糖蛋白-凝集素自组装构筑有序膜及在酶电极的应用

利用糖蛋白-凝集素的识别作用交替沉积伴刀豆球蛋白（Con A）与辣根过氧化物酶(HRP)制备酶自组装多层膜，用原子力显微镜（AFM）观测了自组装膜的表面形貌、表面粗糙度； AFM和椭圆偏振研究测定了自组装膜的厚度.结果表明, Con A和HRP膜厚分别为9.0和4.6 nm，与两者的晶体衍射结果一致，说明生物识别自组装方法能很好地保持分子的原有形态.以亚甲蓝（MB）溶液为介体，用循环伏安法测定了表面修饰了三层（Con A/HRP）自组装膜的金电极对H2O2的电化学催化还原作用，在H2O2浓度为0.2～1.0 mmol•L－1时，响应电流对H2O2浓度变化成线性，酶电极灵敏度为24.0 mA•mol－1•L，表观米氏常数为4.2 mmol•L－1.     

Comparative characterisation by atomic force microscopy and ellipsometry of soft and solid thin films

Ellipsometry and atomic force microscopy (AFM) were used to study the film thickness and the surface roughness of both ‘soft’ and solid thin films. ‘Soft’ polymer thin films of polystyrene and poly(styrene–ethylene/butylene–styrene) block copolymer were prepared by spin‐coating onto planar silicon wafers. Ellipsometric parameters were fitted by the Cauchy approach using a two‐layer model with planar boundaries between the layers. The smooth surfaces of the prepared polymer films were confirmed by AFM. There is good agreement between AFM and ellipsometry in the 80–130 nm thickness range. Semiconductor surfaces (Si) obtained by anisotropic chemical etching were investigated as an example of a randomly rough surface. To define roughness parameters by ellipsometry, the top rough layers were treated as thin films according to the Bruggeman effective medium approximation (BEMA). Surface roughness values measured by AFM and ellipsometry show the same tendency of increasing roughness with increased etching time, although AFM results depend on the used window size. The combined use of both methods appears to offer the most comprehensive route to quantitative surface roughness characterisation of solid films. Copyright © 2007 John Wiley & Sons, Ltd.     

Characterization of IgG Langmuir-Blodgett films immobilized on functionalized polymers

The bioactivity of anti-human IgG Langmuir-Blodgett (LB) films, the non-specific adsorption of protein and the topography of anti-IgG LB films have been studied for application in immunosensors. The antibody (AB) LB films were horizontally deposited on glass and functionalized polymers, such as carboxy-poly(vinyl chloride) (PVC-COOH), chloropropyl and aminopropyl sol-gel. The LB films were characterized by means of ellipsometry, atomic force microscopy (AFM) and bicinchoninic acid (BCA) protein test. The interpretation of ellipsometric data was performed using a one-layer model. Non-specifically adsorbed protein was desorbed by washing the IgG film in 0.5 M NaCl, 2 M NaCl and 1% N-cetyl-N,N,N-trimethylammoniumbromide detergent solution resulting in a 50% reduction of the film thickness. The mean thickness of an anti-IgG film on glass measured by ellipsometry, PVC-COOH and aminopropyl sol-gel was 9+/-2, 11+/-1 and 23+/-8 nm, respectively. According to the BCA test 6-8 mug antibody (AB) per slide was bound to the functionalized polymers, but only 3 mug AB per slide was adsorbed on glass. The average distance of anti-IgG granules as indicated by AFM measurements on PVC-COOH, chloropropyl and aminopropyl sol-gel was 42+/-20, 34+/-3 and 23+/-4 nm. The average distance of granular AB structures on glass, however, was 150+/-50 nm.     

Preparation of Poly(acrylic acid) Nano-films by In-situ Polymerization of Acrylic Acid Macroclusters on Silicon Oxide Surfaces

A new method for preparing poly(acrylic acid) (PAA) films on silicon oxide surfaces with smooth morphology has been developed. Acrylic acid (AA) was preferably adsorbed on silicon oxide surfaces in AA/ chloroform binary liquids and formed a hydrogen-bonded organized structure, which was called molecular macrocluster. AA macroclusters on silicon oxide surfaces were in-situ polymerized to obtain molecularly flat polymer films with thickness up to 10 nm. In-situ polymerizations were conducted by photo-irradiation in the presence of a photo initiator, 2,2-dimethoxy-2-phenylacetophenone (DPA). As a reference, the adsorption of PAA polymerized in the bulk solution was examined on silicon oxide surfaces. A series of techniques such as attenuated total reflection–FTIR (ATR-FTIR) spectroscopy, ellipsometry and atomic force microscopy (AFM) was utilized for characterizing two types of films. It was found that flat PAA films with linear hydrogen-bonded COOH could only be obtained by in-situ polymerization, which demonstrated this method was an effective way for preparing molecularly uniform polymer films. The surface morphology and thickness of obtained PAA films were found to be dependent on the monomer concentration, initiator amount and photoirradiation time. Molecularly uniform and flat PAA films were obtained after 5 min irradiation at 0.8 mol% AA in the presence of 5 wt% DPA.     

Surface characterization of 3-glycidoxypropyltrimethoxysilane films on silicon-based substrates

Silane coupling agents are commonly used to activate surfaces for subsequent immobilization of biomolecules. The homogeneity and surface morphology of silane films is important for controlling the structural order of immobilized single-stranded DNA probes based on oligonucleotides. The surfaces of silicon wafers and glass slides with covalently attached 3-glycidoxypropyltrimethoxysilane (GOPS) have been characterized by using angularly dependent X-ray photoelectron spectroscopy (XPS), time-of-flight secondary-ion mass spectrometry (ToF–SIMS), atomic force microscopy (AFM), scanning electron microscopy (SEM), and monochromatic and spectroscopic ellipsometry. XPS and ToF–SIMS data provided evidence of complete surface coverage by GOPS. Data from angularly resolved XPS and ellipsometry methods suggested that the GOPS films were of monolayer thickness. AFM and SEM data indicated the presence of films that consisted of nodules approximately 50–100 nm in diameter. Modeling suggested that the nodules may lead to a nanoscale structural morphology that might influence the hybridization kinetics and thermodynamics of immobilized oligonucleotides.     

Lectins and/or xyloglucans/alginate layers as supports for immobilization of dengue virus particles

Formation of stable thin films of mixed xyloglucan (XG) and alginate (ALG) onto Si/SiO(2) wafers was achieved under pH 11.6, 50mM CaCl(2), and at 70 degrees C. XG-ALG films presented mean thickness of (16+/-2)nm and globules rich surface, as evidenced by means of ellipsometry and atomic force microscopy (AFM), respectively. The adsorption of two glucose/mannose-binding seed (Canavalia ensiformis and Dioclea altissima) lectins, coded here as ConA and DAlt, onto XG-ALG surfaces took place under pH 5. Under this condition both lectins present positive net charge. ConA and DAlt adsorbed irreversibly onto XG-ALG forming homogenous monolayers approximately (4+/-1)nm thick. Lectins adsorption was mainly driven by electrostatic interaction between lectins positively charged residues and carboxylated (negatively charged) ALG groups. Adhesion of four serotypes of dengue virus, DENV (1-4), particles to XG-ALG surfaces were observed by ellipsometry and AFM. The attachment of dengue particles onto XG-ALG films might be mediated by (i) H bonding between E protein (located at virus particle surface) polar residues and hydroxyl groups present on XG-ALG surfaces and (ii) electrostatic interaction between E protein positively charged residues and ALG carboxylic groups. DENV-4 serotype presented the weakest adsorption onto XG-ALG surfaces, indicating that E protein on DENV-4 surface presents net charge (amino acid sequence) different from E proteins of other serotypes. All four DENV particles serotypes adsorbed similarly onto lectin films adsorbed. Nevertheless, the addition of 0.005mol/L of mannose prevented dengue particles from adsorbing onto lectin films. XG-ALG and lectin layers serve as potential materials for the development of diagnostic methods for dengue.     

Effect of low molecular weight additives on immobilization strength, activity, and conformation of protein immobilized on PVC and UHMWPE

Horseradish peroxidase (HRP) was immobilized onto both plasticized and unplasticized polyvinylchloride (PVC) and ultrahigh molecular weight polyethylene (UHMWPE). Plasma immersion ion implantation (PIII) in a nitrogen plasma with 20 kV bias was used to facilitate covalent immobilization and to improve the wettability of the surfaces. The surfaces and immobilized protein were studied using attenuated total reflection infrared (ATR-IR) spectroscopy and water contact angle measurements. Protein elution on exposure to repeated sodium dodecyl sulfate (SDS) washing was used to assess the strength of HRP immobilization. The presence of low molecular weight components (plasticizer, additives in solvent, unreacted monomers, adsorbed molecules on surface) was found to have a major influence on the strength of immobilization and the conformation of the protein on the samples not exposed to the PIII treatment. A phenomenological model considering interactions between the low molecular weight components, the protein molecule, and the surface is developed to explain these observations.     

Preparation and characterization of thin films of SiO(x) on gold substrates for surface plasmon resonance studies

We report here on the fabrication and characterization of stable thin films of amorphous silica (SiO(x)) deposited on glass slides coated with a 5 nm adhesion layer of titanium and 50 nm of gold, using the plasma-enhanced chemical vapor deposition (PECVD) technique. The resulting surfaces were characterized using atomic force microscopy (AFM), ellipsometry, contact angle measurements, and surface plasmon resonance (SPR). AFM analysis indicates that homogeneous films of silica with low roughness were formed on the gold surface. The deposited silica films showed excellent stability in different solvents and in piranha solution. There was no significant variation in the thickness or in the SPR signal after these harsh treatments. The Au/SiO(x) interfaces were investigated for their potential applications as new surface plasmon resonance sensor chips. Silica films with thicknesses up to 40 nm allowed visualization of the surface plasmon effect, while thicker films resulted in the loss of the SPR characteristics. SPR allowed further the determination of the silica thickness and was compared to ellipsometric results. Chemical treatment of the SiO(x) film with piranha solution led to the generation of silanol surface groups that have been coupled with a trichlorosilane.     

Morphological studies of spin-coated films of poly(styrene-block-methyl methacrylate) copolymers by atomic force microscopy

The surface structure of very thin (15–20 nm) spin-coated films of a symmetrical poly(styrene-b-methyl-methacrylate) block copolymer on silicon and mica is analyzed by atomic force microscopy (AFM). The films show a surface corrugation of a very regular 100 nm lateral periodicity and 6–8 nm amplitude. Film thickness is measured by AFM at induced film defects and checked by ellipsometry. XPS shows that both blocks are at the film surface. Selective degradation of the methyl methacrylate block is used for contrast enhancement and allows to assign poly(styrene) to the elevated surface regions and poly(methyl methacrylate) to the substrate/film interface.Friction interactions of the AFM tip with the film surface may be used to induce high orientational ordering of the morphological pattern perpendicular to the fast scan direction.     

The determination of thickness and surface mass density of mesothick immunoprecipitate layers by null ellipsometry and protein 125iodine labeling

The aim of the present study was to ellipsometrically determine the thickness and surface mass density in air for up to 110-nm-thick organic layers made of alternatingly deposited layers of HSA and polyclonal anti-HSA on hydrophobic silicon. The ellipsometrically determined thickness was compared to that obtained by AFM and the deposited surface mass density calibrated with (125)I-labeled proteins. The results indicate a good agreement in protein layer thickness between AFM and ellipsometry when the protein film refractive index N(film)=1.5-0i, although then the calculated surface mass density from the ellipsometry data became grossly overestimated by the Cuypers one-component formula. A good agreement in the surface mass density was obtained when the M/A ratio in this formula was lowered from 4.14 to 2.35. This approach indicates a convenient means of determining the refractive indices and surface mass densities of mesothick organic layers proteins on solid supports.     

Interface thickness of the incompatible polymer system PS/PnBMA as measured by neutron reflectometry and ellipsometry

The techniques of neutron reflectometry and spectroscopic ellipsometry are compared as methods to measure the interface width between immiscible polymers. The interface thickness of the incompatible polymer system of polystyrene (PS) and polyn-butyl methacrylate) (PnBMA) is determined by neutron reflectrometry to (6.4±0.2) nm and (8.6±0.2) nm at temperatures of 120 and 156°C, respectively. Some emphasis is put on the measurement of those values also by spectroscopic ellipsometry using the same materials. A special sample geometry is chosen for ellipsometric measurements to compensate for thickness changes of films during annealing, and the dispersions of PS and PnBMA films are determined. With respect to the determination of the interface widths, however, it turns out that in the available wavelength range of 280 to 700 nm spectroscopic ellipsometry is not sensitive enough to measure the thin interface width between PS and PnBMA films. Neutron reflectivity results obtained for PS/PnBMA are discussed with respect to the Flory-Huggins segment interaction parameter calculated within the approximations of meanfield theory.     

Medium energy,heavy and inert ion irradiation of metallic thin films: studies of surface nano‐structuring and metal burrowing

In context to the ion induced surface nanostructuring of metals and their burrowing in the substrates, we report the influence of Xe and Kr ion‐irradiation on Pt:Si and Ag:Si thin films of ~5‐nm thickness. For the irradiation of thin films, several ion energies (275 and 350 keV of Kr; 450 and 700 keV of Xe) were chosen to maintain a constant ratio of the nuclear energy loss to the electronic energy loss (S_n/S_e) in Pt and Ag films (five in present studies). The ion‐fluence was varied from 1.0 × 10¹⁵ to 1.0 × 10¹⁷ ions/cm². The irradiated films were characterized using Rutherford backscattering spectroscopy (RBS), atomic force microscopy (AFM) and scanning electron microscopy (SEM). The AFM and SEM images show ion beam induced systematic surface nano‐structuring of thin films. The surface nano‐structures evolve with the ion fluence. The RBS spectra show fluence dependent burrowing of Pt and Ag in Si upon the irradiation of both ion beams. At highest fluence, the depth of metal burrowing in Si for all irradiation conditions remains almost constant confirming the synergistic effect of energy losses by the ion beams. The RBS analysis also shows quite large sputtering of thin films bombarded with ion beams. The sputtering yield varied from 54% to 62% by irradiating the thin films with Xe and Kr ions of chosen energies at highest ion fluence. In the paper, we present the experimental results and discuss the ion induced surface nano‐structuring of Pt and Ag and their burrowing in Si. Copyright © 2016 John Wiley & Sons, Ltd.     

Characterization of self-assembled monolayers of thiols on Au(111)

Self-assembled monolayers (SAMs) of n-butanethiol, n-dodecanethiol and their equimolar mixture on Au(111) were prepared and characterized by ellipsometry, contact angle measurement, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Results revealed that these SAMs are oriented ultrathin films with the thickness of nanometer scale, and the SAMs were influenced by the molecular chain length, the lattice orientation and cleanliness of the substrates. The surface of the longer chain SAM is hydrophobic. The thicknesses of three SAMs of n-butanethiol, n-dodecanethiol and their mixture revealed by ellipsometry and XPS are about 0.59 - 0.67nm, 1.60- 1.69 nm and 1.23 - 1.32nm, respectively. AFM images further demonstrated that the SAM formed by the mixture has some microdomains with two different thicknesses.     

Surface morphology and biological activity of protein thin films produced by electrospray deposition

Protein thin films were prepared by the electrospray deposition (ESD) method from aqueous solutions of alpha-lactalbumin (alpha-LA) at different concentrations, and their surface morphologies and biological activities were characterized. The surface morphologies of the deposited films were observed using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The SEM and AFM images showed that the film surfaces had a fine porous structure, in which the pore diameters ranged from 40 to 600 nm. The biological activities of the cross-linked protein films were tested by the mechanochemical method. The response to calcium ion (Ca(2+)) demonstrated that the biological activity of the films was preserved. These results indicate that the ESD method is potentially useful for the fabrication of active protein thin films. The freestanding protein thin films prepared by ESD and postdeposition cross-linking provide novel options for protein-based biomaterials.     

Self-assembled monolayers of an oligo(ethylene oxide) disulfide and its corresponding thiol assembled from water: characterization and protein resistance

Self-assembled monolayers (SAMs) of the disulfide [S(CH2CH2O)6CH3]2 ([S(EO)6]2) on Au from 95% ethanol and from 100% water are described. Spectroscopic ellipsometry and reflection-absorption infrared spectroscopy indicate that the [S(EO)6]2 films are similar to the disordered films of HS(CH2CH2O)6CH3 ((EO)6) and HS(CH2)3O(CH2CH2O)5CH3 (C3EO5) at their protein adsorption minima. The [S(EO)6]2 SAMs exhibit constant film thickness (d) of 1.2 +/- 0.2 nm over long immersion times (up to 20 days) and do not attain the highly ordered, 7/2 helical structure of the (EO)6 and C3EO5 SAMs (d = 2.0 nm). Exposure of these self-limiting [S(EO)6]2 SAMs to bovine serum albumin show high resistance to protein adsorption.     

Stability of monomolecular films of archaebacterial tetraether lipids on silicon wafers: a comparison of physisorbed and chemisorbed monolayers

The monomolecular organisation of symmetric, chemically modified tetraether lipids caldarchaeol-PO(4) was studied using Langmuir film balance, ellipsometry, and atomic force microscopy (AFM). Solid silicon wafer substrates were modified to hydrophobic, hydrophilic, and amino-silanised surfaces; and Langmuir-Blodgett (LB)-films were transferred onto each. LB-caldarchaeol-PO(4) films were subjected to further rinsing with organic solvent and additional physical treatments, to compare their resistance and stability on chemisorbed (amino-silanised) and physisorbed (hydrophobic and hydrophilic) surfaces. The resistance and stability of these monolayer films was characterized by ellipsometry and AFM, and film thickness was determined using ellipsometry. AFM was also employed to observe surface morphology. Monolayer films on hydrophobic surfaces were found to be more resistant to rinsing with organic solvent and additional physical treatments than monolayer films on either amino-silanised or hydrophilic surfaces. The hydrophobic effect with hydrophobic surfaces appears to support the formation of stronger caldarchaeol-PO(4) films on silicon wafer substrates, with increased resistance and stability.     

Thickness and morphology of polyelectrolyte coatings on silica surfaces before and after protein exposure studied by atomic force microscopy

Analyte–wall interaction is a significant problem in capillary electrophoresis (CE) as it may compromise separation efficiencies and migration time repeatability. In CE, self-assembled polyelectrolyte multilayer films of Polybrene (PB) and dextran sulfate (DS) or poly(vinylsulfonic acid) (PVS) have been used to coat the capillary inner wall and thereby prevent analyte adsorption. In this study, atomic force microscopy (AFM) was employed to investigate the layer thickness and surface morphology of monolayer (PB), bilayer, (PB-DS and PB-PVS), and trilayer (PB-DS-PB and PB-PVS-PB) coatings on glass surfaces. AFM nanoshaving experiments providing height distributions demonstrated that the coating procedures led to average layer thicknesses between 1 nm (PB) and 5 nm (PB-DS-PB), suggesting the individual polyelectrolytes adhere flat on the silica surface. Investigation of the surface morphology of the different coatings by AFM revealed that the PB coating does not completely cover the silica surface, whereas full coverage was observed for the trilayer coatings. The DS-containing coatings appeared on average 1 nm thicker than the corresponding PVS-containing coatings, which could be attributed to the molecular structure of the anionic polymers applied. Upon exposure to the basic protein cytochrome c, AFM measurements showed an increase of the layer thickness for bare (3.1 nm) and PB-DS-coated (4.6 nm) silica, indicating substantial protein adsorption. In contrast, a very small or no increase of the layer thickness was observed for the PB and PB-DS-PB coatings, demonstrating their effectiveness against protein adsorption. The AFM results are consistent with earlier obtained CE data obtained for proteins using the same polyelectrolyte coatings.     

Dendrimer-functionalized self-assembled monolayers as a surface plasmon resonance sensor surface

We report here a multistep route for the immobilization of DNA and proteins on chemically modified gold substrates using fourth-generation NH(2)-terminated poly(amidoamine) dendrimers supported by an underlying amino undecanethiol (AUT) self-assembled monolayer (SAM). Bioactive ultrathin organic films were prepared via layer-by-layer self-assembly methods and characterized by fluorescence microscopy, variable angle spectroscopic ellipsometry, atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and attenuated total internal reflection Fourier transform infrared spectroscopy (ATR-FTIR). The thickness of the AUT SAM base layer on the gold substrates was determined to be 1.3 nm from ellipsometry. Fluorescence microscopy and AFM measurements, in combination with analyses of the XPS/ATR-FTIR spectra, confirmed the presence of the dendrimer/biopolymer molecules on the multilayer sensor surfaces. Model proteins, including streptavidin and rabbit immunoglobulin proteins, were covalently attached to the dendrimer layer using linear cross-linking reagents. Through surface plasmon resonance measurements, we found that sensor surfaces containing a dendrimer layer displayed an increased protein immobilization capacity, compared to AUT SAM sensor surfaces without dendrimer molecules. Other SPR studies also revealed that the dendrimer-based surfaces are useful for the sensitive and specific detection of DNA-DNA interactions. Significantly, the multicomponent films displayed a high level of stability during repeated regeneration and hybridization cycles, and the kinetics of the DNA-DNA hybridization process did not appear to be influenced by surface mass transport limiting effects.     

Characteristics of thin cellulose ester films spin-coated from acetone and ethyl acetate solutions

Spin-coated films of cellulose acetate (CA), cellulose acetate propionate (CAP), cellulose acetate butyrate (CAB) and carboxymethylcellulose acetate butyrate (CMCAB) have been characterized by ellipsometry, atomic force microscopy (AFM) and contact angle measurements. The films were spin-coated onto silicon wafers, a polar surface. Mean thickness values were determined by means of ellipsometry and AFM as a function of polymer concentration in solutions prepared either in acetone or in ethyl acetate (EA), both are good solvents for the cellulose esters. The results were discussed in the light of solvent evaporation rate and interaction energy between substrate and solvent. The effects of annealing and type of cellulose ester on film thickness, film morphology, surface roughness and surface wettability were also investigated. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Thickness, surface morphology, and optical properties of porphyrin multilayer thin films assembled on Si(100) using copper(I)-catalyzed azide-alkyne cycloaddition

We report the structure, optical properties and surface morphology of Si(100) supported molecular multilayers resulting from a layer-by-layer (LbL) fabrication method utilizing copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC), also known as "click" chemistry. Molecular based multilayer films comprised of 5,10,15,20-tetra(4-ethynylphenyl)porphyrinzinc(II) (1) and either 1,3,5-tris(azidomethyl)benzene (2) or 4,4'-diazido-2,2'-stilbenedisulfonic acid disodium salt (3) as a linker layer, displayed linear growth properties up to 19 bilayers. With a high degree of linearity, specular X-ray reflectivity (XRR) measurements yield an average thickness of 1.87 nm/bilayer for multilayers of 1 and 2 and 2.41 nm/bilayer for multilayers of 1 and 3. Surface roughnesses as determined by XRR data fitting were found to increase with the number of layers and generally were around 12% of the film thickness. Tapping mode AFM measurements confirm the continuous nature of the thin films with roughness values slightly larger than those determined from XRR. Spectroscopic ellipsometry measurements utilizing a Cauchy model mirror the XRR data for multilayer growth but with a slightly higher thickness per bilayer. Modeling of the ellipsometric data over the full visible region using an oscillator model produces an absorption profile closely resembling that of a multilayer grown on silica glass. Comparing intramolecular distances from DFT modeling with experimental film thicknesses, the average molecular growth angles were estimated between 40° and 70° with respect to the substrate surface depending on the bonding configuration.