Syntheses and characterization of carbazole based new low‐band gap copolymers containing highly soluble benzimidazole derivatives for solar cell application

Newly designed 2H‐benzimidazole derivatives which have solubility groups at 2‐position have been synthesized and incorporated into two highly soluble carbazole based alternating copolymers, poly[2,7‐(9‐(1′‐octylnonyl)‐9H‐carbazole)‐alt‐5,5‐(4′,7′‐di(thien‐2‐yl)‐2H‐benzimidazole‐2′‐spirocyclohexane)] (PCDTCHBI) and poly[2,7‐(9‐(1′‐octylnonyl)‐9H‐carbazole)‐alt‐5,5‐(4′,7′‐di(thien‐2‐yl)‐2H‐benzimidazole‐2′‐spiro‐4′′‐((2′′′‐ethylhexyl)oxy)‐cyclohexane)] (PCDTEHOCHBI) for photovoltaic application. These alternating copolymers show low‐band gap properties caused by internal charge transfer from an electron‐rich unit to an electron‐deficient moiety. HOMO and LUMO levels are –5.53 and –3.86 eV for PCDTCHBI, and –5.49 and –3.84 eV for PCDTEHOCHBI, respectively. Optical band gaps of PCDTCHBI and PCDTEHOCHBI are 1.67 and 1.65 eV, respectively. The new carbazole based the 2H‐benzimidazole polymers show 0.11–0.13 eV lower values of band gaps as compared to that of carbazole based benzothiadiazole polymer, poly[N‐9′‐heptadecanyl‐2,7‐carbazole‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)] (PCDTBT), while keeping nearly the same deep HOMO levels. The power conversion efficiencies of PCDTCHBI and PCDTEHOCHBI blended with [6,6]phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) are 1.03 and 1.15%, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and properties of the conjugated polymers with indenoindene and benzimidazole units for organic photovoltaics

A new electron deficient unit, dimethyl‐2H‐benzimidazole (MBI), and dihydroindeno[2,1‐a]indene (ININE) moiety as electron‐rich unit were coupled to synthesize the conjugated polymers containing electron donor–acceptor pair for organic photovoltaics. ININE, MBI, and thiophene (or bithiophene) units were incorporated using Stille and Suzuki polymerization to generate poly(2,7‐(5,5,10,10‐tetrakis(2‐ethylhexyl)‐5,10‐dihydro‐ indeno[2,1‐a]indene)‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2,2‐dimethyl‐2H‐benzimidazole)) (PININEDTMBIs) (or PININEBBTMBIs). In MBI, the sulfur at 2‐position of 2,1,3‐benzothiadiazole (BT) unit was replaced with dialkyl‐substituted carbon, whereas keeping the 1,2‐quinoid form, to improve the solubility of the polymers. The field‐effect hole mobility of PININEBBTMBI was 3.2 × 10^?4 cm²/Vs which was improved as compared to that of PININEDTMBI (2.7 × 10^?5 cm²/Vs) caused by the introduction of bithiophene units. In case of the most efficient polymer, PININEBBTMBI, the device with the configuration of indium tin oxide (ITO)/poly(3,4‐ethylenedioxythiophene) (PEDOT):polystyrene sulfonate (PSS)/polymer:PC₇₁BM(1:4 w/w)/Al, annealed at 100 °C for 10 min demonstrated a open circuit voltage of 0.78 V, a short‐circuit current density of 6.66 mA/cm², and a fill factor of 0.41, leading to the power conversion efficiency of 2.11%, under white‐light illumination (AM 1.5 G, 100 mW/cm²). © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Parameters influencing the molecular weight of 3,6‐carbazole‐based D‐π‐A‐type copolymers

Condensation copolymerization reactions of carbazole 3,6‐diboronate with 4,7‐bis(5‐bromo‐2‐thienyl)‐2,1,3‐benzothiadiazole (DTBT) only produce low‐molecular‐weight donor (D)‐π‐acceptor (A) copolymers. High‐molecular‐weight copolymers for use in optoelectronic devices are necessary for achieving extended π‐conjugation and for controlling the copolymer processibility. To elucidate the cause of the persistently low molecular weight, we synthesized three 3,6‐carbazole‐based D‐A copolymers using copolymerizations of N‐9′‐heptadecanyl‐3,6‐carbazole with DTBT, N‐9′{2‐[2‐(2‐methoxy‐ethoxy)‐ethoxy]‐ethyl}‐3,‐6‐carbazole with DTBT, and N‐9′‐heptadecanyl‐3,6‐carbazole with alkyl‐substituted DTBT. We investigated several parameters for their influence on molecular copolymer weight, including the conformation of the chain during growth, the solubility of the monomers, and the dihedral angles between the donor and acceptor units. Size exclusion chromatography, UV–vis absorption spectroscopy, and computational studies revealed that the low molecular weights of 3,6‐carbazole‐based D‐A copolymers resulted from conjugation breaks and the resulting high coplanarity, which led to strong interactions between polymer chains. These interactions limited formation of high‐molecular‐weight‐copolymers during copolymerization. The strong intermolecular interactions of the 3,6‐carbazole moiety were exploited by incorporating 3,6‐carbazole units into poly[9′,9′‐dioctyl‐2,7‐flourene‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)] prepared from 9′,9′‐dioctyl‐2,7‐flourene and DTBT. Interestingly, the number average molecular weight increased gradually with increasing 2,7‐fluorene monomer content but the number of conjugation breaks was a range of 6–7. The hole mobilities of the copolymers were studied for comparison purposes. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Incorporation of Hexa‐peri‐hexabenzocoronene (HBC) into Carbazole–Benzo‐2,1,3‐thiadiazole Copolymers to Improve Hole Mobility and Photovoltaic Performance

Hexa‐peri‐hexabenzocoronene (HBC) is a discotic‐shaped conjugated molecule with strong π–π stacking property, high intrinsic charge mobility, and good self‐assembly properties. For a long time, however, organic photovoltaic (OPV) solar cells based on HBC demonstrated low power conversion efficiencies (PCEs). In this study, two conjugated terpolymers, poly[N‐9′‐heptadecanyl‐2,7‐carbazole‐alt‐5,5′‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)] (PCDTBT)‐ 5 HBC and PCDTBT‐ 10 HBC, were synthesized by incorporating different amounts of HBC as the third component into poly[N‐9′‐heptadecanyl‐2,7‐carbazole‐alt‐5,5′‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)] (PCDTBT) through Suzuki coupling polymerization. For comparison, the donor–acceptor (D –A) conjugated dipolymer PCDTBT was also synthesized to investigate the effect of HBC units on conjugated polymers. The HBC‐containing polymers exhibited higher thermal stabilities, broader absorption spectra, and lower highest‐occupied molecular orbital (HOMO) energy levels. In particular, the field‐effect mobilities were enhanced by more than one order of magnitude after the incorporation of HBC into the conjugated polymer backbone on account of increased interchain π–π stacking interactions. The bulk heterojunction (BHJ) polymer solar cells (PSCs) fabricated with the polymers as donor and PC₇₁BM as acceptor demonstrated gradual improvement of open‐circuit voltage (V_OC) and short‐circuit current (J_SC) with the increase in HBC content. As a result, the PCEs were improved from 3.21 % for PCDTBT to 3.78 % for PCDTBT‐ 5 HBC and then to 4.20 % for PCDTBT‐ 10 HBC.     

Synthesis and properties of photoluminescent polymers bearing electron‐facilitating oxadiazole derivative side groups

Poly(p‐divinylene phenylene) derivatives bearing fluorene and carbazole units in the main chain and 5‐phenyl‐1,3,4‐oxadiazole moieties as side groups were prepared by the polycondensation of a newly synthesized monomer, [2‐(5′‐phenyl‐1′,3′,4′‐oxadiazole‐2′‐yl)‐1,4‐xylylene]bis(triphenyl phosphonium bromide) (OXAD), with 9,9‐dibutylfluorene‐2,2′‐dicarbaldehyde (DBFDA) and 9‐(2‐ethylhexyl)carbazole‐3,6‐dicarbaldehyde (EHCDA), which gave DBFDA–OXAD and EHCDA–OXAD. Analogues of these polymers without the side groups were also synthesized by the reaction of 1,4‐xylene bis(triphenyl phosphonium bromide) (PXYL) with the dicarbaldehydes, which gave DBFDA–PXYL and EHCDA–PXYL. All the synthesized polymers are soluble in organic solvents, giving films of good quality. The polymers are stable beyond 375 °C. They emit blue and blue‐green light, and their quantum yields are 38–79% in solution and 1–24% in film, depending on the fluorene and carbazole units as well as the side groups. In particular, the OXAD‐based polymers contain hole‐facilitating backbones and electron‐facilitating side groups, perhaps allowing these polymers to transport both holes and electrons. Overall, the synthesized polymers are potential candidates for the fabrication of light‐emitting devices. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1173–1183, 2002     

Relationship between the liquid crystallinity and field‐effect‐transistor behavior of fluorene–thiophene‐based conjugated copolymers

A series of fluorene–thiophene‐based semiconducting materials, poly(9,9′‐dioctylfluorene‐alt‐α,α′‐bisthieno[3,2‐b]thiophene) (F8TT2), poly(9,9′‐di(3,6‐dioxaheptyl)fluorene‐alt‐thieno[3,2‐b]thiophene) (BDOHF8TT), poly(9,9′‐di(3,6‐dioxaheptyl)fluorene‐alt‐bithiophene) (BDOHF8T2), and poly(9,9′‐dioctylfluorene‐co‐bithiophene‐co‐[4‐(2‐ethylhexyloxyl)phenyl]diphenylamine) (F8T2TPA), was synthesized through a palladium‐catalyzed Suzuki coupling reaction. F8TT2, BDOHF8TT, BDOHF8T2, and F8T2TPA films exhibited photoluminescence maxima at 523, 550, 522, and 559 nm, respectively. Solution‐processed field‐effect transistors (FETs) fabricated with all the copolymers except F8T2TPA showed p‐type organic FET characteristics. Studies of the differential scanning calorimetry scans and FETs of the polymers revealed that more crystalline polymers gave better FET device performance. The greater planarity and rigidity of thieno[3,2‐b]thiophene in comparison with bithiophene resulted in higher crystallinity of the polymer backbone, which led to improved FET performance. On the other hand, the random incorporation of the triphenylamine moiety into F8T2TPA caused the polymer chains to lose crystallinity, resulting in an absence of FET characteristics. With this study, we could assess the liquid‐crystallinity dependence of the field‐effect carrier mobility on organic FETs based on liquid‐crystalline copolymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4709–4721, 2006     

Conjugated polymers based on dicarboxylic imide‐substituted isothianaphthene and their applications in solar cells

Four new polymers containing a benzo[c]thiophene‐N‐dodecyl‐4,5‐dicarboxylic imide (DIITN) unit including the homopolymer and three donor–acceptor copolymers were designed, synthesized, and characterized. For these copolymers, DIITN unit with low bandgap was selected as an electron acceptor, whereas 5,5′‐(2,7‐bisthiophen‐2‐yl)‐9‐(2‐decyltetradecyl)‐9H‐carbazole), 5,5′‐(3,3′‐di‐n‐octylsilylene‐2,2′‐bithiophene), and 5,5′‐(2,7‐bisthiophen‐2‐yl‐9,9‐bisoctyl‐9H‐fluoren‐7‐yl) were chosen as the electron donor units to tune the highest occupied molecular orbital/lowest unoccupied molecular orbital (HOMO/LUMO) levels of the copolymers for better light harvesting. These polymers exhibit extended absorption in the visible and near‐infrared range and are soluble in common organic solvents. The relative low lying HOMO of these polymers promises good air stability and high open‐circuit voltage (V_oc) for photovoltaic application. Bulk heterojunction solar cells were fabricated by blending the copolymers with [6,6]‐phenyl‐C61‐butyric acid methyl ester or [6,6]‐phenyl‐C71‐butyric acid methyl ester (PC71BM). The best power conversion efficiency of 1.6% was achieved under simulated sunlight AM 1.5G (100 mW/cm²) from solar cells containing 20 wt % of the fluorene copolymer poly[5,5′‐(2,7‐bisthiophen‐2‐yl‐9,9‐bisoctyl‐9H‐fluoren‐7‐yl)‐alt‐2,9‐(benzo[c]thiophene‐N‐dodecyl‐4,5‐dicarboxylic imide)] and 80 wt % of PC71BM with a high open‐circuit voltage (V_oc) of 0.84 V. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of low‐bandgap copolymers based on dihexyl‐2h‐benzimidazole and cyclopentadithiophene

A series of new semiconducting polymers based on 4,4‐dihexyl‐4H‐cyclopenta[2,1‐b:3,4‐b′]dithiophene, 2,2‐dihexyl‐2H‐benzimidazole, and thiophene units was synthesized. The polymers show good solubility at room temperature in organic solvents owing to long alkyl chain in new acceptor, 2,2‐dihexyl‐2H‐benzimidazole. The advantage of dihexyl‐2H‐benzimidazole compared to the benzothiadiazole is to improve the solubility of the polymer. It was found that these polymers can finely be tuned for photovoltaic application by adjusting the contents ratio of the dihexyl‐2H‐benzimidazole unit. The spectra of the solid films show absorption bands with maximum peaks in the range of 421–577 nm and the absorption onsets at 588–683 nm, corresponding to band gaps of 2.11–1.82 eV. The devices with PCPDTDTHBI‐1 :PC₇₁BM showed an open‐circuit voltage (V_OC) of 0.46 V, a short‐circuit current density (J_SC) of 3.83 mA/cm², and a fill factor of 0.36, giving a power conversion efficiency of 0.64%. Decrease of the dihexyl‐2H‐benzimidazole contents in the polymers induced red‐shift of the UV absorptions, and increased V_OC and J_SC values, to improve the efficiency of organic photovoltaics. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Structure of an unexpected trimer from the reaction of ageratochromene II with aluminum chloride

A new trimer from the reaction of ageratochromene [1] (6,7‐dimethoxy‐2,2‐dimethyl‐1‐benzopyran) with anhydrous aluminum chloride was shown to be 3,4‐dihydro‐6,7‐dimethoxy‐2,2‐dimethyl‐3‐(6′,7′‐dimethoxy‐2′,2′‐dimethyl‐2H‐1‐benzopyran‐4′‐yl)‐4‐(3′,4′‐dihydro‐6′, 7′‐dimethoxy‐2′,2′‐dimethyl‐2H‐1‐benzopyran‐3′‐yl)‐ 2H‐1‐benzopyran. Its structure was confirmed by NMR (¹H, ¹³C, DEPT‐135. COSY, HMBC, HSQC, TOCSY and NOESY), IR, mass spectra and elemental analysis. Copyright © 2002 John Wiley & Sons, Ltd.     

Studies with Heterocyclic β‐Enaminoniriles: A Simple Route for the Synthesis of Polyfunctionally Substituted Thiophene,Imidazo[1,2:1′,6′]pyrimido[5,4‐b]thiophene and Thieno[3,2‐d]pyrimidine Derivatives

Reaction of 3,5‐diaminothiophene‐2‐carbonitrile derivatives 3a‐c with ethoxycarbonylmethyl isothiocyanate and/or N‐[bis(methylthio)methylene]glycine ethyl ester led to formation of 7‐substituted‐8‐amino‐5‐thioxo‐6H‐imidazo[1,2:1′,6′]pyrimido[5,4‐b]thiophene‐2(3H)‐one derivatives 6a‐c and 7‐substituted‐8‐amino‐5‐(methylthio)imidazo[1,2:1′,6′]pyrimido[5,4‐b]thiophene‐2(3H)‐one 7a‐c , respectively. Also, the synthetic potential of the β‐enaminonitrile moiety in 3a‐c has been explored; it proved to be a promising candiate for the synthesis of 1,6‐disubstituted‐2,4‐diamino‐7,8‐dihydro‐8‐oxopyrrolo[1,2‐a]thieno[2,3‐e]pyrimidine derivatives 10a‐f and pyrido[2′,3′:6,5]pyrimido[3,4‐a]benzimidazole derivatives 12a,b .     

Copolymers comprising 2,7-carbazole and bis-benzothiadiazole units for bulk-heterojunction solar cells

On the basis of theoretical considerations of the intramolecular charge transfer (ICT) effect, we have designed a series of donor (D)–acceptor (A) conjugated polymers based on bis‐benzothiadiazole (BBT). A PPP‐type copolymer of electron‐rich 2,7‐carbazole (CZ) and electron‐deficient BBT units poly[N‐(2‐decyltetradecyl)‐2,7‐carbazole‐co‐7,7′‐{4,4′‐bis‐(2,1,3‐benzothiadiazole)}] ( PCZ‐BBT ), a PPV‐type copolymer poly[N‐(2‐decyltetradecyl)‐2,7‐carbazolevinylene‐co‐7,7′‐{4,4′‐bis‐(2,1,3‐benzothiadiazolevinylene)}] ( PCZV‐BBTV ), and a tercopolymer based on carbazole, thiophene, and BBT poly[N‐(2‐decyltetradecyl)‐2,7‐(di‐2‐thienyl)carbazole‐co‐7,7′‐{4,4′‐bis‐(2,1,3‐benzothiadiazole)}] ( PDTCZ‐BBT ) have been synthesized to understand the influence of BBT acceptor structure and linkage on the photovoltaic characteristics of the resulting materials. Both the HOMO and LUMO of the resulting polymers are found to be deeper‐lying than those of benzothiadiazole‐based polymers. The measured electrochemical band gaps (eV) are in the following order: PDTCZ‐BBT (1.65 eV) < PCZV‐BBTV (1.69 eV) < PCZ‐BBT (1.75 eV). All the polymers provide a photovoltaic response when blended with a fullerene derivative as an electron acceptor. The best cell reaches a power conversion efficiency of 2.07 % estimated under standard solar light conditions (AM1.5G, 100 mW cm^?2). We demonstrate for the first time that BBT‐based polymers are promising materials for use in bulk‐heterojunction solar cells.     

High performance semiconducting polymers containing bis(bithiophenyl dithienothiophene)‐based repeating groups for organic thin film transistors

New dithienothiophene‐containing conjugated polymers, such as poly(2,6‐bis(2‐thiophenyl‐3‐dodecylthiophene‐2‐yl)dithieno[3,2‐b;2′,3′‐d]thiophene, 4 and poly(2,6‐bis (2‐thiophenyl‐4‐dodecylthiophene‐2‐yl)dithieno[3,2‐b;2′,3′‐d]thiophene, 8 have been successfully synthesized via Stille coupling reactions using dodecyl‐substituted thiophene‐based monomers, bistributyltin dithienothiophene, and bistributyltin bithiophene; these polymers have been fully characterized. The main difference between the two polymers is the substitution position of the dodecyl side chains in the repeating group. Grazing‐incidence X‐ray diffraction (GI‐XRD) gave clear evidence of edge‐on orientation of polycrystallites to the substrate. The semiconducting properties of the two polymers have been evaluated in organic thin film transistors (OTFTs). The two conjugated polymers 4 and 8 exhibit fairly high hole carrier mobilities as high as μ_ave = 0.05 cm²/Vs (I_ON/OFF = 3.42 × 10⁴) and μ_ave = 0.01 cm²/Vs, (I_ON/OFF = 1.3 × 10⁵), respectively, after thermal annealing process. The solvent annealed films underwent reorganization of the molecules to induce higher crystallinity. Well‐defined atomic force microscopy (AFM) topography supported a significant improvement in TFT device performance. The hole carrier mobilities of the solvent annealed films are comparable to those obtained for a thermally annealed sample, and were one‐order higher than those obtained with a pristine sample. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis,photophysics, theoretical modeling,and electroluminescence of novel 2,7‐carbazole‐based conjugated polymers with sterically hindered structures

2,7‐dibromo‐N‐hexylcarbazole is successfully synthesized in three steps with an overall 37% yield. Novel 2,7‐carbazole‐based sterically hindered conjugated polymers are further synthesized. In the backbone structure of polymer P1 , alkylated bithiophene moiety is β‐substituted with dodecyl chains on both thiophene rings, adopting the tail‐to‐tail configuration. While for polymers P2 and P3 , partially planarized thieno[3,2‐b]thiophene moiety ( P2 ) and β‐pentyl substituted thieno[3,2‐b]thiophene ( P3 ) are incorporated. All polymers demonstrate efficient blue‐to‐green light emission, good thermal stability (T_d ≥ 379 °C), and high glass transition temperatures (T_g = 118 °C). The optical and electronic properties of the resulted polymers are tuned by the incorporated alkyl chains. For instance, the incorporation of β‐pentyl group in thieno[3,2‐b]thiophene moiety endows P3 with blue‐shifted photophysical spectra, reduced fluorescence quantum yield and larger band gap in comparison with P2 . The steric effect of incorporated alkyl chains is further illustrated by geometry optimization of three model oligomers (analogues to the repetition units of P1–P3 ) using density functional theory. Sterically hindered polymers P1 and P2 exhibit high charge transport ability and moderate electroluminescent properties in primarily tested single‐layer light‐emitting diodes (configuration: ITO/PEDOT:PSS/Polymer/Ca/Ag). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7725–7738, 2008     

Synthesis,Structure, and Magnetic Properties of a Copper(II) Metal‐Organic Framework with Biphenyl‐2,2′,4,4′‐tetracarboxylic Acid

The 2D Cu^II metal‐organic framework [Cu₂(bptc)(H₂O)₄]_n · 4nH₂O ( 1 ) (H₄bptc = biphenyl‐2,2′,4,4′‐tetracarboxylic acid) was hydrothermally synthesized and characterized by single‐crystal X‐ray diffraction and magnetic measurements. In the structure, bptc^4– serves as a twisted Π‐shaped organic building block to connect paddlewheel [Cu₂(COO)₄] dinuclear units and mononuclear units through 2‐/2′‐carboxylate and 4‐/4′‐carboxylate, respectively. According to the magnetic analysis using a dimer‐plus‐monomer model, strong antiferromagnetic coupling is operative within the dinuclear unit (J = –311 cm^–1 based on H = –J S ₁ S ₂), and the compound behaves like a mononuclear molecule at low temperature.     

Significantly improved photovoltaic performances of the dithiophene‐benzothiadiazole‐alt‐fluorene copolymers by incorporating carbazole units in fluorene moiety

To exploit an effective way to improve polymeric photovoltaic performance, a series of dithiophene‐benzothiadiazole‐alt‐fluorene copolymers containing carbazole groups at C‐9 positions of the alternating fluorene units (PFO‐FCz‐DBT) were synthesized and characterized. The effect of the carbazole groups on the optophysical, electrochemical, and photovoltaic properties of these copolymers was investigated. By comparison, this type of copolymers with carbazole units exhibited significantly improved photovoltaic properties than poly(2,7‐(9,9‐dioctyl‐fluorene)‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole) (PFO‐DBT) in the bulk heterojunction solar cells. A maximum power‐conversion efficiency (PCE) of 2.41% and a highest short‐circuit current density (J_sc) of 9.68 mA cm^?2 were obtained for the PFO‐FCz‐DBT30, which are about two times higher than the corresponding levels for the PFO‐DBT30. This work demonstrated that introducing a hole‐transporting carbazole unit into copolymer is a simple and effective method to improve the J_sc and PCE. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Novel Conjugated Polymers Based on Dithieno[3,2‐b:6,7‐b]carbazole for Solution Processed Thin‐Film Transistors

Two conjugated polymers (CPs) P‐tCzC12 and P‐tCzC16 comprising alternating dithieno[3,2‐b:6,7‐b]carbazole and 4,4′‐dihexadecyl‐2,2′‐bithiophene units have been designed and synthesized. Upon thermal annealing, they can form ordered thin films in which the polymer backbones dominantly adopted an edge‐on orientation respective to the substrate with a lamellar spacing of ≈24 Å and a π‐stacking distance of ≈3.7 Å. Organic thin‐film transistors (OTFTs) were fabricated by solution casting. A hole mobility of 0.39 cm² V⁻¹s⁻¹ has been demonstrated with P‐tCzC16. This value is the highest among the CPs containing heteroacenes larger than 4 rings.     

Low Bandgap Semiconducting Copolymer Nanoparticles by Suzuki Cross‐Coupling Polymerization in Alcoholic Dispersed Media

The synthesis and formulation of organic semiconductors for the emerging technology of organic electronics requires the use of preparative methods and solvents being environment friendly. Today most of the active layer materials for the organic photovoltaic devices and modules are using chlorinated solvents, which are toxic and hazardous. In this work, the synthesis of poly[N‐9′‐heptadecanyl‐2,7‐carbazole‐alt‐5,5‐(4,7‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole] (PCDTBT) in propan‐1‐ol is presented as the dispersant continuous phase in the presence of poly(vinylpyrrolidone) used as stabilizer. Suzuki–Miyaura polycondensation of 9‐(9‐heptadecanyl)‐9H‐carbazole‐2,7‐diboronic acid bis(pinacol) ester and 4,7‐bis(2‐bromo‐5‐thienyl)‐2,1,3‐benzothiadiazole in alcohol dispersion yields colloidally stable nanoparticles of PCDTBT with particles size of 330–1300 nm, depending on the stabilizer concentration. Other reaction parameters are also discussed such as the amount of base or Pd catalyst.

     

Novel phenanthrocarbazole based donor–acceptor random and alternating copolymers for photovoltaics

A series of 6H‐phenanthro[1,10,9,8‐cdefg]carbazole (PC) and benzothiadiazole (BT) based donor–acceptor (D‐A) random copolymers PPC‐T‐BT_3/1, PPC‐T‐BT_2/1, PPC‐T‐BT_1/1, PPC‐T‐BT_1/2, and PPC‐T‐BT_1/3 were easily prepared by varying the molar ratio of PC to BT from 3:1, 2:1, 1:1, 1:2, to 1:3, respectively. The corresponding alternating D‐A copolymer poly{6H‐phenanthro[1,10,9,8‐cdefg]carbazole‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole} (PPCDTBT) was also synthesized for comparison. Compared with PPCDTBT, PPC‐T‐BT_1/1, PPC‐T‐BT_1/2, and PPC‐T‐BT_1/3 obtained more pronounced intramolecular charge transfer band and extended absorption. Power conversion efficiency of these copolymer‐based devices strongly depends on the D/A molar ratio, related to the spectrum absorption and active layer morphology. Among the polymer solar cells based on random copolymers, PPC‐T‐BT_2/1:PC₆₁BM based device achieved the best efficiency of 1.9%, which is close to the efficiency of PPCDTBT:PC₆₁BM based device (2.3%). Therefore, it is concluded that the random copolymer can achieve the comparable performance to alternating copolymer by precisely adjusting the D/A molar ratio on small scales. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4885–4893     

Syntheses and electroluminescence properties of conjugated poly(p‐phenylene vinylene) derivatives bearing dendritic pendants

A series of new poly(p‐phenylene vinylene) derivatives with different dendritic pendants—poly{2‐[3′,5′‐bis(2″‐ethylhexyloxy)benzyloxy]‐1,4‐phenylenevinylene} (BE–PPV), poly{2‐[3′,5′‐bis(3″,7″‐dimethyl)octyloxy]‐1,4‐phenylenevinylene} (BD–PPV), poly(2‐{3′,5′‐bis[3″,5″‐bis(2?‐ethylhexyloxy)benzyloxy]benzyloxy}‐1,4‐phenylenevinylene) (BBE–PPV), poly(2‐{3′,5′‐bis[3″,5″‐bis(3?,7?‐dimethyloctyloxy)benzyloxy]benzyloxy}‐1,4‐phenylenevinylene) (BBD–PPV), and poly[(2‐{3′,5′‐bis[3″,5″‐bis(2?‐ethylhexyloxy)benzyloxy]benzyloxy}‐1,4‐phenylenevinylene)‐co‐(2‐{3′,5′‐bis[3″,5″‐bis(3?,7?‐dimethyloctyloxy)benzyloxy]benzyloxy}‐1,4‐phenylenevinylene)] (BBE‐co‐BBD–PPV; 1:1)—were successfully synthesized according to the Gilch route. The structures and properties of the monomers and the resulting conjugated polymers were characterized with ¹H and ¹³C NMR, elemental analysis, gel permeation chromatography, thermogravimetric analysis, ultraviolet–visible absorption spectroscopy, photoluminescence, and electroluminescence spectroscopy. The obtained polymers possessed excellent solubility in common solvents and good thermal stability, with a 5% weight loss temperature of more than 328 °C. The weight‐average molecular weights and polydispersity indices of BE–PPV, BD–PPV, BBE–PPV, BBD–PPV, and BBE‐co‐BBD–PPV (1:1) were in the range of 1.33–2.28 × 10⁵ and 1.35–1.53, respectively. Double‐layer light‐emitting diodes (LEDs) with the configuration of indium tin oxide/polymer/tris(8‐hydroxyquinoline) aluminum/Mg:Ag/Ag devices were fabricated, and they emitted green‐yellow light. The turn‐on voltages of BE–PPV, BD–PPV, BBE–PPV, BBD–PPV, and BBE‐co‐BBD–PPV (1:1) were approximately 5.6, 5.9, 5.5, 5.2, and 4.8 V, respectively. The LED devices of BE–PPV and BD–PPV possessed the highest electroluminescent performance; they exhibited maximum luminance with about 860 cd/m² at 12.8 V and 651 cd/m² at 13 V, respectively. The maximum luminescence efficiency of BE–PPV and BD–PPV was in the range of 0.37–0.40 cd/A. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3126–3140, 2005     

Soluble polynorbornenes with pendant carbazole derivatives as host materials for highly efficient blue phosphorescent organic light‐emitting diodes

We report novel host polymers for a high‐efficiency polymer‐based solution‐processed phosphorescent organic light‐emitting diode with typical blue‐emitting dopant bis(4,6‐difluorophenylpyridinato‐N,C²)iridium(III) picolinate (FIrpic). The host polymers, soluble polynorbornenes with pendant carbazole derivatives, N‐phenyl‐9H‐carbazole ( P1 ), N‐biphenyl‐9H‐carbazole ( P2 ), and 9,9′‐(1,3‐phenylene)bis‐9H‐carbazole (mCP) ( P3 ) are efficiently synthesized by vinyl addition polymerization of norbornene monomers using Pd(II) catalyst in combination with 1‐octene chain transfer agent. The polymers exhibit high thermal stability with high decomposition (T_d5 > 410 °C) and glass transition temperatures (T_g ≈ 268 °C). The HOMO (ca. ?5.5 to ?5.7 eV) and LUMO (ca. ?2.0 to ?2.1 eV) levels with the high triplet energy of about 2.7–3.0 eV suggest that the polymers are suitable for a host material for blue emitters. Among the solution‐processed devices that were fabricated based on the emissive layers containing the P1 ? P3 host doped with various concentrations of FIrpic (7–13 wt %), the best device with P3 host exhibits power efficiency of 3.0 lm W^?1 and external quantum efficiency of 4.0% at a luminance of 1000 cd m^?2 that is outstanding among the polymeric rivals. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012