Examination and analysis of Indian silver punch‐marked coins employing WD‐XRF and other noninvasive techniques

The archaeometallurgical analysis of ancient silver coins provides useful information regarding fabrication methodology, provenance, and trade route and explains large diversification in elementary composition, weight, and physical features. The present investigation deals with the chemical analysis and examination of the processing history of Indian punch‐marked silver coins dating to 400–200 bc . The chemical analysis was carried out by wavelength dispersive X‐ray fluorescence and X‐ray Diffraction (XRD). The microstructural examination was performed using field emission scanning electron microscope (FE‐SEM) and different phases were identified by Scanning Electron Microscopy coupled with Energy Dispersive X‐ray (SEM‐EDX) Spectroscopy. It was observed that all eight coins were manufactured with silver‐copper alloy. The ore used for obtaining silver was argentiferous galena, and cupellation was carried with perfection. The absence of slag inclusions as revealed by SEM examination indicated that coins (numbers 2, 4, 5, and 7) were cast from a molten state. The presence of Cu₂O, CuO, and Ag₂O on the surfaces of the coins was confirmed by XRD. The formed oxide layers provided protection and saved the coins from bulky corrosion products. The data reveal great divergence of coin surface from the composition of the core with the far better metallurgical process for refining of silver for this hoard.     

EPMA Investigation of Roman Coin Silvering Techniques

Ancient Roman silver coins, especially forgeries, contain various amounts of silver on the surfaces. The state of preservation of the outer layer can vary strongly among different areas of the same coin, thus an investigation of the entire surface is indispensable. The measurement of the silver distribution is a first step towards uncovering the manufacturing techniques. Element mapping by electron probe micro-analysis (EPMA) with increasing step size allows a survey of the complete coin surface. The suitability of this approach is shown and applied to coins having a dark optical appearance and unknown minting technique.     

X-ray fluorescence analysis of some Roman silver coins

Twenty ancient silver coins have been analyzed by the X-ray fluorescence method. For eliminating the effects that disturb the absolute quantitative measurements, we calculated, for each coin, the ratio between the elements that constitute the coin and related them to the silver concentration. From these measurements correlation diagrams have been obtained in which coins are grouped together depending on the silver sources and the purification technologies.     

How effective are reducing plasma afterglows at atmospheric pressure in removing sulphide layers: Application on tarnished silver,sterling silver and copper

A plasma afterglow from a gas mixture of 5 vol% H₂ in He is able to remove tarnish layers on pure silver in a matter of seconds. This dry, localized, and noncontact cleaning technique is a promising method to clean historical objects where silver is combined with organic materials and where traditional cleaning techniques are not recommended. However, historical objects are often manufactured with silver alloys but somehow their tarnish layers are removed less effectively with plasma treatments. To understand the different impact of the afterglow, the surfaces of corroded silver, sterling silver, and copper coupons are characterized before and after plasma treatment by a multianalytical approach combing optical and confocal microscopy, scanning electron microscopy coupled to energy dispersive X‐ray analysis and chronopotentiometry. The analyses demonstrate that the few hundred nanometre‐thick tarnish layer on pure silver is transformed through the whole thickness resulting in a porous metallic film. On top of that metallic film, some isolated remnant Ag₂S particles are found. For sterling silver, a yellowing of the surface occurs. The Ag‐rich corrosion products are reduced to a large extent, while the Cu‐rich corrosion products are only partially reduced. For corroded copper, no apparent visual change is observed at a macroscopic scale, although the morphology of the surface changed. The results allow an evaluation of the cleaning efficiency and provide a deeper understanding of hydrogen plasma effects on the transformation of sulphide corrosion layers at atmospheric pressure.     

Investigation of Contemporary Forgeries of Ancient Silver Coins

Four ancient Roman silver coins from about 200 BC to 200 AD, mainly contemporary forgeries, were investigated in order to deduce the methods and materials used in the production of the forged coins. Special attention was devoted to a Denar from the Roman Republic, a C. Mamilius Limetanus denarius serratus (approx. 82 BC), because an original coin (pure silver) as well as a forgery were available. These coins both show serrated edges, i.e. notches all around with irregular spacing. A combination of microbeam analytical techniques was applied: Scanning Electron Microscopy (SEM), Electron Probe Micro Analysis (EPMA) and Secondary Ion Mass Spectrometry (SIMS). Some of the counterfeits consist of a base metal core plated with silver. The serrated Denar exhibits a plating layer with a thickness of approx. 100µm as determined by SEM and SIMS. This is an indication for foil silvering, as well as the apparent overlapping of the outer layer in one particular area.     

Investigation of contemporary gilded forgeries of ancient coins

Four contemporary forgeries of ancient gold coins were investigated regarding techniques used for gilding, and the composition of the gold cover and the base metal core. The forged coins are a Daric of the Persian Empire, a Gold Stater in the name of Alexander, and two Solidi of the late Roman Empire. A combination of modern analytical methods such as Scanning Electron Microscopy (SEM), Electron Probe Micro Analysis (EPMA), X-Ray Fluorescence Spectrometry (XRF), and SecondaryIon Mass Spectrometry (SIMS) was used. The results demonstrate that the coins represent the main three technologies of gilding used in antiquity. The core of the Daric is a silver Siglos, plated by leaf gilding. The Gold Stater was forged by foil gilding using a silver core. The Roman Solidi have a core of either silver or copper and were plated by fire gilding. On account of our results it is possible to compare the forgers' profits made by use of the different technologies of forging.     

Corrosion behavior and morphological features of archeological bronze coins from ancient China

The archeological round bronze coins, nominated as Wu Zhou and regarded as the first issued effective money in the Han Dynasty of China, have been systematically investigated to disclose their chemical composition, nature of the patina and corrosion features on the coin surface by optical microscopy (OM), X-ray diffraction (X-RD), and scanning electron microscopy (SEM) equipped with backscattered electron (BSE) detector and energy dispersive spectrometry (EDS) techniques. It is revealed morphologically that there are some rough surface cracks, pits, and multicolor patina on the surface of the coins. We prove that the coins are made from bronze material of Cu–Sn–Pb–Sb alloy with contents of 84.8–85.4 wt.% Cu, 3.3–6.1 wt.% Sn, 4.7–6.4 wt.% Pb and 2.6–2.9 wt.% Sb, and covered by two corrosion layers, 25–35 μm for the upper-layer and 20–25 μm for the sub-layer. High chloride content has been detected at the interface between the sub-layer and body of the coins. The lead-rich and tin-rich areas in the coin samples indicate the poor metal compatibility during minting in some locations of the coins. The main compositions of patina are ascertained to be Cu₂(OH)₃Cl, Cu₃(CO₃)₂(OH)₂, Cu₂(OH)₂CO₃, and Pb₃O₄, and the proposed corrosion mechanism is discussed.     

Determination of the silver content of ancient silver coins by neutron activation analysis

A reactor neutron activation analysis procedure for the determination of the silver content of silver coins is described. The samples are irradiated for 1 s, cooled for 85 s and measured for 60 s with a Ge-detector. The analysis is based on the measurement of¹¹⁰Ag and¹⁰⁸Ag. Aluminium is used for flux monitoring and pulse pile-up correction. A calibration curve is prepared by irradiating and measureing a series of discs with known silver contents. An average precision of ±2.1% is obtained. The analysis of coins with known silver contents shows good agreement with the given values. The analysis time is 2.5 minutes per sample.     

Modeling Corrosion of Archaeological Silver‐Copper Coins Using the Voltammetry of Immobilized Particles

Two complementary models to describe the long‐term corrosion of silver‐copper coins, based on potential rate laws for smooth corrosion and those combined with diffusive law, for gross corrosion, are proposed. Theoretical kinetics can be tested using signatures of copper and silver corrosion products using the voltammetry of immobilized particles technique. The method is applied to silver coins minted during the 13^th–14^th centuries from the Libertad street hoard in Valencia (Spain) using non‐invasive one‐touch graphite pencil sampling. Voltammetric features yield functional dependences in agreement with the proposed model potentially useful for distinguishing between different mints.     

Elemental assay of Roma silver and copper coins and associated casting items by XRF

Energy-dispersive X-ray fluorescence (XRF) was employed for the determination of chemical element abundances in silver and copper coins and associated casting items of a hoard discovered in an antique minting facility. The precise and accurate results obtained lead to conclusions about material batches used in the casting, and about concentration variation phenomena occurring at the coin surfaces. The validity of the present method was checked by participating in an intercomparison.     

Study of the Electroless Silver Seed Formation on Silicon Surface

The silver seed on silicon was prepared through aqueous I-IF and AgNO3 solution at room temperature. In order to explore the formation process of silver seed on silicon, the methods of open circuit potential with time （OCP-t）, anodic stripping sweep voltammetry （ASV） and scanning tunneling microscope （STM） were used in this work. The procedure of silver nucleus growing into large particles was explained by electro-negativity. The growth mechanism of silver seed on silicon has been presented： at first, the silver monolayer and multilayer firstly grows onto silicon without fully covering the surface at the expense of silicon etching due to the silver seed attracting the electron from silicon, after that, the monolayer coalesces together, forming continuous grain film with some silver atoms diffusing into the silicon and the multilayer still grows thick simultaneously.     

Gold‐ and Silver‐Catalyzed Reactions of Propargylic Alcohols in the Presence of Protic Additives

A wide range of primary, secondary and tertiary propargylic alcohols undergo a Meyer–Schuster rearrangement to give enones at room temperature in the presence of a gold(I) catalyst and small quantities of MeOH or 4‐methoxyphenylboronic acid. The syntheses of the enone natural products isoegomaketone and daphenone were achieved using this reaction as the key step. The rearrangement of primary propargylic alcohols can readily be combined in a one‐pot procedure with the addition of a nucleophile to the resulting terminal enone, to give β‐aryl, β‐alkoxy, β‐amino or β‐sulfido ketones. Propargylic alcohols bearing an adjacent electron‐rich aryl group can also undergo silver‐catalyzed substitution of the alcohol with oxygen, nitrogen and carbon nucleophiles. This latter reaction was initially observed with a batch of gold catalyst that was probably contaminated with small quantities of silver salt.     

含硫氮螯合树脂对金、银及某些贱金属氰化物吸附性能的研究

用ＩＣＰ－ＡＥＳ研究了含硫氮螯合树脂对碱性氰化溶液中金、银、铜、铁、锌等金属离子的吸附行为。结果表明,该树脂除定量吸附金、银的氰化物外,也吸附铜、锌、铁的氰化物;吸附在树脂上的银及其它贱金属离子可以用２％ＮａＣＮ定量解吸,用硫脲－硫酸溶液可顺利地将金从树脂上洗脱下来,由此可实现金与银等元素的分离。树脂重复使用性能良好。对该树脂吸附金属氰化物的机理进行了初步探讨。     

Exploring Coordination Modes: Late Transition Metal Complexes with a Methylene‐bridged Macrocyclic Tetra‐NHC Ligand

A tetranuclear silver(I) N‐heterocyclic carbene (NHC) complex bearing a macrocyclic, exclusively methylene‐bridged, tetracarbene ligand was synthesized and employed as transmetalation agent for the synthesis of nickel(II), palladium(II), platinum(II), and gold(I) derivatives. The transition metal complexes exhibit different coordination geometries, the coinage metals being bound in a linear fashion forming molecular box‐type complexes, whereas the group 10 metals adapt an almost ideal square planar coordination geometry within the ligand's cavity, resulting in saddle‐shaped complexes. Both the Ag^I and the Au^I complexes show ligand‐induced metal–metal contacts, causing photoluminescence in the blue region for the gold complex. Distinct metal‐dependent differences of the coordination behavior between the group 10 transition metals were elucidated by low‐temperature NMR spectroscopy and DFT calculations.     

Synthesis and plasmonic properties of silver and gold nanoshells on polystyrene cores of different size and of gold–silver core–shell nanostructures

Simple methods of preparing silver and gold nanoshells on the surfaces of monodispersed polystyrene microspheres of different sizes as well as of silver nanoshells on free-standing gold nanoparticles are presented. The plasmon resonance absorption spectra of these materials are presented and compared to predictions of extended Mie scattering theory. Both silver and gold nanoshells were grown on polystyrene microspheres with diameters ranging from 188 to 543 nm. The commercially available, initially carboxylate-terminated polystyrene spheres were reacted with 2-aminoethanethiol hydrochloride (AET) to yield thiol-terminated microspheres to which gold nanoparticles were then attached. Reduction of silver nitrate or gold hydroxide onto these gold-decorated microspheres resulted in increasing coverage of silver or gold on the polystyrene core. The nanoshells were characterized using transmission electron microscopy (TEM), scanning electron microscopy (SEM) and UV–vis spectroscopy. By varying the core size of the polystyrene particles and the amount of metal (silver or gold) reduced onto them, the surface plasmon resonance of the nanoshell could be tuned across the visible and the near-infrared regions of the electromagnetic spectrum. Necklace-like chain aggregate structures of gold core–silver shell nanoparticles were formed by reducing silver nitrate onto free citrate-gold nanoparticles. The plasmon resonance absorption of these nanoparticles could also be systematically tuned across the visible spectrum.     

Surface characterization of medieval silver coins minted by the early Piasts: FT‐IR mapping and SEM/EDX studies

An investigation of a numismatic collection of silver denarii from the early Piast dynasty was conducted using Fourier‐transform infrared spectroscopy. The studied coins, minted between 995 and 1020 ad under the rules of Boleslaus the Brave and Mieszko II Lambert, belong to the collection of the National Museum in Kraków. Fourier‐transform infrared spectroscopy imaging and mapping have been used for recording a visual image of the surface chemistry based on vibrational spectra and accurately representing the distribution of chemical compounds, respectively. Additionally, scanning electron microscopy coupled to energy‐dispersive X‐ray analysis was used to study the surface topography of the coins and characterize their elemental composition. Differences in the distribution of the identified chemical compounds were detected in heterogeneous areas of the denarii. Corrosion effects, associated to many factors including the alloy composition, the metallographic structure, the manufacturing processes, and the environment were also observed and identified.     

XPS and TOF-SIMS applied to the study of ancient artifacts: Further studies on Alexandrian tetradrachms from the time of the Julio-Claudian dynasty

Two tetradrachms from the Diniacopoulos collection housed at Queen's University are the subject of this study. Previously, a protocol had been developed for a coin of the Emperor Claudius from the same collection, which showed that a combination of Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS), Energy Dispersive X-ray Spectroscopy (EDX), and X-ray Photoelectron Spectroscopy (XPS) could provide information and identify areas of interest for additional analysis, thereby minimizing the amount of damage incurred. This is now applied to two more tetradrachms issued by the same mint and dated respectively to the time of Tiberius (14–37 AD) and Nero (54–68 AD). Preliminary results have indicated both differences and similarities between these coins and that from the time of Claudius. By comparing these results, it is hoped that information as to how the coins were made can be elucidated, shedding light on the different components and composition of the alloys produced in the same mint but at different time periods. Moreover, the detection and the identification of corrosion products, along with understanding what restorations methods may have been applied in the past, can guide conservators to determine what conservation treatment and preservation strategies are most appropriate for these antiquities.     

Tandem Gold/Silver‐Catalyzed Cycloaddition/Hydroarylation of 7‐Aryl‐1,6‐enynes to Form 6,6‐Diarylbicyclo[3.2.0]heptanes

Mixtures of [{PCy₂(o‐biphenyl)}AuCl] and AgSbF₆ catalyze the tandem cycloaddition/hydroarylation of 7‐aryl‐1,6‐enynes with electron‐rich arenes to form 6,6‐diarylbicyclo[3.2.0]heptanes in good yield under mild conditions. Experimental observations point to a mechanism involving gold‐catalyzed cycloaddition followed by silver‐catalyzed hydroarylation of a bicyclo[3.2.0]hept‐1(7)‐ene intermediate.     

Characteristics of polypyrrole electrodeposited onto roughened substrates composed of gold–silver bimetallic nanoparticles

In this work, the characteristics of polypyrrole (PPy) films electrodeposited onto an electrochemically roughened gold substrate with bimetallic silver and gold nanoparticles were first investigated. First, a silver substrate was roughened by a triangular‐wave oxidation–reduction cycle (ORC) in an aqueous solution containing 0.1 M HCl. Subsequently, a gold substrate was roughened by a similar ORC treatment in this used solution. The results revealed that the surface of the roughened gold substrate demonstrated two different kinds of deposition domains because of the modification of silver nanoparticles. Encouragingly, some novel characteristics of PPy deposited onto this substrate were observed, in comparison with those on the roughened gold substrate without the modification of silver nanoparticles. They included a denser and more compact surface morphology, higher oxidation degree, increased conductivity, and improved surface‐enhanced Raman scattering. Furthermore, the nucleation and growth mechanism for PPy electropolymerization on this silver‐modified roughened gold substrate was distinguishable from that on the unmodified one. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2724–2731, 2006     

Linear sweep voltammetry: a cheap and powerful technique for the identification of the silver tarnish layer constituents

The potentialities of linear sweep voltammetry (LSV) for the characterization of the tarnish layer formed on pure and sterling silver samples exposed in the chapel and in the museum, at the Cathedral of Porto, in Portugal, are well demonstrated in this study. The technique allows the identification of the constituents of the thin tarnishing layers and also its relative abundance. A much more complex composition than the silver sulphide commonly associated with silver tarnish has been found, namely, silver chlorides, silver oxides and minor amounts of silver sulphide on the pure silver, plus copper oxides and a mixed copper–silver sulphide on the sterling silver samples. The tarnishing films were very thin mainly composed by silver chloride and silver oxides layers with estimated thicknesses ranging between 0.22 and 9.63 nm.