Length scale heterogeneity in lateral gradients of poly(N-isopropylacrylamide) polymer brushes prepared by surface-initiated atom transfer radical polymerization coupled with in-plane electrochemical potential gradients

We report the preparation and characterization of poly(N-isopropylacrylamide) (PNIPAAm) polymer brushes exhibiting controlled lateral variations in the patchiness of polymer chains. These gradients were achieved through an atom transfer radical polymerization (ATRP) grafting-from approach utilizing surfaces on which the spatial profile of the initiator density was carefully controlled. Initiator density gradients were formed on Au by first preparing a hexadecanethiol (HDT) density gradient, by reductive desorption using a laterally anisotropic electrochemical gradient. The bare areas in the original HDT gradient were then back-filled with a disulfide initiator, (BrC(CH3)2COO(CH2)11S)2. The initiator coverage was characterized by X-ray photoelectron spectroscopy (XPS). Then, surface-initiated ATRP was utilized to transfer the initiator density gradient into gradients of PNIPAAm chain density. Ellipsometry, surface plasmon resonance (SPR), and atomic force microscopy (AFM) were used to characterize these PNIPAAm density gradients. The defining characteristic of the PNIPAAm gradients is the evolution of the morphology from discontinuous mushroom structures at extremely low grafting densities to heterogeneous patchy structures at intermediate grafting densities. The size of the patchy domains gradually increases, until at a high grafting density region, the morphology evolves to a smoother, presumably more extended, structure.     

Growth of poly(methyl methacrylate) brushes on silicon surfaces by atom transfer radical polymerization

Poly(methyl methacrylate) (PMMA) brushes are grown by surface‐initiated atom transfer radical polymerization on silicon surfaces at various polymerization temperatures. Kinetic studies show that the layer thickness scales linearly with the degree of polymerization of the polymers under some conditions, indicating a constant graft density of the surface‐attached chains. At high temperatures, the layer growth is a controlled process only for short reaction times, and after a rapid increase, the film growth levels off, and a constant thickness is obtained. At lower reaction temperatures, polymers with a lower polydispersity are obtained, but at the expense of a much slower growth rate. Accordingly, intermediate temperatures yield the highest film thickness on experimentally feasible timescales. The reinitiation of these surface‐grafted PMMA chains at room temperature to either extend the chains or grow a chemically different polyglycidylmethacrylate block demonstrates the presence of active ends and the living nature of the surface‐grafted PMMA chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1758–1769, 2006     

Surface grafting of electrochemically crosslinked poly(3,4-ethylenedioxythiophene) (PEDOT) brushes via surface-initiated ring-opening metathesis polymerization

Herein we demonstrated the preparation of 3,4-ethylenedioxythiophene (EDOT) containing polynorbornylene brushes on Au surfaces via surface-initiated ring-opening metathesis polymerization (SI-ROMP). Using solid-state oxidative crosslinking technique, these polymer brushes were electrochemically converted to conjugated polymer networks. Grazing-angle FTIR spectra of polymer brushes clearly showed the characteristic vibrations of EDOT and norbornylene groups. Furthermore, densely covered Au substrates with polynorbornylene brushes were characterized by using scanning electron microscopy and atomic force microscopy.     

Fabrication of high-aspect-ratio poly(2-hydroxyethyl methacrylate) brushes patterned on silica surfaces by very-large-scale integration process

We used a novel fabricated process including electron beam and isotropic oxygen plasma to generate signal line patterns of polymerized 2-hydroxyethyl methacrylate (HEMA) on patterned Si(1 0 0) surfaces. Isotropic oxygen plasma was introduced to enhance the resolutions of the line and dots patterns of the PHEMA brush are approached to 350 nm and 2 μm, respectively. We established the surface grafting polymerization kinetics of the PHEMA chains on silicon surface by to fit the thickness and number-average molecular weight (M(n)). The propagation rate (k(p)) and active grafting specie deactivation rate (k(d)) lies in the range of ~3.6 × 10(-2) s(-1) M(-1) and 4.8 × 10(-5) s(-1), respectively. The measured thicknesses by ellipsometer and analyzed M(n) of "free" PHEMA by gel permeation chromatography (GPC) are fitted well by the polymerization kinetic model. In addition, aspect-ratios (height/width) are used to define the shape of patterned PHEMA brushes. The high-aspect-ratio of the PHEMA brush line with width of 350 nm is 0.27. We use a graft polymerization/solvent immersion method for generating various patterns of polymer brushes to investigate the deformation of the PHEMA brush through aspect-ratios.     

In situ polymerization of molecular macroclusters on a silica surface: poly(N-isopropylacrylamide) nanofilms

We have found that alcohols, carboxylic acids, and amides self-assemble into a unique molecular architecture, a hydrogen-bonded molecular macrocluster, when they are selectively adsorbed onto silica (glass and oxidized silicon) surfaces in nonpolar solvents such as cyclohexane. In our previous study, this phenomenon could be successfully applied to fabricate molecularly flat and defect-free nanofilms of several tens of nanometers thickness. In this study, we prepared a poly(N-isopropylacrylamide) [poly(NIPAAm)] film on the basis of in situ polymerization of a monomer macrocluster layer formed on silica surfaces and investigated how the molecular arrangement of the adsorbed NIPAAm monomers affects the efficiency of the polymerization of them. Poly(NIPAAm) films were prepared by the following two methods: (1) the one-solution method, the in situ photopolymerization of an NIPAAm monomer adsorption layer on silica in one solution (chloroform, cyclohexane, and toluene), and (2) the solution exchange method, adsorption of NIPAAm monomers onto a silica surface from NIPAAm (0.1 mol %) in chloroform, exhange of the solution to 0.005 mol % NIPAAm in cyclohexane, and then polymerization by UV irradiation. By the solution exchange method, molecularly flat, defect-free, and thermoresponsive films were obtained and the thickness could be controlled by the irradiation time, while only several nanometers thickness could be attained by the one-solution method. The structure of NIPAAm adsorption layers formed in each solution condition was characterized by attenuated total reflection Fourier transform infrared spectroscopy. It was revealed that only the solution exchange procedure induced the beta-sheet-like adsorbed structure of NIPAAm in which the double bonds of neighboring NIPAAm monomers were closely located, which should have resulted in effective polymerization.     

Facile synthesis of thermally stable poly(N-vinylpyrrolidone)-modified gold surfaces by surface-initiated atom transfer radical polymerization

Well-controlled polymerization of N-vinylpyrrolidone (NVP) on Au surfaces by surface-initiated atom transfer radical polymerization (SI-ATRP) was carried out at room temperature by a silanization method. Initial attempts to graft poly(N-vinylpyrrolidone) (PVP) layers from initiators attached to alkanethiol monolayers yielded PVP films with thicknesses less than 5 nm. The combined factors of the difficulty in the controllable polymerization of NVP and the instability of alkanethiol monolayers led to the difficulty in the controlled polymerization of NVP on Au surfaces. Therefore, the silanization method was employed to form an adhesion layer for initiator attachment. This method allowed well-defined ATRP polymerization to occur on Au surfaces. Water contact angle, X-ray photoelectron spectroscopy (XPS), and reflectance Fourier transform infrared (reflectance FTIR) spectroscopy were used to characterize the modified surfaces. The PVP-modified gold surface remained stable at 130 °C for 3 h, showing excellent thermal stability. Thus, postfunctionalization of polymer brushes at elevated temperatures is made possible. The silanization method was also applied to modify SPR chips and showed potential applications in biosensors and biochips.     

Temperature-controlled flow switching in nanocapillary array membranes mediated by poly(N-isopropylacrylamide) polymer brushes grafted by atom transfer radical polymerization

We report actively controlled transport that is thermally switchable and size-selective in a nanocapillary array membrane (NCAM) prepared by grafting poly(N-isopropylacrylamide) (PNIPAAm) brushes onto the exterior surface of a Au-coated polycarbonate track-etched membrane. A smooth Au layer on the membrane surface, which is key to obtaining a uniform polymer film, was prepared by thermal evaporation of approximately 50 nm Au on both exterior surfaces. After evaporation, the inner diameter of the pore is reduced slightly, but the NCAM retains a narrow pore size distribution. PNIPPAm brushes with 10-30 nm (dry film) thickness were grafted onto the Au surface through surface-initiated atom transfer radical polymerization (ATRP) using a disulfide initiator, (BrC(CH3)2COO(CH2)11S)2. Molecular transport through the PNIPAAm polymer brush-modified NCAMs was investigated by real-time fluorescence measurements using fluorescein isothiocyanate (FITC)-labeled dextrans ranging from 4.4 to 282 kDa in membranes with variable initial pore diameters (80, 100, and 200 nm) and different PNIPAAm thicknesses. Manipulating the temperature of the NCAM through the PNIPAAm lower critical solution temperature (LCST) causes large, size-dependent changes in the transport rates. Over specific ranges of probe size, transport is completely blocked below the LCST but strongly allowed above the LCST. The combination of the highly uniform PNIPAAm brush and the monodisperse pore size distribution is critical in producing highly reproducible switching behavior. Furthermore, the reversible nature of the switching raises the possibility of using them as actively controlled filtration devices.     

Ink dependence of poly(dimethylsiloxane) contamination in microcontact printing

Poly(dimethylsiloxane) (PDMS) is the most widely used stamp material in microcontact printing. It has excellent properties with respect to versatility, chemical inertness, and mechanical stability. However, it has an inclination to contaminate printed substrates with low molecular weight siloxane fragments. In this study, it is shown, by a combination of lateral force microscopy, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy, that the extent of the PDMS-induced contamination is dependent on the nature of the ink used. The highest degree of contamination was found for relatively polar inks, whereas apolar alkanethiol inks were found to shield the substrate from contamination. This is interpreted in terms of the contaminating species being polar in nature.     

Tunable micropatterned substrates based on poly(dopamine) deposition via microcontact printing

A simple technique was developed to fabricate tunable micropatterned substrates based on mussel-inspired surface modification. Polydopamine (PDA) was developed on polydimethylsiloxane (PDMS) stamps and was easily imprinted to several substrates such as glass, silicon, gold, polystyrene, and poly(ethylene glycol) via microcontact printing. The imprinted PDA retained its unique reactivity and could modulate the chemical properties of micropatterns via secondary reactions, which was illustrated in this study. PDA patterns imprinted onto a cytophobic and nonfouling substrates were used to form patterns of cells or proteins. PDA imprints reacted with nucleophilic amines or thiols to conjugate molecules such as poly(ethylene glycol) for creating nonfouling area. Gold nanoparticles were immobilized onto PDA-stamped area. The reductive ability of PDA transformed silver ions to elemental metals as an electroless process of metallization. This facile and economic technique provides a powerful tool for development of a functional patterned substrate for various applications.     

Controlled grafting of comb copolymer brushes on poly(tetrafluoroethylene) films by surface-initiated living radical polymerizations

Surface modification of poly(tetrafluoroethylene) (PTFE) films by well-defined comb copolymer brushes was carried out. Peroxide initiators were generated directly on the PTFE film surface via radio frequency Ar plasma pretreatment, followed by air exposure. Poly(glycidyl methacrylate) (PGMA) brushes were first prepared by surface-initiated reversible addition-fragmentation chain transfer polymerization from the peroxide initiators on the PTFE surface in the presence of a chain transfer agent. Kinetics study revealed a linear increase in the graft concentration of PGMA with the reaction time, indicating that the chain growth from the surface was consistent with a "controlled" or "living" process. alpha-Bromoester moieties were attached to the grafted PGMA by reaction of the epoxide groups with 2-bromo-2-methylpropionic acid. The comb copolymer brushes were subsequently prepared via surface-initiated atom transfer radical polymerization of two hydrophilic vinyl monomers, including poly(ethylene glycol) methyl ether methacrylate and sodium salt of 4-styrenesulfonic acid. The chemical composition of the modified PTFE surfaces was characterized by X-ray photoelectron spectroscopy.     

Temperature-responsive chromatography using poly(N-isopropylacrylamide) hydrogel-modified silica.

Poly(N-isopropylacrylamide) (PNIPAAm) has the sharpest phase transition of the class of thermo-sensitive N-alkyl acrylamide polymers. We developed a new method of HPLC using packing materials modified with cross-linked poly(N-isopropylacrylamide) (PNIPAAm) hydrogel. A temperature-responsive surface was prepared by polymerization of NIPAAm in the presence of a cross-linker on the silica support. The surface properties and functions of the stationary phases change in response to the external temperature. Therefore it easily changes the interaction of a solute with the surface with a constant aqueous mobile phase. A temperature-responsive elution behavior was observed on the separation of steroids and PTH-amino acids. The method is expected to be applicable to separation in the pharmaceutical and biomedical fields.     

Two phase transitions of poly(N-isopropylacrylamide) brushes bound to gold nanoparticles

The thermally induced phase transition of the poly(N-isopropylacrylamide) (PNIPAM) brush covalently bound to the surface of the gold nanoparticles was studied using high-sensitivity microcalorimetry. Two types of PNIPAM monolayer protected clusters (MPCs) of gold nanoparticles were employed, denoted as the cumyl- and the cpa-PNIPAM MPCs, bearing either a phenylpropyl end group or a carboxyl end group on each PNIPAM chain, respectively. The PNIPAM chains of both MPCs exhibit two separate transition endotherms; i.e., the first transition with a sharp and narrow endothermic peak occurs at lower temperature, while the second one with a broader peak occurs at higher temperature. With increase of the MPC concentration, the transition temperature corresponding to the first peak only slightly changes but the second transition temperature strongly shifts to lower temperature. The calorimetric enthalpy change in the first transition is much smaller than that in the second transition. The ratio of the calorimetric enthalpy change to the van't Hoff enthalpy change indicates that in the first transition PNIPAM segments show much higher cooperativity than in the second one. The investigation of pH dependence of two-phase transitions further indicates the PNIPAM brush reveals two separate transitions even with a change in interchain/interparticle association. The observations are tentatively rationalized by assuming that the PNIPAM brush can be subdivided into two zones, the inner zone and the outer zone. In the inner zone, the PNIPAM segments are close to the gold surface, densely packed, less hydrated, and undergo the first transition. In the outer zone, on the other hand, the PNIPAM segments are looser and more hydrated, adopt a restricted random coil conformation, and show a phase transition, which is dependent on both concentration of MPC and the chemical nature of the end groups of the PNIPAM chains. Aggregation of the particles, which may also affect the phase transition, is briefly discussed.     

Coil-to-globule-type transition of poly(N-isopropylacrylamide) adsorbed on colloidal silica particles

 The temperature dependence of the dimensions of poly(N-isopropylacrylamide) (PNIPAM) adsorbed on two different colloidal silica particles was studied with dynamic light scattering. The hydrodynamic diameter was measured when the temperature was varied stepwise from 10 to 60 °C. PNIPAM molecules free in solution undergo a conformational transition at the θ temperature. We have found that PNIPAM adsorbed onto silica particles also undergoes a transition below the θ temperature. When a small amount of polymer was adsorbed the coil-to-globule transition at the θ temperature did not occur. Potentiometric titrations showed that the surface charge of the silica particles was not affected by the polymer adsorption. Sodium dodecyl sulfate (SDS) (100–1200 mg/l) was added to improve the stability. The particles with a higher zeta potential required a smaller addition of SDS to prevent coagulation compared to the particles with a smaller surface potential. For low additions of SDS the transition curves of adsorbed PNIPAM were unaffected. For larger additions of SDS the collapse of PNIPAM was shifted to higher temperatures. When as much as 1200 mg/l SDS was added, two regions with weak transitions were observed before the collapse. It was also observed that the presence of SDS results in a smaller adsorption of PNIPAM onto the particles. The addition of SDS strongly increased the magnitude of the electrophoretic mobility of the polymer–particle unit. From the electrophoretic measurements an electrokinetic layer thickness was calculated and it was found to be smaller than the corresponding hydrodynamic layer thickness, as obtained by dynamic light scattering. Received: 14 December 1999/In revised form: 22 February 2000/Accepted: 6 March 2000     

Surface-grafted block copolymer brushes with continuous composition gradients of poly(poly(ethylene glycol)-monomethacrylate) and poly(N-isopropylacrylamide)

Surface-grafted block copolymer brushes with continuous composition gradients containing poly(poly(ethylene glycol) monomethacrylate) (P(PEGMA)) and poly(N-isopropylacrylamide) (PNIPAAm) chains were fabricated by integration of the surface-initiated atom transfer radical polymerization (SI-ATRP) and continuous injection method.Three types of copolymer gradients were prepared: (1) a uniform P(PEGMA) layer was block copolymerized with a gradient PNIPAAm layer (PP1);(2) a gradient P(PEGMA) layer was block copo...     

Protein adsorption on poly(N-isopropylacrylamide) brushes: dependence on grafting density and chain collapse

The protein resistance of poly(N-isopropylacrylamide) brushes grafted from silicon wafers was investigated as a function of the chain molecular weight, grafting density, and temperature. Above the lower critical solution temperature (LCST) of 32 °C, the collapse of the water-swollen chains, determined by ellipsometry, depends on the grafting density and molecular weight. Ellipsometry, radio assay, and fluorescence imaging demonstrated that, below the lower critical solution temperature, the brushes repel protein as effectively as oligoethylene oxide-terminated monolayers. Above 32 °C, very low levels of protein adsorb on densely grafted brushes, and the amounts of adsorbed protein increase with decreasing brush-grafting-densities. Brushes that do not exhibit a collapse transition also bind protein, even though the chains remain extended above the LCST. These findings suggest possible mechanisms underlying protein interactions with end-grafted poly(N-isopropyl acrylamide) brushes.     

Conductive polymer brushes of regioregular head-to-tail poly(3-alkylthiophenes) via catalyst-transfer surface-initiated polycondensation

We describe a new method to grow conductive polymer (CP) brushes of regioregular head-to-tail poly(3-alkylthiophenes) (P3AT) via surface-initiated polycondensation of 2-bromo-5-chloromagnesio-3-alkylthiophene. A simple procedure for the preparation of the Ni(II) macroinitiator by the reaction of Ni(PPh3)4 with photocross-linked poly-4-bromostyrene films was developed. Exposure of the initiator layers to the monomer solution leads to selective chain growth polycondensation of the monomer from the surface, resulting in P3AT brushes in a very economical way. In contrast to the P3AT films prepared by traditional solvent casting methods, our approach leads to mechanically robust CP films, stable against delamination. We believe that our approach will be helpful in the fabrication of all-plastic devices.     

Facile synthesis of high-density poly(octadecyl acrylate)-grafted silica for reversed-phase high-performance liquid chromatography by surface-initiated atom transfer radical polymerization

To introduce high-density polymeric organic phase onto silica, initiator-modified silica was prepared and then surface-initiated atom transfer radical polymerization (ATRP) ("grafting-from" method) was carried out with octadecyl acrylate. The resultant polymer-grafted silica was characterized by diffuse reflectance infrared Fourier transform, suspension-state (1)H NMR, solid-state (13)C cross-polarization magic angle spinning nuclear magnetic resonance (CP-MAS-NMR), solid-state (29)Si-CP-MAS-NMR spectroscopies, elemental analysis and differential scanning calorimetry measurements. ATRP-based poly(octadecyl acrylate)-grafted silica (Sil-ODA(n)-1), was used as a stationary phase in high-performance liquid chromatography (HPLC) and the chromatographic behavior was evaluated by the retention studies of polycyclic aromatic hydrocarbons (PAHs) and aromatic positional isomers. Compared with previous poly(octadecyl acrylate)-grafted silica (Sil-ODA(n)), which was prepared by the "grafting-to" method, we have observed longer retention and greater selectivity for Sil-ODA(n)-1 towards PAHs event at higher temperature.     

Control of surface properties using fluorinated polymer brushes produced by surface-initiated controlled radical polymerization

Surface-grafted styrene-based homopolymer and diblock copolymer brushes bearing semifluorinated alkyl side groups were synthesized by nitroxide-mediated controlled radical polymerization on planar silicon oxide surfaces. The polymer brushes were characterized by X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure (NEXAFS), and time-dependent water contact angle measurements. Angle-resolved XPS studies and water contact angle measurements showed that, in the case of the diblock copolymer brushes, the second block to be added was always exposed at the polymer-air interface regardless of its surface energy. Values of z*/Rg were estimated based on the radius of gyration, Rg, of the grafted homopolymer or block copolymer chains for the grafted brushes and thickness of the brush, z*. The fact that z*/Rg > 1 suggests that all these brushes are stretched. These results support the idea that after grafting the first block onto the surface the nitroxide-end capped polymer chains were able to polymerize the second block in a "living" fashion and the stretched brush so formed was dense enough that the outermost block in all cases completely covers the surface. NEXAFS analysis showed a relationship between the surface orientation of the fluorinated side chains and brush thickness with thicker brushes having more oriented side chains. Time-dependent water contact angle measurements revealed that the orientation of the side chains of the brush improved the surface stability toward reconstruction upon prolonged exposure to water.     

Temperature-sensitive swelling of poly(N-isopropylacrylamide) brushes with low molecular weight and grafting density

Temperature-sensitive poly(N-isopropylacrylamide) (PNIPAAm) brushes with different molecular weights M(n) and grafting densities σ were prepared by the "grafting-to" method. Changes in their physicochemical properties according to temperature were investigated with the help of in situ spectroscopic ellipsometry and in situ attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy. Brush criteria indicate a transition between a brush conformation below the lower critical solution temperature (LCST) and an intermediate to mushroom conformation above the LCST. By in situ ellipsometry distinct changes in the brush layer parameters (wet thickness, refractive index, buffer content) were observed. A broadening of the temperature region with maximum deswelling occurred with decreasing grafting density. The brush layer properties were independent of the grafting density below the LCST, but showed a virtually monotonic behavior above the LCST. The midtemperature ?(half) of the deswelling process increased with increasing grafting density. Thus grafting density-dependent design parameters for such functional films were presented. For the first time, ATR-FTIR spectroscopy was used to monitor segment density and hydrogen bonding changes of these very thin PNIPAAm brushes as a function of temperature based on significant variations of the methyl stretching, Amide I, as well as Amide II bands with respect to intensity and wavenumber position. No dependence on M(n) and σ in the wavenumber shift of these bands above the LCST was found. The temperature profile of these band intensities and thus segment density was found to be rather step-like, exceeding temperatures around the LCST, while the respective profile of their wavenumber positions suggested continuous structural and hydration processes. Remaining buffer amounts and residual intermolecular segment/water interaction in the collapsed brushes above the LCST could be confirmed by both in situ methods.     

Thermoresponsive nanostructured poly(N-isopropylacrylamide) hydrogels made via inverse microemulsion polymerization

The synthesis of nanostructured poly(N-isopropylacrylamide) (polyNIPA) hydrogels by a two-stage polymerization process is reported here. The process involves the synthesis of slightly crosslinked polyNIPA nanoparticles by inverse (w/o) microemulsion polymerization; then, these particles are dried, cleaned and dispersed in an aqueous solution of NIPA and a crosslinking agent (N,N-methylene-bis-acrylamide or NMBA) and polymerized to produce the nanostructured hydrogels. Their swelling and de-swelling kinetics, volume phase transition temperatures (T _VPT) and mechanical properties at the equilibrium swollen state are investigated as a function of the weight ratio of polyNIPA particles to monomer (NIPA). The nanostructured gels exhibit larger equilibrium water uptake, faster swelling and de-swelling rates and similar T _VPT than those of the conventional ones; moreover, the elastic and Young moduli are larger than those of the conventional hydrogels at similar swelling ratios. The fast swelling and de-swelling kinetics are explained in terms of the controlled inhomogeneities introduced by the method of synthesis.