新型可聚合激光染料及双发色团共聚物的合成

通常染料激光的工作介质是染料溶液,因而限制了在一些技术领域的应用.因此近年来人们将研究兴趣转移到固体激光染料[1～3].激光染料的固体基质相对于其液体溶液存在着显著的技术优势:紧密性、可加工性、无毒、不易燃、无蒸发、易于器件集成化等等.聚合物或硅胶均可用作激光染料的固体基质,用作基质的聚合物与激光染料有很好的相容性,光均一性,且其制作成本低廉.近期报道将激光染料与甲基丙烯酸甲酯进行共聚得到了性能优良的固体激光材料[4],由于激光染料与聚合物链直接相连,减少了耗能,避免了染料过快的降解,大大提高了其光稳定性和激光输出…     

一种花菁染料-表面活性剂水溶液体系的电子吸收光谱和荧光光谱的研究

本文报道了N,N'-二甲基硫代花菁染料与十二烷基硫酸钠水溶液体系的电子吸收光谱和荧光光谱, 应用Kasha的分子激光理论讨论了光谱特征与染料聚集状态的联系, 给出了这一体系中分子聚集状态变化的清晰     

染料增感过氧化酯体系引发的可见激光感光性高分子

由过氧化物3,3′,4,4′-四叔丁基过氧碳酰二苯甲酮和香豆素酮染料所组成的光引发体系对可见光敏感,致使感光树脂可以用氩离子激光曝光。感光树脂的敏度有赖于基体树脂,当用聚N-乙烯基-2-吡咯烷酮为基体树脂时,对波长488nm的氩离子激光可获得0-01mJ/cm²的高敏度。染料对过氧化物的敏化是由于电子从染料激发态转移到过氧化物而引起的。     

脉冲激光光声量热装置的研制及用之对香豆素激光染料无辐射跃迁过程的研究

本文报道了一套适用于液相体系的高灵敏度脉冲激光光声量热装置的建立。用此仪器对香豆素激光染料C428, C47和C120的无辐射过程进行了研究, 测得它们在无水乙醇中的无辐射跃迁量子产额分别为0.50, 0.47和0.38。     

脉冲激光光声量热装置的研制及用之对香豆素激光染料无辐射跃迁过程的研究

本文报道了一套适用于液相体系的高灵敏度脉冲激光光声量热装置的建立。用此仪器对香豆素激光染料C428,C47和C120的无辐射过程进行了研究,测得它们在无水乙醇中的无辐射跃迁量子产额分别为0.50,0.47和0.38。     

萘酰亚胺及其含二茂铁二元化合物的分子间(内)三重态能量传递

近年来萘酰亚胺类化合物作为超分子体系中的功能单元逐渐引起了人们的重视,如快速响应的光开关体系[1]、生物荧光探针体系[2]、激光染料天线分子[3]等.     

新型双发色团染料荧光光谱及其寿命的研究

有效的染料激光操作需要较高的荧光量子效率,若丹明是在500~700 nm光谱区中一类最重要的激光染料.然而,染料的基态分子和三线态对辐射能量的吸收将会大大降低激光输出效率,再者,由于若丹明类染料在紫外区的吸收系数较小,为了有效吸收泵浦能量(如用XeCI准分子激光,308 nm),就必须使用高浓度染料溶液,在这种情况下,若丹明类染料较小的Stokes位移就势必造成基态分子更大的重复吸收,即造成更大的谐振腔损耗^[1].     

方酸菁染料/二芳基碘鑑盐体系引发丙烯酸酯光交联反应

近年来随着高新技术的迅猛发展,激光技术和光化学也随之大量应用到先进材料中,为适应这种发展需要,开发感可见光和近红外光的光敏反应体系已成为十分迫切的研究课题［１,２］．方酸类染料是一类重要的功能性染料,广泛地应用于静电复印、太阳能电池和光记录材料［３］...     

激光染料的荧光寿命

激光染料的荧光寿命(或荧光衰变时间)是一项重要的参数,它与自发辐射的跃迁几率有关,从而与染料激光的输出效率有关。香豆素和若丹明两系列染料的激光调谐范围互相衔接,覆盖从近紫外至红区的波长范围,是最广泛使用的两系列激光染料。它们的荧光寿命数据不全,而且不同年代和不同作者所得数值有差异很大者(例如若丹明590的寿命有高至9ns的,虽然.现在公认为4ns左右)。这是因为激光染料的寿命大都很短,一般为数毫微秒,要求十分精确的时间分辨探测技术,而且要避免影响分子寿命测量值的各种因素。我们使用现代测量辐射寿命最精确的时间相关单光子计数技术,测量了一些激光染料的荧光寿命,并探讨了寿命与分子结构的关系。     

四甲川苯乙烯菁染料的合成及其激光性能

合成了一系列四甲川苯乙烯菁染料。以Nd:YAG锁模激光倍频(532nm)作泵浦源,测定了染料的激光性能,包括激光调谐范围、中心激光波长、激光转换效率及稳定性。探讨了该类分子结构与其激光性能之间的关系。     

荧烷染料的光诱导显色反应和机制的研究

荧烷染料是一类重要的功能性染料,广泛地应用于热敏和压敏记录材料.通常采用在酸作用下,使荧烷染料发生显色反应,由内酯环结构的无色体生成开环结构的有色体.并且通过吨环上不同取代基得到各种色调.荧烷染料有色体不稳定,在一般有机介质中容易发生褪色反应,使得荧烷染料作为记录介质普遍存在着色稳定性差、保存期短的缺点.为了改善有色体的稳定性,人们进行了大量的工作^[1-3],但均未取得重要进展.考虑到荧烷染料母核上带有烷胺基取代基,具有电子给体特性,有可能通过电子转移反应的途径进行显色反应.实现这种电子转移显色过程的关键问题是选择合适的电子受体.为此采用盐类化合物如碘盐和硫盐作为电了受体,因为它们容易和不同电子给体组成电子转移光敏反应体系^[4-6].因此,本文研究了以荧烷染料为电子给体和碘盐为电子受体的光致电子转移显色反应,并提出了显色反应机制.     

Surfactants having polyfluoroalkyl chains. II. Syntheses of anionic surfactants having two polyfluoroalkyl chains including a trifluoromethyl group at each tail and their flocculation-redispersion ability for dispersed magnetite particles in water

Anionic surfactants having two polyfluoroalkyl chains per molecule, i.e. the sodium salt of bis(1H, 1H, 2H,2H-heptadeca-fluorodecyl)-2-sulfosuccinate, CF₃(CF₂)₇(CH₂)₂OCOCH₂CH(SO₃Na)COO(CH₂)₂(CF₂)₇CF₃, the sodium salt of bis(1H, 1H, 2H, 2H-tridecafluoro-octyl)-2-sulfosuccinate, CF₃(CF₂)₅(CH₂)₂OCOCH₂CH(SO₃Na)COO(CH₂)₂(CF₂)₅CF₃, and the sodium salt of bis(1H, 1H, 2H, 2H-nonafluorohexyl)-2-sulfosuccinate, CF₃(CF₂)₃(CH₂)₂OCOCH₂CH(SO₃Na)COO(CH₂)₂(CF₂)₃CF₃, have been prepared from maleic anhydride, the corresponding alcohols possessing a polyfluoroalkyl chain and sodium hydrogen sulfite. The flocculation and redispersion abilities of these surfactants for dispersed magnetic particles in water have been examined to investigate the effect of the chain length. It was found that this ability was enhanced by an increase in the chain length. The contact angles for water for pelleted surface-modified magnetite have been measured. In order to compare this ability and the contact angles, data for other fluorinated surfactant have been obtained. The Kraff point, the surface tension and the pNa of the aqueous surfactant solutions have also been measured.     

Electrochemistry and spectroelectrochemistry of tert-butylcalix[4]arene bridged bis double-decker lutetium(III) phthalocyanine, Lu2Pc4 and dimeric lutetium(III) phthalocyanine, Lu2Pc2(OAc)2

In this study, electrochemical, electrochromic and spectroelectrochemical properties of a tert-butylcalix[4]arene bridged bis double-decker lutetium(III) phthalocyanine (Lu₂Pc₄ 2) were investigated explicitly as compared with a tert-butylcalix[4]arene bridged dimeric lutetium(III) phthalocyanine [Lu₂Pc₂(OAc)₂ 1]. Distinctive differences between electrochemical and electrochromic properties of 1 and 2 were detected. Moreover, the properties of 1 and 2 were compared with previously reported S₄(CH₂)₄ bridged Lu₂Pc₂(OAc)₂ and Lu₂Pc₄. The calixarene bridged phthalocyanine (Pc) compounds, 1 and 2 showed well-defined electrochromic behaviour with green-blue and blue-purple colour transitions. The enhanced electrochromic properties of 2, as compared to 1, were attributed to its double-decker structure, probably allowing the formation of suitable ion channels for the counter ion movement in the solid film.     

Phosphinegold(I) derivatives of the metal-rich metallaborane, HFe4(CO)12BH2: a novel phosphine exchange involving cation and cluster-bound phosphine ligands

The preparation and characterisation of three new gold(I) phosphine derivatives of the ferraborane, HFe₄(CO)₁₂BH₂ are reported. In HFe₄(CO)₁₂(AuPPh₃)BH (2), the AuPPh₃ fragment formally replaces an Fe---H---B bridging hydrogen atom in the parent compound HFe₄(CO)₁₂BH₂. A comparison between 2 and the structurally characterised di-gold derivative, Fe₄(CO)₁₂(AuPPh₃)₂BH (1) is made to gain insight into the relative site preference for the heavy metal fragments in 1. Preparation of the bis(triethylphosphine)gold(I) derivative of HFe₄(CO)₁₂BH₂ from the PPN⁺ salt of its conjugate base illustrates a novel exchange reaction between the PPh₃ groups in the PPN⁺ cation and the initially, gold-associated PEt₃ groups. This leads to a distribution of products Fe₄(CO)₁₂(AuPR₃(AuPR′₃BH where R = R′ = Ph (1) or R = R′ = Et (3) or R = Ph and R′ = et (4).     

ansa-Metallocene derivatives XXXIII. 2-Dimethylamino-substituted bis-indenyl zirconium dichloride complexes with and without a dimethylsilyl bridge: syntheses, crystal structures and properties in propene polymerization catalysis

Bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (2-(CH₃)₂N-C₉H₆)₂ZrCl₂, and dimethylsilyl-bridged bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂, were prepared by reaction of the corresponding ligand lithium salts with ZrCl₄ in toluene. Diffractometric structure determinations reveal C₂-symmetric complex geometries for both complexes. An increased electron density at the Zr center of the dimethylamino-substituted complexes is indicated by reduction potentials which are 0.3–0.4 V more negative than those of their unsubstituted analogs. When activated with methyl aluminoxane in toluene solution, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂ catalyzes the polymerization of propene to polymers with a microstructure comparable with that of polymers produced with other Me₂Si-bridged bis(indenyl)ZrCl₂ complexes, but with a substantially increased fraction of i-propyl end groups derived from alkyl exchange between Zr-polymer and Al---Me species.     

Ruthenium(II) complexes with mono and ditertiary arsines and phosphines and their reaction with small molecules

Dichlorotetrakis(dimethylsulphoxide)ruthenium(II) reacts with AsPh₃ AsMePh₂, AsMe₂Ph and SbPh₃ in ethanolic hydrochloric acid solution to yield the complexes RuCl₂(DMSO)₂(AsPh₃)₂, RuCl₂(DMSO) L₂ (L = AsMePh₂, AsMe₂Ph, SbPh₃) respectively. The treatment of ruthenium(II) blue solution with AsMePh₂, AsMe₂Ph and SbPh₃ in alcohol resulted in the formation of the complexes; RuCl₂L₃ (L = AsMePh₂, AsMe₂Ph and SbPh₂), respectively. The reaction of RuCl₂(DMSO)₄ with the bidentate ligands 1,2 bis (diphenylarsino)methane (DPAM), 1,2 bis(diphenylarsino)ethane (DPAE) and 1,2 bis (diphenylphosphino)methane (DPPM). 1,2 bis(diphenylphosphino)ethane (DPPE), in ethanol gave the complexes RuCl₂(DPAM)₂, RuCl₂(DPAE)₂, RuCl₂ (DPPM)₂ RuCl₂(DPPE)₂, respectively. The complexes thus obtained undergo reaction with carbon monoxide, hydrogen, molecular nitrogen and nitric oxide to yield a variety of mixed ligand complexes.     

[Ph4P][CpTi(1,2-S2C6H4)2]: Synthese und Molekülstruktur eines anionischen, tetragonal-pyramidal koordinierten Benzol-1,2-dithiolato-Komplexes des Titans

The reaction of CpTiCl₃ with two equivalents of 1,2(LiS)₂C₆H₄ and one equivalent of Ph₄PBr in acetone/pentane affords the new anionic titanium(IV) complex [Ph₄P][CpTi(1,2-S₂C₆H₄)₂], which has been characterized by chemical analysis and by ¹H NMR and IR spectroscopy. The structure of the five-coordinated, half-sandwich bis(dithiolato)titanate anion in the tetraphenyl phosphonium salt has been determined by an X-ray diffraction study. The anion has the two five-membered TiS₂C₂ chelate rings folded along the S---S axes by 36 and 23°, with one chelate ligand plane arranged exo, the other endo in relation to to the Cp ligand.     

高氯酸铕的双亚砜配合物研究

本文报告了高氯酸铕的高、低熔点双(正-辛基亚砜)乙烷和双(苯基亚砜)乙烷的四个配合物:Eu(ClO₄)₃(α-BOSE)₃·2H₂O(Ⅰ)、Eu(ClO₄)₃(β-BOSE)₄·2H₂O(Ⅱ)、Eu(ClO₄)₃(α-BPhSE)₃(Ⅲ)和Eu(ClO₄)₃(β-BPhSE)₄·2H₂O(Ⅳ)的合成及性质。     

Effects of Different Eelectron-withdrawing Moieties on the General Photoelectric Properties of Fluorene-based Dimers

Here, 9,9,9'-tris(4-butoxyphenyl)-9H-9'H-2,2'-difluorene(DF) was synthesized as a reference for compa-rison, and diphenyl sulfone and triphenylphosphine oxygen were introduced to the 9-position of fluorene through a C-H coupling reaction to produce two fluorene-based oligomers 9',9'-[sulfonylbis(4,1-phenylene)]bis[9,9,9'-tris-(4-butoxyphenyl)-9H,9'H-2,2'-bifluorene](DF)₂SO₂ and phenylbis(4-{9,9',9'-tris(4-butoxyphenyl)-9H,9'H-[2,2'-bif-luorene]-9-yl}phenyl)phosphine oxide[(DF)₂PO]. Solid powders of all the three compounds exhibit excellent thermal stability with thermal temperature at 5% mass loss of 375, 429 and 383℃ for (DF)₂SO₂, (DF)₂PO and DF. In addition, owing to the distorted molecular structure and weak electron-absorbing ability of the acceptor, (DF)₂SO₂ and (DF)₂PO do not have obvious intramolecular charge transfer characteristics, and exhibit stable localized 394 nm/375 nm fluorescence emission peaks in different polar solvents. The absolute luminescence quantum efficiencies of (DF)₂SO₂, (DF)₂PO and DF solid powders are 20.83%, 10.03% and 59.46%. Compound DF has the highest quantum yield as an electron donor. The chromaticity coordinates of the blue OLED devices based on DF and DF₂SO₂ fabricated by solution spin coating were (0.19, 0.10) and (0.19, 0.11), which were closest to the deep blue region, and the corresponding maximum external quantum efficiencies are 1.45% and 0.87%, respectively, which are higher than that of (DF)₂PO(0.25%) and consistent with the difference in the solid-state quantum efficiency between them.     

Synthesis of Mg5(CO3)4(OH)2·4H2O with Flower-like Microstructure and Its Catalytic Activity for Transesterification of Dimethyl Carbonate with Phenol

A novel flower-like hydrated magnesium carbonate hydroxide,Mg_5(CO_3)_4(OH)_2·4H_2O,with micro-structure composed of individual thin nano-sheets was synthesized using a facile solution route without the use of template or organic surfactant.Reaction time has an important effect on the final morphology of the product.The micro-structure and morphology of Mg_5(CO_3)_4(OH)_2·4H_2O were characterized by means of X-ray diffractometry(XRD),field-emission scanning electron microscopy(FE-SEM).Brunauer-Emmett-Teller(BET)surface areas of the samples were also measured.The probable formation mechanism of flower-like micro-structure was discussed.It was found that Mg_5(CO_3)_4(OH)_2·4H_2O with flower-like micro-structure was a novel and efficient catalyst for the synthesis of diphenyl carbonate(DPC)by transesterification of dimethyl carbonate(DMC)with phenol.