Depth characterization by confocal raman microscopy of oxygen inhibition in free radical photopolymerization of acrylates: Contribution of the thiol chemistry

The oxygen inhibition of acrylate photopolymerization using visible light was depth characterized by confocal Raman microscopy. The sample thickness was found to influence the depth conversion profile. With increasing sample thickness, the conversion at the surface was increased and the oxygen‐affected layer (OAL) decreased, up to a limit where the profiles became independent of the thickness. The addition of a thiol in the acrylate mixture reduced the OAL and the conversion in this region increased. This effect was noticeable even at low concentration of thiol. Real‐time infrared spectroscopy (RT‐FTIR) experiments pointed out that for low thiol content, this beneficial effect is not only attributable to the thiol–ene process—oxygen insensitive—but also to the homopolymerization of acrylates which is enhanced. Homopolymerization and thiyl radical addition were found to have the same impact on the overall mechanism. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Germanes as efficient coinitiators in radical and cationic photopolymerizations

In this article, germanes are presented as new coinitiators for both radical and cationic photopolymerization processes. For the free radical polymerization process, the newly proposed structures are characterized by efficiencies similar or better than the reference amine. Germyl radicals are also found to be excellent initiators for free radical promoted cationic photopolymerization (FRPCP) of an epoxy resin. The associated reactivity is even better under air. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3042–3047, 2008     

Photopolymerization behavior in nanocomposites formed with thiol–acrylate and polymerizable organoclays

Because of the inherent characteristics of the thiol–ene step growth mechanism in preparation of thiol–ene photopolymer clay nanocomposites, the ratio between thiol and ene functional groups at and near the organoclay surfaces may have a significant effect on the polymerization behavior. This study investigates the influence of monomer composition and the type of polymerizable organoclay on thiol–acrylate photopolymerization behavior in preparation of photocurable clay nanocomposite systems. To this end, two types of polymerizable organoclays with acrylate or thiol functional group on the clay surfaces were compared in monomer compositions with different polarity and functionality. Real‐time infrared spectroscopy was used to characterize polymerization behavior in conjunction with photo‐DSC. The degree of clay exfoliation was evaluated using small angle X‐ray scattering and correlated with photopolymerization behavior. Higher chemical compatibility of components induced enhanced clay exfoliation resulting in increase in photopolymerization rate. By affecting the stoichiometric ratio of functional groups in the clay gallery, thiolated organoclays enhance thiol–ene reaction, whereas acrylated organoclays encourage acrylate homopolymerization. In addition, inducing more propagating thiyl radicals on the organoclay surfaces by increasing functionality of thiol monomer also facilitates thiol–ene copolymerization, whereas the increase of acrylate functionality reduces final thiol conversion. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Monitoring photopolymerization of trimethylolpropane triacrylate using a quartz crystal resonator

The UV photopolymerization of trimethylolpropane triacrylate with a photoinitiator of 2‐ethylanthraquinone is monitored using the variation of resonant resistance of a quartz crystal resonator to investigate the polymerization kinetics. The roles of initiator concentration and irradiation time are experimentally examined, and it is found that two different kinetics are involved in the photopolymerization. The initiator radicals produced by the UV light proceed the polymerization as long as the monomer remains even after the UV illumination has stopped. The experimental results indicate that the photopolymerization has the first‐order kinetics at the first‐ and the zeroth‐order kinetics followed. With the high concentration of initiator the polymerization occurs in the first‐order kinetics only, and so does with long irradiation time. The polymerization constants of the first and zeroth‐order kinetics are estimated from monitoring monomer amounts at different polymerization conditions. The photopolymerization is characterized with the FTIR spectroscopy. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Controlled photopolymerization reactions: The reactivity of new photoiniferters

Four new structures (o,o-diethyl dithiobisthioformate, isopropylxanthic disulfide, tetramethyldicarbonotrithioic diamide, and phenylacetyl disulfide) are proposed as photoiniferters for controlled photopolymerization reactions. Their photochemical properties, efficiency in controlling the photopolymerization of methyl methacrylate (MMA), and ability to photocrosslink a difunctional acrylate monomer [1,6-hexane diol diacrylate (HDDA)] are investigated. The rates of polymerization of MMA and HDDA and the number-average molecular weights (M_n's) and polydispersity indices (PDIs) of poly(methyl methacrylate) have been determined. The transient absorption spectra and interaction rate constants of the radicals have been measured. Both the (alkyloxythiocarbonyl)thiyl and (benzylcarbonyl)thiyl radicals are efficient in controlling a photopolymerization process. For a 40% monomer conversion obtained in a few minutes, the M_n values range from 6000 to 14,000, and the PDIs can reach 1.6–2.2. A fivefold reduction of the light intensity increases M_n by 25% and reduces PDI by 5%. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2436–2442, 2007     

Photo-hydroperoxidation and grafting of polyoctenamer. Access to new polymeric-hindered amine stabilizers

Polyoctenamer reacts with singlet oxygen to produce polymeric pendant hydroperoxide groups. Anthracene was used as a sensitizer for production of singlet oxygen under 365 nm irradiation. Remarkable differences were observed when the reaction was performed in the solid state or in the solution. Hydroperoxidation in the solution was much slower than in the film, and only pendant hydroperoxides were produced. Conversely, two processes take place in the film. One is the “ene” reaction of singlet oxygen with double bonds producing hydroperoxides as in the solution; the second one is a radical process producing both carbonyl products and additional hydroperoxides. This process went on after anthracene was completly consumed. Irradiation (λ > 300 nm) of hydroperoxidized polyoctenamer solution in the presence of monomers (2,2,6,6-tetramethyl or 1,2,2,6,6-pentamethyl-4-piperidyl acrylate) or stable nitroxyl radicals (stearoyloxy-2,2,6,6-tetramethyl-4-piperidyl-N-oxyl or TEMPO) grafted these monomers or stable radicals onto the polyoctenamer. Light stabilizing efficiency of grafted and low molecular additives was tested in polyoctenamer. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2599–2605, 1997     

SET‐LRP of methyl acrylate catalyzed with activated Cu(0) wire in methanol in the presence of air

Single electron transfer‐living radical polymerization (SET‐LRP) of methyl acrylate (MA) in methanol, catalyzed with nonactivated and activated Cu(0) wires, was performed in the presence of nondeoxygenated reagents and was investigated under a simple blanket of nitrogen. The addition of a small amount of hydrazine hydrate mediates the deoxygenation of the reaction mixture by the consumption of oxygen through its use to oxidize Cu(0) to Cu₂O, followed by the reduction of Cu₂O with hydrazine back to the active Cu(0) catalyst. SET‐LRP of MA in methanol in the presence of air requires a smaller dimension of Cu(0) wire, compared to the nonactivated Cu(0) wire counterpart. Activation of Cu(0) wire allowed the polymerization in air to proceed with no induction period, linear first‐order kinetics, linear correlation between the molecular weight evolution with conversion, and narrow molecular weight distribution. The retention of chain‐end functionality of α,ω‐di(bromo) poly(methyl acrylate) (PMA) prepared by SET‐LRP was demonstrated by a combination of experiments including ¹H NMR spectroscopy and matrix‐assisted laser desorption ionization–time of flight mass spectrometry after thioetherification of α,ω‐di(bromo) PMA with thiophenol. In SET‐LRP of MA in the presence of limited air, bimolecular termination is observed only above 85% conversion. However, for bifunctional initiators, the small amount of bimolecular termination observed at high conversion maintains a perfectly bifunctional polymer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Combination of transition metal carbonyls and silanes: New photoinitiating systems

The recently developed silyl radical chemistry is used in combination with transition metal carbonyls MC (dimanganese(0) decacarbonyl; dirhenium decacarbonyl; cyclopentadienyl iron(II) dicarbonyl dimer) for both free radical promoted cationic photopolymerization (FRPCP) and free radical photopolymerization (FRP). The newly developed photoinitiating systems (MC/silane and MC/silane/iodonium salt) are highly efficient under air. Photopolymerization profiles obtained upon a visible light irradiation delivered by a xenon lamp show that high conversion can be easily achieved after a 400 s exposure. Sunlight irradiations under air can also lead to tack free coatings. The processes associated with the metal carbonyl radical/silane interactions are investigated by Laser Flash Photolysis (LFP) and ESR‐Spin Trapping (ESR‐ST) experiments. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1830–1837, 2010     

Profile of oxidation in irradiated polyethylene

Following gamma irradiation in air which causes bond scission and yields large concentrations of peroxy radicals, maximum oxidation and an increase in crystallinity occurs on the surface of ultrahigh molecular weight polyethylene. Here, bimolecular reactions of peroxy radicals generate carbonyls, mostly ketones. On the polymer surface, peroxy radicals continue to react over time periods of years to generate carbonyls and chain scission. Peroxy radicals in the interior of the polymer abstract hydrogens and form hydroperoxides, inducing chain reactions and a slow but continue increase of ketone. Within the polymer sample, to a decreasing depth with increasing dose, a reduced concentration of oxygen is available to react with radiolytic radicals, so that more efficient crosslinking and a low level of hydroperoxide chain reaction occur. After long periods of time a surface maximum in carbonyl concentration is produced. Heating polyethylene in high pressures of oxygen accelerates the oxidative process. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 329–339, 1998     

Photoinduced controlled/living free‐radical polymerization of 4‐methacryloyl‐1,2,2,6,6‐pentamethyl‐piperidenyl

The photoinduced solution polymerization of 4‐methacryloyl‐1,2,2,6,6‐pentamethyl‐piperidinyl (MPMP), used as a reactive hindered amine piperidinol derivative, was performed. The obtained MPMP homopolymer had a very narrow molecular weight distribution (1.06–1.39) according to gel permeation chromatography. The number‐average and weight‐average molecular weights increased linearly with the monomer conversion, this being characteristic of controlled/living free‐radical polymerizations. Electron spin resonance signals were detected in the MPMP homopolymer and in a polymer mixture solution, and they were assigned to nitroxide radicals, which were bound to the polymer chains and persisted at a level of 10^?9 mol/L during the polymerization. Instead of the addition of mediated nitroxide radicals such as 2,2,6,6‐tetramethyl‐piperidinyl‐1‐oxy (TEMPO), those radicals (>N? O ·) were formed in situ during the photopolymerization of MPMP, and so the reaction mechanism was understood as being similar to that of TEMPO‐mediated controlled/living free‐radical polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2659–2665, 2004     

Temperature influence on the stability and chemical composition of electron beam‐irradiated polytetrafluoroethylene

Polytetrafluoroethylene powder (PTFE) was exposed to electron beam radiation in presence of air. The irradiation mainly resulted in chain scission and induction of oxygenated groups and radicals as well as unsaturation. The thermal behavior of the irradiated PTFE and the fate of the radicals were studied comprehensively. Apart from fluorine, saturated and unsaturated fluorocarbons and oxygen‐containing groups were released during heating. Furthermore, irradiation‐generated peroxy radicals were transformed into alkyl radicals in a partly reversible process. A proposal for the complex reaction mechanisms of irradiated PTFE is given. The thermal stability of irradiated PTFE was improved by annealing. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2404–2411, 1999     

Synthesis and properties of liquid crystalline urethane methacrylates for dental composite applications

Three novel liquid crystalline methacrylates have been synthesized and characterized to be tested as comonomers in light‐curing dental resin‐based composites. The selected formulations consist of an alkylammonium or cholesteryl urethane methacrylate and 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxypropyl)phenyl]propane (BisGMA) or a BisGMA derivate modified with urethane methacrylate groups, further diluted with triethyleneglycol dimethacrylate (TEGDMA) and reinforced with 70% filler (zirconium silicate nanopowder, silanized filler). This study addresses the relationships between the LC monomer structure, photopolymerization rates (by differential scanning photo calorimetry), and specific properties of the dental resin composites (volumetric shrinkage, water sorption, water solubility, and hydrophobicity). The investigation of LC properties by differential scanning calorimetry and polarizing microscopy indicated that the LC mesophase is stable to room temperature (cationic monomers) or at 40 °C (cholesteryl methacrylate). It was found that the polymerization rate for LC urethane methacrylates used in combination with BisGMA/TEGDMA (0.122–0.136 s^?1) is higher than that of the mesogenic monomers alone (0.085–0.107 s^?1). The structures of the urethane monomers and, consequently, the viscosity of the comonomer mixture influence both the rate and the degree of conversion (44.8–67.5 %) of the photopolymerization process. Polymerization shrinkage measured by pycnometry showed lower values for LC monomers (3.25–3.43 vol %) comparatively with the monomer mixture (5.19–6.65 vol %). Preliminarily, the effect of ammonium groups from two resin composites incorporating alkylammonium structures (4.5 wt %) was tested on Streptococcus mutans, and distinct zone of inhibition was observed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Photografting of polymers onto nanosized silica surface initiated by eosin moieties immobilized onto the surface

The photograft polymerization of various vinyl monomers onto nanosized silica surfaces was investigated. It was initiated by eosin moieties introduced onto the silica surface. The preparation of the silica with eosin moieties was achieved by the reaction of eosin with benzyl chloride groups on the silica surface.These were introduced by the reaction of surface silanol groups with 4‐(chloromethyl)phenyltrimethoxysilane in the presence of t‐butyl ammonium bromide as a phase‐transfer catalyst. The photopolymerization of various vinyl monomers, such as styrene, acrylamide, acrylic acid, and acrylonitrile was successfully initiated by eosin moieties on the silica surface in the presence of ascorbic acid as a reducing agent and by oxygen. The corresponding polymers were grafted from the silica surface. The grafting efficiency (percentage of grafted polymer to total polymer formed) in the photoinitiation system was much larger than that in the radical polymerization initiated by surface radicals; these radicals were formed by the thermal decomposition of azo groups introduced onto the silica surface. It was found that the polymer‐grafted silica gave stable dispersions in good solvents of grafted polymer and the wettability of the surfaces can be easily controlled by grafting of polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 600–606, 2005     

Photopolymerization with microscale resolution: Influence of the physico‐chemical and photonic parameters

This article is aimed at demonstrating that physicochemical parameters can be used to control the spatial extent (length, width, and shape) of polymer objects in view of micro‐ and nano‐fabrication applications. In particular, we showed that oxygen quenching and internal filter effects could be turned to advantage to modulate the response of the material by controlling the threshold energy of polymerization and/or the shape of the light into the photopolymerizable medium. The experimental configuration used in this study is based on light‐induced polymerization at the extremity of an optical fiber that produces polymer micro‐objects after development. Spectroscopic approaches and polymerization threshold measurements were performed to quantitatively evaluate the influence of the physicochemical parameters on the micropatterning of photopolymerizable material. Interestingly, fluorescence that is usually regarded as a process competing with photopolymerization reaction, was used for controlling the fabrication process. By this means, it was possible to better understand the impact of a nonhomogeneous irradiation on photopolymerization process and thus, to tune the shape and the size of the final polymer objects. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3783–3794, 2008     

Kinetic investigations on the photopolymerization of di- and tetrafunctional (meth)acrylic monomers in polymeric matrices. ESR and calorimetric studies. I. Reactions under irradiation

The photopolymerization of several di- and tetrafunctional (meth)acrylic monomers in the presence of a styrene–butadiene–styrene polymeric matrix (SBS) has been studied. Electron spin resonance spectroscopy (ESR) and differential scanning photocalorimetry (photo-DSC) were used as monitoring techniques to identify the photogenerated radicals and analyze photopolymerization profiles, radical environments, and radical secondary reactions. The study of the photopolymerization and/or photocrosslinking reactions of these monomers in the solid media was carried out by taking into consideration different factors, such as the influence of both monomer and photoinitiator structures on the hydrogen abstraction in the binder with formation of benzylic and allylic radicals, the polymerization of the monomers itself and the hydrogen abstraction reaction in the polymerized acrylic chains. Finally, irradiation of the system SBS/photoinitiator in the absence of monomer was also accomplished. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2775–2783, 1998     

PEW: Photopolymerization by evanescent waves. II. Revealing dramatic inhibiting effects of oxygen at submicrometer scale

A simplistic model of photopolymerization by evanescent waves (PEW) has been introduced in a previous paper. This model predicts a linear dependence of the polymerized thickness on the logarithm of exposure time. It provides the general trend of the experimental data. The present work shows that the properties of the material and the chemistry of the system also have to be taken into account to fit the experiments more precisely. Evidence was provided that dissolved oxygen has a marked effect on gel dose. In PEW the reaction is induced in very small solution volumes, so that marked competition seems to take place between reaction and diffusion. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2075–2085, 1999     

Synthesis and cationic photopolymerization of new fluorinated,polyfunctional propenyl ether oligomers

New fluorinated, polyfunctional propenyl ether functionalized resins were synthesized, and their behavior in cationic photopolymerization was investigated. The photopolymerization proceeded efficiently with a high double‐bond conversion (>90%), giving rise to UV‐cured coatings characterized by low glass‐transition temperatures (?33 °C ≤ glass‐transition temperature ≤ ?15 °C) and hydrophobic surface properties. A fluorinated additive was also employed as a reactive additive in the cationic photopolymerization of trimethylolpropane tripropenyl ether, increasing the double‐bond conversion, polymer network flexibility, thermal stability, and surface hydrophobicity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6943–6951, 2006     

Hydroperoxide formation in irradiated polyethylene

Spectroscopic analysis for hydroperoxide in irradiated ultrahigh molecular weight polyethylene, on the basis of the formation of a nitrate derivative after exposure to dilute nitric oxide, is examined. Hydroperoxide is found to be an important intermediate in the oxidation of polyethylene and is believed to result from hydrogen abstraction reactions by peroxy radicals in a polyethylene matrix. During γ irradiation in air, the rates of bimolecular combination of peroxy radicals on the surface to form ketones or hydrogen abstraction to form hydroperoxides are similar. However, as a result of bimolecular combination, the concentration of peroxy radicals decreases. After irradiation and storage in ambient air, isolated peroxy radicals below the polymer surface induce a slow chain reaction leading to a long-term increase in hydroperoxides and carbonyls. Differences in hydroperoxide and oxygen content for samples irradiated in air or vacuum are primarily confined to or near the surface. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3309–3316, 1999     

Photoinitiated polymerization in bicontinuous microemulsions: Fluorescence monitoring

The photopolymerization of bicontinuous microemulsions was simultaneously monitored with differential scanning calorimetry and fluorescence. The kinetics and mechanism of the reaction were studied throughout the entire photopolymerization reaction. The role played by the surfactant in the kinetics and morphology was studied. The nature of the surfactant changed the autoacceleration process and final conversion. The behavior was explained as a result of the differences in the interfacial properties. Anionic cetyltrimethylammonium bromide (CTAB) gave rise to a more flexible interfacial film than anionic sodium dodecyl sulfate (SDS), resulting in competition between the intramolecular and intermolecular reactions in the former systems. As cyclization did not contribute to the increase in the degree of crosslinking, SDS photopolymerization gave solids with a more rigid microstructure. Fluorescence methodology was applied to monitor bicontinuous microemulsion polymerization and to reveal the microstructure and morphology development during photopolymerization. The microemulsion composition was designed to prepare nanoporous, crosslinked materials. Even though the nanostructure of the precursor microemulsions was not retained because of phase separation during polymerization, mesoporous solids were obtained. Their morphologies depended on the nature of the surfactant, and membranes with open cells were successfully prepared with CTAB, whereas more complex morphologies resulted with SDS. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5291–5303, 2006     

Enhancing cationic ring‐opening photopolymerization of cycloaliphatic epoxides via dark cure and oxetanes

Due to the longevity of the cationic active centers, cationic ring‐opening photopolymerization can continue after illumination ceases. In addition, substantial reactivity enhancement for epoxides is realized through copolymerization with oxetanes. Here, the separate reactions of epoxide and oxetane moieties were resolved during illumination and subsequent dark cure via real‐time Raman spectroscopy. Using oxetane additives, reactivity and conversion of 3,4‐epoxycyclohexylmethyl‐3′,4′‐epoxycyclohexane carboxylate (EEC) were improved during illumination and subsequent dark cure through modulation of the initial formulation viscosity and selection of the oxetane secondary functional groups. The largest enhancement in reactivity occurred with secondary groups comprising either aliphatic chains with their flexibility or hydroxyls with their chain‐transfer capacity. In contrast, oxetanes containing UV‐absorbing phenyl rings reduced the initiation efficiency, and difunctional oxetanes suppressed overall conversion through additional crosslinking. Although bulk conversion was directly related to initial formulation viscosity, the impact of the oxetane secondary functional groups was greater. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1436–1445