Enthalpies of formation and isomerization of cis‐ and trans‐decalin,and their oxa‐analogs by G3(MP2)//B3LYP calculations

G3(MP2)//B3LYP calculations have been carried out on trans‐ and cis‐decalin, and their mono‐, di‐, tri‐, and tetraoxa‐analogs. The main purpose of the work was to obtain enthalpies of formation for these compounds, and to study the relative stabilities of the cis–trans and positional isomers of the various (poly)oxadecalins. Comparison of the computational enthalpies of formation with the respective experimental ones, known only for the decalins and 1,3,5,7‐tetraoxadecalins, shows that in both cases the computational values are more negative than the experimental ones, the deviations being ?5 to ?7 kJ mol^?1 for the decalins and ?12 to ?17 kJ mol^?1 for the 1,3,5,7‐tetraoxadecalins. The respective computational enthalpies of cis–trans isomerization, however, are in excellent to satisfactory agreement with the experimental data. The cis–trans enthalpy differences vary from +11.0 kJ mol^?1 for decalin to ?15.4 kJ mol^?1 for 1,4,5,8‐tetraoxadecalin. Low relative enthalpy values were also calculated for the cis isomers of 1,8‐dioxadecalin (?3.7 kJ mol^?1), 1,3,6‐trioxadecalin (?4.6 kJ mol^?1), 1,3,8‐trioxadecalin (?9.7 kJ mol^?1), 1,4,5‐ trioxadecalin (?5.6 kJ mol^?1), 1,3,5,8‐tetraoxadecalin (?7.3 kJ mol^?1), and 1,3,6,8‐tetraoxadecalin (?14.5 kJ mol^?1). Copyright © 2009 John Wiley & Sons, Ltd.     

Standard molar enthalpies of formation of dimethylbenzophenones

The standard (p⁰ = 0.1 MPa) molar enthalpy of formation of 3,4‐dimethylbenzophenone was derived from the standard molar energy of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry. The Calvet high temperature vacuum sublimation technique was used to measure the enthalpy of sublimation of the compound. From these experimental parameters, the standard molar enthalpy of formation of 3,4‐dimethylbenzophenone, in the gaseous phase and at T = 298.15 K, was derived as ?(17.1 ± 2.9) kJ mol^?1. Density functional theory was used to investigate the gas‐phase molecular energetics of the 12 dimethylbenzophenones. Molecular geometries and vibrational frequencies were computed at the B3LYP/6‐31G(d) level of theory. The larger 6‐311+G(2d,2p) basis set was used to compute the energy of all dimethylbenzophenones and of the other compounds that were considered for the estimation of the standard molar enthalpies of formation at T = 298.15 K. The calculations show that the 2,2′‐ and 4,4′‐dimethylbenzophenones are the least and most stable isomers, respectively. Finally, the calculated enthalpy of formation of the benzophenone that was also studied experimentally, 3,4‐dimethylbenzophenone, is ?16.7 kJ mol^?1, which is in excellent agreement with the experimental result. Copyright © 2008 John Wiley & Sons, Ltd.     

The energetics of naphthalene derivatives. II. The isomeric 1— and 2—naphthyl acetates

The isomeric 1- and 2-naphthyl acetates (acetoxynaphthalenes) are at the confluence of diverse concepts, techniques and classes of organic compounds. Summing the results of literature measurements of the enthalpy of formation of their solids and of our new sublimation enthalpies reported herein, we derive gas phase enthalpies of formation of ?209.9 ± 1.4 and ?213.3 ± 1.3 kJ mol^?1 respectively. This corresponds to 2-naphthyl acetate being more stable than its 1-isomer by 3.4 ± 1.9 kJ mol^?1. We also performed MP2(full)/6-31G(d) calculations on these species, resulting in enthalpies of formation of ?212.9 ± 3.9 and ?212.2 ± 3.9 kJ mol^?1 for 1- and 2-naphthyl acetate and a difference of ?0.7 kJ mol^?1 respectively in satisfactory agreement with the above experimental results.     

Proximity effects of oxygen atoms on the enthalpies of formation of simple diethers: a computational G3(MP2)//B3 study

The enthalpies of formation of a number of acyclic, straight‐chain ethers and diethers were determined by G3(MP2)//B3 calculations. The principal aim of the work was to study the magnitude of the O…O proximity effect on the enthalpy contents of diethers as a function of the distance (number of bonds) between the O atoms. 1,4‐Diethers and 1,5‐diethers were computed to be destabilized by ca. 4.5 (±0.5) and 3.2 (±0.4) kJ mol^?1, respectively, by the O…O proximity effect. The effect was calculated to be negligible in diethers with the O atoms in positions more remote than 1,5 from each other, whereas 1,3‐diethers (acetals) are stabilized by ca. 22 kJ mol^?1, likely on account of the anomeric effect. Calculations on simple monoethers show that the contributions to of CH₂ groups in the β and γ positions (relative to O) are reduced by ca. 0.8 and 0.3 kJ mol^?1, respectively, relative to those of CH₂ groups more remote from the O atom. The computational enthalpies of formation of the studied monoethers and diethers, both cyclic and acyclic, are generally in good agreement with experimental data, another important result of the present work. Copyright © 2008 John Wiley & Sons, Ltd.     

Theoretical studies on structure and performance of [1,2,5]‐oxadiazolo‐[3,4‐d]‐pyridazine‐based derivatives

Based on energetic compound [1,2,5]‐oxadiazolo‐[3,4‐d]‐pyridazine, a series of functionalized derivatives were designed and first reported. Afterwards, the relationship between their structure and performance was systematically explored by density functional theory at B3LYP/6‐311 g (d, p) level. Results show that the bond dissociation energies of the weakest bond (N–O bond) vary from 157.530 to 189.411 kJ · mol^?1. The bond dissociation energies of these compounds are superior to that of HMX (N–NO_2, 154.905 kJ · mol^?1). In addition, H1, H2, H4, I2, I3, C1, C2, and D1 possess high density (1.818–1.997 g · cm^?3) and good detonation performance (detonation velocities, 8.29–9.46 km · s^?1; detonation pressures, 30.87–42.12 GPa), which may be potential explosives compared with RDX (8.81 km · s^?1, 34.47 GPa ) and HMX (9.19 km · s^?1, 38.45 GPa). Finally, allowing for the explosive performance and molecular stability, three compounds may be suggested as good potential candidates for high‐energy density materials. Copyright © 2016 John Wiley & Sons, Ltd.     

Homo‐Diels–Alder reaction of a very inactive diene,bicyclo[2,2,1]hepta‐2,5‐diene,with the most active dienophile, 4‐phenyl‐1,2,4‐triazolin‐3,5‐dione. Solvent,temperature, and high pressure influence on the reaction rate

Solvent, temperature, and high pressure influence on the rate constant of homo‐Diels–Alder cycloaddition reactions of the very active hetero‐dienophile, 4‐phenyl‐1,2,4‐triazolin‐3,5‐dione (1), with the very inactive unconjugated diene, bicyclo[2,2,1]hepta‐2,5‐diene (2), and of 1 with some substituted anthracenes have been studied. The rate constants change amounts to about seven orders of magnitude: from 3.95^.10^?3 for reaction (1+2) to 12200 L mol^?1 s^?1 for reaction of 1 with 9,10‐dimethylanthracene (4e) in toluene solution at 298 K. A comparison of the reactivity (ln k₂) and the heat of reactions (?_r‐nH) of maleic anhydride, tetracyanoethylene and of 1 with several dienes has been performed. The heat of reaction (1+2) is ?218 ± 2 kJ mol^?1, of 1 with 9,10‐dimethylanthracene ?117.8 ± 0.7 kJ mol^?1, and of 1 with 9,10‐dimethoxyanthracene ?91.6 ±0.2 kJ mol^?1. From these data, it follows that the exothermicity of reaction (1+2) is higher than that with 1,3‐butadiene. However, the heat of reaction of 9,10‐dimethylanthracene with 1 (?117.8 kJ mol^?1) is nearly the same as that found for the reaction with the structural C=C counterpart, N‐phenylmaleimide (?117.0 kJ mol^?1). Since the energy of the N=N bond is considerably lower (418 kJ/bond) than that of the C=C bond (611 kJ/bond), it was proposed that this difference in the bond energy can generate a lower barrier of activation in the Diels–Alder cycloaddition reaction with 1. Linear correlation (R = 0.94) of the solvent effect on the rate constants of reaction (1+2) and on the heat of solution of 1 has been observed. The ratio of the volume of activation (?V^≠) and the volume of reaction (?V_r‐n) of the homo‐Diels–Alder reaction (1+2) is considered as “normal”: ?V^≠/?V_r‐n = ?25.1/?30.95 = 0.81. Copyright © 2012 John Wiley & Sons, Ltd.     

Infrared Study of the Hydrogen Bond Complexes Between N-Methylsuccinimide and Phenols

Abstract

The hydrogen bonded complexes between N-methylsuccinimide and phenols (pKa = 10.2 → 6) are investigated by infrared spectrometry. The thermodynamic parameters for the 1–1 complexes are determined in carbon tetrachloride-. The formation constants at 298 K range from 15 to 150 dm³ mol^?1, the enthalpies of complex formation from - 20 to - 30 kJ mol^?1, the changes of entropy from - 22 to - 40 J K^?1 mol^?1 and the frequency shifts of the v(OH) stretching vibration from 170 to 340 cm^?1. The complexes are weaker than those involving the monocarbonyl bases. The decrease of the force constant of the bonded carbonyl group ranges from 0.48 to 0.65 N cm^?1. The force constant of the free C=O group slightly increases upon complex formation, in agreement with the cooperatively theory.     

Computational study on structures,thermochemical properties,and bond energies of disulfide oxygen (S–S–O)‐bridged CH3SSOH and CH3SS(=O)H and radicals

Cleavage of disulfide bonds is a common method used in linking peptides to proteins in biochemical reactions. The structures, internal rotor potentials, bond energies, and thermochemical properties (Δ_fH°, S°, and Cp(T)) of the S–S bridge molecules CH₃SSOH and CH₃SS(=O)H and the radicals CH₃SS?=O and C?H₂SSOH that correspond to H‐atom loss are determined by computational chemistry. Structure and thermochemical parameters (S° and Cp(T)) are determined using density functional Becke, three‐parameter, Lee–Yang–Parr (B3LYP)/6‐31++G (d, p), B3LYP/6‐311++G (3df, 2p). The enthalpies of formation for stable species are calculated using the total energies at B3LYP/6‐31++G (d, p), B3LYP/6‐311++G (3df, 2p), and the higher level composite CBS–QB3 levels with work reactions that are close to isodesmic in most cases. The enthalpies of formation for CH₃SSOH, CH₃SS(=O)H are ?38.3 and ?16.6 kcal mol^?1, respectively, where the difference is in enthalpy RSO–H versus RS(=O)–H bonding. The C–H bond energy of CH₃SSOH is 99.2 kcal mol^?1, and the O–H bond energy is weaker at 76.9 kcal mol^?1. Cleavage of the weak O–H bond in CH₃SSOH results in an electron rearrangement upon loss of the CH₃SSO–H hydrogen atom; the radical rearranges to form the more stable CH₃SS· = O radical structure. Cleavage of the C–H bond in CH₃SS(=O)H results in an unstable [CH₂SS(=O)H]* intermediate, which decomposes exothermically to lower energy CH₂ = S + HSO. The CH₃SS(=O)–H bond energy is quite weak at 54.8 kcal mol^?1 with the H–C bond estimated at between 91 and 98 kcal mol^?1. Disulfide bond energies for CH₃S–SOH and CH3S–S(=O)H are low: 67.1 and 39.2 kcal mol^?1. Copyright © 2011 John Wiley & Sons, Ltd.     

Heterocyclic analogs of phenol as novel potential antioxidants

Five density functional theory (DFT) methods including B3LYP, B3PW91, MPW1K, MPWB, TPSS1KCIS have been evaluated by comparing with the experimental O? H bond dissociation enthalpies (BDEs) of substituted phenols. B3PW91 is found to be the best method, for which the calculation error was 3.62 kJ/mol. Subsequently, the BDEs (O? H) of hydroxyl groups on five‐ and six‐membered heteroatomic aromatic rings have been calculated using the (RO)B3PW91/6‐311++G(2df,2p)//(U)B3LYP/6‐311g(d,p) procedure. In addition, the ionization energy (IE) and proton affinity [PA(O^?)] of these compounds have also been examined. On the basis of our theoretical study, a series of imidazolols, thiazolols, and oxazolols were studied to assess their antioxidant activities. It was found that 5‐oxazolol could be a promising novel antioxidant precursor. Copyright © 2009 John Wiley & Sons, Ltd.     

Theoretical thermochemistry of the C60F18, C60F36, and C60F48 fluorofullerenes

Relative energies of C₆₀F_N fluorofullerenes are reproduced reasonably well at the B3LYP/6- 311G** level of theory employed in conjunction with isodesmic transfluorination reactions, although overestimation of steric repulsions among non-bonded atoms is evident for species with larger values of N. On the other hand, the MNDO method is found to be less suitable for studies of fluorofullerene thermochemistry. The gas-phase standard enthalpy of formation of the C₆₀F₁₈ species is predicted to lie between ?1500 kJ mol^?1 and ?1400 kJ mol^?1.     

UV‐induced transformations of matrix‐isolated 1,3,4‐thiadiazole‐2‐thiones

Monomers of 5‐mercapto‐1,3,4‐thiadiazole‐2‐thione (bismuthiol) were studied using an experimental matrix‐isolation technique as well as by carrying out theoretical quantum chemical calculations. The calculations, performed using the quadratic configuration interaction method with single and double excitations (QCISD)/6‐31++G(d,p)//DFT(B3LYP)/6‐311++G(2d,p), predict that the thione–thiol tautomer of bismuthiol should be significantly (by more than 19 kJ mol^?1) more stable than other tautomeric forms. Accordingly, only the signatures of the thione–thiol tautomer were observed in the FT‐IR spectrum of bismuthiol, recorded directly after deposition of an Ar matrix. UV (λ > 320 nm) irradiation induced the conversion of the thione–thiol tautomer into the dithiol form. Analogous investigations were carried out for two related compounds: 5‐methyl‐1,3,4‐thiadiazole‐2‐thione and 5‐methylthio‐1,3,4‐thiadiazole‐2‐thione. For these two species, only the thione tautomeric forms were observed after deposition of Ar matrices. These tautomers were predicted (by QCISD calculations) to be more stable (by at least 19 kJ mol^?1) than other tautomeric forms. Upon UV irradiation, the most stable thione forms of these compounds were transformed into the corresponding thiol tautomers. Direct observation of the thione → thiol phototautomeric processes provides a clear proof that intramolecular proton transfer reaction can occur in molecules, such as bismuthiol, in spite of the increased NH···S distance, in comparison to other phototautomerizing species studied so far. All the isomers of the studied compounds (substrates and products of the photoreactions) were identified by comparison of their IR spectra with the spectra calculated at the DFT(B3LYP)/6‐311++G(2d,p) level of theory for possible isomeric structures. Copyright © 2009 John Wiley & Sons, Ltd.     

Hardening and thermal stability of nanocrystalline AlMg4.8 powder

Ball milled nanocrystalline AlMg4.8 powder was investigated in terms of hardening and thermal stability. The validity of the Hall–Petch relation was confirmed down to the minimum grain size of ～44 nm. Prolonged milling in the range of the minimum grain size still increased the hardness. This development is discussed in terms of contamination effects and the influence of full and partial dislocations. Concerning thermal stability, recovery processes occur in the range of 100–230°C, whereas substantial grain growth starts at a temperature of ～250°C. The enthalpy release for recovery was detected to be ～39 J mol^?1 and ～208 J mol^?1 for grain growth. Dynamic strain ageing was indicated by an activation energy for recovery of Q?～?120 kJ mol^?1. The activation energy of grain growth was calculated by means of the Kissinger theory (Q?=?200–210 kJ mol^?1) and using the results of static grain growth (Q?=?204 kJ mol^?1).     

Infrared and Raman Spectra,conformations, ab initio calculations and spectral assignments of 1,3‐disilabutane (SiH3CH2SiH2CH3)

Raman spectra of 1,3‐disilabutane (SiH₃CH₂SiH₂CH₃) as a liquid were recorded at 293 K and as a solid at 78 K. In the Raman cryostat at 78 K an amorphous phase was first formed, giving a spectrum similar to that of the liquid. After annealing to 120 K, the sample crystallized and large changes occurred in the spectra since more than 20 bands present in the amorphous solid phase vanished. These spectral changes made it possible to assign Raman bands to the anti or gauche conformers with confidence. Additional Raman spectra were recorded of the liquid at 14 temperatures between 293 and 137 K. Some Raman bands changed their peak heights with temperature but were countered by changes in linewidths, and from three band pairs assigned to the anti and gauche conformers, the conformational enthalpy difference Δ_confH(gauche–anti) was found to be 0 ± 0.3 kJ mol⁻¹ in the liquid. Infrared spectra were obtained in the vapor and in the liquid phases at ambient temperature and in the solid phases at 78 K in the range 4000–400 cm⁻¹. The sample crystallized immediately when deposited on the CsI window at 78 K, and many bands present in the vapor and liquid disappeared. Additional infrared spectra in argon matrixes at 5 K were recorded before and after annealing to temperatures 20–34 K. Quantum chemical calculations were carried out at the HF, MP2 and B3LYP levels with a variety of basis sets. The HF and DFT calculations suggested the anti conformer as the more stable one by ca 1 kJ mol⁻¹, while the MP2 results favored gauche by up to 0.4 kJ mol⁻¹. The Complete Basis Set method CBS‐QB3 gave an energy difference of 0.1 kJ mol⁻¹, with anti as the more stable one. Scaled force fields from B3LYP/cc‐pVQZ calculations gave vibrational wavenumbers and band intensities for the two conformers. Copyright © 2007 John Wiley & Sons, Ltd.     

4‐Phenyl‐1,2,4‐triazoline‐3,5‐dione in the ene reactions with cyclohexene, 1‐hexene and 2,3‐dimethyl‐2‐butene. The heat of reaction and the influence of temperature and pressure on the reaction rate

The values of the enthalpy (53.3; 51.3; 20.0 kJ mol^?1), entropy (?106; ?122; ?144 J mol^?1K^?1), and volume of activation (?29.1; ?31.0; ?cm³ mol^?1), the reaction volume (?25.0; ?26.6; ?cm³ mol^?1) and reaction enthalpy (?155.9; ?158.2; ?150.2 kJ mol^?1) have been obtained for the first time for the ene reactions of 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione 1 , with cyclohexene 4 , 1‐hexene 6 , and with 2,3‐dimethyl‐2‐butene 8 , respectively. The ratio of the values of the activation volume to the reaction volume (?V^≠_corr/ΔV_{r ? n}) in the ene reactions under study, 1 + 4 → 5 and 1 + 6 → 7 , appeared to be the same, namely 1.16. The large negative values of the entropy and the volume of activation of studied reactions 1 + 4 → 5 and 1 + 6 → 7 better correspond to the cyclic structure of the activated complex at the stage determining the reaction rate. The equilibrium constants of these ene reactions can be estimated as exceeding 10¹⁸ L mol^?1, and these reactions can be considered irreversible. Copyright © 2014 John Wiley & Sons, Ltd.     

Catalysis by hydrogen chloride in the gas‐phase elimination kinetics of 2‐phenyl‐2‐propanol and 3‐methyl‐1‐buten‐3‐ol

A homogeneous, molecular, gas‐phase elimination kinetics of 2‐phenyl‐2‐propanol and 3‐methyl‐1‐ buten‐3‐ol catalyzed by hydrogen chloride in the temperature range 325–386 °C and pressure range 34–149 torr are described. The rate coefficients are given by the following Arrhenius equations: for 2‐phenyl‐2‐propanol log k₁ (s^?1) = (11.01 ± 0.31) ? (109.5 ± 2.8) kJ mol^?1 (2.303 RT)^?1 and for 3‐methyl‐1‐buten‐3‐ol log k₁ (s^?1) = (11.50 ± 0.18) ? (116.5 ± 1.4) kJ mol^?1 (2.303 RT)^?1. Electron delocalization of the CH₂?CH and C₆H₅ appears to be an important effect in the rate enhancement of acid catalyzed tertiary alcohols in the gas phase. A concerted six‐member cyclic transition state type of mechanism appears to be, as described before, a rational interpretation for the dehydration process of these substrates. Copyright © 2007 John Wiley & Sons, Ltd.     

Joint theoretical and experimental study of the gas‐phase elimination kinetics of tert‐butyl ester of carbamic,N, N‐dimethylcarbamic,N‐hydroxycarbamic acids and 1‐(tert‐butoxycarbonyl)‐imidazole

The gas‐phase elimination kinetics of the title compounds were carried out in a static reaction system and seasoned with allyl bromide. The working temperature and pressure ranges were 200–280 °C and 22–201.5 Torr, respectively. The reactions are homogeneous, unimolecular, and follow a first‐order rate law. These substrates produce isobutene and corresponding carbamic acid in the rate‐determining step. The unstable carbamic acid intermediate rapidly decarboxylates through a four‐membered cyclic transition state (TS) to give the corresponding organic nitrogen compound. The temperature dependence of the rate coefficients is expressed by the following Arrhenius equations: for tert‐butyl carbamate logk₁ (s^?1) = (13.02 ± 0.46) – (161.6 ± 4.7) kJ/mol(2.303 RT)^?1, for tert‐butyl N‐hydroxycarbamate logk₁ (s^?1) = (12.52 ± 0.11) – (147.8 ± 1.1) kJ/mol(2.303 RT)^?1, and for 1‐(tert‐butoxycarbonyl)‐imidazole logk₁ (s^?1) = (11.63 ± 0.21)–(134.9 ± 2.0) kJ/mol(2.303 RT)^?1. Theoretical studies of these elimination were performed at Møller–Plesset MP2/6‐31G and DFT B3LYP/6‐31G(d), B3LYP/6‐31G(d,p) levels of theory. The calculated bond orders, NBO charges, and synchronicity (Sy) indicate that these reactions are concerted, slightly asynchronous, and proceed through a six‐membered cyclic TS type. Results for estimated kinetic and thermodynamic parameters are discussed in terms of the proposed reaction mechanism and TS structure. Copyright © 2007 John Wiley & Sons, Ltd.     

Molecular vibrations and lattice dynamics of ortho-terphenyl

Infrared and Raman spectra of crystalline, melted and solvated ortho-terphenyl and its perdeuterated isotopomer, D₁₄-ortho-tephenyl, have been recorded. Optimized geometries and vibrational frequencies were calculated by the semiempirical RHF/AM1 method and by DFT using the B3LYP functional and 6–31G(d) basis set. In both cases the lowest energy conformation is of C₂ symmetry. With the scaled AM1 and B3LYP/6-31G(d) force fields the average error in reproducing the experimental molecular vibrational frequencies is 13cm^?1 and 5cm^?1, respectively. The AM1 potential energy surface for phenyl torsions was mapped on a 15° grid. The barrier to concerted internal rotation is estimated to lie between 3 kJ mol^?1 and 6kJ mol^?1. The calculations of the lattice dynamics at k = 0 in the low temperature fully ordered crystal phase of parent and deuterated ortho-terphenyl were performed with inclusion of six low lying intramolecular vibrations. The conformational change of the ortho-terphenyl molecule induced by crystal packing forces was taken into account by re-defining the unperturbed molecular vibrational state. Although an accurate assignment of lattice vibrations was not possible, the calculated spectra give quite a reasonable picture of the low frequency dynamics in crystalline ortho-terphenyl. The relevance of the results obtained to the glass forming property of ortho-terphenyl is discussed.     

Experimental and theoretical study of the mechanism for the kinetic of elimination of methyl carbazate in the gas phase

The elimination kinetic of methyl carbazate in the gas phase was determined in a static system over the temperature range of 340–390 °C and pressure range of 47–118 Torr. The reaction is homogeneous, unimolecular, and obeys a first order rate law. The decomposition products are methyl amine, nitrous acid, and CO gas. The variation of the rate coefficients with temperatures is given by the Arrhenius expression: log k₁ (s^?1) = (11.56 ± 0.34) ? (180.7 ± 4.1) kJ mol^?1(2.303 RT)^?1. The estimated kinetics and thermodynamics parameters are in good agreement to the experimental values using B3LYP/6‐31G (d,p), and MP2/6‐31G (d,p) levels of theory. These calculations imply a molecular mechanism involving a concerted non‐synchronous quasi three‐membered ring cyclic transition state to give an unstable intermediate, 1,2‐oxaziridin‐3‐one. Bond order analysis and natural charges implies that polarization of O (alkyl)? C (alkyl) bond of the ester is rate determining in this reaction. Copyright © 2008 John Wiley & Sons, Ltd.     

Structures,vibrational spectra,and relative energetics of FC(O)ONO and FC(O)NO2 isomers at DFT and ab initio levels

The structural and vibrational parameters of FC(O)ONO and FC(O)NO₂ isomers were examined theoretically using the B3LYP/6-311+G(3df) and CCSD(T)/6-311G(d) methods. Four conformers of FC(O)ONO isomer and one FC(O)NO₂ isomer are found here. Among them, the trans–cis and cis–cis FC(O)ONO configuration are new conformers. The energetics were refined with G3//B3LYP and CBS-QB3 calculations. The trans–trans conformer of the FC(O)ONO isomer is found to be the lowest energy structure, with an estimated heat of formation of ?104.9 kcal mol^?1 at 0 K as determined from CBS-QB3 theory. The next lowest structure is the cis–trans FC(O)ONO lying 1.7 kcal mol^?1 above the trans–trans structural form. The highest energy structure is the FC(O)NO₂ isomer with a predicted heat of formation of ?84.8 kcal mol^?1. A comparison of the relative stability of the FCNO₃ isomers with the isomers of ClCNO₃ shows that the Cl analogues follow the same pattern of stability, as do the F isomers. However, the chlorine isomers are unstable relative to their fluorine analogues.     

Energetics,electronic structures and geometries of naphthalene,quinoline and isoquinoline analogues of 1,2-didehydrobenzene

B3LYP/cc-pVTZ electronic structure calculations employed in conjunction with additive corrections derived from experimental data for 1,2-didehydrobenzene predict the standard enthalpies of formation of 1,2- and 2,3-didehydronaphthalenes to be equal to 121.0 and 123.7 kcal mol^?1, respectively. The corresponding singlet-triplet splittings amount to 40.1 and 35.4 kcal mol^?1. The positional dependence of both of these quantities is preserved in those didehydroquinolines and didehydroisoquinolines in which the didehydrogenation sites are separated by at least one carbon from the heteroatoms. The effect of the adjacent heteroatoms on the singlet-triplet splittings is significantly more pronounced than that on the standard enthalpies of formation. Test G3 calculations on 2,3-didehydronaphthalene confirm the reliability of the additive correction scheme in the prediction of properties of annelated analogues of 1,2-didehvdrobenzene. Such a scheme opens an avenue to facile electronic structure calculations on didehydrogenation reactions of polycondensed heterocyclic compounds with six-membered rings.