Synthesis of highly stable silver nanoparticles by photoreduction and their size fractionation by phase transfer method

In this report we demonstrate a green chemical approach for the synthesis of stable silver nanoparticles in aqueous medium using tyrosine as an efficient photoreducing agent. A narrow size distribution of silver nanoparticles can be achieved by this simple photoirradiation method without using any additional stabilizing agents or surfactants. Two different irradiation sources have been explored resulting in a different particle size distribution pattern in each case. Further, we show that starting from a polydisperse tyrosine synthesized silver nanoparticles sample, it is also possible to fractionate them into different size ranges. The size fractionation was achieved by a 2 stage phase transfer method employing different organic solvents. The nanoparticles synthesized were characterized using UV-vis spectroscopy, Transmission electron microscopy (TEM) and X-ray diffraction (XRD) techniques.     

Spontaneous formation of silver nanoparticles in aminosilica

We report a rapid and spontaneous metallization process associated with sol–gel reaction of aminosilane that can be utilized to synthesise silver embedded silica nanocomposite without involving additional reducing agents. The reduction reaction induced by bis[3-(trimethoxysilyl)propyl]ethylenediamine (enTMOS) involves amine functional moieties, which drive the reduction reaction with presence of water. Cyclic voltammetry was used to investigate the redox potential of enTMOS and its relation to chemical environment. It was found that the oxidation potential of enTMOS depending on the amount of water (water:enTMOS (v/v) = 8:1–0:1) ranges from 0.48 to 0.68 V versus Ag/AgCl electrode in methanol. The oxidation potential of aminosilane decreases with water content and becomes more negative than that of Ag, suggesting the aminosilane acts as a silver reducing agent while serving as a matrix to encapsulate silver nanoparticles after reacting with water. This process has been utilized to produce evenly dispersed silver nanoparticles with sizes ranging from 5 to 20 nm in both liquid and solid forms of aminosilane, allowing us to prepare silver nanoparticles doped silica nanocomposite that exhibits enhanced electrochemical properties.     

液相脉冲激光烧蚀法制备高熔点的纳米金属粒子

采用液相脉冲激光烧蚀法成功地制备了高熔点的金属Pt、Ru与Ag纳米粒子. 采用SEM、TEM、ED和紫外-可见吸收光谱表征了纳米粒子的特征. 纳米粒子的粒径基本在数个到数十个纳米的大小范围内. 发现含适量PVP(poly(vinylpyrrolidone))的水溶液有利于纳米粒子的制备, 而且还能够提高纳米粒子悬浮液的稳定性. 该制备方法较简单, 在制备高熔点的纳米金属粒子方面有着其它方法所不能比拟的优势.     

Synthesis of silver nanoparticles using dl-alanine for ESR dosimetry applications

The potential use of alanine for the production of nanoparticles is presented here for the first time. Silver nanoparticles were synthesized using a simple green method, namely the thermal treatment of silver nitrate aqueous solutions with dl-alanine. The latter compound was employed both as a reducing and a capping agent. Particles with average size equal to 7.5 nm, face-centered cubic crystalline structure, narrow size distribution, and spherical shape were obtained. Interaction between the silver ions present on the surface of the nanoparticles and the amine group of the dl-alanine molecule seems to be responsible for reduction of the silver ions and for the stability of the colloid. The bio-hybrid nano-composite was used as an ESR dosimeter. The amount of silver nanoparticles in the nanocomposite was not sufficient to cause considerable loss of tissue equivalency. Moreover, the samples containing nanoparticles presented increased sensitivity and reduced energetic dependence as compared with pure dl-alanine, contributing to the construction of small-sized dosimeters.     

Colloidal silver nanoparticles stabilized by a water-soluble triosmium cluster

Silver nanoparticles stabilized by the water soluble triosmium cluster Os₃(μ-H)(CO)₁₀S(CH₂)₁₀COO]Na were prepared by both photochemical and chemical reduction of silver nitrate. The silver nanoparticles were characterized by UV-Vis spectroscopy and high resolution TEM. The particles obtained by chemical reduction showed remarkable stability.     

Size-controlled synthesis of highly water-soluble silver nanocrystals

We describe a modified polyol process for the synthesis of silver nanocrystals with uniform sizes ranging from several nanometers to 20 nm. The use of polyacrylic acid, in place of polyvinylpyrrolidone in the conventional polyol process, significantly limits the growth of silver nanocrystals, prevents the interparticle aggregation and fusion, and leads to a uniform population of samples with high water solubility. The size of nanocrystals can be conveniently tuned by controlling the reaction time, the concentration and chain length of the polymeric surfactants, and the reaction temperature. Uniform silver nanocrystals within sizes below 20 nm are preferred candidates over larger particles for applications where high density of optical absorption is required, for example, for photothermal conversion in cancer therapy.     

Role of anions for the reduction behavior of silver ions in polymer/silver salt complex membranes

The reduction of silver ions to silver nanoparticles is an essential issue in polymer/silver salt complex membranes for facilitated olefin transport, because it has a critical influence on the long-term stability of membrane performance. In this study, the role of anions for the formation of silver nanoparticles in polymer/silver salt complexes was investigated. This role was assessed for the complexes of poly(N-vinyl pyrrolidone) (PVP) with three silver salts including AgBF₄, AgCF₃SO₃, and AgNO₃. Especially, UV irradiation to the membranes was used to clearly investigate the reduction behavior of silver ions. Separation performance test, UV–vis spectroscopy and transmission electron microscopy (TEM) clearly show that the reduction rate of silver ions strongly depends on the counteranions of salt, and has the following order: AgBF₄ > AgCF₃SO₃ > AgNO₃. This behavior of the formation of silver nanoparticles in polymer/silver salt complex membranes is explained in terms of the interaction strength of silver ions with the carbonyl oxygens of polymer, and that of silver ions with counteranions. It is concluded that when the former interaction is strong and the latter one is weak, the reduction rate of silver ions to silver nanoparticles is fast, and vice versa. These interactions were characterized using FT-IR, FT-Raman spectroscopy, and theoretical ab initio calculation.     

Synthesis and characterization of UV-irradiated silver/montmorillonite nanocomposites

We have successfully developed a simple method for preparing silver nanoparticles (Ag NPs) using UV irradiation of AgNO₃ in the interlamellar space of a montmorillonite (MMT) without any reducing agent or heat treatment. The properties of Ag/MMT nanocomposites were studied as a function of the UV irradiation period. UV irradiation disintegrated the Ag NPs into smaller size until a relatively stable size and size distribution were achieved. The results from UV–vis spectroscopy show that particles size of Ag NPs decrease with the increase of irradiation period. The crystalline structure of Ag NPs was determined by powder X-ray diffraction (PXRD).     

Evaluation of agarose gel electrophoresis for characterization of silver nanoparticles in industrial products

Agarose gel electrophoresis (AGE) has been used extensively for characterization of pure nanomaterials or mixtures of pure nanomaterials. We have evaluated the use of AGE for characterization of Ag nanoparticles (NPs) in an industrial product (described as strong antiseptic). Influence of different stabilizing agents (PEG, SDS, and sodium dodecylbenzenesulfonate), buffers (TBE and Tris Glycine), and functionalizing agents (mercaptosuccinic acid (TMA) and proteins) has been investigated for the characterization of AgNPs in the industrial product using different sizes‐AgNPs standards. The use of 1% SDS, 0.1% TMA, and Tris Glycine in gel, electrophoresis buffer and loading buffer led to the different sizes‐AgNPs standards moved according to their size/charge ratio (obtaining a linear relationship between apparent mobility and mean diameter). After using SDS and TMA, the behavior of the AgNPs in the industrial product (containing a casein matrix) was completely different, being not possible their size characterization. However we demonstrated that AGE with LA‐ICP‐MS detection is an alternative method to confirm the protein corona formation between the industrial product and two proteins (BSA and transferrin) maintaining NPs‐protein binding (what is not possible using SDS‐PAGE).     

Morphology and size-controlled synthesis of silver nanoparticles in aqueous surfactant polymer solutions

We have employed a number of reducing and capping agents to obtain Ag(0) metallic nanoparticles of various sizes and morphologies. The size and morphology were tuned by selecting reducing and capping agents. Spherical particles of 15 and 43 nm diameter were obtained when 1 wt% aqueous starch solution of AgNO₃ precursor salt was reduced by d(+)-glucose and NaOH, respectively, on heating at 70 °C for 30 min. Smaller size particles obtained in the case of d(+)-glucose reduction has been attributed to the slow reduction rate by mild reducing agent d(+)-glucose compared to strong NaOH. Conducting the reduction at ambient temperature of silver salt in liquid crystalline pluronic P123 and L64 also gave spherical particles of 8 and 24 nm, respectively, without the addition of any separate reducing agent. NaOH reduction of salt in ethylene glycol (11 g)/polyvinyl pyrolidone (PVP; 0.053 g) mixture produced large self-assembled cubes of 520 nm when smaller (26–53 nm) star-shaped sharp-edged structures formed initially aggregated on heating the preparation at 190 °C for 1 h. Increasing the amount of PVP (0.5 g) in ethylene glycol (11 g) and heating at 70 °C for 30 min yielded a mixture of spherical and non-spherical (cubes, hexagons, pentagons, and triangle) particles without the addition of an extra reducing agent. Addition of 5 wt% PVP to 1 wt% aqueous starched solution resulted in the formation of a mixture of spherical and anisotropic structures when solution heated at 70 °C for 1 h. Homogeneous smaller sized (29 nm) cubes were synthesized by NaOH reduction of AgNO₃ in 12.5 wt% of water-soluble polymer poly(methyl vinyl ether) at ambient temperature in 30 min reaction time.     

两种晶型酞菁氧钒纳米颗粒的制备及形成机理

在水溶液中利用激光消融制备了酞菁氧钒(VOPc)相I型纳米颗粒，在加入一种非离子型表面活性剂的情况下通过激光消融制备得到了其相II型纳米颗粒.X射线衍射(XRD)、紫外可见吸收光谱(UV-Vis)和傅立叶变换红外光谱(FT-IR)表征了其纳米颗粒中的晶体结构.扫描电子显微镜(SEM)观察显示相I和相II型酞菁氧钒纳米颗粒的直径分别约为100和60 nm.对相II型酞菁氧钒纳米颗粒的形成机理进行了讨论.     

Laser-induced Fourier transform ion cyclotron resonance mass spectrometry of organic and inorganic compounds: methodologies and applications

The combination of a laser with a Fourier transform ion cyclotron resonance mass spectrometer (FTICRMS) enables a variety of MS experiments to be conducted. The laser can be used either as an intense photonic source for the photoionization of neutral species introduced in a variety of ways into the FTICR cell, or it can be made to directly interact with a solid, generating gas-phase ions. Depending on the experimental conditions used, various laser-matter interactions can occur. When high laser energy (also referred to as power density or irradiance) is used, laser ablation (LA) processes lead to the release of species into the gas phase, a significant fraction of which are ionic. The number of ions decreases with the irradiance. For low irradiance values, the so-called laser desorption (LD) regime applies, where the expelled species are mainly neutrals. LA–FTICRMS and LD–FTICRMS can be used to study a wide range of materials, including mineral, organic, hybrid and biological compounds (although matrix-assisted laser desorption ionization, MALDI, which is not reviewed in this paper, is more commonly applied to biological compounds). This paper will review a selection of methodological developments and applications in the field of laser ionization FTICRMS, LD–FTICRMS, and LA–FTICRMS for the analysis of organics and inorganics in complex mixtures, emphasizing insoluble materials. Specifically, silicate- and carbon-based complex materials as well as organic compounds will be examined due to their relevance to natural environmental and anthropogenic matrices.     

Fast Imaging of Laser-induced Plasma Emission from a ZnO Target

The spatio-temporal evolution of plasma plume laser ablation zinc oxide target was investigated by ICCD camera fast imaging. The plasma was created by a KrF excimer laser of 248 nm wavelength and 25 ns pulse. The laser fluence was set at 2 J/cm². This study was performed under vacuum and oxygen atmosphere at a pressure range of 10^− 6 to 10 mbar.Free expansion, splitting and stopping of the plume were observed at different pressures and time delays following the laser pulse. Moreover, depending on the gas pressures, the photography shows some turbulence for given time delays in the front edge of the plasma while at 5 and 10 mbar the whole plasma edge is perturbed. Rayleigh–Taylor instability is proposed as an explanation to this observed effect. A time integrated emission spectroscopy diagnostic has been also used to identify plasma species. A plasma emission spectrum shows the presence of Zn⁺, Zn and O emission lines both in vacuum and in O₂ atmosphere. As the distance from the target surface increases the Zn⁺ emission line disappears.     

Extracellular biosynthesis of silver nanoparticles using the fungus Aspergillus fumigatus

Development of reliable and eco-friendly process for synthesis of metallic nanoparticles is an important step in the filed of application of nanotechnology. One of the options to achieve this objective is to use natural processes such as use of biological systems. In this work we have investigated extracellular biosynthesis of silver nanoparticles using Aspergillus fumigatus. The synthesis process was quite fast and silver nanoparticles were formed within minutes of silver ion coming in contact with the cell filtrate. UV–visible spectrum of the aqueous medium containing silver ion showed a peak at 420 nm corresponding to the plasmon absorbance of silver nanoparticles. Transmission electron microscopy (TEM) micrograph showed formation of well-dispersed silver nanoparticles in the range of 5–25 nm. X-ray diffraction (XRD)-spectrum of the silver nanoparticles exhibited 2θ values corresponding to the silver nanocrystal. The process of reduction being extracellular and fast may lead to the development of an easy bioprocess for synthesis of silver nanoparticles.     

The mechanism of silver granular electrodeposits formation

Granules as a possible form of metal electrodeposit can be formed during deposition of metals, such deposition processes being characterized by large exchange current density values. Because of this, zero nucleation zones around growing grains are formed, permitting granular metal growth. In some cases of prolonged deposition, macro-crystalline deposits can be formed as well as granular ones, e.g. in the case of silver deposition at overpotentials lower than the critical value for dendrite growth initiation. The mechanism of granular deposit growth as a final form of metal electrocrystallization is proposed. Silver boulders were deposited on␣platinum and silver substrates. At low deposition potentials, various crystallographic forms, some of them ideal or derived from cube-octahedron-type morphology, were obtained as a result of independent grain growth inside zones of zero nucleation. In addition to cube-octahedra, twinned and multiply twinned silver particles were also observed. The nucleation density was found (1) to increase with increasing deposition overpotential, (2)␣to decrease with increasing silver concentration, and (3) to be greater on Ag than on Pt for the same deposition overpotential and dendrite precursors. Increasing overpotential leads to increase of density of twinned grains. The grain growth at greater overpotentials from more concentrated solution is less ideal, producing a granular deposit on prolonged deposition. Received: 21 April 1997 / Accepted: 18 September 1997     

Kinetics of silver nanoparticle growth in aqueous polymer solutions

Silver nanoparticles were prepared in aqueous AgNO₃ solution by using hydroquinone and sodium citrate as reducing agents with neutral polymers poly(vinylpyrrolidone) and poly(vinyl alcohol) as stabilizers. The rate of particle formation was determined with a diode array UV-Vis spectrophotometer. The effects of the polymer concentration on the reaction rate, the size, and the size distribution of the particles formed were studied by transmission electron microscopy. Both the reaction rate and the size of silver nanoparticles decreased with increasing polymer concentration in the range 0.07–0.50 w/v%.     

One-step synthesis of amino-dextran-protected gold and silver nanoparticles and its application in biosensors

A sensitive method for the detection of the lectin protein concanavalin A (Con A) was developed using amino-dextran (AD)-protected gold (AD-Au) and silver nanoparticles (AD-Ag) as sensitive optical probes. The AD-Au and AD-Ag nanoparticles were synthesized by directly applying amino-dextran as a reductive and protective reagent. The size of the nanoparticles could be altered by changing the molar ratio of AD to the metal salt. The amino-dextran bound to Con A by forming a 4:1 Au-Con A complex at neutral pH, and the nanoparticles were induced to aggregate by Con A. The absorption intensity of the nanoparticles decreased linearly with as the Con A concentration was increased from 3.85×10^–8 to 6.15×10^–7 M. The Au-Con A complex was dissociated by the disaccharide isomaltose, which has a higher affinities for Con A than Au; this competitive strategy could also be used to detect similar types of saccharides.     

Enhancement on the structural,functional, optical and morphological properties of temperature treated silver sulfide nanostructures

The Silver Sulfide (Ag₂S) nanostructures were synthesized via the facile co-precipitation method. Thorough study and analysis were carried out to reveal and compare the structural, optical, functional, and morphological characteristics of as-synthesized samples annealed at various temperatures. The XRD analysis characterized the structural properties of Ag₂S nanoparticles, which unveiled the excellent crystallinity and monoclinic structure. The as-synthesized samples show an average crystallite size of 52 nm–41.7 nm. The modes of vibration and peak position of metal sulfides in Ag₂S nanoparticles were investigated through the FTIR technique. The optical attributes of prepared samples were scrutinized using UV–Vis analysis, which portrays the cut-off wavelength in the range of 1192–1223 nm for non-annealed and annealed Ag₂S nanoparticles, alongside the optical band gap is about 0.86 eV–0.96 eV. This work elucidates a novel approach to synthesis and scrutinises the characteristics of Ag₂S nanoparticles by subjecting them to distinct annealing temperatures precisely, as-prepared, 200 °C and 400 °C.     

Formation and characterization of surfactant stabilized silver nanoparticles: a kinetic study

Kinetic data for the silver nitrate–ascorbic acid redox system in presence of three surfactants (cationic, anionic and nonionic) are reported. Conventional spectrophotometric method was used to monitor the formation of surfactant stabilized nanosize silver particles during the reduction of silver nitrate by ascorbic acid. The size of the particles was determined with the help of transmission electron microscope. It was found that formation of stable perfect transparent silver sol and size of the particles depend upon the nature of the head group of the surfactants, i.e., cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulphate (SDS) and Triton X-100. The silver nanoparticles are spherical and of uniform particle size, and the average particle size is about 10 and 50 nm, respectively, for SDS and CTAB. For a certain reaction time, i.e., 30 min, the absorbance of reaction mixture first increased until it reached a maximum, then decreased with [ascorbic acid]. The reaction follows a fractional-order kinetics with respect to [ascorbic acid] in presence of CTAB. On the basis of various observations, the most plausible mechanism is proposed for the formation of silver nanoparticles.