Intercalation of Norfloxacin into Layered Double Hydroxides by Delamination/Restacking Process and its Controlled-Release Property

Norfloxacin (NFX)-layered double hydroxide (LDH) intercalated nanocomposite was synthesized by delamination/restacking process. In this method, LDH particles were first delaminated to well-dispersed two-dimensional nanosheets in formamide, and then the LDH nanosheets and NFX anions co-assembled into NFX-LDH nanocomposite. Characterization by powder x-ray diffraction, Fourier transform infrared spectroscopy, elemental analysis, and thermogravimetry revealed that the product had an expanded LDH structure. This finding indicated that NFX was successfully intercalated into LDH layers, and NFX had both horizontal and vertical orientation in the interlayers of NFX-LDH nanocomposite. Additionally, the delamination/restacking method displayed various remarkable advantages such as simple procedure, short reaction time, and mild conditions compared with the conventional methods of ion exchange, co-precipitation, and reconstruction. Results further showed that the thermal stability of NFX greatly improved after intercalation into LDH layers and that NFX release of the NFX-LDH nanocomposite was gradual, suggesting potential use as an effective drug delivery system.     

Design and in vitro evaluation of zidovudine oral controlled release tablets prepared using hydroxypropyl methylcellulose

Oral controlled release matrix tablets of zidovudine were prepared using different proportions and different viscosity grades of hydroxypropyl methylcellulose. The effect of various formulation factors like polymer proportion, polymer viscosity and compression force on the in vitro release of drug were studied. In vitro release studies were carried out using United States Pharmacopeia (USP) type 1 apparatus (basket method) in 900 ml of pH 6.8 phosphate buffer at 100 rpm. The release kinetics were analyzed using Zero-order model equation, Higuchi's square-root equation and Ritger-Peppas' empirical equation. Compatibility of drug with various formulations excipients used was studied. In vitro release studies revealed that the release rate decreased with increase in polymer proportion and viscosity grade. Increase in compression force was found to decrease the rate of drug release. Matrix tablets containing 10% hydroxypropyl methylcellulose (HPMC) 4000 cps were found to show a good initial drug release of 21% in the first hour and extended the release upto 16 h. Matrix tablets containing 20% HPMC 4000 cps and 10% HPMC 15000 cps showed a first hour release of 18% and extended the release upto 20 h. Mathematical analysis of the release kinetics indicated that the nature of drug release from the matrix tablets followed non-Fickian or anomalous release. No incompatibility was observed between the drug and excipients used in the formulation of matrix tablets. The developed controlled release matrix tablets of zidovudine, with good initial release (17-25% in first hour) and which extend the release upto 16-20 h, can overcome the disadvantages of conventional tablets of zidovudine.     

Electrochemical behavior and voltammetric determination of norfloxacin at glassy carbon electrode modified with multi walled carbon nanotubes/Nafion

A simple and rapid electrochemical method is developed for the determination of trace-level norfloxacin, based on the excellent properties of multi-walled carbon nanotubes (MWCNTs). The MWCNTs/Nafion film-coated glassy carbon electrode (GCE) is constructed and the electrochemical behavior of norfloxacin at the electrode is investigated in detail. The results indicate that MWCNTs modified glassy carbon electrode exhibited efficiently electrocatalytic oxidation for norfloxacin (NFX) with relatively high sensitivity, stability and life time. Under conditions of cyclic voltammetry, the current for oxidation of selected analyte is enhanced significantly in comparison to the bare GCE. The electrocatalytic behavior is further exploited as a sensitive detection scheme for the analyte determinations by linear sweep voltammetry (LSV). Under optimized condition in voltammetric method the concentration calibration range and detection limit (S/N=3) are 0.1-100 micromol/L and 5 x 10(-8)mol/L for NFX. The proposed method was successfully applied to NFX determination in tablets. The analytical performance of this sensor has been evaluated for detection of the analyte in urine as a real sample.     

Bilayer tablets of atorvastatin calcium and nicotinic acid: formulation and evaluation

The objective of the study is to formulate bilayer tablets consisting of atorvastatin calcium (AT) as an immediate release layer and nicotinic acid (NA) as an extended release layer. The immediate release layer was prepared using super disintegrant croscarmellose sodium and extended release layer using hydroxypropylmethyl cellulose (HPMC K100M). Both the matrix and bilayer tablets were evaluated for hardness, friability, weight variation, thickness, and drug content uniformity and subjected to in vitro drug release studies. The amount of AT and NA released at different time intervals were estimated by HPLC method. The bilayer tablets showed no significant change either in physical appearance, drug content or in dissolution pattern after storing at 40 degrees C/75% relative humiding (RH) for 3 months. The release of the drug from the tablet was influenced by the polymer content and it was much evident from thermogravimetry/differential thermal analysis (TG/DTA) analysis. The results indicated that the bilayer tablets could be a potential dosage form for delivering AT and NA.     

Eudragit NE30D based metformin/gliclazide extended release tablets: formulation,characterisation and in vitro release studies

Metformin/Gliclazide extended release tablets were formulated with Eudragit NE30D by wet granulation technique. Two batches were prepared in order to study influence of drug polymer ratio on the tablet formation and in vitro drug release. The formulated tablets were characterized by disintegration time, hardness, friability, thickness, weight variation, and in vitro drug release. The percentage of polymer, with respect to Metformin/Gliclazide, required to produce tablets with acceptable qualities was 9 to 13.45. The percentage of polymer below this range released the drug immediately and above this range produced granules not suitable for tablet formation. The quantity of Metformin/Gliclazide present in the tablets and the release medium were estimated by a validated HPLC method. The formulated tablets had acceptable physicochemical characters and released the drug over 6-8 h. The data obtained from in vitro release studies were fitted with various kinetic models and was found to follow Higuchi kinetics.     

Preparation of Losartan Potassium Controlled Release Matrices and In-Vitro Investigation Using Rate Controlling Agents

Controlled release matrices have predictable drug release kinetics, provide drugs for an extended period of time, and reduce dosing frequency with improved patient compliance as compared with conventional tablet dosage forms. In the current research work, losartan potassium controlled release matrix tablets were fabricated and prepared with rate altering agents; that is, Ethocel grade 100 combined with Carbopol 934PNF. Various drug to polymer ratios were used. HPMC, CMC, and starch were incorporated in some of the matrices by replacing some amount of filler (5%). The direct compression method was adopted for the preparation of matrices. In phosphate buffer (pH 6.8), the dissolution study was conducted by adopting the USP method-I as the specified method. Drug release kinetics was determined and dissolution profiles were also compared with the reference standard. Prolonged release was observed for all matrices, but those with Ethocel 100FP Premium showed more extended release. The co-excipient (HPMC, CMC, and starch) exhibited enhancement in the drug release rates, while all controlled release matrices released the drug by anamolous non-Fickian diffusion mechanism. This combination of polymers (Ethocel grade 100 with Carbopol 934PNF) efficiently extended the drug release rates up to 24 h. It is suggested that these matrix tablets can be given in once a day dosage, which might improve patient compliance, and the polymeric blend of Ethocel grade 100 with Carbopol 934PNF might be used in the development of prolonged release matrices of other water-soluble drugs.     

Hydroxypropyl methylcellulose based cephalexin extended release tablets: influence of tablet formulation,hardness and storage on in vitro release kinetics

The object of this study was to develop hydroxypropyl methylcellulose (HPMC) based cephalexin extended release tablet, which can release the drug for six hours in predetermined rate. Twenty-one batches of cephalexin tablets were prepared by changing various physical and chemical parameters, in order to get required theoretical release profile. The influences of HPMC, microcrystalline cellulose powder (MCCP), granulation technique, wetting agent and tablet hardness on cephalexin release from HPMC based extended release tablets were studied. The formulated tablets were also characterized by physical and chemical parameters. The dissolution results showed that a higher amount of HPMC in tablet composition resulted in reduced drug release. Addition of MCCP resulted in faster drug release. Tablets prepared by dry granulation was released the drug slowly than the same prepared with a wet granulation technique. Addition of wetting agent in the tablets prepared with dry granulation technique showed slower release. An increase in tablet hardness resulted in faster drug release. Tablets prepared with a wet granulation technique and having a composition of 9.3% w/w HPMC with a hardness of 10-12 kg/cm(2) gave predicted release for 6 h. The in vitro release data was well fit in to Higuchi and Korsmeyer-Peppas model. Physical and chemical parameters of all formulated tablets were within acceptable limits. One batch among formulated twenty-one batches was successful and showed required theoretical release. The effect of storage on in vitro release and physicochemical parameters of successful batch was studied and was found to be in acceptable limits.     

有序介孔锰氧化物催化过氧化氢降解水中诺氟沙星

采用硬模板法制备了有序介孔氧化锰,并用过氧化氢氧化诺氟沙星的降解率及其抗菌活性变化评价了其催化活性.研究发现,有序介孔锰氧化物表现出较高的催化活性;低pH有利于提高其催化活性.与单独过氧化氢氧化过程相比,有序介孔锰氧化物的存在明显减弱了诺氟沙星的抗菌活性.叔丁醇对催化体系的抑制作用表明有序介孔锰氧化物促进了过氧化氢分解生成羟基自由基.通过对诺氟沙星在催化过程中的分解产物鉴定,提出了可能的分解途径.     

Preparation and Characterization of Controlled-Release Floating Bilayer Tablets of Esomeprazole and Clarithromycin

Controlled-release effervescent floating bilayer tablets reduce dosage frequency and improve patient compliance with enhanced therapeutic outcomes. Generally, two different tablets of clarithromycin and esomeprazole, respectively, are given for the treatment of Helicobacter pylori infection and it might be worth incorporating both in a single tablet. In the current study, controlled-release floating bilayer tablets of clarithromycin and esomeprazole (F1–F4) were developed with different rates of polymeric materials by a direct compression method. During the formulation, Fourier-transform infrared spectroscopy (FTIR) analysis was performed for possible interactions between drugs and excipients. No interactions between drugs and excipients were noted. Moreover, the bilayer tablets’ thickness, diameter, friability, hardness, weight variation, dissolution, and percent purity were found within the acceptable limits. The floating lag time and total floating time of all formulations were found to be < 25 s and 24 h, respectively. The release of both the clarithromycin and esomeprazole started at the same time from the controlled-release floating bilayer tablets by anomalous non-Fickian diffusion, and the polymeric materials extended the drug release rate up to 24 h. In the case of F1, the results approached ideal zero-order kinetics. The dissolution profiles of the tested and reference tablet formulations were compared, but no significant differences were observed. It can be concluded that such controlled-release effervescent floating bilayer tablets can be efficiently used in clinical practice to reduce dosage frequency and increase patient compliance with continuous drug release for 24 h, which ultimately might enhance therapeutic efficacy.     

A Study on Pharmacokinetic of Norfloxacin by Second Derivation Spectrophotometry

Norfloxacin (NFX) was the third era Pyridopyrimidinic acid antibacterial medicament, which was in common used to cure the infection of uretbra and respiratory tract, gonorrhea, and bacterium enteritis. By metabolizing in body, 60% of NFX in original shape were excreted in urine, so Pharmacokinetic of NFX was studied by determining concentration of NFX in urine. Till now, the methods of determining concentration of NFX in urine, such as fluorescence Spectrophotometry (with blank urine as antitheses^[1]), HPLC^[2] and microorganism^[3] had been adopted, whose operation was numerous and trivial.     

Derivative spectrophotometric analysis of 4-quinolone antibacterials in formulations and spiked biological fluids by their Cu(II) complexes

A derivative UV-spectrophotometric analytical procedure was developed for determination of three 4-quinolone antibacterials: norfloxacin (NFX), ciprofloxacin (CFX), and sparfloxacin (SFX). The method depends on the complexation of Cu(II) with the studied compounds in aqueous medium. A third order, measurement was applied for their quantification. A linear correlation was established between the amplitude of the peak and concentration for all the studied drugs in the range of 15-80, 35-120, and 200-700 ng/mL, with minimum detectability (S/N = 2) of 1.0, 1.3, and 5.1 ng/mL for NFX, CFX, and SFX, respectively. The method was successfully applied for accurate, sensitive, and selective determination of the studied drugs in bulk and tablets formulation with average percentage recoveries of 99.22 +/- 0.55 to 100.33 +/- 1.60. The results obtained were favorably compared with those of the reference method. The method was also used to determine sparfloxacin in spiked human plasma and urine. The results obtained were satisfactory, accurate, and precise.     

Development of extended release coevaporates and coprecipitates of promethazine HCl with acrylic polymers: formulation considerations

The present investigation studied a novel extended release system of promethazine hydrochloride (PHC) with acrylic polymers Eudragit RLPO and Eudragit RS100 in different weight ratios (1 : 1 and 1 : 5) using coevaporation and coprecipitation techniques. Solid dispersions were characterized by Fourier-transformed infrared spectroscopy (FT-IR), Differential scanning calorimetry (DSC), Powder X-ray diffractometry (PXRD), Nuclear magnetic resonance (NMR), Scanning electron microscopy (SEM) as well as solubility and in vitro dissolution studies in 0.1 n HCl (pH 1.2), double distilled water and phosphate buffer (pH 7.4). Adsorption test from drug solution to solid polymers were also performed. Selected solid dispersion system was subjected to direct compression and compressed tablets were evaluated for in vitro dissolution studies. The progressive disappearance of drug peaks in thermotropic profiles of coevaporates were related to increasing amount of polymers while SEM studies suggested homogenous dispersion of drug in polymer. Eudragit RLPO had a greater adsorptive capacity than Eudragit RS100 and thus its coevaporates in 1 : 5 ratio exhibited higher dissolution rate with 91.90% drug release for 12 h. Among different formulations, tablets prepared by Eudragit RLPO coevaporates (1 : 5) displayed extended release of drug for 12 h with 90.87% release followed by zero order kinetics (r(2)=0.9808).     

The role of polymer/drug interactions on the sustained release from poly(dl-lactic acid) tablets

The release profiles of model drugs (propranolol HCl, diclofenac sodium, salicylic acid and sulfasalazine) from low molecular weight poly(d,l-lactic acid) [d,l-PLA] tablets immersed in buffer solutions were investigated in an attempt to explore the mechanism of the related phenomena. It was confirmed that drug release is controlled by diffusion through the polymer matrix and by the erosion of the polymer. The pH of the surrounding medium influences the drug solubility as well as swelling and degradation rate of the polymer and therefore the overall drug release process. Physicochemical interaction between d,l-PLA and drug is an additional factor which influences the degree of matrix swelling and therefore its porosity and diffusion release process. Propranolol HCl shows extended delivery time at both examined pH values (5.4 and 7.4) and especially at pH 7.4 where release was accomplished in 190 days, most probably due to its decreased solubility at higher pH values. The acidic drugs gave shorter delivery times especially at pH 7.4. A slower drug release rate and more extended delivery time at pH 7.4 in comparison with that at pH 5.4 was recorded for tablets loaded with diclofenac sodium and salicylic acid. The opposite effect was observed with samples loaded with propranolol HCl.     

Solid-phase extraction using a molecularly imprinted polymer for the selective purification and preconcentration of norfloxacin from seawater

Abstract

A highly selective and effective method for the purification and preconcentration of norfloxacin (NFX) in seawater samples was developed based on molecularly imprinted solid-phase extraction (MISPE). The molecularly imprinted polymer was synthesized by precipitation polymerization. Methacrylic acid (MAA) and ethylene glycol dimethacrylate (EGDMA) were used as the functional monomer and crosslinker, respectively. The resulting molecularly imprinted polymer (MIP) showed high adsorption for NFX and was selective for its solid-phase extraction. An offline MISPE method followed by high performance liquid chromatography with diode array detection was established for the determination of NFX in seawater. The recoveries of spiked seawater samples using the MISPE columns were satisfactorily higher than 77.6%. The relative standard deviation was less than 5.60%, and the limit of detection was 0.027?μg L^?1. Four seawater samples obtained from the Bohai Sea were analyzed, and NFX was found only at one location at a concentration of 0.280?μg L^?1.     

Study on the inclusion interaction of p-sulfonatocalix[n]arenes with norfloxacin

The inclusion complexes of norfloxacin (NFX) with p-sulfonatocalix[n]arenes (SCXn) were studied. The characteristics of host–guest (HG) complexation between p-sulfonatocalix[n]arenes with NFX were investigated by fluorescence spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, fourier transform infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC). Stoichiometry and association constants (K) of the inclusion complexes were determined by the non-linear fitting method. An interesting 1:1 stochiometric of HG complexes were formed at different pH values (pH = 3.00, 6.00, 8.00) The inclusion mode of NFX with p-sulfonatocalix[n]arenes was confirmed by NMR spectroscopy.     

Relationship between diffusivity of water molecules inside hydrating tablets and their drug release behavior elucidated by magnetic resonance imaging

We reported previously that sustained release matrix tablets showed zero-order drug release without being affected by pH change. To understand drug release mechanisms more fully, we monitored the swelling and erosion of hydrating tablets using magnetic resonance imaging (MRI). Three different types of tablets comprised of polyion complex-forming materials and a hydroxypropyl methylcellulose (HPMC) were used. Proton density- and diffusion-weighted images of the hydrating tablets were acquired at intervals. Furthermore, apparent self-diffusion coefficient maps were generated from diffusion-weighted imaging to evaluate the state of hydrating tablets. Our findings indicated that water penetration into polyion complex tablets was faster than that into HPMC matrix tablets. In polyion complex tablets, water molecules were dispersed homogeneously and their diffusivity was relatively high, whereas in HPMC matrix tablets, water molecule movement was tightly restricted within the gel. An optimal tablet formulation determined in a previous study had water molecule penetration and diffusivity properties that appeared intermediate to those of polyion complex and HPMC matrix tablets; water molecules were capable of penetrating throughout the tablets and relatively high diffusivity was similar to that in the polyion complex tablet, whereas like the HPMC matrix tablet, it was well swollen. This study succeeded in characterizing the tablet hydration process. MRI provides profound insight into the state of water molecules in hydrating tablets; thus, it is a useful tool for understanding drug release mechanisms at a molecular level.     

Effects of pH and polarity on the excited states of norfloxacin and its 4′-N-acetyl derivative:a steady-state and time-resolved study

The properties of norfloxacin (NFX) and its 4′-N-acetyl derivative (ANFX) are investigated in different pH aqueous solutions and H₂O-CH₃CN mixed solutions, to determine the effects of pH and polarity on their ground and excited states. The triplet states of NFX and ANFX are affected more by pH than by polarity. The pH dependence of the NFX and ANFX triplet states is likely due to the different quantum yields of different protonated forms. Steady-state fluorescence, time-resolved fluorescence, and laser flash photolysis experiments at different pH values provide clear evidence of the involvement of different intramolecular charge-transfer pathways in the singlet states of NFX and ANFX. The different electron-donating capacities of 1-N, 1′-N, and 4′-N under different conditions determine the major pathway.     

Triplet excited fluoroquinolones as mediators for thymine cyclobutane dimer formation in DNA

A series of fluoroquinolones (FQs), including enoxacin (ENX), pefloxacin (PFX), norfloxacin (NFX), its N(4')-acetyl derivative (ANFX), ofloxacin (OFX), and rufloxacin (RFX) have been investigated to determine their potential as DNA photosensitizers via thymine cyclobutane dimer (T<>T) formation in DNA. At fluoroquinolone concentrations and light doses insufficient to produce direct single strand breaks, ENX, PFX, and NFX were able to produce T<>T dimers in DNA, revealed by enzymatic treatment with T4 endonuclease V. By contrast, ANFX, OFX, and RFX were inefficient in this assay. The absolute values of the triplet energies of ENX, PFX, NFX, ANFX, OFX, and RFX were estimated by means of laser flash photolysis, using flurbiprofen, 4-biphenylcarboxylic acid, and naproxen as energy acceptors. They were found to be 273, 269, 269, 265, 262, and 253 kJ/mol, respectively. Other triplet excited state properties of the FQs, including quantum yields and lifetimes, were also studied. All the results indicate that the threshold ET value required for a given compound to become a potential DNA photosensitizer via T<>T formation is in the range defined by the triplet energies of NFX and ANFX (265-269 kJ/mol). This provides the basis for an alert rule: any chemical (drugs, cosmetics, pesticides, etc.) with higher ET has to be considered with regard to its potential photogenotoxicity.     

Triplet excimers of fluoroquinolones in aqueous media

Generation of triplet eximers of 6-fluoro-7-piperazinyl-quinolone-3-carboxylic acids (FQs) have been detected in aqueous media using laser flash photolysis (LFP). These transient species (SS) are generated by self-quenching reactions of FQ triplet excited states such as pefloxacin (PFX), norfloxacin (NFX), the N-acetylated form of NFX (ANFX), and its methyl ester (EANFX) with their ground states. In this context, self-quenching rate constants in the range of (1-7) × 10(8) M(-1) s(-1) were determined. The triplet excimers show transient absorption spectra with λ(max) ca. 710 nm for SS(NFX), 740 nm for SS(PFX), and 620 nm for SS(ANFX) and E(ANFX), which are red-shifted with respect to their predecessors triplet excited states. These excimers can be also observed in the presence of phosphate buffer (PB). Experiments performed with NFX and ANFX at different PB concentrations showed that deprotonation processes are not involved in the generation of SS. The triplet multiplicity of the FQ excimers was confirmed by energy transfer reactions with naproxen. The correlation between fluorescence, intersystem crossing, excimer and photodegradation quantum yields of (A)NFX indicated that FQ self-quenching reactions are mainly a deactivation pathway. On the other hand, generation of FQ radical anions absorbing at λ(max) ca. 620 nm has been observed by an efficient electron transfer reaction from Trp to NFX, PFX, and ANFX (rate constants ca. 1 × 10(9) M(-1) s(-1)).     

hGH release from directly compressed hGH-PLGA biodegradable implantable tablets: Influence of physicomechanical factors

The incidence of compression conditions, porosity and polymer degradation on human growth hormone (hGH) release from PLGA implantable tablets was evaluated with the aim of gaining insight in the mechanism involved in drug delivery from biodegradable matrices. Tablets elaborated by direct compression of hGH with PLGA, applying various compression forces for different times, kept the integrity and the stability of the hormone. Tablet dimensions, viscoelastic properties, glass to rubber transition temperature (T_g), PLGA degradation rate and water uptake were analyzed in the freshly prepared implantable tablets as well as at several times during release test in phosphate buffer pH 7.4. Placebo tablets were also prepared to evaluate the incidence of hGH on the physicomechanical properties of the device and PLGA degradation rate. Porosity remarkably determined the amount of hGH released, through an effect on the easiness of water penetration in the tablet and on the beginning of PLGA degradation. The decrease in PLGA molecular weight during the first days in the release medium, despite of being minor, significantly conditioned hGH release rate. The more dramatic changes in PLGA molecular weight observed after 20 days in the release medium notably reduced the T_g and the viscous and elastic moduli of the tablets. The overall analysis of the events underwent by the tablets in contact with the aqueous medium was used to explain the drug release profile and may help to optimize the design of the PLGA-based implantable tablets as peptidic drug delivery systems.