Potentiometric titration of palladium(II) halide complex anions based on ion-pair formation

Palladium(II) halide complex anions can be titrated with different quaternary salt solutions. Titrations can be monitored potentiometrically with a simple PVC membrane-coated aluminium wire electrode. A comparative study with different cationic titrants showed the dependence of the titration stoichiometry on the structure of the cationic reagent used. The procedures can be utilized for monitoring the Pd(II) concentration in galvanic contact baths.     

Potentiometric titration of hydrogen peroxide with an electropolished stainless steel electrode

The preparation and use of a stainless steel indicator electrode in the accurate potentiometric titration of aqueous hydrogen peroxide are described. The results agree excellently with those obtained by a standard colorimetric weight-titration procedure. The nature of the titration curves, potential changes and the factors affecting them are discussed. Rapid potentiometric titrations directly to the equivalence-point potential are possible, owing to the nature of the titration curve.     

Potentiometric titration of plutonium

In the potentiometric titration of plutonium(III), it has been customary to take the equivalence point as the inflection point on a plot of potential vs. volume of titrant.¹ That the stoichiometric end point corresponds to the inflection point does not seem to have been theoretically demonstrated, however. The purpose of this letter is to suggest that these points may not correspond in the potentiometric titration of plutonium(III). Mound Laboratory is operated by Monsanto Research Corporation for USERDA under contract No. EY-76-C-04-0053.     

Potentiometric titration of lignosulfonic acids

The conditions of potentiometric titration of lignosulfonic acids allowing quantitative determination of strongly and weakly acidic functional groups in lignosulfonates were determined.     

Potentiometric titration of diprotic systems

 The approximate nature of Gran’s method of linearization of potentiometric titration curves applied to diprotic systems has been thoroughly investigated. A function involving pH and titrant volume V (which is linearly dependent on V and becomes zero at the first equivalent point of titration of a weak diprotic base with a strong monoprotic acid) has been critically examined and validated by means of widely extended simulated experiments. Accurate experimental confirmation of the theoretical expressions has been obtained by performing many real titrations of the primary standard Na₂CO₃ with HCl. This particular application, analytically significant itself, can be a prototype of analogous applications. Received: 25 March 1996/Revised: 15 November 1996/Accepted: 19 November 1996     

Potentiometric titration of diprotic systems

 The approximate nature of Gran’s method of linearization of potentiometric titration curves applied to diprotic systems has been thoroughly investigated. A function involving pH and titrant volume V (which is linearly dependent on V and becomes zero at the first equivalent point of titration of a weak diprotic base with a strong monoprotic acid) has been critically examined and validated by means of widely extended simulated experiments. Accurate experimental confirmation of the theoretical expressions has been obtained by performing many real titrations of the primary standard Na₂CO₃ with HCl. This particular application, analytically significant itself, can be a prototype of analogous applications. Received: 25 March 1996/Revised: 15 November 1996/Accepted: 19 November 1996     

Potentiometric titration of metal ions in ethanol

The potentiometric titrations of Zn2+, Cu2+ and 12 Ln3+ metal ions were obtained in ethanol to determine the titration constants (defined as the at which the [-OEt]/[Mx+]t ratios are 0.5, 1.5, and 2.5) and in two cases (La3+ and Zn2+) a complete speciation diagram. Several simple monobasic acids and aminium ions were also titrated to test the validity of experimental titration measurements and to establish new constants in this medium that will be useful for the preparation of buffers and standard solutions. The dependence of the titration constants on the concentration and type of metal ion and specific counterion effects is discussed. In selected cases, the titration profiles were analyzed using a commercially available fitting program to obtain information about the species present in solution, including La3+ for which a dimer model is proposed. The fitting provides the microscopic values for deprotonation of one to four metal-bound ethanol molecules. Kinetics for the La3+-catalyzed ethanolysis of paraoxon as a function of are presented and analyzed in terms of La3+ speciation as determined by the analysis of potentiometric titration curves. The stability constants for the formation of Zn2+ and Cu2+ complexes with 1,5,9-triazacyclododecane as determined by potentiometric titration are presented.     

Potentiometric titration of permanganate with resacetophenone oxime

Milligram amounts of permanganate can be titrated with resacetophenone oxime (4-acetylresorcinol oxime) as a reducing titrant in the presence of phosphoric acid (0.5 M). The stoichiometry between permanganate and the oxime is 3:1 (MnO₄^-:oxime). The titration is successful in the presence of large amounts of dichromate or vanadate or moderate amounts of cerium(IV).     

Potentiometric and coulometric titration of 2-thiobarbituric acid

A new method for the determination of 2-thiobarbituric acid, using its reaction with iodine in an alkaline medium is presented. In the volumetric titration with potentiometric end-point detection, the determinability range is 10-400 micromol (1.4-58 mg). In coulometric titration using the biamperometric end-point detection, 0.1-20 micromol (1.4 x 10(-2)-2.9 mg) of 2-thiobarbituric acid was successfully determined.     

Potentiometric titration of organic cations precipitated by tetraphenylborate

Summary Sodium tetraphenylborate has been used for the potentiometric precipitation titration of some water-soluble organic cations, mostly those containing a quaternary ammonium group. Emf's were monitored with a fluoroborate ion-selective indicator electrode and a double-junction reference electrode. Other liquid-membrane electrodes, such as the perchlorate and nitrate, also respond to the cations investigated. The solid-state cyanide electrode responds to those cations yielding potentiometric breaks of > 70 mV with the fluoroborate electrode. The following compounds were examined: procaine, diphenhydramine, chlorpheniramine, methylene blue, dimethyl yellow, benzidine, pyridine, acetylmethylcholine, thiamine.This paper was presented at the International Symposium on Electroanalysis in Cardiff, England, on April 13, 1981     

Potentiometric titration of tellurium with a fluoride-selective electrode

Tellurium, as tellurite, can be determined with a fluoride-selective electrode by means of an indirect procedure based on precipitation of tellurite with excess of lanthanum(III), followed by back-titration with standard fluoride. The end-point is located by using the Gran method, and the titrations are suitable for tellurite concentrations above 1 mM.     

Suzuki-Miyaura coupling on heterogeneous palladium catalysts

Summary Five supported heterogeneous Pd catalysts have been prepared, characterized and found to be active and selective in the Suzuki-Miyaura coupling of boronic acids, and aromatic iodo and bromo compounds to form the corresponding biaryls in high selectivities. Reaction conditions, namely, the solvent, base (triethylamine, Na₂CO₃, Cs₂CO₃) and tetrabutylammonium chloride as an additive are shown to have profound effects on catalyst performance.</o:p>     

X-ray study of palladium catalysts. Influence of thermal treatment in hydrogen on the phase composition

The thermal treatment of Pd catalysts in a reducing atmosphere of hydrogen leads to interaction of supported metal and support to form solid solutions.

---

, .

     

Homogeneous nanosize palladium catalysts

Expanding the catalytic environment to a nanosize must be one of the most promising ways to improve the performance of homogeneous catalysts. In this Forum Article, recent developments in homogeneous nanosize palladium catalysts are reviewed. It contains solubilized palladium nanoparticles, metalated dendrimers, and complexes with well-defined nanosized ligands. These systems realize efficient catalyst recycling, unique selectivity, suppression of metal aggregation, and remarkable enhancement of the catalytic activity.     

Potentiometric titration of trace amounts of mercury with dithiooxamide

Titration with dithiooxamide in potassium hydrogenphthalate medium (pH 5–6) is suitable for the determination of mercury in concentrations above 0.05 ppm. The precision in the range 0.05–1.0 ppm Hg is ? 4%. Significant amounts of sulphate, nitrate, Zn²⁺, Cd²⁺ and Pb²⁺ and small amounts of Ni²⁺, Co²⁺ and Al³⁺ can be tolerated, but Fe³⁺, Cu²⁺ and Ag⁺ interfere.     

Hydrocarboxylation of polybutylene on palladium complex catalysts

Conclusions The introduction of carboxyl groups into up to 60% of the double bonds in a polybutadiene sample is possible at 90–170°C and 2.0–14.0 MPa in the presence of PdCl₂(PPh₃)₂ and added PPh₃.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 6, pp. 1390–1392, June, 1989.The authors express their gratitude to S. D. Sominskii for assistance in carrying out the IR studies.     

Potentiometric titration of heterocyclic nitrogen bases in non-aqueous media

Pyridine, quinoline, isoquinoline, acridine, alpha-picoline, beta-picoline, gamma-picoline and 2,6-lutidine have been titrated potentio-metrically (calomel and glass electrodes), with chlorosulphonic acid in methyl ethyl ketone-acetic acid (1:1) medium, with an error of less than 1%.     

Potentiometric titration of gold in ores with potassium iodide

Summary A direct potentiometric titration method for the determination of gold in ores and alloys is described. It is based on the reduction of Au(III) with iodide ions yielding accurate and reproducible results. Detection limit and sensitivity were 0.06 and 0.032 mg/l Au, respectively. The linear response range was between 0.1 and 120 mg/l Au. The method can be used for the routine assay of gold in different kind of samples.