Framework‐Substituted Bismuth Zeolite‐P: Synthesis and Characterization

Bismuth‐modified zeolite‐P (Bi‐ZP) was synthesized by hydrothermal methods during the phase transformation of analcime to zeolite‐P. The evolution of phase transformation of pure analcime to Bi‐ZP was investigated. The results showed that bismuth atoms were incorporated into the framework of the microporous zeolite‐P. The effect of various Bi/Al (0–3) and Si/Bi (1–5) mole ratios on the synthesis of bismuth modified zeolite were studied by X‐ray diffraction (XRD) technique and FT‐IR spectroscopy. Evolution of the growth process of Bi‐ZP spheres was carried out at different time intervals with XRD patterns and FE‐SEM images. The energy dispersive X‐ray (EDX) spectrum indicated the existence of bismuth atoms in the synthesized Bi‐ZP. Framework substitutions of bismuth were evidenced by a set of complementary characterizations such as diffusive reflectance UV/Vis (DRS) and Raman spectroscopy on the synthesized Bi‐ZP (Si/Bi = 1).     

Na2O-SiO2-Al2O3-NaCl-H2O体系中ANA和SOD沸石膜的水热合成

Na2O-SiO2-Al2O3-NaCl-H2O体系中，以水玻璃和准一水软铝石为原料，分别在 堇青石和玻璃载体上水热合成方沸石（ANA）和方钠石（SOD）沸石膜。研究水含量 、反应温度、反应时间与多次合成对膜结晶的影响。用XRD，SEM，EDX表征膜的晶 相、形貌和化学组成。堇青石负载方沸石膜在对95％（wt.)乙醇水溶液的渗透蒸发 实验中，水优先透过沸石膜的选择性显示了晶间孔的醇／水分离作用。非计量的 NaCl进入到在玻璃载体上成膜的方钠石笼中，致使该膜显示光致变色效应。     

Na_2O-SiO_2-Al_2O_3-NaCl-H_2O体系中ANA和SOD沸石膜的水热合成

Na2 O SiO2 Al2 O3 NaCl H2 O体系中,以水玻璃和准一水软铝石为原料,分别在堇青石和玻璃载体上水热合成方沸石(ANA)与方钠石(SOD)沸石膜.研究水含量、反应温度、反应时间与多次合成对膜结晶的影响.用XRD,SEM,EDX表征膜的晶相、形貌和化学组成.堇青石负载方沸石膜在对 95 %(wt.)乙醇水溶液的渗透蒸发实验中,水优先透过沸石膜的选择性显示了晶间孔的醇/水分离作用.非计量的NaCl进入到在玻璃载体上成膜的方钠石笼中,致使该膜显示光致变色效应     

Synthesis of Aluminum‐Rich Analcime Using an Ethylene Diamine Derivative as Template

The hydrothermal synthesis of analcime (ANA) with N,N′‐dibenzyl‐N,N,N′,N′‐tetramethylethylenediamine (DBTMED) as template was systematically studied. The various parameters that affect the crystallization of analcime, such as temperature, time, Al source, and Si/Al ratio were investigated. Systematic variations of these parameters revealed that ANA was obtained from the reaction mixture with the optimized ratios of SiO₂/Al₂O₃ = 5–9.5 in presence of DBTMED, whereas template‐free clear solution methods require SiO₂/Al₂O₃ ratio of greater than 25. When experiments were conducted at 130 and 150 °C for 4 days, a mixture of analcime and zeolite P was present in the samples, and a pure analcime sample could be obtained with heating in the temperature range 160–180 °C. When microwave and conventional heating were used, analcime could be obtained after 2 days. The obtained products were characterized by XRD, SEM, and IR spectroscopy.     

Recrystallization of Zeolite Y to Analcime and Zeolite P with <SC>d</SC>‐Methionine as Structure‐Directing Agent (SDA)

In this study, the synthesis of template free zeolite Y and its recrystallization to two types of pure zeolite P and analcime in the presence of the amino acid d‐methionine as structure‐directing agent were investigated. The recrystallization occurred solely when specific heating cycles were applyed. A completely crystallized phase of zeolite Y for the mixture of zeolite P and analcime was observed in the presence of d‐methionine at a concentration of 0.015 <SC>m</SC>. The effect of different Si/Al ratios (2.3–9.3), crystallization temperatures (40–160 °C), and crystallization times (28–96 hours) on the achievement of two different zeolite types were studied as well. Pure zeolite P was obtained during conventional heating to 100 °C for 42 hours, whereas pure analcime zeolite was achieved by heating the mixture to 160 °C for 96 hours. The products were characterized by X‐ray diffraction, scanning electron microscopy, and IR spectroscopy.     

The success of dual‐functional templating for synthesizing hierarchical analcime zeolite

Novel and innovative hierarchical analcime zeolites were prepared by adding a gemini surfactant which acted as a dual‐functional template. Through a one‐step hydrothermal process, a hierarchical analcime zeolite with abundant intracrystalline mesopores was synthesized. Powder X‐ray diffraction and N₂ adsorption–desorption data show that the mesoporous composites possess both a quite a number of mesopores and analcime structure. The results suggest that the dual‐functional template can be effective in the synthesis of hierarchical analcime zeolites.     

Multiple Zeolite Structures from One Ionic Liquid Template

This study reports the use of 1‐butyl‐3‐methyl imidazolium methanesulfonate ionic liquid as a template in the synthesis of zeolites. It is found that the silicon source determines the formation of beta (BEA), mordenite framework inverted (MFI), or analcime (ANA) zeolites. Depending on this source, different preorganized complexes are obtained that drive the formation of the different zeolite structures. In the presence of ethanol, the ionic liquid form preorganized complexes that drive the formation of MFI. In its absence, BEA is obtained. Whereas, the large amount of sodium present when using sodium metasilicate leads to ANA formation. A molecular simulation study of the relative stability of the template‐framework system and location of the template provides further insight into the mechanism of synthesis.     

Coordination compounds of 3d-metals salicylates with thiosemicarbazide

Complexes of copper(II), nickel(II), cobalt(III), zinc(II), and iron(III) salicylates with thiosemicarbazide were synthesized. The resulting compounds were characterized by the elemental analysis data, infrared spectroscopy, diffuse reflectance spectroscopy, and thermogravimetry.     

铁掺杂方沸石的合成及其磁性化

采用水热合成法, 按摩尔比n(SiO2):n(Al2O3):n(Na2O):n(Fe3+):n(H2O)=2.3:1:3.9:(0.02, 0.04, 0.08):185配料, 三乙胺为模板剂, 草酸为铁离子的络合剂, 经过室温搅拌成胶, 170 ℃下于不锈钢反应釜晶化60 h, 合成了三种掺杂铁量不同的方沸石, 为了解决粉末沸石分子筛难以从使用料液中分离问题, 对合成铁掺杂方沸石700 ℃下进行氢气还原制得了磁性沸石. 利用X射线衍射(XRD)、傅立叶变换-红外(FT-IR)光谱和扫描电子显微镜(SEM)对制得的产品进行表征. 结果表明, 合成的铁掺杂方沸石与纯方沸石结构相同, 磁性化沸石结构发生了变化. 考察样品对水中氟离子和铅离子的吸附性能发现, 铁掺杂方沸石和磁性沸石对它们的吸附性能没有促进作用.     

Synthesis and Characterization of a Novel Phenol‐tailed Porphyrin Ligand and Its Iron(III) Complex

The phenol‐tailed porphyrin ligand, H₃L was synthesized as a model compound for catalases. H₃L and its corresponding iron complex [Fe(L)] were synthesized by using the precursor, 5‐(8‐ethoxycarbonyl‐1‐naphthyl)‐10, 15, 20‐triphenyl porphyrin (ENTPP). They were characterized by ¹H NMR spectroscopy, mass spectrometry, X‐ray crystallography, and cyclic voltammetry. All the results have confirmed that the phenol group is covalently attached to the porphyrin. In the iron complex, phenolate oxygen is coordinated to iron(III) as the fifth ligand, leading to the five‐coordinate high‐spin iron(III) species.     

方沸石对Cd2+离子的交换性能研究

在静态条件下,研究了温度、浓度、pH值等条件对方沸石与Cd2 离子交换的影响;探讨了当溶液中有其它阳离子共存时对方沸石与cd2 的交换的影响;考察了方沸石时模拟废水中的重金属离子的去除效果.结果表明,方沸石能够有效去除废水中的cd2 ,去除率可达90.0%以上.     

Metalloporphyrin mixed-valence π-cation radicals: [Fe(oxoOEC(•/2))(Cl)]2SbCl6, structure, magnetic properties, and near-IR spectra

The preparation and characterization of a mixed-valence π-cation radical derivative of an iron(III) oxochlorinato complex is reported. The new complex has been synthesized by the one-electron oxidation of a pair of [Fe(oxoOEC)(Cl)] molecules to form the dimeric cation [Fe(oxoOEC)(Cl)]??. The cation has been characterized by X-ray analysis, M?ssbauer spectroscopy, UV-vis and near-IR spectroscopy, and magnetic susceptibility measurements from 6-300 K. The crystal structure shows that the two rings have a smaller overlap area than those of the formally related nickel and copper octaethylporphinate derivatives, reflecting the larger steric congestion at the periphery in part of the oxochlorin rings. The M?ssbauer data is consistent with two equivalent iron(III) centers. The unpaired electron is delocalized over the two oxochlorin rings and mediates a strong antiferromagnetic interaction between the high-spin iron(III) centers.     

Static and Ultrasonic‐assisted Aging Effects on the Synthesis of Analcime Zeolite

The synthesis of zeolite ANA under static hydrothermal conditions was performed accompanied by an additional static and ultrasonic‐assisted aging of the reaction mixture prior to crystallization. The aging process was compared with stirring‐assisted aging, microwave‐assisted aging and syntheses without any aging. The influence of aging time on the crystallization time of zeolite ANA was investigated. The static and ultrasonic‐assisted aging can shorten the crystallization time of the ANA phase. Moreover, ultrasonic‐assisted aging leads to altered morphologies of the particles. The products were characterized by X‐ray diffraction (XRD) and scanning electron microscopy (SEM).     

Iron(III), cobalt(II) and copper(II) complexes bearing 8‐quinolinol encapsulated in zeolite?Y for the aerobic oxidation of styrene

A series of Fe(III), Co(II) and Cu(II) complexes of 8‐quinolinol were encapsulated into the supercages of zeolite? Y and characterized by X‐ray diffraction, SEM, N₂ adsorption/desorption, FT‐IR, UV–vis spectroscopy, elemental analysis, ICP‐AES and TG/DSC measurements. The encapsulation was achieved by a flexible ligand method in which the transition metal cations were first ion‐exchanged into zeolite Y and then complexed with 8‐quinolinol ligand. The metal‐exchanged zeolites, metal complexes encapsulated in zeolite–Y plus non‐encapsulated homogeneous counterparts were all screened as catalysts for the aerobic oxidation of styrene under mild conditions. It was found that the encapsulated complexes always showed better activity than their respective non‐encapsulated counterparts. Moreover, the encapsulated iron complex showed good recoverability without significant loss of activity and selectivity within successive runs. Heterogeneity test for this catalyst confirmed its high stability against leaching of active complex species into solution. Copyright © 2011 John Wiley & Sons, Ltd.     

Polypropylene composites filled by magnesium hydroxide coprecipitated with foreign ions

Rod‐like magnesium hydroxide (MH) particles were prepared via coprecipitation of the magnesium salt with foreign ions, such as copper(II), zinc(II), iron(III), and nickel(II). Flame retardant polypropylene (PP) composites were fabricated using these particles. The microstructure, flame retardation, mechanical properties, thermal behavior, and oxidation‐induced temperature were characterized. It was found that foreign ion compounds increased the flame retardancy. MH containing a zinc compound presented a similar performance as that of neat MH. The presence of a copper compound decreased the thermal behavior and mechanical properties of the flame retardant composite, while iron and nickel compounds brought some improvements. In addition, the thermal degradation mechanisms of the flame retardant composites were investigated by Fourier transform infrared (FTIR) spectroscopy at different temperatures. Copyright © 2008 John Wiley & Sons, Ltd.     

以方沸石负载Ni(II)催化剂修饰的电极电氧化甲醇Seyed Naser Azizi,Shahram Ghasemi,Neda Salek Gilani简

There is a high overvoltage in the oxidation of methanol in fuel cells, and so modified electrodes are used to decrease it. A modified electrode that used Ni(Ⅱ) loaded analcime zeolite to catalyze the electrooxidation of methanol in alkaline solution was proposed. Analcime zeolite was synthesized by hydrothermal synthesis, and Ni(Ⅱ) ions were incorporated into the analcime structure, which was then mixed with carbon paste to prepare modified electrode. The electrocatalytic oxidation of methanol on the surface of the modified electrode in alkaline solution was investigated by cyclic voltammetry and chronoamperometry. The effects of the scan rate of the potential, concentration of methanol, and amount of zeolite were investigated. The rate constant for the catalytic reaction of methanol was 6×10³ cm³ mol^-1 s^-1 from measurements using chronoamperometry. The proposed electrode significantly improved the electron transfer rate and decreased the overpotential for methanol oxidation.     

A New Iron(II) Complex with Strongly Saddle Shaped Schiff Base like Ligand

The synthesis of two new Schiff base like ligands containing a 1, 8‐diaminonaphthalene unit in order to improve π–π interactions between the molecules is described. The corresponding iron(II), copper(II), and nickel(II) complexes were synthesized and characterized using NMR spectroscopy, magnetic measurements, and for the iron(II) complex X‐ray structure analysis. The crystal structure shows a strongly saddle shaped ligand. In contrast to related complexes with a phenylene unit that prefer an octahedral coordination sphere, this complex crystallizes pentacoordinate. The keto‐group of a neighboring complex serves as axial ligand resulting in the formation of infinite chains. Magnetic susceptibility measurements reveal nearly ideal curie behavior for the copper(II) and the iron(II) complex.     

四氮大环-金属配合物与DNA作用的电化学及谱学研究

Mononuclear copper（Ⅱ）, nickel（Ⅱ） and cobalt（Ⅲ） tetracoordinate macrocyclic complexes were synthesized and spectroscopically characterized. The crystal structure of the three compounds were determined by X-ray crystallography. The electrochemical experimental results indicate that the three complexes could interact with DNA mainly by electrostatic interaction. The interaction of tetracoordinate macrocyclic cobalt（Ⅲ） complex with DNA was studied by cyclic voltammetry and UV-vis spectroscopy. The experimental results reveal that tetracoordinate macrocyc- lic cobalt（Ⅲ） complex could interact with DNA by electrostatic interaction to form a 1 ： 1 DNA association complex with a binding constant of 7.50 ×10^3 L·mol^-1.     

A Bis(μ‐oxido)dinickel(III) Complex with a Triplet Ground State

A bis(μ‐oxido)dinickel(III) complex was synthesized and characterized by single crystal X‐ray diffraction, resonance Raman, and ESI‐mass measurements. Magnetic susceptibility measurements by SQUID and EPR spectroscopy reveal that the complex has a triplet ground state, which is unprecedented for high‐valent metal (M) complexes with [M₂(μ‐O)₂] diamond core. DFT studies indicate ferromagnetic coupling of the nickel(III) centers. The complex exhibits hydrogen abstraction reactivity and oxygenation reactivity toward external substrates.     

Polymer Supported Schiff Base Complexes of Iron(III), Cobalt(II) and Nickel(II) Ions and their Catalytic Activity in Oxidation of Phenol and Cyclohexene

The polymer supported transition metal complexes of N,N′‐bis (o‐hydroxy acetophenone) hydrazine (HPHZ) Schiff base were prepared by immobilization of N,N′‐bis(4‐amino‐o‐hydroxyacetophenone)hydrazine (AHPHZ) Schiff base on chloromethylated polystyrene beads of a constant degree of crosslinking and then loading iron(III), cobalt(II) and nickel(II) ions in methanol. The complexation of polymer anchored HPHZ Schiff base with iron(III), cobalt(II) and nickel(II) ions was 83.30%, 84.20% and 87.80%, respectively, whereas with unsupported HPHZ Schiff base, the complexation of these metal ions was 80.3%, 79.90% and 85.63%. The unsupported and polymer supported metal complexes were characterized for their structures using I.R, UV and elemental analysis. The iron(III) complexes of HPHZ Schiff base were octahedral in geometry, whereas cobalt(II) and nickel(II) complexes showed square planar structures as supported by UV and magnetic measurements. The thermogravimetric analysis (TGA) of HPHZ Schiff base and its metal complexes was used to analyze the variation in thermal stability of HPHZ Schiff base on complexation with metal ions. The HPHZ Schiff base showed a weight loss of 58% at 500°C, but its iron(III), cobalt(II) and nickel(II) ions complexes have shown a weight loss of 30%, 52% and 45% at same temperature. The catalytic activity of metal complexes was tested by studying the oxidation of phenol and epoxidation of cyclohexene in presence of hydrogen peroxide as an oxidant. The supported HPHZ Schiff base complexes of iron(III) ions showed 64.0% conversion for phenol and 81.3% conversion for cyclohexene at a molar ratio of 1∶1∶1 of substrate to catalyst and hydrogen peroxide, but unsupported complexes of iron(III) ions showed 55.5% conversion for phenol and 66.4% conversion for cyclohexene at 1∶1∶1 molar ratio of substrate to catalyst and hydrogen peroxide. The product selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was 90.5% and 96.5% with supported HPHZ Schiff base complexes of iron(III) ions, but was found to be low with cobalt(II) and nickel(II) ions complexes of Schiff base. The selectivity for catechol (CTL) and epoxy cyclohexane (ECH) was different with studied metal ions and varied with molar ratio of metal ions in the reaction mixture. The selectivity was constant on varying the molar ratio of hydrogen peroxide and substrate. The energy of activation for epoxidation of cyclohexene and phenol conversion in presence of polymer supported HPHZ Schiff base complexes of iron(III) ions was 8.9 kJ mol^?1 and 22.8 kJ mol^?1, respectively, but was high with Schiff base complexes of cobalt(II) and nickel(II) ions and with unsupported Schiff base complexes.