Synthesis and characterization of stable polymer-coated C8 stationary phase with high durability under extreme pH conditions for high-performance liquid chromatography

A highly chemically stable polymer-coated silica-based C8 stationary phase was developed by combining modification with octyl groups and a polymer coating technology. The stationary phase was prepared by the following procedure: (1) introduction of octyl groups to the silica surface; (2) coating the C8 silica with a silicone polymer. 29Si solid-state NMR spectra indicated that a silicone polymer reacted not only with residual silanol groups on the silica surface, but with those generated from silanes used for the introduction of octyl groups. Column durability was evaluated with an acidic mobile phase (60 degrees C, pH 1) and a basic mobile phase (50 degrees C, pH 10) in accelerated damaging conditions. The C8 phase showed a high durability under both conditions.     

Application of solid-state NMR (13C and 29Si CP/MAS NMR) spectroscopy to the characterization of alkenyltrialkoxysilane and trialkoxysilyl-terminated polyisoprene grafting onto silica microparticles

The solid-state Nuclear Magnetic Resonance (NMR) was used to characterize surfaces of silica gels chemically modified by alkenyltrialkoxysilanes and trialkoxysilyl terminated 1,4-polyisoprenes. The formation of covalent bonds created between alkoxy functional groups from alkenyltrialkoxysilane or trialkoxysilyl-terminated 1,4-polyisoprene and silanol groups on silica was clearly demonstrated by means of ¹³C and ²⁹Si CP/MAS NMR spectroscopy. Quantitative data, including calculation of the grafting yields in relation with the initial silanol concentrations, were also obtained by using solid-state ²⁹Si-NMR leading to a final well-defined characterization of the silica surfaces. A relatively good agreement was noticed between the grafting yields calculated from ²⁹Si-NMR spectra and those determined from other analytical techniques such as Wijs titration or elementary analysis. The reactivity of the various silica silanols towards each coupling agent was clearly characterized and estimated, as were the proportions of the various grafted structures formed at the silica surface. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36 : 437–453, 1998     

Comparison of D,L-Mandelic Acid Resolution on Zeolite and Silica Supported Pirkle-Type Chiral Stationary Phases

 Zeolite A, a material of crystalline character, and Hypersil silica have been used as support for the preparation of chiral stationary phases. On the amorphous silica support surface the silanol groups are randomly dispersed. The crystalline zeolite secondary building units consisting primarily of SiO₄, AlO₄ ⁻ tetrahedra determine the regularity of surface silanol groups. Owing to the crystal lattice structure, the location of silanols is well determined and hence the dispersion of chiral selector molecules chemically bonded onto the zeolite surface silanol groups is fundamentally arranged. Amides of DNB-L-Leu, DNB-L-Phe, B-L-Leu chiral selector molecules were anchored onto the zeolite silanols and B-L-Leu onto the silica support silanols. Lipophilic buffer in RP conditions has dynamically modified the residual silanols of each support. The enantioseparation of ion paired D,L-mandelic acid from aqueous solution on the zeolite and silica supported chiral stationary phases prove a superior enantioseparation on the zeolite supported phases. Revision February 18, 2000.     

Solid-State NMR Study of Phase Separation and Order of Water Molecules and Silanol Groups in Polysiloxane Networks

Homogeneity and structure of organically modified polysiloxane networks prepared by sol-gel co-condensation, as well as location and nature of water molecules and silanol groups were studied by 1D and 2D solid-state NMR. ¹H–²⁹Si and ¹H–¹H interatomic distances were estimated from variable contact-time CP/MAS experiments, ¹H NMR chemical shifts and off-resonance WISE NMR. A structure model of these networks is proposed and discussed. The fraction of proton-inaccessible units Q⁴ in the networks decreases with increasing amounts of dimethylsiloxane (D) and methylsiloxane (T) units. In contrast to systems prepared by co-condensation of tetraethoxysilane (TEOS) with dimethyl(diethoxy)silane (DMDEOS), proton-inaccessible units form essential fraction in networks prepared by co-condensation of TEOS with methyl(triethoxy)silane (MTEOS). The proton-accessible part of the networks with high O/Si ratios is nano-heterogeneous phase, which is composed of water containing Q ⁱ particles separated by copolymer domains. The overall homogeneity and uniformity of binding sites around silanol groups increases by co-condensation TEOS with DMDEOS or MTEOS, while the amount of physisorbed water as well as the hydrogen bond strength decreases, as compared with neat silica gel prepared by polycondensation of TEOS.     

Chemistry of mixtures of bis-[trimethoxysilylpropyl]amine and vinyltriacetoxysilane: an NMR analysis

¹³C, ²⁹Si, and ¹H NMR were used to investigate the interaction of bis-[trimethoxysilylpropyl]amine (silane A) with vinyltriacetoxysilane (silane V). The reaction was found to generate a hydroxylamine, an amide and a silanol. A series of hydrolysis and condensation reactions were found to occur concurrently with the formation of the major reaction products. Upon dilution with acidified water, the amide decomposes, initiating hydrolysis of unreacted silanes. Hydrogen bonding between the N–H and SiOH groups is likely to be responsible for the stability of the dilute solutions.     

Surface Modification of Colloidal Silica by Sulfonation Route for Super-Hydrophilicity

Colloidal silica was chemically modified by a two-step method including an olefin sulfonation route as a preliminary study for super-hydrophilic applications. The hydrophobic vinyl groups were initially bonded chemically to the hydroxylated silica surface using the trichlorosilane coupling agents. The vinyl-terminated silica was then sulfonated by addition reaction with chlorosulfonic acid. The modified silica was investigated using DRIFT, TGA, element analysis, solid-state ²⁹Si- and ¹³C CP-MAS NMR. The vinyl-terminated specimen showed a characteristic IR absorption band at 1600 cm^–1 and a weight loss of approximately 3% starting at 350°C while the ²⁹Si NMR peaks at 70.9 and 79.8 ppm and ¹³C NMR at 136 ppm and 129.8 ppm were assigned to a vinyl group bonded to silica. Elemental analysis of the sulfonated silica indicated the presence of sulfur, carbon and hydrogen. Thermal decomposition in range 150–600°C was due to the presence of sulfonated organics and unreacted vinyl groups while the new signals on ¹³C NMR, which were in the range 70–15 ppm, were assigned to sulfonated carbons.     

Interfacial phenomena in starch/fumed silica at varied hydration levels

Hydrated powders of non-gelatinised starch and hydrogels of gelatinised starch alone or with addition of modified nanosilica (with grafted aminopropylmethylsilyl groups substituting one-third of surface silanols) were studied using broadband dielectric relaxation spectroscopy (DRS), thermally stimulated depolarisation current (TSDC) method and ¹H NMR spectroscopy with layer-by-layer freezing-out of bulk and interfacial waters. The ¹H NMR and TSDC techniques with the use of Gibbs–Thomson relation for the freezing point depression allow us to calculate: (i) the thermodynamic parameters of interfacial water weakly and strongly bound to polymer molecules and nanoparticles; (ii) size distributions of pores filled by structured water; (iii) surface area and volume of micro-, meso- and macropores. The DRS and TSDC results for hydrogels and hydrated powders with starch/modified fumed silica show that the β- and γ-relaxations of starch are strongly affected by water and functionalised silica nanoparticles which slow down both low- and high-frequency and low- and high-temperature relaxations.     

Preparation of reversed-phase high-performance thin-layer plates by in situ reaction with monochlorosilanes

The condition for in situ chemical modification of commercially available thin-layer plates have been varied and the influence thereof upon reversed phase plate properties has been studied. The reaction variables studied were: average silica pore size, silica water content, use of tri- or monochlorosilanes as modifiers, reaction temperature, and addition of base. Coverage and activity of residual silanol groups was studied on modified plates. Desired plate properties are high speed of development in aqueous solvents and low content of active residual silanol groups. Under the conditions tested, the lowest amount of residual silanols was achieved at the expence of the speed of development in aqueous media and vice versa.     

Anion recognition by 1,3-disiloxane-1,1,3,3-tetraols in organic solvents

Anion recognition by 1,3-disiloxane-1,1,3,3-tetraols has been elucidated by ¹H NMR titrations and ESI-MS in organic solvents. The association constants of the receptors for halide anions are larger than those of silanediol and 1,3-disiloxane-1,3-diol due to the cooperative hydrogen bonds by four silanol hydroxy groups of 1,3-disiloxane-1,1,3,3-tetraols.     

The Structure of Hybrid Gels by Drift and NMR Spectroscopies

Hybrid inorganic-organic gels have been prepared by the sol-gel process using tetraethoxysilane (TEOS) as precursor, mixed with a low concentration of polytetrahydrofuran (PTHF), under acid catalysis. The hybrid xerogels were characterized by DRIFTS and Solid State ¹H, ¹³C and ²⁹Si NMR. The DRIFT spectra indicate that the polymer is responsible for decreasing the number of free silanol groups in comparison to pure silica. Solid-state NMR spectra reveal the types of silicate structures formed and the conditions for establishing chemical bonds between the two phases, which are responsible for the silica network flexibility. We have concluded that it is possible to design a hybrid gel with tailored properties, even at very low polymer concentration, by selecting the appropriate preparation route.     

Modification of Silica by Liquid Polybutadienes Containing Alkoxysilane Groups

Summary : The present work describes a method to modify the surface of silica, reducing its polar character and making it compatible and dispersible into hydrocarbon based elastomers. A liquid low molar mass polybutadiene (PB) was grafted with mercaptopropyltrimethoxysilane (MPTS) via radical addition of the thiol group to the double bonds. The silanized PB was reacted with silica via thermal condensation with its silanol groups. ²⁹Si NMR spectra showed that the condensation reaction of the trifunctional silane involved one or two alkoxy groups, while the third alkoxy group remained unreacted, probably for steric reasons. The characterization of the functionalized silica particles was performed by contact angle measurements and TGA analysis.     

Synthesis of new silica gel adsorbent anchored with macrocyclic receptors for specific recognition of cesium cation

In this article, a new class of silica gel adsorbent functionalized with macrocyclic receptors was developed for cesium recognition. A calixcrown molecule, with strong affinity to cesium cation, was decorated precisely at the 1,3-alternate benzene rings with reactive amino substituents, followed by the anchoring to the silica matrix to obtain a high functionalization degree. Structural characterization of the monomers and the organosilicas was carried out by ¹H/¹³C NMR, ²⁹Si/¹³C solid-state NMR, and FT-IR spectra. Besides, XPS survey, BET, TGA and ESEM were employed to investigate the surface property, thermal stability and micro-morphology of the organosilicas. Due to the host–guest interaction between the calixcrown receptor and cesium cation, efficient separation of cesium in the presence of competing alkali metals including sodium and potassium was realized. Mechanism regarding the recognition effect was discussed. The calixcrown-grafted organosilica material possesses the potential to be applied for the separation of cesium in radioactive liquid waste.     

γ radiolyzed amorphous silica: A study with 29Si CP-MAS NMR spectroscopy

Precipitated amorphous silica has been γ radiolyzed at 333, 666 and 1000 kGy in air. The structural changes undergone during irradiation have been studied by ²⁹Si CP-MAS NMR spectroscopy. The spectra suggest that silica looses the hydrogen atoms attached to the silanol groups and the resulting silanol radicals undergo a crosslinking reaction by forming peroxysiloxane groups or by reacting with E′ centres yielding siloxane groups.     

Sulfonated silica‐based electrolyte nanocomposite membranes

New functionalized particles were prepared by attaching sulfonated aromatic bishydroxy compounds onto fumed silica surface. First, a bromophenyl group was introduced onto the silica surface by reaction of bromophenyltrimethoxysilane with fumed silica. Then, sulfonated bishydroxy aromatic compounds were chemically attached to the silica surface by nucleophilic substitution reactions. The structure of the modified silica was characterized by elemental analysis: ¹³C‐NMR, ²⁹Si‐NMR, and FTIR. Afterward, novel inorganic–organic electrolyte composite membranes based on sulfonated poly(ether ether ketone) have been developed using the sulfonated aromatic bishydroxy compounds chemically attached onto the fumed silica surface. The composite membrane prepared using silica with sulfonated hydroxytelechelic, containing 1,3,4‐oxadiazole units, has higher proton conductivity values in all range of temperatures (40–140 °C) than the membrane containing only the plain electrolyte polymer, while the methanol permeability determined by pervaporation experiment was unchanged. A proton conductivity up to 59 mS cm^?1 at 140 °C was obtained. The combination of these effects may lead to significant improvement in fuel cells (fed with hydrogen or methanol) at temperatures above 100 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2278–2298, 2006     

First Synthesis of 1,3-Alternate 25,27-Dialkyloxy-5,17-diarylcalix[4]arenes-crown-6 as New Cesium Selective Extractants by Suzuki Cross-coupling Reaction

The synthesis of new 25,27-dialkyloxy-5,17-diarylcalix[4]arenes-crown-6 1a–f in 1,3-alternate conformation by Suzuki cross-coupling reaction is reported. Their conformation was determined using ¹H, ¹³C, 2D NMR and ROESY analysis, and X-ray crystallography. Extraction experiments using a two-phase solvent method involving sodium, potassium or cesium picrate showed good extraction of the cesium cation. The X-ray crystal structures of 1,3-alternate 25,27-dipropoxy-5,17-diphenylcalix[4]arene-crown-6 ether 1a and its cesium picrate complex were established. Solid-state data were used to determine the complexation behavior of these new ligands. The efficiency of calixarenes 1a–f for cesium ion extraction could be ascribed to the rigidity and flatness linkages caused by the aryl groups at the lower rim of the aromatic moieties in the calixarene skeleton. In addition, the introduction of these aromatic moieties in positions 5 and 17 enhanced the solubility of the metal complexes in organic media.     

FTIR Studies of the Adsorption of Acetic Acid on Silicas

A range of cesium doped silica samples (0.15 – 0.90 mmol g^–1) have been characterized using a combination of deuterium exchange and adsorption of acetic acid. FTIR results show a strong correlation between the carboxylate formation on acetic acid adsorption and catalyst activity. Cesium loadings of > 0.3 mmol g^–1 do not give any increased acetic acid adsorption, suggesting a saturation of the silica exchange capacity. Deuterium exchange studies demonstrate that 35% of the surface silanol groups on the fresh silica are rapidly exchanged with deuterated water at room temperature.     

Preparation of Silica/Poly(tert‐butylmethacrylate) Core/Shell Nanocomposite Latex Particles

Nanocomposite latex particles, with a silica nanoparticle as core and crosslinked poly(tert‐butylmethacrylate) as shell, were prepared in this work. Silica nanoparticles were first synthesized by a sol‐gel process, and then modified by 3‐(trimethoxysilyl)propyl methacrylate (MPS) to graft C?C groups on their surfaces. The MPS‐modified silica nanoparticles were characterized by elemental analysis, FTIR, and ²⁹Si NMR and ¹³C‐NMR spectroscopy; the results showed that the C?C groups were successfully grafted on the surface of the silica nanoparticles and the grafted substance was mostly the oligomer formed by the hydrolysis and condensation reaction of MPS. Silica/poly(tert‐butylmethacrylate) core/shell nanocomposite latex particles were prepared via seed emulsion polymerization using the MPS‐modified silica nanoparticle as seed, tert‐butylmethacrylate as monomer and ethyleneglycol dimethacrylate as crosslinker. Their core/shell nanocomposite structure and chemical composition were characterized by means of TEM and FTIR, respectively, and the results indicated that silica/poly(tert‐butylmethacrylate) core/shell nanocomposite latex particles were obtained.     

Generation of chemisorbed benzyl radicals on silica nanoparticles

Functionalized silica nanoparticles (NP) were obtained by esterification of the silanol groups of fumed silica nanoparticles with benzyl alcohol. These particles were characterized by Fourier transform infrared spectroscopy, ¹³C and ²⁹Si NMR spectroscopy, thermogravimetry, total organic carbon, Brunauer–Emmett–Teller analysis, UV-visible spectroscopy, and transmission electron microscopy. NP suspensions in water/acetonitrile mixtures were used as quenchers of benzophenone (BP) phosphorescence in time-resolved experiments at the excitation wavelength of 266 nm. The phosphorescence signals obtained in the presence of the nanoparticles were fitted to biexponential decays. Both decays were accelerated in the presence of increasing amounts of NP. A model, including the reversible adsorption of BP on the NP, which was supported by computer simulations accounts for the observed results. Laser flash-photolysis experiments with excitation at 266 nm of NP suspensions in water/acetonitrile in the presence of BP generated benzyl radicals that were attached to the silica surface. These radicals were detected at their absorption maxima (320 nm) by transient optical techniques.     

Proton diffusion in hybrid materials of CsHSO4 and silica nanoparticles as studied by H solid-state NMR

Hybrid materials of CsHSO₄ and silica nanoparticles were prepared by mechanical milling, and hydrogen bond states and proton dynamics were studied by means of ¹H solid-state NMR. ¹H MAS NMR spectra demonstrated that three types of domains are present in the milled materials. Domain A has hydrogen bond states similar to those in the bulk compound. With respect to hydrogen bonds, domains A-II and A-III are similar to phases II and III of CsHSO₄, respectively. Protons in domain A-II undergo translational diffusion, and the diffusion is faster than in phase II of bulk CsHSO₄. Domain B is originated by mixing of CsHSO₄ with silica nanoparticles, presumably locating at the boundary region. Protons in this domain also undergo translational diffusion. The motional rate is faster than in phase II of bulk CsHSO₄ but is slower than in domain A-II. In domain C protons are contained as OH groups on the surface of silica nanoparticles. Protons are immobile in this domain.     

Synthesis of phenylalkyl bonded stationary phases and their application in the HPLC of aromatic hydrocarbons

Summary Phenylalkyl modified silica gels have been prepared by reaction of phenylalkyl chlorosilanes with silica gel. The structures of silanes as well as of the chemically modified silica gel have been confirmed by elemental analysis, IR and NMR spectroscopy. The behaviour of these stationary phases has been investigated in HPLC for the separation of aromatic hydrocarbons. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984