Theoretical investigations of 1,4‐butanediol and 2‐butene‐1,4‐diol cyclodehydration using postprocessing visualization of quantum chemical calculation data

Cyclodehydration of 1,4‐butanediol and 2‐butene‐1,4‐diol to the corresponding cyclic ethers was studied using the AM1 semiempirical method. It was established that the cyclodehydration reaction of 1,4‐butenediol and 2‐butene‐1,4‐diol is effected by converting of semicyclic conformers in the presence of acidic and basic active centers. The calculation results indicate that a concerted mechanism is probably realized in the cyclodehydration of both diols, while the sequences of the predicted steps in the cyclodehydration reaction for 1,4‐butanediol and 2‐butene‐1,4‐diol are different. The calculated reaction heats for 1,4‐butanediol and 2‐butene‐1,4‐diol transformations are ?184.029 and ?308.746 kcal/mol, respectively. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Oxidative transformation of the natural lignan hydroxymatairesinol with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone

The oxidative transformation of the two isomers of the natural lignan hydroxymatairesinol from Norway Spruce (Picea abies) by 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ), has been studied. Significant differences in the outcome of the reactions were observed when the pure isomers of hydroxymatairesinol were reacted with DDQ under the same conditions. The different stereoelectronic effects in the two isomers as well as their conformational structures seem to determine the site of reaction, which results in different reaction products. Several products were identified by GC-MS and NMR spectroscopy. Oxomatairesinol was obtained in a yield of 25%.     

Poly(2,5‐dihydroxy‐1,4‐phenylene benzobisthiazole)/poly(1,4‐phenylene benzobisthiazole) copolymers: Chain packing and properties

Crystal‐packing, optical, and electrical properties of poly(2,5‐dihydroxy‐1,4‐phenylene benzobisthiazole) (DiOH‐PBZT) and copolymers of DiOH‐PBZT/poly(1,4‐phenylene‐benzobisthiazole) (PBZT) were examined. Intramolecular hydrogen bonds between the hydroxyl units and the neighboring nitrogen atoms, as evidenced by the IR spectra, led to the formation of a pseudoladder chain structure and changed the chain packing. The (200) and (010) planes were both affected by the copolymer composition, with the (200) plane spacing increasing from 5.895 to 6.482 Å and the (010) plane spacing decreasing from 3.539 to 3.404 Å with the transition from the unsubstituted PBZT homopolymer to the DiOH‐PBZT homopolymer. The cell dimensions of the copolymers were simple averages of those of the individual homopolymers, suggesting the isomorphic crystal structure formation of the two units. The c‐axis spacing, however, remained unchanged. The increase in the conjugation length of the copolymers as the dihydroxy content increased was confirmed by the bathochromic shift of the absorption band in the ultraviolet–visible spectra. The intrinsic conductivities of the copolymers were 3 orders of magnitude higher than that of the unsubstituted PBZT. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 559–565, 2001     

1,4‐Addition polymerization of 1,4‐bis(4‐benzylpyridinium)butadiyne triflate in a dipolar aprotic solvent

1,4‐Bis(4‐benzylpyridinium)butadiyne triflate was aggregated in dimethylformamide and spontaneously converted into the 1,4‐addition type of polydiacetylene. The polymerization took place in a dipolar aprotic solvent with a large dielectric constant that could enhance the aggregation of the ionic diacetylene salt through the electrostatic interaction. The molecular weight of the diacetylene was leveled off after 30 h at 80 °C to reach 1.5 × 10⁴ (number‐average molecular weight) that consisted of the 1,4‐addition type of polydiacetylene similar to polydiacetylenes obtained in the conventional solid‐state polymerization. Electron spin resonance spectra revealed that diradicals were generated at the earlier state aggregation to give rise to a solution polymerization. The UV spectra also suggested the presence of the activated aggregation associated with the polymerization as well as the eximer emission spectra. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3534–3541, 2002     

Theoretical study of enantiomeric and geometric control in chiral guanidine‐catalyzed asymmetric 1,4‐addition of 5H‐oxazol‐4‐ones

Density functional theory calculations are used to study the reaction mechanism and origins of high stereoselectivity in chiral guanidine‐catalyzed asymmetric 1,4‐addition of 5H‐oxazol‐4‐ones. The reaction involves proton abstraction of 5H‐oxazol‐4‐one, C—C bond formation, and proton transfer. N1 atom of chiral guanidine exchanges its character as base and acid to activate 5H‐oxazol‐4‐one and to facilitate the product formation. The role of N2—H2 is not only H‐bond donor for 5H‐oxazol‐4‐one but also electron accepter for N1. The enantioselectivity related with rate‐limiting step 1 and Z/E selectivity determined in step 2 are primarily influenced by a five to six‐membered ring link in the backbone of chiral guanidine. The reaction proceeds along the favorable path with smaller rotations of the linked bonds. The enantioselectivity is improved with guanidine involving an electron‐deficient and bulky substituent. With methyl ether‐protected hydroxy in structure, the catalytic ability and enantioselective control of guanidine are extraordinarily low, affording the opposite enantiomer as major product. Z‐isomers are preferred in all cases. © 2013 Wiley Periodicals, Inc.     

ZnII‐ and AuI‐Catalyzed Regioselective Hydrative Oxidations of 3‐En‐1‐ynes with Selectfluor: Realization of 1,4‐Dioxo and 1,4‐Oxohydroxy Functionalizations

Catalytic 1,4‐dioxo functionalizations of 3‐en‐1‐ynes to (Z)‐ and (E)‐2‐en‐1,4‐dicarbonyl compounds are described. This regioselective difunctionalization was achieved in one‐pot operation through initial alkyne hydration followed by in situ Selectfluor oxidation. The presence of pyridine alters the reaction chemoselectivity to give 4‐hydroxy‐2‐en‐1‐carbonyl products instead. A cooperative action of pyridine and Zn^II assists the hydrolysis of key oxonium intermediate.     

Multiple Pentafluorophenylation of 2,2,3,3,5,6,6‐Heptafluoro‐3,6‐dihydro‐2H‐1,4‐oxazine with an Organosilicon Reagent: NMR and DFT Structural Analysis of Oligo(perfluoroaryl) Compounds

The reagent Me₃Si(C₆F₅) was used for the preparation of a series of perfluorinated, pentafluorophenyl‐substituted 3,6‐dihydro‐2H‐1,4‐oxazines ( 2 – 8 ), which, otherwise, would be very difficult to synthesize. Multiple pentafluorophenylation occurred not only on the heterocyclic ring of the starting compound 1 (Scheme), but also in para position of the introduced C₆F₅ substituent(s) leading to compounds with one to three nonafluorobiphenyl (C₁₂F₉) substituents. While the tris(pentafluorophenyl)‐substituted compound 3 could be isolated as the sole product by stoichiometric control of the reagent, the higher‐substituted compounds 5 – 8 could only be obtained as mixtures. The structures of the oligo(perfluoroaryl) compounds were confirmed by ¹⁹F‐ and ¹³C‐NMR, MS, and/or X‐ray crystallography. DFT simulations of the ¹⁹F‐ and ¹³C‐NMR chemical shifts were performed at the B3LYP‐GIAO/6‐31++G(d,p) level for geometries optimized by the B3LYP/6‐31G(d) level, a technique that proved to be very useful to accomplish full NMR assignment of these complex products.     

Copper(I) π‐Complexes with 2‐Butyne‐1,4‐diol. Synthesis and Crystal Structure of Na[CuCl2(HOCH2C≡CCH2OH)]·2H2O

Crystals of anionic Na[CuCl₂(HOCH₂C≡CCH₂OH)]·2H₂O π‐complex have been synthesized by interaction of 2‐butyne‐1,4‐diol with CuCl in a concentrated aqueous NaCl solution and characterized by X‐ray diffraction at 100 K. The crystals are triclinic: space group , a = 7.142(3), b = 7.703(3), c = 10.425(4) Å, α = 105.60(3), β = 99.49(3), γ = 110.43(3)°, V = 495.9(4) ų, Z = 2, R = 0.0203 for 3496 reflections. The structure is built of discrete [CuCl₂(HOCH₂C≡CCH₂OH)]^? anionic stacks and polymeric cations among the stacks. The Cu^I atom adopts trigonal planar coordination of two Cl^? anions and the C≡C bond of 2‐butyne‐1,4‐diol, Cu–(C≡C) distance is equal to 1.903(3) Å. Na⁺ cations environment is octahedral and consists of O and Cl atoms. The crystal packing is governed by strong hydrogen bonds of O–H···Cl and O–H···O types.     

Rhodium/Chiral Diene‐Catalyzed Asymmetric 1,4‐Addition of Arylboronic Acids to Chromones: A Highly Enantioselective Pathway for Accessing Chiral Flavanones

Chromone has been noted to be one of the most challenging substrates in the asymmetric 1,4‐addition of α,β‐unsaturated carbonyl compounds. By employing the rhodium complex associated with a chiral diene ligand, (R,R)‐Ph‐bod*, the 1,4‐addition of a variety of arylboronic acids was realized to give high yields of the corresponding flavanones with excellent enantioselectivities (≥97 % ee, 99 % ee for most substrates). Ring‐opening side products, which would lead to erosion of product enantioselectivity, were not observed under the stated reaction conditions.     

Hydrogen bonding interaction between 1,4‐dioxane and water

This work reports an interaction of 1,4‐dioxane with one, two, and three water molecules using the density functional theory method at B3LYP/6‐311++G* level. Different conformers were studied and the most stable conformer of 1,4‐dioxane‐(water)_n (n = 1–3) complex has total energies ?384.1964038, ?460.6570694, and ?537.1032381 hartrees with one, two, and three water molecules, respectively. Corresponding binding energy (BE) for these three most stable structures is 6.23, 16.73, and 18.11 kcal/mol. The hydrogen bonding results in red shift in O? O stretching and C? C stretching modes of 1,4‐dioxane for the most stable conformer of 1,4‐dioxane with one, two, and three water molecules whereas there was a blue shift in C? O symmetric stretching and C? O asymmetric stretching modes of 1,4‐dioxane. The hydrogen bonding results in large red shift in bending mode of water and large blue shift in symmetric stretching and asymmetric stretching mode of water. © 2009 Wiley Periodicals, Inc. Int J Quantum Chem, 2010     

Substituent effects on the stability of 1,4‐benzodiazepin‐2‐one tautomers: A density functional study

The relative stability of 1,4‐benzodiazepin‐2‐one tautomers in the gas phase and model solvents was calculated at the M06 and ωB97XD levels of theory. The two density functionals were benchmarked earlier and demonstrated as excellent models to study tautomerism in a vast array of chemical systems. A number of commercially available 1,4‐benzodiazepin‐2‐ones were investigated computationally for the first time. In addition, some biologically active and newly devised benzodiazepines were considered, which may be important in designing structures with desired (bio)chemical features. Special attention was paid to determine substituent effects on the Gibbs free energies of keto, enol, and iminol forms for each respective benzodiazepine. It was demonstrated that (i) the replacement of the benzene ring by the heterocyclic ring in the benzodiazepine system may stabilize the iminol tautomer, and (ii) the electron‐withdrawing substituent at the C3‐position of the respective benzodiazepine may stabilize the enol tautomer relative to the parent keto form. It is concluded that substituent effects may govern the chemical reactivity and biological properties of selected benzodiazepines.     

Reaction of 2,3‐Dichloro‐1,4‐Naphthoquinone with 1‐Phenylbiguanide and 2‐Guanidinebenzimidazole

When 2,3‐dichloro‐1,4‐naphthoquinone (DCHNQ) ( 1 ) is allowed to react with 1‐phenylbiguanide (PBG) ( 2 ), 4‐chloro‐2,5‐dihydro‐2,5‐dioxonaphtho[1,2‐d]imidazole‐3‐carboxylic acid phenyl amide ( 4 ), 6‐chloro‐8‐phenylamino‐9H‐7,9,11‐triaza‐cyclohepta[a]naphthalene‐5,10‐dione ( 5 ) and 4‐dimethyl‐amino‐5,10‐dioxo‐2‐phenylimino‐5,10‐dihydro‐2H‐benzo[g]quinazoline‐1‐carboxylic acid amide ( 6 ) were obtained. While on reacting 1 with 2‐guanidinebenzimidazole (GBI) ( 3 ) the products are 3‐(1H‐benzoimidazol‐2‐yl)‐4‐chloro‐3H‐naphtho[1,2‐d]imidazole‐2,5‐dione ( 7 ) and 3‐[3‐(1H‐benzoimidazol‐2‐yl)‐ureido]‐1,4‐dioxo‐1,4‐dihydronaphthalene‐2‐carboxylic acid dimethylamide ( 8 ).     

Conductivity of I2‐Doped High trans‐1,4‐Polybutadiene

High trans‐l,4‐polybutadiene ( ?96% (trans)) was prepared by lanthanum naphthenate catalytic system. The conductivity of obtained polybutadiene doped with iodine reaches about ?100 s/cm, which is 2 orders of magnitude higher than the value reported.^4,5 During the I₂‐doping, the conjugated sequence was formed through double bond shifting reaction. According to the relationship between conductivity and temperature, conducting mechanism of doped high trans‐l,4‐polybutadiene is fit on variable range hoping (VRH) model.     

Structural Diversity in the Self‐assembly of Cd(II) Complexes Containing 2,6‐Dimethyl‐3,5‐dicyano‐4‐(4‐pyridyl)‐1,4‐dihydropyridine

The syntheses, structures and properties of the complexes [CdBr₂( L )₂·4H₂O]_n [ L = 2,6‐dimethyl‐3,5‐dicyano‐4‐(4‐pyridyl)‐1,4‐dihydropyridine], 1 and [Cd(SCN)₂( L )₂(H₂O)]_n, 2 , are reported. In polymeric complexes 1 — 2 , the L ligands bridge the metal centers through the pyrimidyl and cyano nitrogen atoms forming 1‐D double‐stranded chain and zigzag chain, respectively. The L ligands in complex 1 act as κ1, κ1‐bidentate bridging ligand, whereas the L ligands in complex 2 act as κ1‐monodentae and κ1, κ1‐bidentate bridging ligand. The molecules of these complexes are interlinked through various weak interactions that form the packed structure. All the complexes exhibit emissions which may be tentatively assigned as intraligand (IL) π→π* transitions.     

Synthesis and hydrolytic degradation of a random copolymer derived from 1,4‐dioxan‐2‐one and glycolide

Novel biodegradable copolymers, poly(1,4‐dioxan‐2‐one‐co‐glycolide) [P(DON‐co‐GA)] containing a high proportion of 1,4‐dioxan‐2‐one (DON), were synthesized by copolymerizations of DON and glycolide (GA) at 120 °C for 16 h using stannous octoate as catalyst. Chemical composition and microstructural variation of the resulting copolymer were investigated by ¹H‐ and ¹³C NMR and thermal properties by differential scanning calorimetry (DSC). From the ¹³C NMR spectra, it was observed that, apart from the expected preponderance of DON sequences, the minor component, GA, was indeed distributed at various points along the copolymer chain rather than incorporated as distinct blocks, which is consistent with a random sequence distribution. This view also was supported by the DSC results, which showed that most copolymers were amorphous except for one with a relatively high fraction of DON. The conclusion that it was a random structure rather than a statistical copolymer is discussed, using the theories about the mechanism of this type of polymerization in current as a reference. P(DON‐co‐GA) films were prepared by casting the copolymer solution in hexafluoroisopropanol (HFIP) with two concentrations of the polymeric solution (10 and 25 wt %). The in vitro hydrolytic degradation behaviors of these films were studied in phosphate buffer solution (pH = 7.4) at 37 °C and characterized by DSC, scanning electron microscopy, weight loss, and change in inherent viscosity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2558–2566, 2004     

One‐Pot Synthesis of 1,4‐Oxathiino[2,3‐b]quinoxalines or ‐pyrazines from 2,3‐Dichloroquinoxaline or ‐pyrazine and 1‐Aryl‐2‐bromoalkan‐1‐ones

An efficient one‐pot synthesis of novel heterocyclic derivatives, 2‐aryl‐1,4‐oxathiino[2,3‐b]quinoxalines or ‐pyrazines 5 , via the reaction of 2,3‐dichloroquinoxaline or ‐pyrazine with Na₂S?9 H₂O, and subsequent treatment of the resulting 2‐chloro‐3‐sodiosulfanylquinoxaline or ‐pyrazine 2 with 1‐aryl‐2‐bromo‐1‐alkanones and then NaH under mild conditions is described.     

Quantitation and pharmacokinetics of 1,4‐diamino‐2,3‐dicyano‐1,4‐bis (2‐aminophenylthio) butadiene (U0126) in rat plasma by liquid chromatography‐tandem mass spectrometry

A simple, robust, and rapid LC‐MS/MS method was developed for the quantitation of U0126 and validated in rat plasma. Plasma samples (20 μL) were deproteinized using 200 μL ACN containing 30 ng/mL of chlorpropamide, internal standard. Chromatographic separation performed on an Agilent Poroshell 120 EC‐C₁₈ column (4.6 × 50 mm, 2.7 μm particle size) with an isocratic mobile phase consisting of a 70:30 v/v mixture of ACN and 0.1% aqueous formic acid. Each sample was run at 0.6 mL/min for a total run time of 2 min per sample. Detection and quantification were performed using a mass spectrometer in selected reaction‐monitoring mode with positive ESI at m/z 381 → 123.9 for U0126 and m/z 277 → 175 for the internal standard. The standard curve was linear over a concentration range of 20–5000 ng/mL with correlation coefficients greater than 0.9965. Precision, both intra‐ and interday, was less than 10.1% with an accuracy of 90.7–99.4%. No matrix effects were observed. U0126 in rat plasma degraded approximately 41.3% after 3‐h storage at room temperature. To prevent degradation, sample handling should be on an ice bath and all solutions kept at 4°C. This method was successfully applied to a pharmacokinetic study of U0126 at various doses in rats.     

A Facile Method for the Synthesis of Hydrazine‐4‐oxothiazolidine and Imino‐5‐oxothiadiazine Derivatives from 1,4‐Disubstituted Thiosemicarbazides

1,4‐Disubstituted thiosemicarbazides reacted with dimethyl acetylenedicarboxylate with formation of (2‐hydrazono‐4‐oxothiazolidin‐5‐ylidene)acetates and, in one case, a (2‐imino‐1,3,4‐thiadiazin‐5‐on‐6‐ylidene)acetate. Several mechanistic options involving nucleophilic interaction are presented. The structures of all newly synthesized compounds were identified by ¹H NMR, ¹³C NMR, COSY, HMQC and HMBC spectral data.