Polybutylene terephthalate reactive blending with polymethylhydrosiloxane by ruthenium‐catalyzed carbonyl hydrosilylation reaction

Carbonyl hydrosilylation reaction was developed to prepare reactive blending between PBT and polymethylhydrosiloxane (PMHS). It focused on the addition reaction of Si–H groups from PMHS onto carbonyl groups from PBT catalyzed by triruthenium dodecacarbonyl (Ru₃(CO)₁₂). An approach on PBT model compounds was carried out and investigated by NMR spectroscopy to evidence the potentiality and efficiency of carbonyl hydrosilylation reaction. At temperatures up to 100 °C, the hydrosilylation reaction can reach 33 mol% conversion in a few hours. Side reactions were also highlighted. Such side reactions can reach more than 23 mol% of the final products when temperature increases to 180 °C. Then hydrosilylation reaction was extended to PBT modification with a molar ratio of ester group/SiH = 3.5 and viscosity ratio polysiloxane/PBT = 4.0 × 10^?5. The reaction was carried out in an internal mixer at 220 °C and followed through the evolution of the torque of the reactional medium. Samples for different processing times were investigated by SEM and rheology. From these analyses, the dispersion of PMHS was promoted with diameters of few micrometers. The elastic behavior of final material was characteristic of solid or gel‐like structures, suggesting a network structure formation consistent with the gel fraction increase from 0 to 0.55. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1855–1868     

Functionalization of surface‐grafted polymethylhydrosiloxane thin films with alkyl side chains

Thin films of crosslinked polymethylhydrosiloxane (PMHS) have been grafted on silica using the sol–gel process allowing further functionalization by effective quantitative hydrosilylation of SiH groups by olefins within the network. Postfunctionalization gives the polysiloxane network with n‐alkyl side chains. The PMHS coating was prepared by room temperature polycondensation of a mixture of methyldiethoxysilane HSiMe(OEt)₂ monomer and triethoxysilane HSi(OEt)₃ (TH) as crosslinker. The surface‐attached films are chemically stable and covalently bonded to the silica surface. Subsequently, films were functionalized without delamination. We showed by FTIR spectroscopy how the crosslinking ratio and the molecular size of the alkenes precursors influence the extent of the hydrosilylation reaction of SiH groups in the PMHS network. We have determined that quasi‐full olefin addition catalyzed by a platinum complex occurred within soft networks of less than 5% TH with 1‐alkenes CH₂?CH(CH₂)_n‐2CH₃ of various alkyl chain lengths (n = 5, 11, 17). Powders of PMHS gel were also modified with 1‐alkenes by hydrosilylation. The SiH groups within the soft gel (5% crosslinked) were fully functionalized as shown by ²⁹Si and ¹H solid‐state NMR. The structure of functionalized polysiloxane with n‐octadecyl and n‐dodecyl side chains was studied by FTIR, wide angle X‐ray diffraction, and DSC showing crystallization of the long n‐alkyl chains in the network. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3546–3562, 2008     

Influence of interfaces on the rates of crosslinking in poly(dimethyl siloxane) coatings

We have determined with infrared spectroscopic ellipsometry how the nature of the interface between a thin poly(dimethyl siloxane) (PDMS) coating and its substrate affects the rate of PDMS crosslinking reactions. Reactions between vinyl (? CH?CH₂) end groups on PDMS and silyl (SiH) groups in a crosslinker (hydrosilylation) and between SiH groups and silanol (SiOH) groups, during the so‐called postcure crosslinking stage, have been probed in situ. The overall consumption of SiH follows first‐order reaction kinetics. The first‐order reaction coefficient (k₁) for the hydrosilylation crosslinking reaction is the same for coatings on three different substrates: native oxide on silicon (SiO₂/Si), polystyrene (PS), and poly(ethylene terephthalate). For the slower postcure reactions, however, the rate of SiH consumption depends on the substrate. In 2.5‐μm PDMS coatings on PS, k₁ is about seven times greater than k₁ in the same coating on SiO₂/Si. In PDMS coatings on a PDMS substrate, when the effect of the interface is thus minimal, k₁ is 16 times higher than on SiO₂/Si. The dependence of k₁ on the type of interface is probably the result of the interfacial segregation and complexation of the Pt catalyst for the postcure reactions. We propose that polar surfaces more strongly attract Pt and form complexes that inhibit the postcure reactions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1421–1431, 2004     

Syntheses and characterizations of bis(trialkoxysilyl)oligoimides. II. Syntheses and characterizations of fluorinated crosslinkable oligoimides with low refractive indices

Novel crosslinkable fluorinated oligoimides were prepared in two steps. The first involved the synthesis of oligoimides terminated with nadic or allylic double bonds, and the second step was materialized either by a radical addition of mercaptotrialkoxysilane derivatives onto nadic double bonds or a hydrosilylation reaction of hydrogenotrialkoxysilane derivative onto allylic double bonds. Three kinds of crosslinking of the trialkoxysilane end groups were studied. The first kind entailed a thermal self‐crosslinking of trialkoxysilane groups. The second process of crosslinking incorporated a bicomponent system—the crosslinked agent was 1,1,1‐tris(4‐hydroxyphenyl)ethane (TRIOH). The trialkoxysilane groups reacted with the hydroxyl–phenol groups of TRIOH to give thermally stable phenoxysilane bonds as well as a crosslinking network. The last method was also a bicomponent system; the oxalic acid was added into an oligoimide solution where by thermal treatment water was created. The water molecules hydrolyzed the trialkoxysilane groups into silanol groups that polycondensed into a crosslinked network following a sol–gel process. The mechanism of the different crosslinking reactions was investigated by Fourier transform infrared spectroscopy and solid‐state ²⁹Si NMR. The self‐crosslinked material prepared from precursor α,ω‐trimethoxysilyl fluorinated oligomer (M_n = 5500 g · mol^?1) exhibited a 10 wt % loss temperature under air higher than 420 °C and a low birefringence (Δn = 0.008) at 1.300 μm. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2602–2619, 2001     

Functional polysiloxanes. II. Neighboring effect in the hydrosilylation of poly(hydrogenmethylsiloxane‐co‐dimethylsiloxane)s by allylglycidylether

Polysiloxanes bearing epoxy groups as lateral substituents were prepared by the hydrosilylation of 1‐allyloxy‐2,3‐epoxypropane (allylglycidylether) with poly(hydrogenmethylsiloxane‐co‐dimethylsiloxane)s (D^H‐D copolymers) of various compositions. To determine the optimal conditions of the hydrosilylation catalyzed by hexachloroplatinic acid, the kinetics of the reaction were investigated for the poly(hydrogenmethylsiloxane) homopolymer. The reaction was first order in platinum, first order in double bonds, and 0.5 in SiH. This kinetic law was consistent with the hypothesis that hydrogenmethylsiloxane dyads are much more reactive than isolated units, which may be explained by the simultaneous insertion of two vicinal SiH's in a binuclear complex of platinum. This peculiar type of neighboring effect was investigated further by comparison of the kinetics of the hydrosilylation of D‐D^H copolymers of various compositions and D^H block lengths and was confirmed by the microstructure of a D‐D^H copolymer (50/50) before and after partial hydrosilylation. Triad analysis by ²⁹Si NMR showed that the resulting copolymer was not statistical but contained a high proportion of isolated SiH. This explains why hydrosilylation proceeded in two steps: a fast reaction of D^H‐D^H dyads and a slow reaction of the remaining isolated D^H units. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 837–845, 2000     

Pyrolytic conversion of an Al?Si?N?C precursor prepared via hydrosilylation between [Me(H)SiNH]4 and [HAlN(allyl)]m[HAlN(ethyl)]n

An iminoalane‐silazane polymer (ISP), an Al? Si? N? C precursor, has been synthesized via Pt‐catalyzed hydrosilylation between poly(allyl iminoalane‐co‐ethyl iminoalane) {[HAlN(allyl)]_m[HAlN (ethyl)]_n, AE‐alane} and 1,3,5,7‐tetrahydro‐1,3,5,7‐tetramethylcyclotetrasilazane {[Me(H)SiNH]₄, TCS}. The IR and ¹H NMR spectra of ISP indicate that the relative amounts of the allyl groups decrease slightly in comparison with those of AE‐alane, suggesting that hydrosilylation occurs partially. TG analysis up to 900 °C reveals that the ceramic yield of ISP is 83.1 mass%. It is suggested that the high ceramic yield can be ascribed to cross‐linking reactions occurring during pyrolysis. Possible reactions during pyrolysis are hydrosilylation, polymerization of the C?C bonds in the allyl groups and dehydrocoupling among the SiH groups, NH groups and AlH groups in ISP. The pyrolyzed residue at 1700 °C contains crystalline AlN, 2H‐SiC, β‐SiC and β‐Si₃N₄ and amorphous carbon, as revealed by solid‐state nuclear magnetic resonance (NMR) spectroscopy, Raman spectroscopy and X‐ray diffraction (XRD) analysis. Copyright © 2006 John Wiley & Sons, Ltd.     

Dual crosslinked phenylethynyl end‐capped sulfonated polyimides via the ethynyl and sulfonate groups promoted by PEG

Typically, phenylethynyl (PE) end‐capped oligomides require a temperature of 370 °C for 1 h to develop a crosslinked system. A published method using poly(ethylene glycol)s (DM‐PEG‐250 and PEG‐400) as cosolvents with NMP was effective in crosslinking the ethynyl end‐caps at 250 °C/3 h in nonsulfonated oligomides. The application of this novel crosslinked method to PE end‐capped sulfonated oligomides was effective but caused a secondary crosslinked network via the sulfonic acid groups and ethylene glycol solvents. The solid‐state ¹³C NMR spectral data on ¹³C‐labeled end‐caps in the PE‐3F‐SPI‐3 oligomide provide evidence for the ethynyl to ethynyl and ethylene oxide sulfonate ester dual crosslinked structure. Infrared spectroscopy of model compounds also provides evidence for the presence of crosslinked sulfonate ester and appended sulfonate ester side chains. ¹³C NMR also provided quantitative data on the extent of the ethynyl to ethynyl crosslinking reaction and sulfonate ester crosslinks and side chains. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

End functionalization of hyperbranched poly(siloxysilane): Novel crosslinking agents and hyperbranched–linear star block copolymers

Functionalized hyperbranched poly(siloxysilane)s have been prepared by hydrosilylation reactions involving the multiple silicon hydride (SiH) groups of the polymer to introduce other reactive groups such as epoxy, amine, and hydroxyl groups. The possible use of these modified polymers as novel crosslinking agents is discussed. The same hydrosilylation reaction is used to attach preformed linear poly(isobutylene) (PIB) or poly(ethylene oxide) (PEO) onto the hyperbranched polymer to afford unusual hyperbranched–linear star block copolymers. The PIB‐derived copolymer is shown to be very hydrophobic, whereas its PEO‐derived counterpart is amphiphilic. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2970–2978, 2000     

Specific properties of in situ ruthenium‐catalyzed polyamide 12/polydimethylsiloxane compatibilized blend

The main objective of this work focused on the chemical modification of polyamide 12 (PA12) properties through the reaction with a hydride‐terminated polydimethylsiloxane (PDMS‐SiH). The investigated PA12/PDMS‐SiH blend was compatibilized by ruthenium derivative catalyzed hydrosilylation reaction in molten state. This original route enhanced interfacial adhesion and avoid PDMS‐SiH leaching phenomenon between the two immiscible phases. More specifically, the size of PDMS‐SiH domains in the blend decreased from around 4 μm to 800 nm and from 30 to 1 μm after compatibilization with 10 and 20 wt % PDMS‐SiH, respectively. For the best compatibilized PA12/PDMS‐SiH blend, the introduction of PDMS lowered the surface free energy and the PA12‐based blend turned from hydrophilic to hydrophobic behavior, as evidenced by the water contact angle measurements. Gas permeability and CO₂/H₂ and CO₂/He gas selectivity were also improved with the increase in PDMS content. Besides, the mechanical properties were enhanced with 13% increase in Young's modulus after in situ compatibilization with 15 wt % PDMS‐SiH. Thermal stability was also improved after compatibilization as the initial degradation temperature of reactive blends obviously increased compared with nonreactive ones. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 978–988     

Polybenzoxazines from renewable diphenolic acid

The novel benzoxazine monomers, DPA‐Bz and MDP‐Bz from renewable diphenolic acid (DPA), which mimics the structure of bisphenol A (BPA), were synthesized by traditional approaches. The structure and purity of the monomers was confirmed by FTIR, ¹H NMR, and ¹³C NMR spectra. The thermally activated polymerization of the MDP‐Bz and DPA‐Bz afforded thermosetting polybenzoxazines with higher T_g's, 270 °C and 208 °C respectively, and higher crosslinking density compared to BPA‐Bz, due to the transesterification or esterification reactions occurred during curing process. These reactions are in accordance with the number of independent reactions determined analyzing by SVD the chemical rank of the IR spectra data matrices recorded along the homopolymerization reactions monitored at 200 °C. Spectral and concentration profiles of the active chemical species involved in these processes were obtained by MCR‐ALS. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Hydrosilylation in Aryliminopyrrolide‐Substituted Silanes

A range of silanes was synthesized by the reaction of HSiCl₃ with iminopyrrole derivatives in the presence of NEt₃. In certain cases, intramolecular hydrosilylation converts the imine ligand into an amino substituent. This reaction is inhibited by factors such as electron‐donating substitution on Si and steric bulk. The monosubstituted (^DippIMP)SiHMeCl (^DippIMP=2‐[N‐(2,6‐diisopropylphenyl)iminomethyl]pyrrolide), is stable towards hydrosilylation, but slow hydrosilylation is observed for (^DippIMP)SiHCl₂. Reaction of two equivalents of ^DippIMPH with HSiCl₃ results in the hydrosilylation product (^DippAMP)(^DippIMP)SiCl (^DippAMP=2‐[N‐(2,6‐diisopropylphenyl)aminomethylene]pyrrolide), but the trisubsitituted (^DippIMP)₃SiH is stable. Monitoring the hydrosilylation reaction of (^DippIMP)SiHCl₂ reveals a reactive pathway involving ligand redistribution reactions to form the disubstituted (^DippAMP)(^DippIMP)SiCl as an intermediate. The reaction is strongly accelerated in the presence of chloride anions.     

Poly(arylene ether)s with pendant diphenyl phosphoryl groups: Synthesis,characterization, and thermal properties

A series of poly(arylene ether)s, (PAEs), carrying a pendant diphenyl phosphoryl group were prepared via the nucleophilic aromatic substitution (NAS) reactions of 3,5‐difluorotriphenylphosphine oxide, 6 . The difluoro monomer 6 was synthesized via two‐step reaction sequence and subsequently characterized by ¹H, ¹³C, ¹⁹F, and ³¹P NMR spectroscopy, GC/MS, and elemental analysis. The reactivity of the electrophilic sites in 6 , activated by only a diphenylphosphoryl group located in the meta‐position, in 6 was probed via NMR spectroscopy and model reactions and was determined to be sufficient to undergo typical NAS reactions. High molecular weight, amorphous, organic soluble poly(arylene ether)s, bearing a pendant diphenylphosphoryl group, were prepared via the reaction of 6 with a variety of bis‐phenols under typical NAS conditions. The poly(arylene ether)s were characterized for structure via the use of ¹H, ¹³C, and ³¹P NMR spectroscopy while their thermal properties were evaluated using DSC and TGA analysis. The glass transition temperatures (T_g) of the synthesized PAEs ranged from 143 to 175 °C, while their 5% weight loss temperatures ranged from 467 to 510 °C under nitrogen and from 470 to 526 °C in air. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Free radical and thermal curing of terpyridine‐modified terpolymers

Terpolymers bearing terpyridine as well as (meth)acrylates as free radical curable groups (UV‐curing) or hydroxyl groups (thermal curing with bis‐isocyanates) were synthesized and characterized using ¹H NMR, IR and UV‐vis spectroscopy as well as GPC. Subsequently, the ability of covalent crosslinking via the UV‐initiated polymerization of the acrylate groups was investigated. Moreover, the thermal covalent crosslinking via the reaction of hydroxyl functionalized terpolymer and bis‐isocyanate compounds could be successfully achieved. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4028–4035, 2004     

A conjugated alkyne functional bicyclic polybenzoxazine with superior heat resistance

A difunctional benzoxazine (coPh‐apa) with a conjugated alkyne group is synthesized by the oxidative coupling reaction from a monocycle‐benzoxazine (Ph‐apa) containing an alkyne group. A model compound, 1,4‐diphenylbutadiyne (coPa), is used to study the curing reaction process of coPh‐apa by DSC, Fourier transform infrared spectroscopy, and ¹³C NMR, and the results suggest that the conjugated alkyne groups are involved in the crosslinking reaction via the trimerization reaction of the conjugated alkynyl groups and the Diels–Alder reaction. Furthermore, thermal properties of the polybenzoxazine are studied by dynamic thermomechanical analysis and thermogravimetric analysis. A glass‐transition temperature (T_gs) of as high as 412 °C and a char yield of 75.6% at 800 °C under nitrogen are obtained with the aid of the conjugated alkyne groups. Its excellent heat resistance dominates most thermosetting resins and will serve for heat shields. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1587–1592     

Grafting of functional nitroxyl free radicals to polyolefins as a tool to postreactor modification of polyethylene‐based materials with control of macromolecular architecture

Nitroxyl radicals were used as functionalizing agents during the free radical postreactor modification process of polyolefins carried out in the melt. The 4‐hydroxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl (HO‐TEMPO) and the 4‐benzoyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl (BzO‐TEMPO) free radicals were successfully grafted onto a polyethylene‐based material (ethylene‐co‐1‐octene copolymer) by coupling reaction with polymer macroradicals; these last were formed by H‐abstraction through peroxide addition. The macromolecular structure of the functionalized polyolefins was assessed by ¹H‐NMR, FTIR spectroscopy, and SEC measurements which were used to evidence the grafting site, to evaluate the grafting level and to highlight the occurrence of chain extension through crosslinking side reactions. Indeed the use of proper model compounds allowed the preparation of accurate FTIR calibration curves for the quantitative determination of the functionalization degree. Besides the high temperature SEC analysis highlighted that this fast and simple coupling reaction between macroradicals and nitroxyl free radicals grants the grafting of functionalities onto the polyolefin backbone by contemporarily preventing the side reactions liable of the structure and MW modification of the pristine polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of carbohydrate‐segmented polydimethylsiloxanes by hydrosilylation

Carbohydrate‐modified polysiloxanes have been presented several times within the last decade. In this work, a new route to carbohydrate‐segmented polysiloxanes is presented. A series of allyl‐group‐containing bifunctional carbohydrate derivatives was synthesized and reacted with hydrodimethylsilyl‐terminated polysiloxane in hydrosilylation reactions with Speier's catalyst. The carbohydrate monomers and the resulting materials were fully characterized with ¹H and ¹³C NMR spectroscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3814–3822, 2005     

Novel thermotropic liquid crystalline‐cum‐photocrosslinkable polyvanillylidene alkyl/arylphosphate esters

A new class of linear unsaturated polyphosphate esters based on divanillylidene cyclohexanone possessing liquid crystalline‐cum‐photocrosslinkable properties have been synthesized from 2,6‐bis[n‐hydroxyalkyloxy(vanillylidene)]cyclohexanone [n = 6,8,10] with various alkyl/aryl phosphorodichloridates in chloroform at ambient temperature. The resultant polymers were characterized by intrinsic viscosity, FT‐IR, ¹H, ¹³C, and ³¹P‐NMR spectroscopy. All the polymers showed anisotropic behavior under hot stage optical polarized microscope (HOPM). The liquid crystalline textures of the polymers became more transparent with increasing spacer length. The thermal behavior of the polymers was studied by thermogravimetric analysis and differential scanning calorimetry. The T_g, T_m, and T_i of the polymers decreased with increasing flexible methylene chain. The photocrosslinking property of the polymer was investigated by UV light/UV spectroscopy; the crosslinking proceeds via 2π‐2π cycloaddition reactions of the divanillylidene exocyclic double bond of the polymer backbone. The pendant alkyloxy containing polymers show faster crosslinking than the pendant phenyloxy containing polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5215–5226, 2004     

Comprehensive 2D NMR analysis: Acrylonitrile/ethyl methacrylate copolymers synthesized by ATRP at ambient temperature

Copolymerization of acrylonitrile and ethyl methacrylate using atom transfer radical polymerization (ATRP) at ambient temperature was carried out under optimized reaction conditions using 2‐bromopropionitrile as initiator and CuBr/2,2′‐bipyridine as the catalyst system. The copolymer composition, obtained from ¹H NMR spectra, were used to determine the monomer reactivity ratios (r_A = 0.68 and r_E = 1.75) involved in ATRP. Two‐dimensional NMR (heteronuclear single quantum correlation and total correlated spectroscopy) experiments were employed to resolve the highly overlapping and complex ¹H and ¹³C{¹H} NMR spectra of copolymers. The complete spectral assignments of the quaternary carbons viz. carbonyl and nitrile carbons were done with the help of heteronuclear multiple bond correlation spectra. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2955–2971, 2006     

Dioxomolybdenum(VI) and dioxotungsten(VI) complexes: efficient catalytic activity for crosslinking reaction in ethylene‐vinyl acetate copolymer/alkoxysilane composites

The catalytic performances of several bis(acetylacetonato)metal complexes [Cu(acac)₂, Zn(acac)₂, TiO(acac)₂, VO(acac)₂, MoO₂(acac)₂, and WO₂(acac)₂] were investigated for the crosslinking reaction via transesterifications in the ethylene‐vinyl acetate copolymer/tetraethoxysilane (EVA/TEOS) composite system by means of dynamic attenuated total reflectance Fourier transform infrared, solvent swelling, and solid‐state ²⁹Si cross polarization/magic angle spinning nuclear magnetic resonance techniques. Results of the kinetic examination revealed that MoO₂(acac)₂ and WO₂(acac)₂ exhibited a higher catalytic activity than di‐n‐butyltin(IV) oxide, which is a catalyst most commonly used for the transesterification process in polymer system, but has a toxic effect on the environmental health. And furthermore, the crosslink density and final siloxane network structure of crosslinked EVA/TEOS composites are found to be greatly correlated with the catalyst used. On the basis of the S_N2‐Si pathway, a plausible catalytic mechanism of MoO₂(acac)₂ and WO₂(acac)₂ was proposed for the crosslinking reaction via transesterifications of the vinyl acetate moieties in EVA backbone with the ethoxysilane groups in one TEOS molecule. The findings in this study may fill the blank in the high performance and environmentally friendly catalyst in the field of the crosslinking reactions in polymer system and provide useful clue for other transesterifications. Copyright © 2015 John Wiley & Sons, Ltd.     

Solid polymer electrolytes I,preparation, characterization,and ionic conductivity of gelled polymer electrolytes based on novel crosslinked siloxane/poly(ethylene glycol) polymers

A series of crosslinked siloxane/poly(ethylene glycol) (Si–PEG) copolymers were synthesized from the reactive methoxy‐functional silicone resin (Si resin) and PEGs with different molecular weights via two kinds of crosslinking reactions during an in situ curing stage. One of the crosslinking reactions is the self‐condensation between two methoxy groups in the Si resin, and another one is an alkoxy‐exchange reaction between the methoxy group in the Si resin and the OH group in PEG. The synthesized crosslinked copolymers were characterized by Fourier transform infrared spectroscopy, DSC, and ¹³C NMR. The crosslinked copolymers were stable in a moisture‐free environment, but the Si? O? C linkages were hydrolyzed in humid conditions. The gel‐like solid polymer electrolytes (SPEs) were prepared by impregnating these crosslinked Si–PEG copolymers in a propylene carbonate (LiClO₄/PC) solution. The highest conductivity reached 2.4 × 10^?4 S cm^?1 at 25 °C and increased to 8.7 × 10^?4 S cm^?1 at 85 °C. The conductivities of these gel‐type SPEs were affected by the content of LiClO₄/PC, the molecular weights of PEGs, and the weight fraction of the Si resin. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2051–2059, 2004