甲胺分子的紫外光解离动力学实验研究

在280—287.5 nm区域内,通过实验测定共振增强多光子电离-时间飞行质谱、碎片离子的分质量激发谱以及光强指数等对甲胺分子的光解离通道进行了研究.实验结果证实甲胺分子在单光子能量范围内存在一个电子排斥态,主要的光解离过程为甲胺分子共振吸收1个光子到达该电子排斥态后解离成中性碎片,然后是中性碎片经多光子共振电离形成碎片离子和碎片离子的进一步解离.     

中性和阳离子丁酮团簇的结构及稳定性的理论研究

使用密度泛函B3LYP方法,在6-31G*和6-311+G**基组水平上计算中性和阳离子丁酮团簇(CH_3COC_2H_5)_n和(CH_3COC_2H_5)_n~+(n 7)的稳定结构,并比较不同尺寸团簇之间的相对稳定性.中性和阳离子丁酮团簇的结构具有相似性:n=3—7时,组成团簇的丁酮的平均几何参数基本相同,单环结构最稳定;随着团簇尺寸的增加,双环结构的稳定性逐渐上升.通过平均结合能、一阶差分能、HOMO-LUMO能隙等计算分析可知:在所研究的各种尺寸团簇中,(CH_3COC_2H_5)_3是最稳定的中性团簇,与实验中的最强峰对应;(CH_3COC_2H_5)_4~+是最稳定的阳离子团簇.通过电离能计算得到丁酮分子的垂直电离能为9.535 eV与实验值相符,同时证明中性和阳离子丁酮二元团簇的结构变化较大.研究结果为实验中丁酮团簇碎片离子的形成机理提供一定的理论依据,并且为进一步研究酮类分子团簇的生长规律提供有价值的信息.     

CH_3I~(2+)的二体、三体解离过程的理论研究

采用密度泛函和耦合簇理论从过渡态的观点对CH_3I~(2+)离子的解离过程进行了计算和分析.优化得到了CH_3I,CH_3I+和CH_3I~(2+)的稳定结构及解离过渡态的几何构型并给出了相应能量,计算的第一、二电离能与实验结果符合.基于母体离子、过渡态和解离碎片的几何结构和能量,对CH_3I~(2+)的两体解离过程和三体解离过程进行了详细分析和讨论.给出了二体、三体解离的可能解离通道,并分析了实验上观测到的解离碎片离子的产生机制.计算结果表明,三重和单重绝热势能面上的一些解离过程表现出明显的差异.     

TWO PHOTONS EXCITED 4d RYDBERG STATE OF AsH3

In this paper, by using resonance enhanced (2+1) multiphoton ionization (REMPI) of AsH₃ and detecting the daughter molecular ions AsH⁺ and As⁺, a long progression discrete structure was obtained from 267 to 291 nm, which obeys the formula ν₀(cm^-1)=68875.3+504.1v′₂+5.26v′²₂. Analysis of the spectrum has revealed that it belongs to 4d Rydberg state transition. Our assignment yields the 4d Rydberg state parameters T_e′=67881.1 cm^-1, ω_e′=495.1 cm^-1 and δ=0.962. Finally the 4d Rydberg state structure of AsH₃ was discussed.     

Magnetic susceptibility of (IPA)2FeCl4, (IBuA)2FeCl4 and (IPA)2CuCi4 (IPA = isopropylammonium ion and IBuA = isobutylammonium ion)

The magnetic susceptibility of (IPA)₂FeCl₄, (IBuA)₂FeCl₄ and (IPA)₂CuCl₄, where IPA = (CH₃)₂CHNH⁺₃ and IBuA = (CH₃)₂CHCH₂NH⁺₃, were measured in the temperature range form 80 K up to a temperature near the melting points of the samples. The results obtained were interpreted in termw of a canted two-dimensional antiferromagnet. The variation of the magnetic susceptibility with the change in the composition was also discussed.     

Computer simulation of a carbon-deposition plasma in CH4

A transport and reaction model of a low-pressure, high-frequency (13.56 MHz) CH₄ plasma used for diamondlike carbon (a-C:H) deposition was developed. The model includes reactions among four molecular species (CH₄, C₂ H₆, C₂H₄, and H₂), five radicals and atom (CH₃, CH₂, CH, C₂H₅, and H), and four ions (CH₄⁺ , CH₃⁺, CH₅⁺, and C ₂H₅⁺). It also accounts for the influence of the sticking coefficient of species at the walls. Calculated values of the dissociation degree for several flow rates are in good agreement with experimental measurements made by quadrupole mass spectroscopy. A simple surface-model based on the hydrogen coverage of surface and ion flux and energy at the substrate surface was established. This model permitted the calculation of the deposition rate on the powered electrode as a function of the power applied to this electrode. Good agreement between experimental and calculated growth rates was obtained when CH₃, C₂H₅, and CH₂ were assumed to participate in film formation, and when hydrogen removal by ion bombardment with variable energy as a function of the power was included in the model     

Adsorption and reactions of CH2I2 on Ru(001) surface

The adsorption and dissociation of CH₂I₂ were studied at 110 K with the aim of generating CH₂ species on the Ru(001) surface. The methods used included X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), temperature programmed desorption (TPD), Auger electron spectroscopy (AES) and work function measurements. Adsorption of CH₂I₂ is characterized by a work function decrease (0.96 eV at monolayer), indicating that adsorbed CH₂I₂ has a positive outward dipole moment. Three adsorption states were distinguished: a multilayer (T_p=200 K), a weakly bonded state (T_p=220 K) and an irreversibly adsorbed state. A new feature is the formation of CH₃I, which desorbs with T_p=160 K. The adsorption of CH₂I₂ at 110 K is dissociative at submonolayer, but molecular at higher coverages. Dissociation of the monolayer to CH₂ and I proceeded at 198–230 K, as indicated by a shift in the I(3d_5/2) binding energy from 620.6 eV to 619.9 eV. A fraction of adsorbed CH₂ is self-hydrogenated into CH₄ (T_p=220 K), and another one is coupled to di-σ-bonded ethylene, which — instead of desorption — is converted to ethylidyne at 220–300 K. Illumination of the adsorbed CH₂I₂ initiated the dissociation of CH₂I₂ monolayer even at 110 K, and affected the reaction pathways of CH₂.     

高分子网络凝胶法低温合成YAG：Tb3+荧光粉

以金属硝酸盐为原料,丙烯酰胺为聚合单体以及N,N-亚甲基双丙烯桥酰胺为胶联剂,采用高分子网络凝胶法在低温下合成精细粒度Y₃Al₅O₁₂:Tb³⁺(YAG:Tb³⁺)荧光粉。分别用热重-差热分析(TG-DTA)、X射线衍射(XRD)、扫描电子显微镜(SEM),以及激发和发射光谱测量对样品进行了表征,考察了烧结温度对样品结晶程度、颗粒大小的影响,以及样品发光性能与烧结温度和Tb³⁺浓度的关系。结果表明:YAG晶相形成温度为850℃;粉体颗粒大小均匀,随着烧结温度的升高,颗粒粒径增大,结晶程度提高;观察到Tb³⁺中4f-5d的吸收带以及⁵D₄-⁷F_j(j=6,5,4,3)的特征发射带,最强吸收与最强发射分别发生在272,541.8 nm,与量子理论(E=1.24/λ)的计算结果相吻合,其发光强度随烧结温度的升高而增强;观察到了Tb³⁺在Y₃Al₅O₁₂中的浓度猝灭现象。     

Study of methyl chalcogen compounds with ultraviolet photoelectron spectroscopy

Dimethyl sulfide, dimethyl selenide, dimethyl telluride, dimethyl disulfide, dimethyl diselenide and dimethyl trisulfide have been studied by ultraviolet photoelectron spectroscopy. For the first time, the high resolution He(I) spectrum of dimethyl trisulfide is reported. However, the main thrust of this work is to examine trends among related compounds. We report the results of correlations of the first three ionization energies of (CH₃)₂X, X = O, S, Se, and Te and of the correlations of the first five ionization energies of (CH₃)₂X₂, X = O, S, and Se with the ionization energies of oxygen, sulfur, selenium, and tellurium. Where possible, orbital trends of isoelectronic molecules were also examined. Finally, we report the results of correlations of the FWHM of the first three bands of CH₃(S)_nCH₃ with the number of sulfur atoms and investigate convergence of the first two orbital bandwidths to the bandwidths of the two highest occupied bands in μ-sulfur.     

有机阳离子对卤素钙钛矿太阳能电池性能的影响

采用第一性原理计算了CH_3NH_3PbI_3中有机部分CH_3NH_3~+和CH_3NH_3的静电特性.结果表明:CH_3NH_3~+具有强的亲电特性,CH_3NH_3的CH_3~-端具有弱亲电性,而NH_3~-端具有弱亲核性.发现在CH_3NH_3PbI_3中CH_3NH_3~+之间强静电排斥作用在相变中起着重要的作用,且在室温条件下CH_3NH_3~+在无机笼中具备活性和无序的特性,使得TiO_2/CH_3NH_3PbI_3异质结中n型TiO_2的电子通过界面扩散到CH_3NH_3PbI_3材料,并与CH_3NH_3~+结合形成CH_3NH_3,CH_3NH_3的静电特性导致在内建电场作用下更容易取向,取向的CH_3NH_3周围形成的静电场会变得更弱和更加均匀.这对无机框架上载流子的产生和传输更加有利,这样的异质结比传统的pn结具有更大优势.这是CH_3NH_3PbI_3太阳能电池高的光电转换效率的重要原因.     

ANALYSIS OF F′0+u ION-PAIR STATE OF IODINE

The optical-optical double resonant multiphoton ionization (OODR-MPI) technique and the fluorescent excitation spectroscopy technique have been applied to the study of the F′0⁺_u ion-pair state of iodine. This paper presents OODR-MPI spectrum and fluorescent excitation spectrum of I₂ in the region of 54000-55300cm^-1 by the three-photon resonant, two-photon ionization (1+2+2) and (1+(1+1)+2) processes.     

Particle simulation of radio-frequency plasma discharges of methanefor carbon film deposition

Particle-in-cell/Monte Carlo (PIC/MC) simulations of capacitively coupled radio-frequency (RF) glow discharges were carried out for low pressure CH₄ plasmas. The present computational scheme includes the motions and collisions of both neutral and charged particles. The CH₄ plasma is modeled by combining a one-dimensional PIC/MC method with a polyatomic particle collision scheme. The model considers the motions of CH₄, CH₄⁺, CH₃, C₂H₅, H₂, H, and electrons. Space and time dependent results show ionization rate is high at the sheath region. The dissociation rate of CH₄ is found to be high at the sheath as well as in the plasma bulk. Deposition rate of carbon film is calculated by sampling impinging particles at at the powered electrode. The calculations show that neutral radicals are the major depositing species for the cases studied. Ion energy impinging to the electrode was found to be strongly dependent on the “imposed” dc bias (as opposed to self-bias) voltage for a given RF voltage. Deposition rate was found to be almost independent of the “imposed” dc bias voltage as the RF voltage remained constant     

The synthesis of allyl ether functionalized siloxane monomers under ultrasonic irradiation at ambient conditions

The novel class of cationic UV-curable allyl ether functionalized siloxane monomers type CH₂=CH---CH₂---O---R---O---Si(CH₃)₃ and type CH₂=CH---CH₂---O---R---O---Si(CH₃)₂---O---R---CH₂---CH=CH₂ have been synthesized in excellent yields in short times at ambient temperature conditions in the absence of any added catalyst by the classical silylation reactions of homoallyloxyalcohols with chlorosilanes under ultrasonic irradiation.     

A theoretical study of CHx chemisorption on the Ni(100) and Ni(111) surfaces

Cluster model calculations have been performed for CH_x, x = 0−3, chemisorbed on Ni(100) and Ni(111). The predicted chemisorption energies, at the present level of theory, based on bond-prepared clusters for Ni(100) are for carbon 150 kcal/mol, for CH 136 kcal/mol, for CH₂ 91 kcal/mol and for CH₃ 46 kcal/mol. The corresponding energies for Ni(111) are for CH 120 kcal/mol, for CH₂ 88 cal/mol and for CH₃ 49 kcal/mol. These chemisorption energies lead to similar stabilities for all CH_x fragments on both Ni(100) and Ni(111). Large basis sets and multi-reference correlation treatments are found to be very important in particular for the multiply bonded species. The vibrational C-H stretching frequencies predicted for CH_x on Ni(111) are for CH 3054 cm⁻¹ (2980 cm⁻¹), for CH₂ 3204 cm⁻¹ and for CH₃ 2709 cm⁻¹ (2680 cm⁻¹), where the available experimental values are given in parent The predicted ionization spectra of adsorbed CH_x are also in general agreement with experimental findings.     

大气压甲烷针-板放电等离子体中粒子密度和反应路径的数值模拟

甲烷针-板放电与重油加氢耦合形成甲烷转化重油加氢,可实现重油高效加氢并增产高附加值低碳烯烃,有实践应用前景和科学研究意义.建立二维流体模型,对大气压甲烷针-板放电等离子体进行数值模拟,得到电场强度、电子温度和粒子密度的空间与轴向分布,总结反应产额并提炼生成各种带电和中性粒子的关键路径.模拟结果表明,CH_3~+和CH_4~+密度与电场强度和电子温度的轴向演化接近且密切相关;CH_5~+和C_2H_5~+密度沿轴向先增大后减小;CH_3与H密度的空间和轴向分布几乎相同;CH_2,C_2H_4与C_2H_5的粒子密度分布在靠近阴极的区域内明显不同而在正柱区内较为相像;电子与CH_4发生电子碰撞电离生成的CH_3~+和CH_4~+,CH_3~+和CH_4~+分别与CH_4发生分子碰撞解离生成C_2H_5~+和CH_5~+;电子与CH_4间的电子碰撞分解是生成CH_3,CH_2,CH和H的主导反应;CH_2与CH_4和电子与C_2H_4发生的反应分别是生成C_2H_4和C_2H_2的关键路径;电子与CH_4间的电子碰撞分解反应和CH_2与CH_4发生的反应的产额各占H_2总产额的52.15%和47.85%.     

氯化氢共振多光子电离光谱：F1Δ2态的光谱微扰分析

通过共振多光子电离-飞行时间法, 记录了氯化氢分子在84800-85700 cm^-1范围内, F¹Δ₂ (v’=1) 里德堡态以及V¹∑⁺ (v’=13, 14) 离子对态的电离产物H⁺, ³⁵Cl⁺, H³⁵Cl⁺ 及其同位素的光谱数据. 由于受离子对态V¹∑⁺ 的作用, F¹Δ₂ (v’=1)态呈现出明显的近共振相互作用特性. 为了分析F¹Δ₂与V¹∑⁺态之间存在的光谱微扰, 基于光解离电离通道的分析, 并针对F¹Δ₂ (v’=1)态离子信号比的变化, 将离子信号二能级作用模型优化到三能级的作用模型, 计算得到了微扰强度值为0.6 cm^-1, 预解离系数γ为0.025. 此外, 对于F¹Δ₂ (v’=1) 与V¹∑⁺ (v’=13, 14)态的三个振动能级的光谱峰位置, 采用光谱解微扰法拟合, 同样得到了类似的微扰强度和去微扰后的各光谱参数. 研究表明, 激发至F¹Δ₂ (v’=1)态得到的H⁺, Cl⁺ 离子主要是该态通过与离子对态耦合作用而产生, 而F¹Δ₂ (v’=1) 态光谱位置偏移不仅受离子对态而且还受其他里德堡态作用的影响. 同时, 非零γ 值证实了F¹Δ₂态预解离的存在. 关键词： 光解离电离 里德堡态 离子对态 光谱微扰     

乙胺分子的多光子电离过程质谱研究

报道了乙胺分子在４４０～４７５ｎｍ波长范围内多光子电离（ＭＰＩ）质谱（ＭＳ）研究结果。碎片离子主要由母体离子碎裂模式产生。母体离子ＣＨ３ＣＨ２Ｎ＋·Ｈ２由经３ｓ里德堡态的（２＋２）共振多光子电离产生后，大部分发生β键断裂，形成ＣＨ２＝Ｎ＋Ｈ２离子，还有一部分再吸收一个光子，通过Ｃ－Ｈ（ＣＨ２）键的断裂产生了ＣＨ３ＣＨ＝Ｎ＋Ｈ２离子。ＣＨ３ＣＨ＝Ｎ＋Ｈ２和ＣＨ２＝Ｎ＋Ｈ２离子最容易发生的碎裂过程是脱去氢分子，分别产生Ｃ２Ｈ４Ｎ＋（分子式）离子和ＣＨ≡Ｎ＋Ｈ离子。     

1,2-环己二酮基态光解离反应的理论研究

通过密度泛函理论计算研究了1, 2-环己二酮(α-CHD)基态光解离反应的势能面. 通过IRC方法确定了5个主要的反应通道, 相应的产物分别为P₁(c-C₅H₈O+CO), P₂(2C₂H₄+2CO), P₃(CH₂CHCH₂CH₂CHO+CO), P₄(2CH₂CO+C₂H₄)和P₅(CH₃CHCO+CH₂CHCHO). 获得了反应过程中反应物、产物、中间体和过渡态的结构参数. 详细阐述了这些通道的反应过程, 分析了其反应机理, 总结出最优的反应路径为α-CHD→c-C₅H₈O+CO. 理论分析与实验结果相符. 获得的结果为进一步进行与1, 2-环己二酮相关的研究提供有价值的信息.     

(C_5H_(11)N_2)~+和(C_7H_(12)N_2)~(2+)的NMR研究

结合1H NMR,13C NMR谱,分别对钨、钼配合物{WO2(C10H6O2)2(C5H11N2)2[H2N(CH2)3NH2]}3(1),{(C5H11N2)2[H2N(CH2)3NH2][MoO2(C10H6O2)2]}(2),{(C7H12N2)2[MoO2(C10H8O2)2]}(3)晶体结构中小分子环进行了归属.其中,配合物1和2中(C5H11N2)+的NMR研究证实了六元环由1,3-丙二胺和乙腈化合而成,配合物3中(C7H12N2)2+的NMR谱图证实了七元环由乙二胺和乙酰丙酮化合而成,并且推导出这些亲核加成-消除反应的反应机理.配合物1~3中的小分子环的合成在其它体系中尚未见报导,而在合成它们的反应中作为新产物随主体晶体析出,并由晶体结构解析和NMR得到了证实.     

丁酮分子的多光子电离-离解机理

研究了丁酮分子经(n0,3d)共振的多光子电离-离解机理(MPID).多光子电离-飞行时间质谱测得的主要离子产物是C2H3O+和CH3CH+2,C2H3O+的强度为CH3CH+2的2～5倍,还有少量C2H+2,C2H+3和CH+3离子,未见到母体离子.主要离子产物的分质量多光了电离谱结构相似,而各离子产物的光强指数不同.实验结果说明丁酮分子的多光子电离-离解机理符合母体离子阶梯模型,文中用梯开关模型对主要产物离子的产生机理进行了解释.