Synthesis and Characterization of 3,3′‐Bis(Dinitromethyl)‐5,5′‐Azo‐1H‐1,2,4‐Triazole

The synthesis of 3,3′‐bis(dinitromethyl)‐5,5′‐azo‐1H‐1,2,4‐triazole ( 5 ) using the readily available starting material 2‐(5‐amino‐1H‐1,2,4‐triazol‐3‐yl)acetic acid ( 1 ) is described. All compounds were characterized by means of NMR, IR, and Raman spectroscopy. The energetic compound 5 was additionally characterized by single‐crystal X‐ray diffraction and DSC measurements. The sensitivities towards impact, friction and electrical discharge were determined. In addition, detonation parameters (e.g. heat of explosion, detonation velocity) of the target compound were computed using the EXPLO5 code based on the calculated (CBS‐4M) heat of formation and X‐ray density.     

Synthesis and Characterization of Salts of the 3,6‐Dinitro‐[1,2,4]triazolo[4,3‐b][1,2,4]triazolate Anion: Insensitive Energetic Materials Available From Economical Precursors

In this work, the treatment of 3,6,7‐triamino‐[1,2,4]triazolo[4,3‐b][1,2,4]triazole (TATOT)^[1] with sulfuric acid and sodium nitrite results in elimination of the N‐amine and the formation of the new energetic anion 3,6‐dinitro‐[1,2,4]triazolo[4,3‐b][1,2,4]triazolate (DNTT) via nitro‐Sandmeyer chemistry. This new energetic anion is available in a convenient and inexpensive three‐step process from inexpensive commercial starting materials. Several nitrogen rich salts of this material have been prepared and their chemical (infrared, Raman, NMR, single‐crystal X‐ray) and energetic (impact, friction, thermal) properties determined. As a rule, this class of energetic salts are insensitive energetic materials.     

Synthesis,Crystal Structure,and Thermal Behavior of a Novel Insensitive Energetic Cocrystal Composed of 3,3′‐Bis(1,2,4‐oxadiazole)‐5,5′‐dione and 4‐Amino‐1,2,4‐triazole

A novel insensitive energetic cocrystal consisting of 3,3′‐bis(1,2,4‐oxadiazole)‐5,5′‐dione and 4‐amino‐1,2,4‐triazole in a 1:2 molar ratio was prepared and characterized. The structure of this cocrystal was characterized by single‐crystal X‐ray diffraction. The crystal structure of the cocrystal is a monoclinic system with P1 space group. Properties of the cocrystal studied included thermal decomposition and detonation performance. This cocrystal has a crystal density of 1.689 g · cm^–3 at 173 K and good detonation performance (D = 6940 m · s^–1, P = 20.9 GPa). Moreover, measured impact and friction sensitivities (IS > 40 J, FS > 360 N) show that it can be classified as an insensitive energetic material. Its thermodynamic properties indicate that it has moderate thermal stability with a sharp exothermic peak (244 °C, 5 K · min^–1) and a high critical temperature of thermal explosion (523 K). In view of the observations above, it may serve as a promising alternative to known explosives such as TNT.     

Synthesis and Characterization of Energetic Salts of the (C4N122–) Dianion

3, 6‐Bis(tetrazol‐5‐yl)‐1, 2, 4, 5‐tetrazine is a nitrogen‐rich energetic compound readily prepared and a strong dibasic acid. By the reaction with energetic bases such including hydroxylamine, triaminoguanidine, hydrazine, and diaminourea, multiple ionic energetic materials were prepared and characterized for the first time. Both chemical (multinuclear NMR, Infrared, Raman, MS, etc) as well as explosive (Impact, Friction, Static sensitivities) properties are reported. The materials prepared, with the exception of the silver salt, which is a primary explosive, fall into the classification of low‐sensitivity energetic materials due to desensitizing hydration waters. Calculated explosive performances using the EXPLO5 computer code are also reported.     

Syntheses and Promising Properties of Dense Energetic 5,5′‐Dinitramino‐3,3′‐azo‐1,2,4‐oxadiazole and Its Salts

A planar energetic molecule with high density, 5,5′‐dinitramino‐3,3′‐azo‐1,2,4‐oxadiazole ( 4 ), was obtained by the nitration of 5,5′‐diamino‐3,3′‐azo‐1,2,4‐oxadiazole using 100 % nitric acid. In addition, selected nitrogen‐rich salts were prepared. Of them, the neutral compound 4 and its hydroxylammonium salt, 6 , were further confirmed by single‐crystal X‐ray diffraction. Physicochemical and energetic properties including density, thermal stability, and sensitivity were investigated. The energetic performance from the calculated heats of formation and experimental densities indicates that many of them have potential applications as energetic materials.     

Energetic Salts Based on Monoanions of N,N‐Bis(1H‐tetrazol‐5‐yl)amine and 5,5′‐Bis(tetrazole)

High‐density energetic salts that contain nitrogen‐rich cations and the 5‐(tetrazol‐5‐ylamino)tetrazolate (HBTA^?) or the 5‐(tetrazol‐5‐yl)tetrazolate (HBT^?) anion were readily synthesized by the metathesis reactions of sulfate salts with barium compounds, such as bis[5‐(tetrazol‐5‐ylamino)tetrazolate] (Ba(HBTA)₂), barium iminobis(5‐tetrazolate) (BaBTA), or barium 5,5′‐bis(tetrazolate) (BaBT) in aqueous solution. All salts were fully characterized by IR spectroscopy, multinuclear (¹H, ¹³C, ¹⁵N) NMR spectroscopy, elemental analyses, density, differential scanning calorimetry (DSC), and impact sensitivity. Ba(HBTA)₂ ? 4 H₂O crystallizes in the triclinic space group P$\bar 1$ , as determined by single‐crystal X‐ray diffraction, with a density of 2.177 g cm^?3. The densities of the other organic energetic salts range between 1.55 and 1.75 g cm^?3 as measured by a gas pycnometer. The detonation pressure (P) values calculated for these salts range from 19.4 to 33.6 GPa, and the detonation velocities (ν_D) range from 7677 to 9487 m s^?1, which make them competitive energetic materials. Solid‐state ¹³C NMR spectroscopy was used as an effective technique to determine the structure of the products that were obtained from the metathesis reactions of biguanidinium sulfate with barium iminobis(5‐tetrazolate) (BaBTA). Thus, the structure was determined as an HBTA salt by the comparison of its solid‐state ¹³C NMR spectroscopy with those of ammonium 5‐(tetrazol‐5‐ylamino)tetrazolate (AHBTA) and diammonium iminobis(5‐tetrazolate) (A₂BTA).     

Bis(nitroamino‐1,2,4‐triazolates): N‐Bridging Strategy Toward Insensitive Energetic Materials

Modern energetic motifs for military and civilian applications are most often evaluated using various criteria, for example, energetic properties, production costs, and safety issues. Given this background, the design of energetic materials requires a deep understanding of both detonation performance and molecular stability. Here a new family of energetic bis(nitroamino‐1,2,4‐triazolates), which exhibit good thermal stabilities, excellent detonation properties, and low sensitivities, has been designed. Furthermore, two hydroxylammonium bis(azolates) with pyrazole and tetrazole backbones were synthesized, and they exhibit energetic properties analogous to the triazoles. This work highlights the application potential of N‐bridged bis(azolates) as promising energetic materials.     

5,5′‐Hydrazinebistetrazole: An Oxidation‐stable Nitrogen‐rich Compound and Starting Material for the Synthesis of 5,5′‐Azobistetrazolates

All 5,5′‐hydrazinebistetrazoles reported in the literature are sensitive to oxidation and react with atmospheric oxygen to yield the corresponding 5,5′‐azobistetrazolates on time. Herewith, we report on the synthesis of the free acid 5,5′‐hydrazinebistetrazole (HBT) which showed to be stable on air for extended periods of time. The compound was fully characterized by analytical and spectroscopic methods and its X‐ray structure was determined by diffraction techniques. Besides, we determined its explosive properties by BAM methods and calculated its heat of formation (+414 kJ mol^?1), detonation velocity (8523 m s^?1) and detonation pressure (27.7 GPa). HBT proved to be very safe to handle (impact sensitivity: >30 J, friction sensitivity: ～108 N) and was used as a starting material for the synthesis of some already reported 5,5′‐azobistetrazolates: NH₄⁺, NH₂NH₃⁺, Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺.     

Synthesis,Crystal Structure,and Properties of Energetic Complex Magnesium 5,5′‐Dinitramino‐3,3′‐bi[1,2,4‐triazolate] Hexahydrate

Alkaline Earth metal (Mg) energetic complex with 5,5′‐dinitramino‐3,3′‐bi[1,2,4‐triazolate] dihydrate (DNABT) has been synthesized and structurally characterized by FTIR spectroscopy, elemental analysis, and single X‐ray diffraction. The thermal decomposition processes of the complex and DNABT were studied by means of the TDA‐TG technologies. Sensitivity tests reveal that the complex is more insensitive to mechanical stimuli than DNABT. Combustion behavior shows that 1 has good color performances.     

Maximum Compaction of Ionic Organic Explosives: Bis(hydroxylammonium) 5,5′‐Dinitromethyl‐3,3′‐bis(1,2,4‐oxadiazolate) and its Derivatives

Within this contribution on bis(oxadiazoles) we report on bis‐hydroxylammonium 5,5′‐dinitro‐methyl‐3,3′‐bis(1,2,4‐oxadiazolate), which (to the best of our knowledge) shows the highest density (2.00 g cm^?3 at 92 K, 1.95 g cm^?3 at RT) ever reported for an ionic CHNO explosive. Also the corresponding bis(ammonium) salt shows an outstanding density of 1.95 g cm^?3 (173 K). The reaction of the 3,3′‐bis(1,2,4‐oxadiazolyl)‐5,5′‐bis(2,2′‐dinitro)‐diacetic acid diethyl ester with different nitrogen‐rich bases, such as ammonia, hydrazine, hydroxylamine, and triaminoguanidine causes decarboxylation followed by the formation of the corresponding salts (cation/anion stoichiometry 2:1). The reactions are performed at ambient temperature in H₂O/MeOH mixtures and furnish qualitatively pure products showing characteristics of typical secondary explosives. The obtained compounds were characterized by multinuclear NMR spectroscopy, IR and Raman spectroscopy, as well as mass spectrometry. Single‐crystal X‐ray diffraction studies were performed and the structures of all compounds were determined at low temperatures. The thermal stability was measured by differential scanning calorimetry (DSC). The sensitivities were explored by using the BAM drophammer and friction test. The heats of formation were calculated by the atomization method based on CBS‐4M enthalpies. With these values and the X‐ray densities, several detonation parameters such as the detonation pressure, velocity, energy, and temperature were computed using the EXPLO5 code.     

Energetic Materials Based on 5,5′‐Diamino‐4,4′‐dinitramino‐3,3′‐bi‐1,2,4‐triazole

A simple and straightforward synthesis of 5,5′‐diamino‐4,4′‐dinitramino‐3,3′‐bi‐1,2,4‐triazole by the selective nitration of 4,4′,5,5′‐tetraamino‐3,3′‐bi‐1,2,4‐triazole is presented. The interaction of the amino and nitramino groups improves the energetic properties of this functionalized bitriazole. For a deeper investigation of these properties, various nitrogen‐rich derivatives were synthesized. The new compounds were investigated and characterized by spectroscopy (¹H and ¹³C NMR, IR, Raman), elemental analysis, mass spectrometry, differential thermal analysis (DTA), X‐ray analysis, and impact and friction sensitivities (IS, FS). X‐ray analyses were performed and deliver insight into structural characteristics with which the stability of the compounds can be explained. The standard enthalpies of formation were calculated for all compounds at the CBS‐4M level of theory, revealing highly positive heats of formation. The energetic performance of the new molecules was predicted with the EXPLO5 V6.02 computer. A small‐scale shock reactivity test (SSRT) and a toxicity test gave a first impression of the performance and toxicity of selective compounds.     

Magnesium Azotetrazole‐1,1′‐dioxide: Synthesis and Promising Properties of Green Insensitive Energetic Materials

Magnesium azotetrazole‐1,1′‐dioxide ( 1 ) was first prepared and intensively characterized by single‐crystal X‐ray diffraction, IR spectroscopy, mass spectrometry, elemental analysis, and DSC measurements. The heat of formation was calculated using the atomization energy method based on quantum chemistry and the heat of detonation was also predicted. The NBO analysis was performed for inspecting charge distributions. The sensitivities towards impact and friction were tested using the BAM standard. The high detonation performance (5289 kJ · kg^–1), good thermal stabilities (245.5 °C) and excellent insensitivity (39.2 J and >360 N) as well as clean decomposition products supports it of great interest as a promising candidate of green insensitive energetic materials.     

Metal Salts of 3,3′‐Diamino‐4,4′‐dinitramino‐5,5′‐bi‐1,2,4‐triazole in Pyrotechnic Compositions

The synthesis of alkali and alkaline earth salts of 3,3′‐diamino‐4,4′‐dinitramino‐5,5′‐bi‐1,2,4‐triazole (H₂ANAT) is reported. The fast and convenient three steps reaction toward the target compounds does not require any organic solvents. In addition to an intensive characterization of all synthesized metal salts, the focus was on developing chlorine and nitrate‐free red‐light‐generating pyrotechnical formulations. Strontium 3,3′‐diamino‐4,4′‐dinitramino‐5,5′‐bitriazolate hexahydrate served as colorant and oxidizer in one molecule. The energetic properties of all developed pyrotechnical formulations assure safe handling and manufacturing.     

Energetic 4,4′‐Oxybis[3,3′‐(1‐hydroxytetrazolyl)]furazan and Its Salts

Energetic compounds that incorporate multiple nitrogen‐rich heterocycles are of great interest for high‐density energetic materials. A facile synthetic strategy to combine an oxy bridge and furazan groups, as well as tetrazole‐ols, into a molecule ( 5 ) was found. Some energetic salts based on 5 were prepared by neutralization. All of the compounds were fully characterized. Additionally, the structure of 7 has been elucidated by single‐crystal XRD analysis. Physicochemical and energetic properties were also studied; these show that these newly designed energetic salts exhibit good thermal stabilities. Hydroxylammonium salt ( 6 ) has a detonation performance and sensitivities comparable with those of 1,3,5‐trinitroperhydro‐1,3,5‐triazine (RDX).     

Energetic Materials with Promising Properties: Synthesis and Characterization of 4,4′‐Bis(5‐nitro‐1,2,3‐2H‐triazole) Derivatives

Using a variety of functionalization strategies, derivatives of 4, 4′‐bis(5‐nitro‐1,2,3‐2H‐triazole) were designed, synthesized, and characterized. The isomers were separated, their structures were confirmed with single‐crystal X‐ray analysis, and their properties were determined by differential scanning calorimetry, density, impact sensitivity, heat of formation, and detonation velocity and pressure (calculated by EXPLO5 V6.01). Those materials were found to exhibit superior detonation performance when compared with the other fully carbon‐nitrated bis(azoles).     

Synthesis and Characterization of 5‐(1,2,4‐Triazol‐3‐yl)tetrazoles with Various Energetic Functionalities

In this contribution the synthesis and full structural as well as spectroscopic characterization of three 5‐(1,2,4‐triazol‐3‐yl)tetrazoles along with selected energetic moieties like nitro, nitrimino, and azido groups are presented. The main goal is a comparative study on the influence of those variable energetic moieties on structural and energetic properties. A complete characterization including IR and Raman as well as multinuclear NMR spectroscopy of all compounds is presented. Additionally, X‐ray crystallographic measurements were performed and reveal insights into structural characteristics as well as inter‐ and intramolecular interactions. The standard enthalpies of formation were calculated for all compounds at the CBS‐4M level of theory and reveal high positive heats of formation for all compounds. The calculated detonation parameters (using the EXPLO5.05 program) are in the range of 8000 m s^?1 (8097 m s^?1 ( 5 ), 8020 m s^?1 ( 6 ), 7874 m s^?1 ( 7 )). As expected, the measured impact and friction sensitivities as well as decomposition temperatures strongly depend on the energetic moiety at the triazole ring. The C? C connection of a triazole ring with its opportunity to introduce a large variety of energetic moieties and a tetrazole ring, implying a large energy content, leads to the selective synthesis of primary and secondary explosives.     

New Nitriminotetrazoles – Synthesis,Structures and Characterization

The reactions of 5‐nitriminotetrazole ( 4 ) with 1‐methyl‐5‐aminotetrazole ( 2 ) as well as 2‐methyl‐5‐aminotetrazole ( 3 ) were investigated. In the first reaction 2 was protonated yielding 1‐methyl‐5‐aminotetrazolium 5‐nitrimino‐1H‐tetrazolate monohydrate ( 7 ). In the latter case no protonation could be observed and a co‐crystallization of 5‐nitraminotetrazole and 2‐methyl‐5‐aminotetrazole was obtained. In this compound a new tautomer of 4 could be found. Both products were determined by low temperature single crystal X‐ray diffraction, IR, Raman and multinuclear (¹H, ¹³C, ¹⁵N) NMR spectroscopy, elemental analysis as well as differential scanning calorimetry. In addition the heats of formation were calculated using experimentally obtained heats of combustion. With these and the X‐ray densities several detonation parameter were computed using the EXPLO5 software. In addition the sensitivities towards impact, friction and electrostatic discharge were determined. Further, two crystal structures of the important starting materials in energetic research 5‐nitriminotetrazole monohydrate ( 4 ·H₂O) and 1‐methyl‐5‐nitriminotetrazolemonohydrate ( 5 ·H₂O) are presented and compared with the water‐free compounds. The heats of formation of 4 , 4 ·H₂O, 5 , 5 ·H₂O have been calculated by the atomization method using the CBS basis set. Inclusion of crystal water decrease heats of formation about 265 kJ mol^?1. Also the influence of crystal water on sensitivities (impact, friction, electrostatic discharge) but also performance is discussed.     

Nitration Products of 5‐Amino‐1H‐tetrazole and Methyl‐5‐amino‐1H‐tetrazoles – Structures and Properties of Promising Energetic Materials

The nitration of 5‐amino‐1H‐tetrazole ( 1 ), 5‐amino‐1‐methyl‐1H‐tetrazole ( 3 ), and 5‐amino‐2‐methyl‐2H‐tetrazole ( 4 ) with HNO₃ (100%) was undertaken, and the corresponding products 5‐(nitrimino)‐1H‐tetrazole ( 2 ), 1‐methyl‐5‐(nitrimino)‐1H‐tetrazole ( 5 ), and 2‐methyl‐5‐(nitramino)‐2H‐tetrazole ( 6 ) were characterized comprehensively using vibrational (IR and Raman) spectroscopy, multinuclear (¹H, ¹³C, ¹⁴N, and ¹⁵N) NMR spectroscopy, mass spectrometry, and elemental analysis. The molecular structures in the crystalline state were determined by single‐crystal X‐ray diffraction. The thermodynamic properties and thermal behavior were investigated by using differential scanning calorimetry (DSC), and the heats of formation were determined by bomb calorimetric measurements. Compounds 2, 5 , and 6 were all found to be endothermic compounds. The thermal decompositions were investigated by gas‐phase IR spectroscopy as well as DSC experiments. The heats of explosion, the detonation pressures, and velocities were calculated with the software EXPLO5, whereby the calculated values are similar to those of common explosives such as TNT and RDX. In addition, the sensitivities were tested by BAM methods (drophammer and friction) and correlated to the calculated electrostatic potentials. The explosion performance of 5 was investigated by Koenen steel sleeve test, whereby a higher explosion power compared to RDX was reached. Finally, the long‐term stabilities at higher temperatures were tested by thermal safety calorimetry (FlexyTSC). X‐Ray crystallography of monoclinic 2 and 6 , and orthorhombic 5 was performed.