Comparison of high-performance liquid chromatography separation of red wine anthocyanins on a mixed-mode ion-exchange reversed-phase and on a reversed-phase column

Anthocyanins, which confer the characteristic color to red wine, can be used as markers to classify wines according to the grape variety. It is a complex separation that requires very high chromatographic efficiency, especially in the case of aged red wines, due to the formation of pyranoanthocyanins. A coelution between these kinds of compounds can affect the R_ac/coum ratio of aged wines, and might lead to false results when classifying the wine variety. In 2007, the use of a novel mixed-mode ion-exchange reversed-phase column was reported to separate anthocyanins extracted from grapes of Vitis labrusca with different selectivity than C-18 columns. In the present work, the separation of anthocyanins including pyranoanthocyanins in young and aged Cabernet Sauvignon wines and other varieties is evaluated. The most interesting contributions of this research are the different elution order and selectivity obtained for anthocyanins and pyranoanthocyanins (only formed in wine), compared with those observed in C-18 stationary phases. Also interesting is the separation of the polymeric fraction, which elutes as a clearly separated peak at the chromatogram's end. However, a comparison with a high efficiency C-18 column with the same dimensions and particle size demonstrated that the tested mixed-mode column shows broader peaks with a theoretical plate number below 8000, for malvidin-3-glucoside peak, while it can be up to 10 times higher for a high efficiency C-18 column, depending on the column manufacturer. Under the tested conditions, in mixed-mode phase, the analysis time is almost twice that of a C-18 column with the same dimensions and particle size. A mixed-mode phase with increased efficiency should provide an interesting perspective for separation of anthocyanins in wine, due to its improved selectivity, combined with a useful role in a second-dimension separation in preparative anthocyanin chromatography.     

A method for characterization and optimization of reversed-phase liquid chromatographic separations based on the retention behaviour in homologous series

Summary A method based on the use of the members of homologous series as the calibration standards is suggested for prediction of retention in reversed-phase liquid chromatography. The method respects the dependence of retention on the composition of the mobile phase and makes possible distinguishing between the contributions of non-specific (hydrophobic) and specific (polar) interactions to the retention. The selection of calibration homologous series is described, the method is verified for a number of compounds and compared to the calculations based on the model of interaction indexes. The method suggested can be used for prediction of retention in mobile phases with different compositions and for the optimization of separation conditions. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

Separation of positional isomers of mono-poly(ethylene glycol)-modified octreotides by reversed-phase high-performance liquid chromatography

The purpose of this study was to develop a reversed-phase high-performance liquid chromatographic method (RP-HPLC) for separating each positional isomer from low- to high-molecular-weight mono-PEGylated octreotides prepared by polyethylene glycol (PEG) derivatives with various molecular weights (2, 5, or 20 kDa). In the gradient elution using acetonitrile and 10 mM phosphate buffer at pH 7.0 on a Phenomenex Gemini C-18 column (250 mm × 4.6 mm id, 5 μm), each positional isomer of the mono-PEGylated octreotides was completely resolved with good resolution (PEG-2K: 7.6, PEG-5K: 6.6, and PEG-20K: 3.1). The optimal RP-HPLC condition also resolved the degradation products of mono-PEG-octreotide isomers in thermal stability studies at 55 °C and enzymatic stability studies with trypsin. In conclusion, the developed RP-HPLC method will be valuable for studying the effect of PEGylation site and the attached PEG size on the physicochemical and pharmacological properties of PEGylated octreotides.     

Porous glassy carbon,a new columns packing material for gas chromatography and high-performance liquid chromatography

Summary A new carbon for liquid and gas chromatography, called porous glassy carbon (PGC) is described. The material is made using a porous template filled with carbonizable resin. After firing in an inert atmosphere the template is removed. PGC has been made with surface area ranging from 20 m²/g to 400 m²/g. It is of adequate strength for gas and high-performance liquid chromatography. In gas chromatography it is similar to the commerical graphitized thermal carbon black (GTCB) Carbopack B, but has somewhat less retention per unit surface area and is much more robust. It gives symmetrical peaks for hydrocarbons with k-values up to at least 100. In liquid chromatography it is similar to the GTCB's coated with pyrolytic carbon described by Guiochon. It behaves as a strong reversed phase adsorbent. Fairly good peak symmetry is maintained for k-values up to at least 10 but trace additives to the eluent may be necessary to control peak asymmetry. PGC has considerable potential as a new packing material in both gas and liquid chromatography.Presented at the 14th International Symposium on Chromatography London, September, 1982     

Evaluation of dead time calculation in liquid chromatography using a linearization procedure for homologous series

A mathematical method for the calculation of the dead time (t_m) in HPLC was evaluated using a computer simulation approach, in which artificial perturbations were introduced to Simulated homolog retention times. The calculation was based on a modified and extended Grobler and Bálisz (GB) method. Investigated wav how the precision of the calculated t_M is affected by: statistical fluctuations in retention times and which, and how many homolog retention times are used. Based on these simulations a two-step procedure for the t_M calculation is proposed: In the first step the linearity of log t_{R, n} vs carbon number n is checked using as many homolog retention times as possible. The slope value b^o of the first linear regression in the GB method is used for the selection of homolog retention times in the final t_M calculation. In the second step the optimal selection of homologs is made and the final t_M calculation is carried out. Guidelines for homolog selection are given.     

An investigation of 3μm reverse-phase octadecylsilane packing materials for high-performance liquid chromatography

Summary The efficiency of high-performance liquid chromatography columns packed with 5 m and 3 m reverse-phase octadecylsilane packing materials has been evaluated using four test mixtures. Both stopped flow and valve injection have been used and typical efficiencies are given.     

Alpha 1-acid glycoprotein high-performance liquid chromatography column (EnantioPAC) as a screening tool for protein binding

An attempt was made to correlate retention behavior on a high-performance liquid chromatographic (HPLC) system employing an immobilized alpha 1-acid glycoprotein (AAG) column with AAG binding behavior for various compounds. Protein binding was assessed by propranolol displacement studies in an equilibrium dialysis system using isolated AAG. HPLC retention behavior poorly correlated with propranolol displacement from AAG. This system is not suitable for use as a screening tool for AAG affinity.     

Complexation behavior of mono- and disaccharides by the vinylbenzeneboronic acid–divinylbenzene copolymer resins packed in a high-performance liquid chromatographic column

Using an HPLC column packed with monodispersed vinylbenzeneboronic acid–divinylbenzene (V–D) copolymer resins, the elution behaviors of the mono- and disaccharides were studied under different pH mobile phases. The monodispersed V–D copolymer resins were prepared by the copolymerization of 4-vinylbenzeneboronic acid and divinylbenzene in the presence of template silica gel particles (particle size: 5 μm; pore size: 10 nm), followed by dissolution of the template silica gel using a NaOH solution. Similarly, styrene–divinylbenzene (S–D) copolymer resins as the control resins were also synthesized. The transmission electron micrographs of these polymer resins revealed a good monodispersity. The complexation behavior of the saccharides was evaluated by comparison of the peak area eluted through the V–D column for that through the S–D column. Four aldopentoses (d-ribose, d-arabinose, d-xylose, and d-lyxose) and four aldohexoses (d-glucose, d-mannose, d-galactose, and d-talose) were retained completely at pH 11.9. Especially, ribose and talose were totally retained even under acidic and neutral conditions. For the disaccharides, unlike sucrose and maltose, palatinose was completely retained in basic mobile phases.     

Reversed-phase chiral HPLC and LC/MS analysis with tris(chloromethylphenylcarbamate) derivatives of cellulose and amylose as chiral stationary phases

Three polysaccharide-derived chiral stationary phases (CSP) were evaluated for the resolution of more than 200 racemic compounds of pharmaceutical interest in the reversed-phase (RP) separation mode. The population of test probes was carefully evaluated in order to insure that it covers as completely as possible all structural diversity of chiral pharmaceuticals. RP showed the highest potential for successful chiral resolution in HPLC and LC/MS analysis when compared to normal phase and polar organic separation modes. Method development consisted of optimizing mobile phase eluting strength, nature of organic modifier, nature of additive and column temperature. The newer CSPs, cellulose tris(3-chloro-4-methylphenylcarbamate) and amylose tris(2-chloro-5-methylphenylcarbamate), were compared to the commonly used cellulose tris(3,5-dimethylphenylcarbamate) in regards to their ability to provide baseline resolution. Comparable success rates were observed for these three CSPs of quite complimentary chiral recognition ability. The same method development strategy was evaluated for LC/MS analysis. Diethylamine as additive had a negative effect on analyte response with positive ion mode electrospray (ESI⁺) MS(/MS) detection, even at very low concentration levels (e.g., 0.025%). Decreasing the organic modifier (acetonitrile or methanol) content in the mobile phase often improved enantioselectivity. The column temperature had only a limited effect on chiral resolution, and this effect was compound dependent. Ammonium hydrogencarbonate was the preferred buffer salt for chiral LC with ESI⁺ MS detection for the successful separation and detection of most basic pharmaceutical racemic compounds. Ammonium acetate is a viable alternative to ammonium hydrogencarbonate. Aqueous formic acid with acetonitrile or methanol can be successfully used in the separation of acidic and neutral racemates. Cellulose tris(3-chloro-4-methylphenylcarbamate) and amylose tris(2-chloro-5-methylphenylcarbamate) emerge as CSPs of wide applicability in either commonly used separation modes rivaling such well established CSPs as cellulose tris(3,5-dimethylphenylcarbamate). Screening protocols including these two new CSPs in the preferentially screened set of chiral columns have higher success rates in achieving baseline resolution in shorter screening time.     

Synthesis, self-assembling properties, and atom transfer radical polymerization of an alkylated L-phenylalanine-derived monomeric organogel from silica: a new approach to prepare packing materials for high-performance liquid chromatography

The monomer N'-octadecyl-N(alpha)-(4-vinyl)-benzoyl-L-phenylalanineamide (4) based on L-phenylalanine has been simply but effectively synthesized, and its self-assembling properties have been investigated. FTIR and a variable-temperature (1)H NMR spectroscopic investigation demonstrated that the aggregation of compound 4 in various organic solvents is due to the formation of intermolecular hydrogen bonds among the amide moieties. UV/Vis measurements indicated that the multiple pi-pi interactions of the phenyl groups also contribute to the self-assembly. As was observed by (13)C cross-polarization magic-angle spinning (CP/MAS) NMR and variable-temperature (1)H NMR measurements, the ordered alkyl chains also played an important role in the molecular aggregation by van der Waals interactions. Compound 4 was polymerized by surface-initiated atom transfer radical polymerization from porous silica gel to prepare a packing material for HPLC. The results of thermogravimetric analysis showed that a relatively large amount of polymer was grafted onto the silica surface. The organic phase on silica was in a noncrystalline solid form in which the long alkyl chain exists in a less-ordered gauche conformation. Analysis of chromatographic performance for polyaromatic hydrocarbon samples showed higher selectivity than conventional reversed-phase HPLC packing materials.     

Structure-retention and mobile phase-retention relationships for reversed-phase high-performance liquid chromatography of several hydroxythioxanthone derivatives in binary acetonitrile-water mixtures

The reversed-phase high-performance liquid chromatographic (RP-HPLC) behavior of some newly synthesized hydroxythioxanthone derivatives using binary acetonitrile-water mixtures as mobile phase has been examined. First, the variation in the retention time of each molecule as a function of mobile phase properties was studied by Kamlet-Taft solvatochromic equations. Then, the influences of molecular structure of the hydroxythioxanthone derivatives on their retention time in various mobile phase mixtures were investigated by quantitative structure-property relationship (QSPR) analysis. Finally, a unified model containing both the molecular structure parameters and mobile phase properties was developed to describe the chromatographic behavior of the systems studied. Among the solvent properties, polarity/polarizability parameter (π^*) and hydrogen-bond basicity (β), and among the solute properties, the most positive local charge (MPC), the sum of positive charges on hydrogen atoms contributing in hydrogen bonding (SPCH) and lipophilicity index (log P) were identified as controlling factors in the RP-HPLC behavior of hydroxythioxanthone derivatives in actonitrile-water binary solvents.     

Application of micropellicular poly-styrene/divinylbenzene stationary phases for high-performance reversed-phase liquid chromatography electrospray-mass spectrometry of proteins and peptides

Summary Short columns packed with highly crosslinked 2.3 μm poly-styrene/divinylbenzene (PS/DVB) particles were used for rapid and efficient separation of proteins and peptides by reversed-phase high-performance liquid chromatography at elevated temperatures. Enhancement of the diffusivities of the sample components at elevated temperatures together with the short diffusion pathlength with the micropellicular polymeric stationary phases were responsible for high efficiency, high speed of analysis, and short column regeneration times. Underivatized PS/DVB beads as well as PS/DVB microspheres which have been modified with polyvinylalcohol or octadecyl chains on the surface were synthesized, employed, and compared to HY-TACH-C18, a commercially available micropellicular octadecyl-silica stationary phase, for the separation of proteins, octapeptides and tryptic protein digests. Highest performance was obtained with the silica- and PS/DVB-based octadecyl stationary phases, which exhibited similar column efficiencies but different selectivities for proteins and peptides. The minimum detectability at 214 nm and the maximum loading capacity for ribonuclease A using analytical 30×4.6 mm I.D. columns were 10 ng (0.6 pmol) and 1 μg, respectively. Finally, reversed-phase HPLC with a 60×2 mm I.D. narrow-bore column packed with micropellicular octadecyl PS/DVB was coupled successfully to electrospray mass spectrometry at a flow-rate of 0.15 mL min⁻¹ and on-line full-scan mass spectra for molecular mass determination and identification of proteins in the lower picomol range were obtained.     

Selectivity comparisons of monolithic silica capillary columns modified with poly(octadecyl methacrylate) and octadecyl moieties for halogenated compounds in reversed-phase liquid chromatography

Stationary phase selectivities for halogenated compounds in reversed-phase HPLC were compared using C18 monolithic silica capillary columns modified with poly(octadecyl methacrylate) (ODM) and octadecyl moieties (ODS). The preferential retention of halogenated benzenes on ODM was observed in methanol/water and acetonitrile/water mobile phases. In selectivity comparison of selected analytes on ODM and ODS, greater selectivities for halogenated compounds were obtained with respect to alkylbenzenes on an ODM column, while similar selectivities were observed with a homologous series of alkylbenzenes on ODM and ODS columns. These data can be explained by greater dispersive interactions by more densely packed octadecyl groups on the ODM polymer coated column together with the contribution of carbonyl groups in ODM side chains. For the positional isomeric separation of dihalogenated benzenes (ortho-, meta-, para-), the ODM column also provided better separation of these isomers for the adjacently eluted isomers that cannot be completely separated on an ODS column in the same mobile phase. These results imply that the ODM column can be used as a better alternative to the ODS column for the separation of other halogenated compounds.     

Simultaneous determination of metacavir and its metabolites in rat plasma using high-performance liquid chromatography with tandem mass spectrometric detection (LC-MS/MS)

A sensitive and selective liquid chromatography–tandem mass spectrometry (LC‐MS/MS) method for the simultaneous determination of metacavir and its two metabolites in rat plasma was developed and validated. Tinidazole was used as an internal standard and plasma samples were pretreated with one‐step liquid–liquid extraction. In addition, these analytes were separated using an isocratic mobile phase on a reverse‐phase C₁₈ column and analyzed by MS in the selected reaction monitoring mode. The monitored precursor to product‐ion transitions for metacavir, 2′,3′‐dideoxyguanosine, O‐methylguanine and the internal standard were m/z 266.0 → 166.0, m/z 252.0 → 152.0, m/z 166.0 → 149.0 and m/z 248.0 → 202.0, respectively. The standard curves were found to be linear in the range of 1–1000 ng/mL for metacavir, 5–5000 ng/mL for 2′,3′‐dideoxyguanosine and 1–1000 ng/mL for O‐methylguanine in rat plasma. The precision and accuracy for both within‐ and between‐batch determination of all analytes ranged from 2.83 to 9.19% and from 95.86 to 111.27%, respectively. No significant matrix effect was observed. This developed method was successfully applied to an in vivo pharmacokinetic study after a single intravenous dose of 20 mg/kg metacavir in rats. Copyright © 2011 John Wiley & Sons, Ltd.     

Unusually high enantioselectivity in high-performance liquid chromatography using cellulose tris(4-methylbenzoate) as a chiral stationary phase

The cellulose tris(4-methylbenzoate) chiral stationary phase (CSP) (commercially known as Chiralcel OJ-H) exhibited an extremely high enantioselectivity when used in the HPLC resolution of N-thiocarbamoyl-3-(4′-prenyloxy)-phenyl-5-phenyl-4,5-dihydro-(1H) pyrazole (Compound 1), in both normal-phase and polar organic conditions. Using n-hexane–ethanol (80:20, v/v) as a mobile phase, an enantioseparation factor value of 138.5 was found. In order to modulate the elution time of the longer retained enantiomer, a simple HPLC procedure was developed. The optimized analytical protocol was based on the stopped flow technique and did not involve any change in mobile phase composition. The stronger interaction energy of the (S) enantiomer compared to that of the (R) enantiomer was mainly attributed to the formation of a hydrogen bonding between the amino group of the thiocarbamoyl moiety and the carbonyl oxygen of the CSP.     

Monodisperse polymer beads as packing material for high-performance liquid chromatography. Preparation of macroporous poly(2,3-epoxypropyl vinylbenzyl ether-co-divinylbenzene) beads,their properties,and application to HPLC separations

In search for HPLC separation media with new surface chemistries, a styrene-based monomer, 2,3-epoxypropyl vinylbenzyl ether, containing reactive epoxide groups has been syn-thesized and copolymerized with divinylbenzene in a suspension polymerization. The process involves the use of size monodisperse particles that are swollen with monomer and then polymerized in the presence of a porogenic diluent consisting of a mixture of 4-methyl-2-pentanol and octane. The effect of concentration of divinylbenzene on the pore size dis-tribution and the specific surface area of the resulting uniformly sized porous poly(2,3-epoxypropyl vinylbenzyl ether-co-divinylbenzene) beads has been studied. The epoxide groups of the copolymer have been hydrolyzed and the beads used for reversed-phase chro-matography of both small molecules and proteins to show the effect of hydrophobicity of the matrix on the separation properties. Reversed-phase chromatography of alkylbenzenes follows the expected pattern while for proteins the hydrolyzed beads with the highest content of the crosslinking monomer exhibit a remarkable deviation from the predicted retention characteristics. © 1995 John Wiley & Sons, Inc.     

Simultaneous determination of 15 marker constituents in various radix Astragali preparations by solid-phase extraction and high-performance liquid chromatography

An improved quality control method was developed to simultaneously determine 15 major constituents (eight flavonoids and seven saponins) in various radix Astragali preparations, using SPE for pretreatment of samples, HPLC with diode-array and evaporative light scattering detectors (DAD-ELSD) for quantification in one run, and HPLC-ESI-TOF/MS for definite identification of compounds in preparations. Optimum separations were obtained with a ZORBAX C(18) column, using a gradient elution with 0.3% aqueous formic acid and ACN. This established method was fully validated with respect to linearity, precision, repeatability, and accuracy, and was successfully applied to quantify the 15 compounds in 19 commercial samples, including 3 dosage forms, i. e., oral solution, injection, concentrated granule, and its processed products of radix Astragali. The results demonstrated that many factors might result in significant differences in quality of the final preparations, including crude drugs, pretreatment processes, manufacturing procedure, storage conditions, etc. Then the developed method provided a reasonable and powerful manner to ensure the efficacy, safety, and batch-to-batch uniformity of radix Astragali products by standardizing each procedure, and thus should be proposed as quality control for the clinical use and modernization of herbal preparations.