Synthesis and fluorescent properties of conjugated copolymers containing maleimide and fluorene units at the main chain

Yamamoto or Suzuki–Miyaura coupling polymerizations of 2,3‐diiodo‐N‐cyclohexylmaleimide with fluorene derivatives (2,7‐dibromo‐9,9′‐dihexylfluorene and 9,9′‐dihexylfluorene‐2,7‐diboronic acid) were carried out. The number‐average molecular weights (M_n) of the resulting copolymers were 2600–3500 by gel permeation chromatography analysis. The fluorescence emission of the alternating copolymer showed the emission maxima at 551 nm in THF. On the other hand, the random copolymers showed the bimodal emission peaks at 418–420 and 555–557 nm region, respectively. The fluorescence peaks of the random copolymers on the long wavelength region (555–557 nm) were attributed to the conjugated neighboring N‐cyclohexylmaleimide‐9,9′‐dihexylfluorene units in the polymer main chain. Furthermore, the copolymers exhibited the fluorescence solvatochromism by the difference of the polarity of solvents. The alternating and random copolymers showed the different fluorescence solvatochromism, and the emission colors are distinguishable by the naked eye, respectively. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4945–4956     

Photovoltaic properties of the polymer solar cells comprising crosslinked maleimide polymers and fullerene‐derivative PCBM

A series of crosslinkable maleimide conjugated polymers with different vinyl group contents as side‐chain crosslinking sites have been synthesized by the Suzuki coupling reaction. Polymer solar cells (PSCs) were fabricated based on an interpenetrating network of the crosslinkable maleimide polymers as the electron donor, and a fullerene derivative, (6,6)‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM), as the electron acceptor. The crosslinkable maleimide polymers underwent crosslinking reaction at the side‐chain vinyl groups upon the thermal treatment with or without the addition of initiator, azobisisobutyronitrile (AIBN). Better photovoltaic (PV) performances were obtained for the PSCs based on the polymer crosslinking without using initiator, whereas poorer PV performances were observed for the PSCs based on the polymer crosslinking with the AIBN initiator. In addition, higher operational stability was observed for the crosslinked polymer based solar cell as compared to the solar cell based on the un‐crosslinked polymer. The photo‐physical and PV properties of the cross‐linked maleimide polymers/PCBM based PSCs are discussed in detail as the morphology and crosslinking density of the polymers are taken into account. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and properties of the conjugated polymers with indenoindene and benzimidazole units for organic photovoltaics

A new electron deficient unit, dimethyl‐2H‐benzimidazole (MBI), and dihydroindeno[2,1‐a]indene (ININE) moiety as electron‐rich unit were coupled to synthesize the conjugated polymers containing electron donor–acceptor pair for organic photovoltaics. ININE, MBI, and thiophene (or bithiophene) units were incorporated using Stille and Suzuki polymerization to generate poly(2,7‐(5,5,10,10‐tetrakis(2‐ethylhexyl)‐5,10‐dihydro‐ indeno[2,1‐a]indene)‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2,2‐dimethyl‐2H‐benzimidazole)) (PININEDTMBIs) (or PININEBBTMBIs). In MBI, the sulfur at 2‐position of 2,1,3‐benzothiadiazole (BT) unit was replaced with dialkyl‐substituted carbon, whereas keeping the 1,2‐quinoid form, to improve the solubility of the polymers. The field‐effect hole mobility of PININEBBTMBI was 3.2 × 10^?4 cm²/Vs which was improved as compared to that of PININEDTMBI (2.7 × 10^?5 cm²/Vs) caused by the introduction of bithiophene units. In case of the most efficient polymer, PININEBBTMBI, the device with the configuration of indium tin oxide (ITO)/poly(3,4‐ethylenedioxythiophene) (PEDOT):polystyrene sulfonate (PSS)/polymer:PC₇₁BM(1:4 w/w)/Al, annealed at 100 °C for 10 min demonstrated a open circuit voltage of 0.78 V, a short‐circuit current density of 6.66 mA/cm², and a fill factor of 0.41, leading to the power conversion efficiency of 2.11%, under white‐light illumination (AM 1.5 G, 100 mW/cm²). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis,optical and electrochemical properties of arylenevinylene‐based π‐conjugated polymers with imidazolium units in the main chain

Arylenevinylene‐based π‐conjugated polymers containing imidazolium cationic units in the main chain and their model compounds were synthesized and characterized in terms of optical and electrochemical properties. 9,9‐Bisoctylfluorene, 2,5‐bisdodecyloxybenzene, and 3‐dodecylthiophene were introduced as arylene units with different donor characteristics to evaluate the effect on the highest occupied molecular orbital‐lowest unoccupied molecular orbital (HOMO‐LUMO) gap energy. The UV–vis and fluorescence spectra of cationic polymers and model compounds with iodide counter anion exhibited a significant blue shift with respect to the parent neutral molecules. X‐ray single crystal analysis for model compounds revealed that the effective π‐conjugation length of cationic model compounds decreased compared to the neutral model compounds by means of twisted conformation directed by CH‐π interactions between N‐methyl groups of imidazolium and neighboring aryl units. The cyclic voltammetry measurement suggested the negative shift of LUMO levels by the conversion of imidazole to imidazolium, indicating the electron‐accepting characteristics of cationic imidazolium unit. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of π‐conjugated polymer containing both thiophene and phosphole sulfide in the main chain by simultaneous post‐element transformation of organotitanium polymer

The synthesis and unique optoelectronic features of a π‐conjugated polymer containing both thiophene and 1‐phenylphosphole sulfide units (multiple heteroles) in the main chain by the post‐element transformation of a regioregular organometallic polymer possessing titanacyclopentadiene‐2,5‐diyl unit are described. The π‐conjugated polymer containing multiple heteroles was obtained in 73% yield by the simultaneous reaction of the organotitanium polymer with sulfur monochloride and dichlorophenylphosphine (0.6 equiv each), whose number‐average molecular weight (M_n) and the molecular‐weight distribution (M_w/M_n) were estimated to be 11,000 and 3.4, respectively, by the size exclusion chromatography (SEC). The π‐conjugated polymer thus obtained was found to have the high HOMO and the low LUMO energy levels due to the electron‐rich thiophene and electron‐deficient phosphole sulfide units, respectively, as supported by its cyclic voltammetry (CV) analysis. Compared to a mixture of a polymer containing sole thiophene‐unit and that containing sole phosphole sulfide units, the π‐conjugated polymer‐containing multiple heteroles proved to exhibit interesting optical properties. For example, a specific emission peak was observed at 608 nm in the photoluminescence spectrum, which was not observed in the case of the thiophene‐containing polymer, the phosphole‐containing polymer, and their mixture. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2519–2525     

Synthesis and properties of conjugated polymers containing 3,9‐ and 2,9‐linked carbazole units in the main chain

Novel conjugated polymers containing 3,9‐ or 2,9‐linked carbazole units in the main chain were synthesized by the polycondensation of ethynyl‐ and iodo‐substituted 9‐arylenecarbazolylene monomers, and their optical and electrical properties were studied. Polymers with weight‐average molecular weights of 3400–12,000 were obtained in 76–99% yields by the Sonogashira coupling polycondensation in piperidine or tetrahydrofuran (THF)/piperidine at 30 °C for 48 h. All the 3,9‐linked polymers absorbed light around 300 nm. The para‐phenylene‐linked polymer also absorbed light around 350 nm, while meta‐phenylene‐linked one did not. The 3,9‐linked polymers absorbed light at a wavelength longer than the 2,9‐linked one. The polymers emitted blue fluorescence with high quantum yields (0.21–0.78) upon excitation at the absorption maxima. The polymers were oxidized around 0.6 V, and reduced around 0.5 V. Poly( 1 ) showed the dark conductivity of 3.7 × 10^?11 S/cm (10³ V/cm). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3506–3517, 2009     

Synthesis of conjugated copolymers containing phenothiazinylene vinylene moieties and their electrooptic properties

Four different types of conjugated copolymers, consisting of alternating structures of phenothiazinylene vinylene and phenylene vinylene derivatives such as phenylene vinylene, 1,1′‐biphenyl‐4,4′‐ylene vinylene, 2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐phenylene vinylene, and 9,10‐anthrylene vinylene, were prepared by Horner–Emmons condensation between appropriate diphosphonates and dialdehydes. Single‐layer and double‐layer light‐emitting diodes were fabricated with the synthesized conjugated polymers, and their electroluminescent properties were investigated. Poly(N‐2‐ethylhexyl‐3,6‐phenothiazinylene vinylene‐alt‐9,10‐anthrylene vinylene), containing phenothiazinylene vinylene and anthrylene vinylene as repeat units, emitted a reddish‐orange color with Commission Internationale de l'Eclairage coordinates of x = 0.6173 and y = 0.3814 that was very similar to the National Television System Committee standard red, and it showed a bipolar carrier‐injection/transporting capability caused by electron‐withdrawing anthracene and electron‐donating amino groups. Poly[N‐2‐ethylhexyl‐3,6‐phenothiazinylene vinylene‐alt‐2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐phenylene vinylene], containing phenothiazinylene vinylene and dialkoxy phenylene vinylene moieties, showed excellent hole‐injection/transporting capability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2502–2511, 2003     

Synthesis and characterization of conjugated polymer containing azobenzene and oxadiazole units

A novel conjugated polymer containing azobenzene and oxadiazole units was synthesized through multi-step synthesis.The structures and properties of monomer and polymer were characterized and evaluated with IR,1H NMR,UV,TGA and GPC,respectively.Polymer with long side chain of alkoxy shows good solubility,thermal stability and photoisomerization property.     

Synthesis of conjugated polymers with azobenzene moieties in the main chain

Poly(phenylenevinylene)‐based conjugated polymers with azobenzene groups in the main chains were prepared by the Pd‐catalyzed coupling polymerization of divinylarenes with dihaloarenes. The Pd‐catalyzed coupling polymerization of 4,4′‐divinylazobenzene with dihaloarenes such as 1,3‐dibromobenzene, 1,4‐dibromo‐2,5‐dihexylbenzene, 4,4′‐dibromoazobenzene, and 4,4′‐diiodoazobenzene resulted in polymers with poor solubility. In contrast, soluble polymers containing azobenzene moieties in the main chains were attainable from divinylbenzenes with 4,4′‐dihaloazobenzenes if either or both of the monomers possessed hexyl groups on the aromatic rings. The number‐average molecular weight of the polymer exceeded 10,000 under optimized conditions, and the polymer showed a remarkably redshifted absorption in the visible region (456 nm). ¹H NMR and IR spectra supported that the polymers having only trans‐geometry for the double bonds. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1057–1063, 2000     

First synthesis of the bismole‐containing conjugated polymer

We successfully synthesized the first conjugated polymer containing a bismuth atom in the conjugated main chain by incorporating a bismuth atom into the cyclopentadiene framework (bismole), which was constructed by a polymer reaction. A synthetic procedure and characterization of the obtained polymers were discussed. This bismole‐containing conjugated polymer exhibited moderate bluish green photoluminescence in solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4857–4863, 2006     

Synthesis and properties of conjugated polymers containing 3,9‐carbazolylene and silylenevinylene moieties in the main chain

Novel conjugated polymers containing 3,9‐carbazolylene and silylenevinylene moieties were synthesized by the hydrosilylation polymerization of 1,4‐bis(3‐ethynyl‐9‐carbazolyl)benzene ( 1 ) with various bis(hydrosilane)s or dihydrosilanes using a rhodium catalyst. Polymers with weight‐average molecular weights ranging from 5400 to 20,000 were obtained in 55–97% yields by the polyaddition with a rhodium catalyst in toluene at 25 °C for 24 h. All the polymers were soluble in CHCl₃ and THF, and had predominantly trans‐structures. The polymers exhibited λ_max at a longer wavelength region than 1 , and emitted fluorescence in 14–50% quantumn yields. The polymers were oxidized and reduced in the region of 0.4–1.6 V, and thermally stable up to 200 °C under air. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1815–1821, 2010     

Bisphosphonate units in the main polymer chain: The first synthesis

Radical copolymerization of tetraethyl vinylidene phosphonate ( B ) with vinyl monomers has been described for the first time. In copolymerization with vinyl acetate ( V ) strictly alternating copolymer was formed even when [ V ]₀/[ B ]₀ was equal to 80. In copolymerization with acrylic acid ( A ) copolymers of the general structure ‐[( B )₁ A _x)]_n‐ were formed. The number of A units (x) was shown to depend on the [ A ]₀/[ B ]₀ ratio in the monomers feed. The reactivity ratio r_A was determined as equal to 2.1 and on this basis, the distribution of x as a function of [ A ]₀/[ B ]₀ was found. Bisphosphonic units were deblocked and the corresponding polyacids were analyzed by NMR spectra. M_n > 0.5 × 10⁶ were measured by SEC for copolymers of B with A . © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and optoelectronic properties of conjugated polymers based on a dithienobenzimidazole unit in the main chain

Three conjugated polymers with the dithienobenzimidazole (DTBIm) unit ( P1 , P3 , and P4 ) and one conjugated polymer with the dithienobenzoxazole unit ( P2 ) were synthesized by the cross‐coupling polymerization. The absorption maxima showed a red‐shift in the order of P3 (406 nm), P2 (426 nm), P1 (438 nm), and P4 (450 nm), which was studied in detail using the frontier molecular orbital calculation of the model compounds. The energy levels of the highest occupied molecular orbital and the lowest unoccupied molecular orbital of the DTBIm unit‐containing conjugated polymers were estimated by the cyclic voltammetry. The transformation from DTBIm ( P4 ) to dithienobenzimidazolium ( P4' ) was also carried out to shift the absorption maxima of P4' (454 nm) by promoting the intramolecular charge transfer between the DTBIm and thiophene units. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 401–409     

Synthesis and applications of low‐bandgap conjugated polymers containing phenothiazine donor and various benzodiazole acceptors for polymer solar cells

A series of soluble donor‐acceptor conjugated polymers comprising of phenothiazine donor and various benzodiazole acceptors (i.e., benzothiadiazole, benzoselenodiazole, and benzoxadiazole) sandwiched between hexyl‐thiophene linkers were designed, synthesized, and used for the fabrication of polymer solar cells (PSC). The effects of the benzodiazole acceptors on the thermal, optical, electrochemical, and photovoltaic properties of these low‐bandgap (LBG) polymers were investigated. These LBG polymers possessed large molecular weight (M_n) in the range of 3.85?5.13 × 10⁴ with high thermal decomposition temperatures, which demonstrated broad absorption in the region of 300?750 nm with optical bandgaps of 1.80?1.93 eV. Both the HOMO energy level (?5.38 to ?5.47 eV) and LUMO energy level (?3.47 to ?3.60 eV) of the LBG polymers were within the desirable range of ideal energy level. Under 100 mW/cm² of AM 1.5 white‐light illumination, bulk heterojunction PSC devices containing an active layer of electron donor polymers mixed with electron acceptor [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) or [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) in different weight ratios were investigated. The best performance of the PSC device was obtained by using polymer PP6DHTBT as an electron donor and PC₇₁BM as an acceptor in the weight ratio of 1:4, and a power conversion efficiency value of 1.20%, an open‐circuit voltage (V_oc) value of 0.75 V, a short‐circuit current (J_sc) value of 4.60 mA/cm², and a fill factor (FF) value of 35.0% were achieved. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of polyyne polymer containing nickel in the main chain

The synthesis of the nickel dialkynyl complex Ni(C?C? C₆H₄? C?CH)₂(PPh₃)₂ and of the corresponding polyyne polymer containing nickel in the main chain ? [Ni(PPh₃)₂? C?C? C₆H₄? C?C? ]_n are described and discussed. A new mixed solvent system DMSO/HNEt₂ and homogeneous step-wise condensation method used for their synthesis are presented for the first time. The Ni-polyyne polymer obtained is dark yellow powder and soluble in THF or CH₂Cl₂. Its M?_w is about 10⁴, and the MWD is less than 2. Both the prepared complex and polymer have been characterized by IR, UV, ¹H-NMR, and DTA. Preliminary results on photoluminesence of nickel polyyne polymers are present. © 1995 John Wiley & Sons, Inc.     

Synthesis,characterization, and properties of regioregular conjugated polymers containing quaterthiophene and an acceptor repeating units

Novel donor–acceptor type polymers consisting of alternating quaterthiophene and an electron withdrawing moiety, pyrazinyl or pyridinyl, have been prepared using Stille coupling approach with moderate yields. The polymers were highly soluble in common organic solvents such as tetrahydrofuran and chloroform. The structure and optical properties of the polymers were characterized by NMR, UV‐vis and fluorescence spectroscopy, and cyclic voltammetry, respectively. The polymer having pyrazine unit exhibited a red‐shift in both absorption and emission in comparison with those analogs containing pyridine because of strong electron withdrawing character of the pyrazinyl group. The polymer containing pyrazinyl as acceptor units also depicted decrease in its optical and electrochemical bandgap relative to those polymers containing 2,5‐ or 2,6‐pyridine moieties. The electrochemical behavior showed facile n‐doping and p‐doping properties of those polymers consisting of alternating quaterthiophene and the acceptor moiety. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2163–2171, 2009     

Synthesis of optically active conjugated polymers containing platinum in the main chain: Control of the higher‐order structures by substituents and solvents

The Sonogashira–Hagihara coupling polymerization of d ‐hydroxyphenylglycine‐derived diiodo monomers 1–4 and platinum‐containing diethynyl monomer 5 gave the corresponding polymers [poly( 1–5 )–( 2–5 )] with number‐average molecular weights of 19,000–25,000 quantitatively. The polymers were soluble in CHCl₃, CH₂Cl₂, THF, and DMF. CD and UV–vis spectroscopic analysis revealed that amide‐substituted polymers [poly( 1–5 ) and poly( 2–5 )] formed chiral higher‐order structures in solution, while ester‐substituted polymers [poly( 3–5 ) and poly( 4–5 )] did not. Poly( 1–5 ) formed one‐handed helices in THF/toluene mixtures, while it formed chiral aggregates in THF/MeOH mixtures. Poly( 1–5 ) emitted fluorescence with quantum yields ranging from 0.8 to 1.3%. The polymers usually aggregated in the solid state. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2452–2461     

Synthesis of polymer containing o-nitrobenzyl ether structure in the main chain

The polycondensation of nitrated xylenedihalides with diphenols was carried out under various conditions. The polycondensation of 2-nitro-1, 3-xylylenedibromide (NXDB) with 4,4′-isopropylidenediphenol proceeded in competition with the decomposition of polymer in the mixed solvent of tetrahydrofuran (THF) and dimethylsulfoxide (DMSO). The viscosity of the resulting polymer was markedly affected by the concentration of aqueous sodium hydroxide, reaction time, and reaction temperature. When dibromomethane was used as a solvent, the polycondensation proceeded very smoothly without the decomposition to give a higher reduced viscosity polymer than that in THF-DMSO at 60°C. The polymer obtained in dibromomethane contained a very small amount of formal bonds determined from the ¹H-NMR spectrum. The formation of formal bonds seems to cause the molecular weight in increase. Furthemore, the polycondensation of NXDB with 2,2-bis (4-hydroxyphenyl) hexafluoropropane afforded high molecular-weight polyether in dibromomethane. However, either high reaction temperatures or the high concentrations of aqueous potassium hydroxide solution casused the viscosity of the resulting polymer to decrease during the polycondensation in dibromomethane. The obtained polyethers with o-nitrobenzyl groups showed relatively good solubility, and decomposed smoothly upon the irradiation with UV light. Therefore, these polymers might be useful for positive type photoresists.     

Synthesis and characterization of highly soluble fluorescent main chain copolyimides containing perylene units

A series of high molecular weight copolyimides containing various amount of perylene units in the main chain have been synthesized. The polymers were characterized by FT-IR, NMR, UV/Vis, fluorescence spectroscopy, gel permeation chromatography, differential scanning calorimetry and thermogravimetric analysis measurements. They are highly soluble in conventional solvents such as CHCl₃, THF, cyclohexanone etc. and form optically transparent films by solution casting or spin coating. The incorporation of various amount of perylene units in the main chain allows the control of the fluorescence intensity in solution and in solid thin films. The copolyimide containing 0.28 mol% perylene units exhibits the highest solid-state fluorescence. The observed fluorescence intensities of the copolyimides in solid state film decreased with the increasing amount of perylene units in the main chain when the mole ratio of perylene units greater than 0.28 mol% indicating the aggregation of chromophores. The copolyimides are thermally stable up to 400 °C and exhibit glass transition temperatures in the range of 340-360 °C. The number average molecule weight ranges from 1.72×10⁴ to 1.25×10⁵ and the molecule weight distribution mediated between 1.9 and 2.4.     

Synthesis and photophysical properties of polyethylene containing pyrenyl units in the side chain

Copolymerization of ethylene and diallyl‐bis(pyren‐1‐yl)‐silane (APyS) was investigated with zirconocene catalysts, rac‐ethylenebis(indenyl)zirconium dichloride ( 1 ) and diphenylmethylene(cyclopentadienyl)(9‐fluorenyl)zirconium dichloride ( 2 ), using methylaluminoxane as a cocatalyst. APyS was copolymerized via both 1,2‐insertion and cyclization insertion, and cyclization selectivity, ratio of cyclized insertion unit, of APyS in the copolymers obtained with Catalyst 1 was higher than that obtained with Catalyst 2 . Catalyst 2 showed a higher reactivity for APyS than Catalyst 1 . Photophysical properties of the copolymer were investigated by UV–vis and photoluminescence (PL) spectroscopy, and absorption and fluorescence derived from pyrenyl groups were detected in the copolymers. Chloroform solution of the copolymer showed emission derived from both monomer and eximer of pyrenyl units. Only the emission derived from eximer of pyrenyl units was observed in the cast film. The polarized PL spectrum of an oriented film showed anisotropy, and the polarization excitation parallel to the drawing direction showed high fluorescence intensity. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012