Al3+掺杂的CuZn铁氧体的结构，电学和磁学特性

采用固相合成反应技术制备纳米Cu_0.5Zn_0.5Fe_2-xAl_xO₂(x=0.0,0.1,0.2,0.3,0.4和0.5)铁氧体材料,研究Al³⁺含量对结构,电学和磁学性质的影响. 采用X射线衍射研究单相立方尖晶石结构. 利用Scherrer公式估算晶粒尺寸. 测定了温度依赖的直流电阻率.结果表明随Al³⁺含量的增加,晶格常数减小,孔隙度增加,饱和磁化强度值降低,Al³⁺对铁氧体的介电常数、介电损耗角的正切值和介质损耗因子等介电性能有明显影响,这可能与空间电荷极化有关.     

Structure and magnetic properties of Ni0.5Zn0.5Mn0.5-xMoxFe1.5O4 ferrites prepared by sol-gel auto-combustion method

A series of Mo doped Ni-Mn-Zn ferrites compounds with the formula Ni_0.5Zn_0.5Mn_0.5-xMo_xFe_1.5O₄ (x = 0, 0.025, 0.05, 0.075 and 0.1) were first synthesized by sol-gel auto-combustion method. The X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR), and vibrating sample magnetometer (VSM) analysis were carried out to characterize the microstructural and magnetic properties of ferrites. Rietveld refinement of X-ray diffraction data confirmed the formation of cubic spinel structure and the emergence of FeMoO₄ phase with the substitution of Mo⁶⁺ contents. The grain size increased remarkably due to the formation of the liquid phase. The saturation magnetization (M_s) increased while the coercivity (H_c) decreased from 67.3 to 12.1 Oe due to the decrease of magneto-crystalline anisotropy constant. The initial permeability (μ_i) increased significantly from 34 (x = 0) to 114 (x = 0.075) and later decreased for x = 0.1. In our experiment, Ni_0.5Zn_0.5Mn_0.425Mo_0.075Fe_1.5O₄ ferrite presented the best microstructure and soft magnetic properties.     

Magnetic behavior of the oxide spinels: Li0.5Fe2.5−2x Al x Cr x O4

In order to study the effect of substitution of Fe³⁺ by Al³⁺ and Cr³⁺ in Li_0.5Fe_2.5O₄ on its structural and magnetic properties, the spinel system Li_0.5Al _x Cr _x Fe_2.5?2x O₄ (x=0.0, 0.2, 0.4, 0.5, 0.6 and 0.8) has been characterized by X-ray diffraction, high field magnetization, low field ac susceptibility and ⁵⁷Fe Mossbauer spectroscopy. Contrary to the earlier reports, about 50% of Al³⁺ is found to occupy the tetrahedral sites. The system exhibits canted spin structure and a central paramagnetic doublet was found superimposed on magnetic sextet in the Mössbauer spectra (x>0.5).     

Solvothermal one-step synthesis of MWCNTs/Ni0.5Zn0.5Fe2O4 magnetic composites

A magnetic multi-walled carbon nanotubes-based (MWCNTs-based) composite, MWCNTs/Ni_0.5Zn_0.5Fe₂O₄, was synthesized via a facile solvothermal approach. The composites were characterized by X-ray diffraction analysis, transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and vibrating sample magnetometry. The results confirmed that MWCNTs and Ni_0.5Zn_0.5Fe₂O₄ coexisted in the composites. The TEM and HRTEM results showed a thick layer of Ni_0.5Zn_0.5Fe₂O₄ was intimately connected to the surface of MWCNTs. The saturation magnetization value of the composites was 45.8 emu/g. Furthermore, the probable synthesis mechanism of the magnetic composites was also investigated based on the experimental results.     

A comparative study of different concentrations of pure Zn powder effects on synthesis,structure, magnetic and microwave-absorbing properties in mechanically-alloyed Ni–Zn ferrite

In this study, a powder mixture of Zn, Fe₂O₃ and NiO was used to produce different compositions of Ni_1−xZn_xFe₂O₄ (x=0.36, 0.5 and 0.64) nanopowders. High-energy ball milling with a subsequent heat treatment method was carried out. The XRD results indicated that for the content of Zn, x=0.64 a single phase of Ni–Zn ferrite was produced after 30 h milling while for the contents of Zn, x=0.36 and 0.5, the desired ferrite was formed after sintering the 30 h-milled powders at 500 °C. The average crystallite size decreased with increase in the Zn content. A DC electrical resistivity of the Ni–Zn ferrite, however, decreased with increase in the Zn content, its value was much higher than those samples prepared by the conventional ceramic route by using ZnO instead of Zn. This is attributed to smaller grains size which were obtained by using Zn. The FT-IR results suggested two absorption bands for octahedral and tetrahedral sites in the range of 350–700 cm⁻¹. The VSM results revealed that by increasing the Zn content from 0.36 to 0.5, a saturation magnetization reached its maximum value; afterwards, a decrease was observed for Zn with x=0.64. Finally, magnetic permeability and dielectric permittivity were studied by using vector network analyzer to explore microwave-absorbing properties in X-band frequency. The minimum reflection loss value obtained for Ni_0.5Zn_0.5Fe₂O₄ samples, about −34 dB at 9.7 GHz, making them the best candidates for high frequency applications.     

一维Ni0.5Zn0.5Fe2O4/SiO2复合纳米结构的制备及其磁性能

采用溶胶-凝胶法结合静电纺丝技术制备了Ni_0.5Zn_0.5Fe₂O₄/SiO₂复合纳米纤维.利用热重-差热分析、X射线衍射、场发射扫描电镜、高分辨透射电镜和振动样品磁强计研究了前驱体纤维的热分解及相转化过程以及焙烧温度和SiO₂含量对目标纳米纤维的相组成、微观结构、形貌及磁性能的影响.结果表明,在450 ℃焙烧时,立方尖晶石结构已基本形成.随着焙烧温度由450 ℃升高到100     

Estimating the cation distributions in the spinel ferrites Cu0.5−xNi0.5ZnxFe2O4 (0.0≤x≤0.5)

Ferrite samples of the composition Cu_0.5−xNi_0.5Zn_xFe₂O₄ (0.0≤x≤0.5) were synthesized by chemical co-precipitation. The samples exhibited a single phase cubic spinel structure, and the saturation magnetization of the samples was found to increase with increasing Zn content. Using a quantum mechanical method proposed by our group, the cation distributions in the samples were estimated. Estimated cation distributions obtained by fitting the magnetic moments of the samples were then used to perform Rietveld fitting for X-ray diffraction patterns. The acceptable error parameters in the Rietveld fitting indicate that the estimated cation distributions in the samples are reasonable.     

Fabrication and magnetic properties of Ni0.50.5Zn0.5Fe2O4 nanofibres by electrospinning

NiZn ferrite/polyvinylpyrrolidone composite fibres were prepared by sol–gel assisted electrospinning.Ni0.5Zn0.5Fe2O4 nanofibres with a pure cubic spinel structure were obtained subsequently by calcination of the composite fibres at high temperatures.This paper investigates the thermal decomposition process,structures and morphologies of the electrospun composite fibres and the calcined Ni0.5Zn0.5Fe2O4 nanofibres at different temperatures by thermogravimetric and differential thermal analysis,x-ray diffraction,Fourier transform infrared spectroscopy and field emission scanning electron microscopy.The magnetic behaviour of the resultant nanofibres was studied by a vibrating sample magnetometer.It is found that the grain sizes of the nanofibres increase significantly and the nanofibre morphology gradually transforms from a porous structure to a necklace-like nanostructure with the increase of calcination temperature.The Ni0.5Zn0.5Fe2O4 nanofibres obtained at 1000 C for 2 h are characterized by a necklace-like morphology and diameters of 100–200 nm.The saturation magnetization of the random Ni0.5Zn0.5Fe2O4 nanofibres increases from 46.5 to 90.2 emu/g when the calcination temperature increases from 450 to 1000 C.The coercivity reaches a maximum value of 11.0 kA/m at a calcination temperature of 600 C.Due to the shape anisotropy,the aligned Ni0.5Zn0.5Fe2O4 nanofibres exhibit an obvious magnetic anisotropy and the ease magnetizing direction is parallel to the nanofibre axis.     

Characterization and magnetic properties of electrospun Co1−x Zn x Fe2O4 nanofibers

By the electrospinning and calcination techniques, we have prepared uniform nanofibers of Co_1−x Zn _x Fe₂O₄ (0.0≤x≤0.5) ferrites with diameters of 110–130 nm. The Co_1−x Zn _x Fe₂O₄ nanofibers are single-phase spinels and the lattice constant with Zn content deviates from the Vegard’s law for these Co_1−x Zn _x Fe₂O₄ nanofibers. The Co_1−x Zn _x Fe₂O₄ nanocrystal grains by which are built nanofibers increase with calcination temperature. Variations of coercivity and saturation magnetization with calcination temperature can be explained in terms of the grain-size (D) effect. The coercivity (H _c) of Co_0.5Zn_0.5Fe₂O₄ nanofibers varies as D ^0.65 and basically follows the predicted D ^2/3 dependence based on the random anisotropy model in a D range below the single-domain size around 40 nm. The saturation magnetization of Co_1−x Zn _x Fe₂O₄ nanofibers initially increases with increasing Zn content, reaches a maximum value at x=0.3 and then decreases with further increase of Zn content, while the coercivity exhibits a continuous reduction with the increase of Zn content.     

Remarkable influence on the dielectric and magnetic properties of lithium ferrite by Ti and Zn substitution

The effect of Zn and Ti substitution on the magnetic and electrical properties of Li_0.5Zn_xTi_xMn_0.05Fe_2.45−2xO₄ ferrites (x=0.0 to 0.30 in steps of 0.05) +0.5wt% Bi₂O₃ prepared by a standard ceramic technique has been investigated. Electrical conductivity and dielectric measurements at different temperatures from 300 K to 700 K in the frequency range from 100 Hz to 2 MHz have been analysed. The variation of the real part of dielectric constant (ε^′) and loss tangent (tanδ) with frequency and temperature has been studied; it follows the Maxwell–Wagner model based on the interfacial polarization in consonance with the Koops phenomenological theory. It is found that the permittivity of zinc and titanium substituted lithium ferrite improves and shows a maximum value ( 1.5×10⁵) at 100 Hz for the x=0.25 sample. The dielectric transition temperature (T_d) depends on the concentration of Ti and Zn in Li_0.5Zn_xTi_xMn_0.05Fe_2.45−2xO₄. The saturation magnetization and Curie temperature both decrease with increase in the concentration of Ti and Zn in the ferrite.     

Microemulsion-mediated in-situ synthesis and magnetic characterization of polyaniline/Zn<Subscript>0.5</Subscript>Cu<Subscript>0.5</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanocomposite

Polyaniline/Zn_0.5Cu_0.5Fe₂O₄ nanocomposite was synthesized by a simple, general and inexpensive in-situ polymerization method in w/o microemulsion. The effects of polyaniline coating on the magnetic properties of Zn_0.5Cu_0.5Fe₂O₄ nanoparticles were investigated. The structural, morphological and magnetic properties of as-prepared samples were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectra, scanning electron microscopy (SEM) and magnetic measurements. The morphology analysis confirmed that polyaniline was deposited on the porous surface of magnetic Zn_0.5Cu_0.5Fe₂O₄. It was shown that the saturation magnetization and coercivity of Zn_0.5Cu_0.5Fe₂O₄ decreased after polyaniline coating, which can be interpreted by the interparticle dipole–dipole interactions that contributed to magnetic anisotropy and changed the magnetic properties of the nanoparticles. PACS  74.25.Ha; 81.05.-t; 81.05.Lg     

Structural,morphological, magnetic and dielectric characterization of nano-phased antimony doped manganese zinc ferrites

Nano-phased doped Mn–Zn ferrites, viz., Mn_0.5−x/2Zn_0.5−x/2Sb_XFe₂O₄ for x=0 to 0.3 (in steps of 0.05) prepared by hydrothermal method are characterized by X-ray diffraction, Infrared and scanning electron microscopy. XRD and SEM infer the growth of nano-crystalline cubic and hematite (α-Fe₂O₃) phase structures. IR reveals the ferrite phase abundance and metal ion replacement with dopant. Decreasing trend of lattice constant with dopant reflects the preferential replacement of Fe³⁺ions by Sb⁵⁺ion. Doping is found to cause for the decrease (i.e., 46–14 nm) of grain size. An overall trend of decreasing saturation magnetization is observed with doping. Low magnetization is attributed to the diamagnetic nature of dopant, abundance of hematite (α-Fe₂O₃) phase, non-stoichiometry and low temperature (800 °C) sintering conditions. Increasing Yafet–Kittel angle reflects surface spin canting to pronounce lower M_s. Lower coercivity is observed for x≤0.1, while a large H_c results for higher concentrations. High ac resistivity (~10⁶ ohm-cm) and low dielectric loss factor (tan δ~10⁻²–10⁻³) are witnessed. Resistivity is explained on the base of a transformation in the Metal Cation-to-Oxide anion bond configuration and blockade of conductivity path. Retarded hopping (between adjacent B-sites) of carriers across the grain boundaries is addressed. Relatively higher resistivity and low dielectric loss in Sbdoped Mn–Zn ferrite systems pronounce their utility in high frequency applications.     

Reentrant spin glass behavior and large initial permeability of Co0.5−xMnxZn0.5Fe2O4

A series of polycrystalline ferrites having nominal chemical composition Co_0.50−xMn_xZn_0.5Fe₂O₄ (0<x<0.4) have been synthesized by the solid-state reaction technique. The XRD analysis confirms single phase cubic spinel structure for all compositions. Lattice constant increases from 0.84195 to 0.84429 nm with the increasing Mn content and obeys Vegard's law. The average grain size increases by increasing both Mn content and sintering temperatures. Room temperature saturation magnetization increases for x=0.1 and decreases for increasing Mn content. The coercivity decreases with increasing Mn content due to the decrease of anisotropy constant. A reentrant spin glass behavior of these samples is observed from the zero field cooled magnetization measurements. The real part of the initial permeability increases by increasing both Mn content and sintering temperatures. This is due to the homogeneous grain growth and densification of the ferrites. The highest initial permeability 137 is observed for x=0.4 sintered at 1573 K on the other hand, the highest relative quality factor (2522) is obtained for the sample Co_0.2Mn_0.3Zn_0.5Fe₂O₄ sintered at 1523 K. The Mn substituted Co_0.50−xMn_xZn_0.5Fe₂O₄ ferrites showed improved magnetic properties.     

Mössbauer study of substituted barium ferrite BaFe11−x−y Co0.5Ti0.5Ni x ZnyO19−r

Substituted barium ferrite BaFe_11–x–y Co_0.5Ti_0.5Ni _x Zn_yO_19–r powders were prepared using a coprecipitation method and investigated by X-ray diffraction (XRD) and⁵⁷Fe Mössbauer spectroscopy. The results show that the as-prepared magnetic powders possess the typical hexagonal structure and demonstrate both a good dispersibility and a narrow particle size distribution. The hyperfine fields for all sites decrease slightly asx (ory) increases. The Ni²⁺ ions prefer to occupy the 2a and 12k sites, and Zn²⁺ ions occupy the 4f_IV site.     

The magnetic properties of oxide spinel Li0.5Fe2.5−2xAlxCrxO4 solid solutions

The exchange interactions (J_BB and J_AB are the intra and the inter-sublattice exchange interactions between neighbouring spins, respectively) are obtained by using the general expressions of canting angle and critical temperature obtained by mean field theory of Li_0.5Fe_2.5−2xAl_xCr_xO₄. The expression of magnetic energy of Li_0.5Fe_2.5−2xAl_xCr_xO₄ is obtained for different spin configurations and dilution x. The saturation magnetisation of Li_0.5Fe_2.5-2xAl_xCr_xO₄ is obtained with different values of dilution x. The magnetic phase diagram of Li_0.5Fe_2.5-2xAl_xCr_xO₄ materials is obtained by high temperature series expansions (HTSEs). The critical exponent associated with the magnetic susceptibility of Li_0.5Fe_2.5−2xAl_xCr_xO₄ is deduced.     

Structural,magnetic and optical properties of diluted magnetic semiconductor (DMS) phase of Ni modified CuO nanoparticles

Control on the size of copper oxide (CuO) in the nano range is a highly motivating approach to study its multifunctional nature. The present investigation reports a sol-gel derived Ni doped CuO nanoparticles (Cu_1-xNi_xO). Rietveld refinement of the XRD spectra confirms the formation of single monoclinic phase of Cu_1-xNi_xO nanoparticles having crystallite size within the range of 19–21 nm. Raman spectra show the presence of characteristics Raman active modes and vibrational bands in the Cu_1-xNi_xO samples that corroborate the monoclinic phase of the samples as revealed by refinement of XRD data. The estimated band gap of pure CuO is found to be ∼1.43 eV, which decreases with the increase of dopant concentration into CuO matrix. This result is in line with estimated crystallite size. Magnetization curves confirm the weak ferromagnetic nature of Cu_1-xNi_xO nanoparticles which reveal the DMS phase. This weak magnetic nature may be induced in the samples due to the exchange interaction between the localized magnetic d-spins of Ni ions and carriers (holes or electrons) from the valence band of pristine CuO lattice. Replacement of Cu⁺² by Ni⁺² ions into the host CuO lattice induces the magnetization. The quantified value of squareness ratio (S < 0.5) confirms the inter-grain magnetic interactions in the Cu_1-xNi_xO nanoparticles which is also the reason of weak induced magnetization.     

Effect of cation distribution on the properties of Mn0.2ZnxNi0.8−xFe2O4

Mn_0.2Zn_xNi_0.8−xFe₂O₄ (x=0.2, 0.3, 0.4, 0.5, 0.6) are synthesized by the citrate precursor method. Effects of zinc substitution on DC resistivity, dielectric relaxation intensity, initial permeability, saturation magnetization and Curie temperature have been investigated. It is observed that resistivity increases with increase in zinc concentration up to x=0.5 and then decreases. The observed behaviour is explained in terms of hopping and site preference of ions in the lattice. The main contribution to dielectric relaxation intensity is observed to be due to space charge polarization. Initial permeability is observed to increase with increase in zinc concentration. Saturation magnetization increases up to x=0.4 and then starts decreasing. Canting effect is observed for higher zinc concentrations.     

The magnetic properties of diluted CoFe2O4 nanomaterials

The magnetic properties of （Cox Fe1-x）A （Zn1-x Fe1＋x）B O4 are studied using mean-field theory and the probability distribution law to obtain the saturation magnetization, the coercive field, the critical temperature, and the exchange interactions with different values of D （nm） and x. High-temperature series expansions （HTSEs） combined with the Pade approximant are used to calculate the critical temperature of （CoxFe1-x）A（Znl-xFe1＋x）BO4, and the critical exponent associated with magnetic susceptibility is obtained.     

Novel synthesis of NixZn1?xFe2O4 (0?≤?x?≤?1) nanoparticles and their dielectric properties

Nanocrystalline Ni _x Zn_1−x Fe₂O₄ (0 ≤ x ≤ 1) ferrite powders with average particle size 15–20 nm have been successfully prepared at a very low temperature (180 °C) by a novel auto combustion process using citric acid and ethylenediamine as a coordinating agent and bridging ligand, respectively. Phase purity of the solid solutions has been confirmed by X-ray diffraction. Morphological characterizations of the prepared samples were performed by high resolution transmission electron and field emission scanning electron microscopy. Extensive Fourier transformed infrared spectroscopic characterization has been carried out to identify the plausible mechanism of the synthesis process. Composition-dependent electrical properties (resistivity and dielectric constant) of the synthesized solid solution have been investigated. Interestingly, a non-linear variation of dielectric permittivity with respect to composition has been observed. The room temperature electrical resistivity as well as the dielectric permittivity of Ni_0.5Zn_0.5Fe₂O₄ was found to decrease with the decrease of particle size.     

Ferroelectricity and ferromagnetism in fine-grained multiferroic BaTiO3/(Ni0.5Zn0.5)Fe2O4 composites prepared by a novel hybrid process

Dense, homogeneous, and fine-grained multiferroic BaTiO₃/(Ni_0.5Zn_0.5)Fe₂O₄ composite ceramics are synthesized by a novel powder-in-sol precursor hybrid processing route. This route includes the dispersion of nanosized BaTiO₃ ferroelectric powders prepared via conventional sold-state ceramic process into (Ni_0.5Zn_0.5)Fe₂O₄ ferromagnetic sol-gel precursor prepared via a sol-gel wet chemistry process. The composite ceramics show coexistence of obvious ferroelectric and ferromagnetic hysteresis loops at room temperature. Very low dielectric loss of about 0.02–0.0067 in the range of 10 kHz–10 MHz can be achieved, which is about an order of magnitude lower than the results of many reports using conventional processes at room temperature. The combination of high permeability and permittivity with low losses in the ceramics enables significant miniaturization of electronic devices based on the ceramics.