. The sorption kinetics and the sorption isotherm of Cu(II) on the HTlc obeyed the pseudo‐second order kinetic model and Langmuir equation, respectively. The percent removal of Cu(II) by the HTlc was strongly dependent on the initial pH of bulk solution. It increased sharply with the increase of initial pH value in the range of 5–7, and was relatively small in the initial pH range of 4–5, while it reached about 100% after initial pH was higher than 7. The presence of AlCl₃ might obviously lower the equilibrium sorption amount (q_e) of Cu(II) on the HTlc. However, the presences of NaCl and MgCl₂ might increase the q_e. The presences of ligands (citric acid and EDTA) in the studied concentration range might obviously decrease the q_e of Cu(II) on the HTlc. The removal mechanism of Cu(II) cations by HTlc in the presence of SO₄^2? anions may be attributed to the surface‐induced precipitation of Cu(II) hydroxides and the surface complex adsorption by the linking effect of SO₄^2? between the HTlc and Cu(II) cations, and the removal ability arising from the surface‐induced precipitation is much higher than that from the linking effect of SO₄^2?.     

Functionalization of cotton fabrics with rutile TiO<Subscript>2</Subscript> nanoparticles: Applications for superhydrophobic,UV-shielding and self-cleaning properties

The superhydrophobic cotton fabrics were prepared by combining the coating of titanium dioxide (TiO₂) with the subsequent dodecafluoroheptyl-propyl-trimethoxysilane (DFTMS) modification. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) measurements revealed that the nanosized TiO₂ sphere consisted of granular rutile. The TiO₂ layer coated on the cotton altered both the surface roughness for enhancing the hydrophobicity and UV-shielding property. The cotton fabric samples showed excellent water repellency with a water contact angle as high as 162°. The UV-shielding was characterized by UV-vis spectrophotometry, and the results indicated that the fabrics could dramatically reduce the UV radiation. The photocatalytic progress showed that organic stains were successfully degraded by exposure of the stained fabric to UV radiation. Such multifunctional cotton fabrics may have potentials for commercial applications.     

Adsorption of 4‐Chloro‐2‐methylphenoxy Acetic Acid (MCPA) from Aqueous Solution onto Cu‐Fe‐NO3 Layered Double Hydroxide Nanoparticles

The nanoparticles of Cu‐Fe‐NO₃ layered double hydroxide (LDH) were prepared with Cu/Fe molar ratio of 2:1 by a thermal process and co‐precipitation method at pH 9 and were characterized by X‐ray powder diffraction (XRPD), thermal gravimetric analysis (TGA), atomic adsorption spectroscopy (AAS) and fourier infrared spectroscopy (FT‐IR). The size and morphology of nanoparticles were examined by transmission electron microscopy (TEM). Cu‐Fe‐NO₃‐LDH was studied as a potential adsorbent of the acid herbicide MCPA [(4‐chloro‐2‐methylphenoxy) acetic acid] as function of pH, contact time and temperature. The results showed high and rapid adsorption of MCPA on the LDH. The characterization of the adsorption products by XRD indicates that the intercalation of MCPA between the LDH layers has not occurred and surface adsorption has happened. The adsorption kinetic was tested for pseudo‐first‐order, pseudo‐second‐order, elovich and intra‐particle diffusion kinetic models and rate constants were calculated. Freundlich and Langmuir isotherm models were applied to experimental equilibrium data obtained from the measurements of pesticide adsorption. Langmuir isotherm slightly better fitted to the experimental data than that of Freundlich. In the adsorption experiments, the Gibbs free energy ΔG⁰ values, the enthalpy ΔH⁰, and entropy ΔS⁰ were determined.     

Synthesis,Water Adsorption,and Proton Conductivity of Solid‐Solution‐Type Metal–Organic Frameworks Al(OH)(bdc‐OH)x(bdc‐NH2)1−x

Mixed‐ligand metal–organic frameworks Al(bdc‐OH)_x(bdc‐NH₂)_1?x (H₂bdc‐NH₂=aminoterepthalic acid, H₂bdc‐OH=hydroxyterephthalic acid) were synthesized and their water adsorption behavior and proton conductivity were investigated. All obtained compounds were isostructural to MIL‐53 (MIL=Materials of Institut Lavoisier) according to XRD measurements under ambient humidity conditions, and were also found to be single phase across the whole mixing ratio from the XRD measurements under humidified conditions. This result clearly shows that all compounds are a solid‐solution‐type mixture of ligands. MIL‐53‐NH₂ adsorbs one water molecule per formula with humidification whereas MIL‐53‐OH adsorbs five water molecules. The mixing ratio of the ligands in Al(OH)(bdc‐OH)_x(bdc‐NH₂)_1?x affected the gate‐opening pressure for water adsorption and total water uptake. Proton conductivity of these compounds largely depends on the adsorbed amount of water, which indicates that the proton conductivity of these compounds depends strongly on the hydrogen‐bond network of the conducting media.     

Vapor‐Surface Sol‐Gel Deposition of Titania Alternated with Protein Adsorption for Assembly of Electroactive,Enzyme‐Active Films

Combining vapor‐surface sol‐gel deposition of titania with alternate adsorption of oppositely charged iron heme proteins provided ultrathin {TiO₂/protein}_n films with reversible voltammetry extended to 15 TiO₂/protein bilayers, more than twice that of more conventional polyion‐protein or nanoparticle‐protein films made by alternate layer‐by‐layer adsorption. Catalytic activity toward O₂, H₂O₂, and NO was also improved significantly compared to the conventionally fabricated films. The method involves vaporization of titanium butoxide into thin films of water, forming porous TiO₂ sol‐gel layers. Myoglobin (Mb), hemoglobin (Hb), and horseradish peroxidase (HRP) were assembled by adsorption alternated with the vapor‐deposited TiO₂ layers. Improved electrochemical and catalytic performance may be related to better film permeability leading to better mass transport within the films, as suggested by studies with soluble voltammetric probes, scanning electron microscopy (SEM) and atomic force microscopy (AFM). The electrochemical and electrocatalytic activity of the films can be controlled by tailoring the amount of water with which the metal alkoxide precursor vapor reacts and the number of bilayers deposited in the assembly.     

Preparation of antibacterial cellulose with a monochloro‐s‐triazine‐based N‐halamine biocide

A novel monochloro‐s‐triazine‐based N‐halamine precursor, 4‐(4‐(5,5‐dimethylhydantoin‐3‐ethylamino)‐6‐chloro‐1,3,5‐triazinylamino)‐benzenesulfonate (HB), was synthesized and characterized by proton nuclear magnetic resonance. The reactive dyes dyeing method was applied to bond HB onto cotton fabrics, and the treated fabrics were confirmed by Fourier transform infrared spectrometer and scanning electron microscope. The chlorinated HB‐treated fabrics showed excellent antibacterial efficacies against Staphylococcus aureus and Escherichia coli O157:H7 and inactivated all inoculated bacteria within 1 min of contact. Interestingly, it was found that the finishing process and following chlorination caused smaller tensile strength loss of cotton fabrics than the traditional pad‐dry‐cure method. Furthermore, the antimicrobial cotton fabrics exhibited good stability and regenerability. Copyright © 2015 John Wiley & Sons, Ltd.     

In Situ Synthesis and Characterization of Nano ZnO on Wool: Influence of Nano Photo Reactor on Wool Properties

This study has been carried out to synthesize nano ZnO on wool fabric and also to investigate influences of nano photo reactors on wool fabric characteristics. Zinc acetate has been used as a precursor and the synthesis process has been done in water and water/ethanol media. The treated wool fabrics were heated at 80°C for 10 h to dehydrate Zn(OH)₂ obtaining ZnO. The fabric samples were then subjected to daylight for 7 days to examine the influence of nano ZnO photo reactor on the fabric properties. SEM images revealed the embedding of ZnO nanoparticles on the fabrics and X‐ray diffraction verified the nanoparticles composition. The Yellowness Index (YI) of the fabrics was measured with Color Eye XTH that has been reduced with increasing pH, Zn(CH₃COO)₂ concentration, ethanol and heating. The lower water contact angle and time of water absorption confirmed higher hydrophilic properties of the treated fabrics. Interestingly, a higher tensile strength obtained on the wool fabrics proved the interaction of ZnO with protein chains of wool, which was verified through lower alkali solubility of treated fabric with nano ZnO and confirmed more benefits of the in situ synthesis process.     

Antimicrobial activity of hydrophobic cotton coated with N‐halamine

γ‐(β‐Hydroxy‐γ‐5,5‐dimethylhydatoin)‐propyltriethoxysilane, a N‐halamine precursor, was synthesized with 3‐aminopropyltriethoxysilane and 3‐glycidyl‐5,5‐dimethylhydantoin. The N‐halamine precursor was tethered to the cotton fabric through ether linkages. The treated fabrics can be rendered excellent antimicrobial activity through a bleaching process. It can inactivate 100% of the Staphylococcus aureus and Escherichia coli O157:H7 with a contact time of 10 min and 30 min, respectively. Over 30% of the chlorine could be regained after the equivalent of 50 machine washes and rechlorination. The coatings resulted in a significant increase of hydrophobicity of cotton samples. In addition, the wrinkle recovery angle of the treated fabrics increased to some degree. Copyright © 2014 John Wiley & Sons, Ltd.     

Silver‐Doped TiO2‐Coated Cotton Fabric as an Effective Photocatalytic System for Dye Decolorization in UV and Visible Light

In this study, titanium tetra‐isopropoxide was used as a precursor of TiO₂ for in situ coating on cotton fabric by sol–gel method. Subsequently, silver nitrate was used as doping agent to prepare silver‐doped TiO₂‐coated cotton fabric during hydrothermal treatment. The treated samples were characterized through field‐emission scanning electron microscopy, energy‐dispersive X‐ray analysis, inductively coupled plasma‐mass spectroscopy and UV–visible absorption spectroscopy to study morphology, composition of deposited elements and light absorption behavior of treated samples. X‐ray photoelectron spectroscopy was carried out to analyze the electronic state of silver in TiO₂‐coated fabric after hydrothermal treatment. Doping of silver on TiO₂‐coated fabric and subsequent hydrothermal treatment was found to enhance dye decolorization rate of rhodamine B dye solution in both UV and visible light radiations with respect to undoped TiO₂. The study shows that an optimal level of silver‐doped TiO₂‐coated fabric can be used repeatedly for dye decolorization without significant loss in its photocatalytic activity. The self‐cleaning properties of samples were also studied using methylene blue as a staining agent. It was observed that the presence of 1.8% silver on the weight of titanium in doped samples provides almost 82% of stain degradation.